Smartforms are worse than Scripts.

Hi all,
This is krishna. Let me know at what condition Smartforms are worse than Scripts.
If any one knows pls help me.
Thnx in advance.
Regards,
Krishna.

Hi Krishna..
This is not worse....
script is client dependent.smartform is client independent.
Less programing in smart form.
Multiple page format is possible in smart form
we can maintain background graphics in smartform
Scripts doesnot generate any funtional module where as smart form generates.
Multiple page format not allowed in scripts allowed in sf.
Labelling is possible in scripts not possible in sf.
Script is client dependent and sf is client independent.
Reward Point if Useful..
Thanks & Regards,
S.Suresh.

Similar Messages

Edge signal bars are worse than 3G

Hello there,
I just purchased my 8GB iPhone 3G from Rogers few days ago. I've been using the 3G for a while and my connection is excellent, I always get 5 bars and not seen it drop once yet. I knew that the 3G drains my battery down so I decided to turn it off and run on EDGE network.
I was surprised because my edge never stayed at 5 bars since the time I've tried it. it always began fluctuating from 5 to 2 and usually just stays at around 3 bars. I've also done a restore on my phone hoping it would fix it, but unfortunately it did not. For most people it's the opposite like the 3G is worse than EDGE.
So I was wondering if its a hardware problem or is 3G where I live seems to support the iPhone much better than EDGE? So should I keep it on instead of EDGE then even though it would drain the battery quicker?

I just switched to EDGE and I have full 5 bars but don't know if that's generally the case. I'm rarely on EDGE, since at home, school or work, there's WiFi and otherwise I use 3G.
Btw, Roger's 3G coverage has significantly improved over the past two months, as initially it was so unreliable I was on EDGE pretty much all the time.

How come Maps v2 are worse than v1?

Hello, Nokia
I own a N78 and I'm currently located in Bulgaria. A day ago I decided to upgrade Nokia Maps so I downloaded Map Loader 2 and Nokia Maps 2 from Nokia's site. Installation went normal and everything looked fine when, planning a route today, to my dismay I realized the maps from v2 are missing places that were present on the ones from v.1! Examples are the small villages of Palilula and Gromshin (spelled Gromsin in maps v.1) in Northwestern Bulgaria, and Chukovec in the southwest. All the small villages that were present on Maps v1 are gone since v2, the places where they are located show nothing, not roads, nor the villages themselves, and the search doesn't find them either. What happened? Am I missing something?

Unbelievable. So Nokia made a navigation program with more features but with less detailed maps. Mind you, I'm not talking about one or two spots, basically the entire set of small villages from Bulgaria's map have disappeared, as I've discovered, and thus only big cities remain to which there are enough directions anyway. When you say "in the short term" does this mean there is any chance for the maps to become detailed again? If so, any ideas when this happens as in the present I just can not use the handset for proper navigation? If not, how do I revert back to Maps v.1? I've tried uninstalling v2 but then, when I open the program, it says it cannot open maps, update to ost recent version. I'm figuring Maps v1 cannot use the the maps supplied to v.2, will formatting the phone give me back the good ones?

I have pop up Ads all over my firefox browser, they are worse than ever! Help

Every time I open a new tab there is a pop up ad. Also there are certain words underlined throughout websites that also lead to an ad.

Hello kellynem,
probably your pc infected from malware. Try to remove any toolbar that you have not install from your firefox extensions (firefox button > addons > extensions)
check also control panel > add or remove programs, remove any program not installed by you.
see also : [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware#os=win7&browser=fx23 Troubleshoot Firefox issues caused by malware]
thank you

WTF seems like creative are worse than logitech ROFL, are u even gonna reply creative ?

i have this frigging camera , model PD1170, i can get it to work about /0 times i try ...., i have owned ALOT of diffrent creative devices , i will only mention the sound blaster LIVE ROFL , yeah 5. . Creative will probably block this post b4 anyone gets to read it ....., well i have many many email addys so do as u must creative , but if u dont immediatly figure out what the problem is with this camera , I think here in canada and the US we may have to call for a recall , without any limit of purchase date , cause creative knows full well this cam is garbage , i bought a logitech the other day to replace this piece of garbage , and as usual with logitech , it worked imediatly without a problem , SO why is it that anything creative is missrepresented and never corrected ?
I am beyond irate about this situation , i am tired of paying 2-5X what any other company charges for the same product .... and what do creative do
!!! . looks to me like the are just posting as a newbie to put the blame off on the ppl who buy their garbage , this sounds like an american company to me , it is the consumers fault cause they buy it LOL. well it is the case here , that it is almost impossible to buy anything except creative stuff , u cant get anything turtle beach around here , and creative just keep pumping out this stuff that works only when their ideal configuration is possible ? what is ur answer creative , i can prove that u make garbage that is missrepresented and that u do nothing to correct it , so what are u gonna do to help us b4 we take action ?
eitehr fix it , or recall these , i will never stop till u resolve it creative , do u realy want a consumer war ? cause im in for a good battle with you

There is no need to repost this in several threads... Closing this one.
If you need to speak to a Creative rep, I would recommend you contact Customer Support directly, by phone or e-mail. The forum is for user interaction, not for direct support.
Cat

In which table scripts and smartforms are stored

in which tables scripts and smartforms are stored
eg scripts in tadir.

Hi this may be of some help.
SD
SALES ORDER/ENQUIRY/QUOTATION
Output type         : BA00
ScriptForm Name     : RVORDER01
Driver Program Name : RVADOR01
smartform name
DELIVERY NOTE
Output type         : LD00
ScriptForm Name     : RVDELNOTE
Driver Program Name : RVADDN01
smartform name      : LE_SHP_DELNOTE
Smartform Driver Pgm: RLE_DELNOTE
INVOICE
Output type         : RD00
ScriptForm Name     : RVINVOICE01
Driver Program Name : RVADIN01
smartform name      : LB_BIL_INVOICE
Smartform Driver Pgm: RLB_INVOICE
MM
PUCHASE ORDER/RFQ/CONTRACT
Output type         : NEU
ScriptForm Name     : MEDRUCK
Driver Program Name : SAPMF06P
smartform name      : /SMB40/MMPO_L
smartform driver program: /SMB40/FM06P
GOODS RECEIPT
Output type         : WE01
ScriptForm Name     : WESCHEINVERS1
smartform name      : /SMB40/MMGR1_A
smartform driver program: /SMB40/M07DR
GOODS ISSUE
Output type         : WA01
ScriptForm Name     : WA_SCHEINVERS1
smartform name      : /SMB40/MMGI1_A
smartform driver program: /SMB40/M07DR
FI Forms
Account Statement   : F140_ACC_STAT_01
Cheque Printing     : F110_PRENUM_CHEK
Balance Confirmation: F130_confirm_01
Dunning Form:         F150_DUNN_01
check the link below it provides steps to convert sap scripts to smartforms
http://www.ficoexpertonline.com/downloads/Iyer_SmartForms.pdf
SMARTFORMS -Driver Program
PO: /SMB40/FM06P
SO: /SMB40/RVADOR01
GR: /SMB40/M07DR
with regards,
Hema Sundara.
pls give points if u find this helpful.

Just Updated to Firefox 26.0...Hanging Worse Than Ever.

I just updated to FireFox 26.0 a few hours ago, and now when I visit a site like Wonkette.com, the browser hangs are worse than ever before...and they were bad before. My browser is hanging (becomes completely unresponsive) minutes at a time before it either loads the page, or tries to load it and I get a script error (which takes more minutes to pop up while the browser's unresponsive) before it loads.
God help you if you go anywhere with an IntenseDatabase commenting system or any kind of embedded video player. I have on no add-ons or plug-ins, so it is not that (and they are all up-to-date, anyway, but that's irrelevant).
No, this is not something solved by going into Safe Mode - the seeming catch-all cure that never works, either - so don't even offer that up as a solution. Thanks.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Why SAP Script are Client Dependent, Smartforms are client-independent.

why SAP Script are Client Dependent,Smartforms are client-independent.
Edited by: Srinivasa Reddy Ariga on Oct 27, 2008 12:28 PM
Edited by: Srinivasa Reddy Ariga on Oct 27, 2008 12:49 PM

Before you do anything else, read this: Welcome and Rules of Engagement
Google is your friend. Try keywords smartforms client dependent Next time - search first and ask second.
oh, and it helps to get the correct forum...

Premiere Elements 8 is worse than useless to me

I have to admit, I can't explain why I'm still trying to make Premiere Elements 8 work. I should have given up and moved to another software program by now. I've been on the phone twice with the Customer Service group in India, for over half an hour at a time. Each time they insist they've solved my problem, yet it keeps getting worse. Now, I'm not only having uncontrolled and unexplained system crashes, but hours and hours of work are now corrupted and totally wasted.
Here is a list of the problems I'm having:
1. The primary problem is that Premiere Elements 8 crashes and shuts down in the middle of work with no warning or notice. It happens after about 3-5 minutes of using the software, so I've gotten in the habit of saving my work every time I do anything, no matter how small. Needless to say, you can chart my progress with a sundial. Tedious does not do the process justice.
2. When I save the work, I will get a Project Save Error. It tells me to save to a new location. Of course, it won't let me do that, so I have to exit the program without saving my most recent work. Again, this happens about every 3-5 minutes.
3. Occasionally, when I'm working with a timeline, as I move the cursor up to the menus at the top of the screen, if I am selecting the File or Edit menu, the timeline will scroll left on its own - if I move the cursor off of the Edit or File menu, the scrolling stops.
4. When I am working on a timeline, I will get a "System Memory Running Very Low" warning, along with advice to save immediately and proceed with caution. Of course, when I get that warning, it is already too late, as any attempt to save the work causes the program to crash.
5. Today, we've seen a new thing, and it's completely destroyed two entire projects. When I try to open projects I've previously worked on, large sections of them appear as blood red with the words "Media Offline" in a number of languages. These red sections appear not only on the organizer, but in the timeline as well. It's as if Premiere Elements 8 can't find the media I copied into the timeline even though I've been working on the project for days and have not moved the media from the folder where it always sits.
Saving work after every task - no matter how small - makes doing anything painfully slow and mind-numbingly tedious, but at least it worked - until today. Now, hours and hours of work have been rendered absolutely wasted. I've never encountered a software program with so many fundamental problems. It's almost as if it was created by amateurs. I can honestly say that it does nothing well.
As I said, I've been on the phone twice now with the problem solving group in India, and while they are very nice and courteous, they've done nothing to solve the problems. In fact, the problems have become worse, although I can't say it's because of anything they've done. Both times, they've assured me that they've fixed the problems, and the software works fine while I am on the phone with them - for about 2 or 3 minutes. But then, it works fine for me for the same length of time.
To be honest, I'm not sure why I would call them back. I'll spend an hour clicking on tabs only to be assured that my problems have been solved. Then, 5 minutes later I'm dealing with the same situation - or worse.
I've tried every solution listed on-line for the crashes. I have the 8.01 update, I have the latest video drivers, I've done all of the steps it recommends. Every day that I use the software, it performs worse than the day before.
I'm not sure why I'm writing this - I think I've reached the end of my rope. I doubt these problems can be fixed - maybe I just have a defective copy, who knows. But, I am very close to demanding my money back and saying goodbye to Adobe products for the future.
Thanks for the forum in which to vent.

This is aimed at Premiere Pro, but may help
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0

Video output quality worse than AppleTv 1

Anyone else who owns an atv1 found video looks worse?
I'm not talking about actual video playback but the video output on 2
AppleTV1 looked great through my plasma even though it's not full HD
1080p over hdmi on 1 scaled by the plasma consistently looked best, with crisp but smooth edges to text and GUI.
Atv2 720p over hdmi looks consistently worse - it all looks oversharpened and over contrasty, with text in particular looking very jagged as well as the spinning timer wheel looking pixellated now
Watching a slideshow there seemed to be visible artefacts as some images moved or scaled whereas atv1 just looked silky smooth
Maybe the current GUI text and icons are not as smooth, maybe less antialiasing, poorer quality gpu
Maybe my plasma downscales 720p worse than 1080p - I need to check on the full HD set in another room but first impressions are not that good
Video playback seems strangely artificial too, almost as though the frame rate has been sped up slightly
Weird as the set should handle 50/60Hz without issue

So a few days in it's growing on me.
There's definitely something different about menu graphics but actual video quality for playback is excellent though I'm not sure it's not dropping/catching up frames at times.
I've watched some HD movie trailers and they look excellent.
Video navigation is considerably improved over ATV1, with FF / RW actually working reasonably well when they didn't before over the same connection. Changing chapters gives immediate starts and buffering seems considerably quicker - at least some of this must be due to newer hardware.
I don't like the top level menu much and preferred the older system but you can pretty much stay in Computers to watch own content.
Video playlists don't work properly which is poor but it took ages to get them enabled on ATV1.
There are many glitches but hopefully they'll get ironed out over time.

Joining 2 related records using PL SQL in Apex - Problems when there are more than 2 related records?

Hi
I am combining 2 related records of legacy data together that make up a marriage record. I am doing this in APEX using a before header process using the following code below which works well when there are only 2 related records which joins the bride and groom record together on screen in apex. I have appended a field called principle which is set to 'Y' for the groom and 'N' for the bride to this legacy data
However there are lots of records where in some instances there are 3, 4 , 5, 6 or even 1 record which causes the PL/SQL in APEX to not return the correct data. The difference in these related columns is that the name of the bride or groom could be different but it is the same person, its just that from the old system if a person had another name or was formally known as they would create another duplicate record for the marriage with the different name, but the book and entry number is the same as this is unique for each couple who get married.
How can I adapt the script below so that if there are more than 2 records that match the entry and book values then it will display a message or is there a better possible work around? Cleaning the data would be not an option as there are thousands of rows of where these occurrences occur
declare
     cursor c_mar_principle(b_entry in number, b_book in varchar2)
     is
          select DISTINCT id, forename, surname, marriagedate, entry, book, formername, principle
          from   MARRIAGES mar
          where mar.entry   = b_entry
          and    mar.book = b_book
          order by principle desc, id asc;
     rec c_mar_principle%rowtype;
begin
open c_mar_principle(:p16_entry,:p16_book) ;
fetch c_mar_principle into rec;
:P16_SURNAME_GROOM   := rec.surname;
:P16_FORNAME_GROOM   := rec.forename;
               :P16_ENTRY := rec.entry;
               :P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_GROOMID := rec.id;
fetch c_mar_principle into rec;
:P16_SURNAME_BRIDE   := rec.surname;
:P16_FORNAME_BRIDE   := rec.forename;
               :P16_ENTRY := rec.entry;
               :P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_BRIDEID := rec.id;
close c_mar_principle;
end;

rambo81 wrote:
True but that answer is not really helping this situation either?
It's indisputably true, which is more than can be said for the results of querying this data.
The data is from an old legacy flat file database that has been exported into a relational database.
It should have been normalized at the time it was imported.
Without having to redesign the data model what options do I have in changing the PL/SQL to cater for multiple occurances
In my professional opinion, none. The actual problem is the data model, so that's what should be changed.

New replacement battery worse than old one

My Ibook 12" and battery were on the recall list. I didn't notice to much in the way of heat or bad battery life before the recall, but I thought this was a good chance to get a new battery. Well the new one came and it is way worse than the old one. Fan is running almost constantly, poor battery life, the hard drive side is getting very hot, Charger is running hot. I don't think I want to keep the new battery, any advise.
Thanks in advance

Hi josh and welcome to Apple Discussions.
Firstly, check to see if your new battery is also on the recall list. It has happened…
Secondly, your new battery is subject to Apple's standard 90 day warrantee. If it is defective, irrespective of its recall status, then it should be replaced. Contact your local Applecare and explain, calmly and politely, the problems that you are having and your concerns for your own safety and that of your iBook. An iBook's fan shouldn't run constantly and the charger shouldn't be uncomfortably hot.
You'll do no harm, and might do some good, by doing a PMU reset:
1. If the computer is on, turn it off.
2. Reset the power manager by simultaneously pressing and then releasing Shift-Control-Option-Power on the keyboard. Do not press the fn (Function) key while using this combination of keystrokes.
3. Wait at least 5 seconds.
4. Press the Power button to restart the iBook
Good luck,
Adrian

Is my iPad 2 screen dead, or is it worse than that?

My iPad 2 has suddenly stopped responding. I had put it to sleep by closing the cover, and when I opened it, the screen was black. There have been no drops or other obvious mistreatment.
So I held down the power button, ostensibly to shut it down. No response. Held down the button again, ostensibly to start it up: no response. Tried that many times with same result. Charged the iPad overnight. Still no response (and no little chime sound that usually happens when I plug in to AC power).
iTunes can see the iPad, so maybe the screen is dead. But with the absence of all responses of any kind, I'm wondering whether it's worse than that.
I'm running iOS 7.0.4, so I suppose I could update to 7.0.6 and see if that helps, but since updates can be dodgy, I thought I'd save that as a last resort. (And yes, my AppleCare coverage is history.)
Any thoughts?

Ralph Landry1 Maryland Re: Is my iPad 2 screen dead, or is it worse than that? Apr 14, 2014 6:11 PM (in response to gyandev) Placing your iPad in recovery mode erases all content and settings, why you would do that in your case is a total mystery. You lose everything doing that.
There are alot of problems that could have caused you to have to do this. And no you do not loose everything is you have made regular backups.
Here are some reasons
1) itunes makes a new update for your device, there system is so overloaded with people downloading it that some people who downloaded it our missing packets of information this causes an incorect installation and leads to many pieces of hardware malfunctioning
2)usb conection will sometimes turn on and off during some updates, the program itunes dosent seem to check to make sure all the information went through to complete the installation
when either 1 or 2 occurs it is typically in my expereice that a traditional plug it into itunes and do a recovery will not work, you need to bypass several glitchs the IOS update has caused, which may appear to be hard ware glichs IE battery, screen or even after every attempt the update will just stop.
Their are several key components that make up electronic devices
Ram and catch, they require power or electricty to store data, you either need to drain or remove the battery (sometimes residual charge is left in electronic devices... or you may be able to by pass it or in some situations cause the device to ignore the miss writen data.
The battery may say bad on a basic diagnostic test that apple does, but in fact its perfectly fine.
another piece is the storage media, flash and rotaional drives do not need power to store information only to read/write. Individual sectors will go bad over time, and sometimes falsh data that wasn't caught before this point will be written here.
some batters actually have memory,, HDD and storage media and cpu's all have catch which may need to be wiped clean to make a device functioning the method for doing this is differnt for every piece of hardware and sometimes you do not need to take it apart to do it.
There is also ram, which again needs power to store data and will also make bad sectors over time..
if there your device is fully functioning but seems to be a bit slower/ not as good than when you first recieved it, you may need to consider a complete reset. You might notice when your done that the ram size is different that the storage drive has decreased, those are some of the bad sectors that the computer with its long use produced.
In most cases where there is some type of glich that cannot be solved simply by plugin it into Itunes, you might just need to do this. There are several methods posted, and i have tried them all, and most of the time when i needed them they do not work... I had to think, about this..
I needed to do a full recovery, itunes will crash half way through/ will not do the recovery, i need to provide power while placing the device in DFU mode(what i call a hard rest because its like hitting the master reset), because there is a problem/ glich when i try it pluged into a computer I need to use land power, than i need to conect it to itunes..
IT always works, the other methods do not account for the multitude of malfunctions an operating system can cause. This helps to ignore any catch problems, when you conect to itunes it will finish it without a hitch. than you can place all your apps, photos songs ect back in there.
I have had to do this for my own IOS device as well as several others. I typically do this even for random people or i tell them how to do this. Most of them come to me after being poorly disapointed with what the apple tech said.. for me its like if i took my car in for inspection and they said we had to replace the head piston, headmanifold ect, when whats wrong is just a loose wire...
This method should be done prior to doing any expensive fix's as some of the problems you have "fixed" where never really there..
when i was 8 my farther gave me a SCSi hdd that the technitions at his work couldnt fix/ get to work.. He though i would take it apart and see how it worked.. I read the manual, and power scematic, and i came up with my own fix.. plug a jumper into the - and the + jumper to clear the catch while power was going through.. it worked I had a working scsi.. that thing was bigger than an airport extreme curently on the market. I have always had the ability to trouble shoot sense i was alittle boy... I have fixed garmiin GPS as well i wish they still had the physical power switch and not the analog (it was so much easer to reboot them... I was an aircraft maintainer, i have fixed several other computer problems network issuse, hard ware and so on.. Although i have never taken classes in any of it i have learned on my own, and i understand how the device work rather than being told steps to fix it I can find solution where others cannot because i know how they work.. I think that is better than any colledge grad with no reall world experience in true problem solving.

First 6 core MP results with Logic...and they're worse than the quad

Starting a new thread for this...
Here's the first report I've seen of 6 cores on Logic. Logic shows 6 bars in the CPU meter. But he ran the "evan" benchmark and performance was worse than on a quad at a lower clock speed, only 47 tracks. For comparison, 4 cores (with HT enabled) at 2.26 gave 50 tracks - the new machine has two more cores and 47% higher clock speed.
http://macperformanceguide.com/Reviews-MacProWestmere-LogicStudio.html
For comparison, a while back I simulated six cores by disabling two on my eight core MP 2.26 and got 32 tracks. The difference matches the difference in clock speed. In my test the result for six cores was identical to that of four cores with hyperthreading disabled. My guess is that with the current version of Logic, the six core machines might get a big speed boost if two of the cores are disabled, basically turning it back down to a quad - my estimate would be about 73 tracks.
Logic has lacked support for new machines before, but this is the first time I've actually seen performance get worse with a new machine with more cores (and much faster clock speed). If this doesn't provide incentive for Apple to update for better support of cores, I don't know what will.

Exactly. You would think that if the app wasn't programmed to support four cores, the worst case scenario would be that it would just use four of them and provide the same performance as a quad. But instead it seems like the extra cores confuse the app and it actually performs considerably worse than a quad.
No question they are due for a Logic update asap or get some bad press once word gets out.

I ask for help, I can not cancel a monthly subscription to Adobe! contrary to the tutorial does not appear scribed CANCEL PLAN on my page management plan, is not worse than any serial number of my subscription, where is it? how can I cancel monthly charg

I ask for help, I can not cancel a monthly subscription to Adobe.
contrary to the tutorial does not appear scribed "CANCEL PLAN" on my page management plan, is not worse than any serial number of my subscription, where is it? how can I cancel monthly charge?

Just to clarify: This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
Have you done a Forum search?
How can I delete my account? There is no "cancel plan" in my creative cloud free membership.
Contact Customer Care

Smartforms are worse than Scripts.

Similar Messages

Maybe you are looking for