SMGW doesn't show "registered program" from SM59

Well i have a TCP/IP Destination in SM59 where a "registered program" is used to call this RFC-Destination!
This i have to give in IDoc-Receiver-Channel to get the incoming IDoc from external System (nonSAP) to be processed!
Because i made the same with another System i am not able to figure out what is wrong now. When i try to do a connection test i get error:
ERROR: program XXX not registered
Therefore i checked in SMGW, found the former registered program for the other system, but the new one is not visible. After this i recreated the destination, Test failed again, program is not appearing!
What might be the problem?!
br

well mikes blog focuses on getting an RFC connectivity for a Sender RFC adapter. Now for a RFC sender the connection type for the destination is of type TCP/IP.
But what i pointed out earlier is that in case u are using a IDoc adapter, then the RFC destination should be of type R3. I hope you got the point i am trying to make.
Well i got ur point. But since we have some other scenario which runs that way i doubt that i know need to add a Destination of type R3 since it is also a nonSAP System.
But what are ur steps of connecting an external nonSAP-System or even a program to a R3-System (here it is XI)?!
Can u explain in detail??!
br

Similar Messages

  • System Tray Program doesn't show a form from the menu

    public SysTrayApp()
    ContextMenu TrayMenu = new ContextMenu();
    TrayMenu.MenuItems.Add("Exit", OnExit);
    TrayMenu.MenuItems.Add("Send Mail", SendMail);
    TrayMenu.MenuItems.Add("Add Exception", AddException);
    TrayIcon.Icon = new Icon(SystemIcons.Application, 40, 40);
    TrayIcon.Text = "RJC Server Services";
    TrayIcon.ContextMenu = TrayMenu;
    TrayIcon.Visible = true;
    NewTimer = new System.Timers.Timer(5 * 60 * 1000);
    NewTimer.Elapsed += NewTimer_Elapsed;
    NewTimer.Start();
    void AddException(Object sender, EventArgs e)
    ExceptionList ExceptionForm = new ExceptionList();
    ExceptionForm.ShowDialog();
    This is the code I am trying to use to show a instance of the Exception form. My application is a system tray application, when right clicked it shows menu items, however clicking the add exception menu item doesn't show the form? I have also tried ExceptionForm.Show()
    to no avail. Any ideas?

    figured it out: ExceptionForm.Visible = true;
    Also I had a long running process on form load that took a while to execute before the form was shown.

  • Lightroom 5 doesn't show GPS info from canon 6D

    Lightroom 5 doesn't any longer show GPS info from canon 6D in imported rawfiles. This regards MacOS-version. It works in iPhoto and in Lightroom 5 for Windows 8! Strange...

    I think I was having the same issue - after all I found out that when importing photos via Lightroom, I was overwriting the GPS information by "updating" the metadata by using the preset I used to use for my scanned film photographs. 
    Check the following:
    When importing, on the right hand side you see "Apply During Import"
    If you have the "Metadata" section "None" then this is not the solution for you.  But if you have something else, make sure that you go into "Edit Presets" then UNCHECK "GPS" section of it. 
    Hope this helps. 

  • Firefox doesn't show jpg files from a web page while other browsers do

    I have created a page and uploaded www.nutechequipments.com/equipment.html page doesn't show the jpg files in only firefox everywhere including Dubai. But all the other browsers show the uploaded jpg pictures in perfect manner. In Firefox only the table is loaded with placeholders. It is not a problem with my computer. It is the problem all over the world.
    the sample html code is given below:
    <pre><nowiki><td><img src="equip\equip.jpg" size width="110" height="90"></td><td><img src="equip\equip1.jpg" size width="110" height="90"></td><td><img src="equip\equip (2).jpg" size width="110" height="90"></td><td><img src="equip\equip (3).jpg" size width="110" height="90"></td></nowiki></pre>

    You have backslashes (\: escaped as %5C as seen in Tools > Page Info > Media) in the scr attribute of the images and that doesn't work in Firefox.
    You need to change the backslashes to forward slashes
    <pre><nowiki>equip%5Cequip.jpg
    equip%5Cequip1.jpg
    equip%5Cequip%20(2).jpg
    equip%5Cequip%20(3).jpg
    equip%5Cequip%20(4).jpg
    equip%5Cequip%20(5).jpg
    equip%5Cequip%20(6).jpg
    equip%5Cequip%20(7).jpg
    equip%5Cequip%20(8).jpg
    equip%5Cequip%20(9).jpg
    equip%5Cequip%20(10).jpg
    equip%5Cequip%20(11).jpg
    equip%5Cequip%20(12).jpg
    equip%5Cequip%20(13).jpg
    equip%5Cequip%20(14).jpg
    equip%5Cequip%20(15).jpg
    equip%5Cequip%20(16).jpg
    equip%5Cequip%20(17).jpg
    equip%5Cequip%20(18).jpg
    equip%5Cequip%20(19).jpg
    equip%5Cequip%20(20).jpg
    equip%5Cequip%20(21).jpg
    equip%5Cequip%20(22).jpg
    equip%5Cequip%20(23).jpg
    equip%5Cequip%20(24).jpg
    equip%5Cequip%20(25).jpg
    equip%5Cequip%20(26).jpg
    equip%5Cequip%20(27).jpg
    equip%5Cequip%20(28).jpg
    equip%5Cequip%20(29).jpg
    equip%5Cequip%20(30).jpg
    equip%5Cequip%20(31).jpg</nowiki></pre>

  • IPhoto app doesn't show any photos from my photos app

    I just upgraded my new iPad to iOS 6 beta. Maybe that's the problem but suddenly my iPhoto app doesn't show any photos at all. All the tabs (albums, photos, events, etc) are empty.  When I open the app it says "updating photo library" briefly, but that's it. I tried rebooting, deleting the app and reinstalling it, basically everything I could.  Is this a known iOs6 bug?

    Ok, I have the release and I have the issue, photos are just boxes w no pictures, is there a way to remove library and reload? The photo app works fine and all pictures are there.

  • Task manager on windows server 2008 doesn't show the memory from newly installed 2nd CPU

    Hi,
    We have a dual processor dell power edge t410 running windows server 2008 (64-bit), standard edition. I have recently added a 2nd xeon x5560 quad-core processor (first one is also x5560 with 32GB (4x8) memory) and 16GB ram (4x4). Seems like the new CPU is
    recognized in BIOS, Dell's server admin app and task manager shows 16 vertical boxes (hyper threading is on both cpus) under Performance->CPU Usage History and these boxes show processor load spread relatively evenly across all threads. On the other hand
    the additional memory for this CPU is visible in the BIOS, Dell server admin but not in the task manager, which still shows the 32gb under performance->physical memory. Rammap also shows only 32GB.. Currently running proprietary processes that along with
    the metafile and windows own ring up nearly 30GB, which in turn causes system latency for GUI and apps, as if the additional 16GB are not there...
    So the questions are these:
    1) does anybody know why the added memory doesn't show up in the task manager / rammap?
    2) if the new memory doesn't show up, does this mean that Windows does not use it (which should be impossible if the CPU is utilized, unless I am wrong about windows using the cpu..)?
    Thank you,
    - Kiril

    Thanks for the reply Ravikumar,
    Unfortunately this solution is inapplicable to my version of the OS as it is 64-bit and not 32-bit. Do you have any other ideas?
    Best,
    - Kiril
    Yes, PAE((Physical Address Extension) is supported only on 32-bit versions of the
    Windows, operating system 64-bit versions of Windows do not support PAE. For information about device driver and system requirements for 64-bit versions of Windows, see
    64-bit System Design. The Address Windowing Extension (AWE) API is supported on 32-bit systems. It is also supported on x64 systems for both native and Wow64 applications.
    Useful link for Address Windowing Extensions is:http://msdn.microsoft.com/en-us/library/windows/desktop/aa366527(v=vs.85).aspx
    If the above info does not help you, please contact dell as suggested by
    Shaon Shan.
    Regards, Ravikumar P

  • Trying to import email files but Thunderbird doesn't show any "import from" choices when Outlook 2007 is my default email program

    Have installed, uninstalled and reinstalled Thunderbird, no change. Am going by the how-to article that says "In order to import messages from Outlook to Thunderbird, Outlook must be the default mail client."
    After all this, I will have to move the files from a Windows 7 machine to a new Windows 8 machine which will not have any Office programs on it.

    https://support.mozilla.org/en-US/questions/1031812

  • Desc doesn't show datetime columns from SQl Server

    Hi Everyone,
    I have working db link to sql server using hsodbc:
    Oracle 10.2 on AIX using freetds odbc driver version 0.82.
    I can access tables on sql server but oracle sees only varchars and numerics columns in a table.
    Is there a way to select datetime columns from sql server using hsodbc?

    when hsodbc does not show a certain data type it is commonly related to the fact that HSODBC doesn't support the related ODBC data type.
    In general you have a data type in your SQL Server which is mapped to an ODBC data type by the ODBC driver. HSODBC then maps the ODBC data type to an Oracle equivalent and when the ODBC data type isn't supported by HSODBC it just drops it from the select list.
    So for a root cause analysis an ODBC trace is required to determine the mapping of the FreeTDS ODBC driver.
    With this info we can then compare the mapping documented in the HSODBC manual and if the ODBC data type isn't listed as a supported data type you then need to cast the data type on the source side to a different data type (for example varchar/char).
    So please post the ODBC trace and I'll have a look.
    - Klaus
    Edited by: kgronau on Apr 2, 2013 12:50 PM
    BTW, here the link to the HSODBC docu:
    http://docs.oracle.com/cd/B19306_01/server.102/b14232.pdf
    Oracle® Database
    Heterogeneous Connectivity Administrator's Guide
    10g Release 2 (10.2)
    B14232-01
    B.1 Mapping ANSI Data Types to Oracle Data Types Through an ODBC
    Interface

  • Printer installs, but doesn't show in programs

    This has really caused me some stress. I used this printer when I first got it and my computer for school. It worked great. Then I was out for summer and went back to school and it never would show up as a printer again. I have removed the device and reinstalled it. Everything seems to install just fine when plugged in. Here you can see that is is showing just fine in my devices and printers. However, I cannot set it as the default. 
    When I go into Word (or any program that can print like Acrobat Reader) You can see that here it does not show up: 
    I have plugged it into a different computer and it installed and printed.
    Any ideas would be very helpful!
    Thank you.

    Hi,
    Try following these steps and check if that may help:
    Step one: create a restore point
    These steps involve registry modifications, therefore be sure to create a restore point for any issues.
    From the Start menu type Create into the search bar and click on 'Create a Restore point'.
    Click on Create, select a unique name and create a restore point
    Step two: Assign full permissions t the user and modify the default printer value.
    1. Type regedit into the search bar and open the Registry Editor.
    2. Browse to HKEY_CURRENT_USER > Software > Microsoft > WindowsNT > CurrentVersion.
    3. From the left pane, right click the Windows subfolder and select Permissions.
    4. Click the Add button, type your windows user account name and click on Check, then press OK and select Full Permissions for the user.
    5. Click on add and type everyone, click on Check and press OK, select Full Permissions for Everyone as well.
    6. From the left pane, click the Windows sub folder (under CurrentVersion).
    7. From the right pane, Right click on Device within the name column and select Modify.
    8. Delete any current value and type the following value instead (including the ending colon):
    winspool,Ne00:
    9. Reboot your PC and try setting the printer as default, then try printing from Word again.
    Please let me know the results,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • 1st Gen iPad doesn't show movies imported from iTunes

    When connected to iTunes the iPad shows that they're in there, but when we look on the iPad in the Videos.app there's no movies. The option is not even there. They all work fine in VLC, but that's without metadata, so it's not ideal. We have restored the software twice, from two different backups but this didn't solve the problem. Thanks for your assistance.

    This my "stock" answer for this issue and I'm sure that you have tried the first thing, but take look at the second suggestion and see if that works for you.
    Quit the video app and restart. Go to the home screen first by tapping the home button. Quit the app by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on the video app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the video app icon to close it. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Try the app again and see if the movie is there and will play.
    If that didn't work - Search for the movie. From the home screen swipe to the right and the Spotlight Search feature will appear. Type the name of the movie in the field at the top, if the movie shows up in the search, tap on the icon and hopefully it will begin to play. Let it play for a few minutes then tap Done. Return to the video app and see if it is in there now.

  • Aperture doesn't show video imported from Canon 5D Mk 3

    When I'm importing video to Aperture 3 from Canon 5D Mk 3, the files show up in Aperture with black screen. Sound is OK and the duration is unchanged but there's no image. In Finder, Quicktime and for example After Effects the video shows up normally so I can convert it to other formats, but that way it's more complicated than it should be.
    Also, when using Compressor to convert the files the end result is the same. Haven't tried to import the videos to Final Cut Pro X yet... Has this happened to anyone else and what can I do to fix this? I tried to import a file to my girlfriend's Aperture 3 and it worked normally there.

    Thanks, but can you elaborate as I'm new to both video and FCE. What are the item property of the clips versus in the sequence, can you advise me what settings to use, how can I find these properties? any info will help
    Cheers

  • Submission to App Store Doesn't show Bundle ID from Flex iOS App

    We built an iOS app using Flashbuilder 4.6 and Air 3.6.  We provisioned iPads successfully and deployed to the devices. Everything worked great.  When we attempted to submit the app to the Apple iTunes Connect didn't show our Bundle ID in it's drop down. This being the case, we were unable to submit the app.

    thank you for answer but when i open my mac for the first time i can't update from app store and i download and install it manually from http://support.apple.com/kb/dl1715
    but if i've already install then it should show that i've installed isn't it

  • Ical doesn't show all calendars from icloud

    I don't all the calenders from icloud from my ipad 2 and ,my iphone 4, anyone has similar problem? and happen to know what steps I missed??

    Gabriella,
    Sometimes making the Calendar window bigger, or using full screen allows additional text to be displayed.
    View>"Make Text Smaller" is also an option for those with Eagle Eyes.

  • After reinstall, Aperture 1.5.1 doesn't show vault images from backup drive

    Hi folks,
    Okay, I am stuck. For some reason Aperture would not start when I double click the icon, so I reinstalled it from the disk and upgraded it to 1.5.1. I have all the images I was using before the crash backed up in a vault on my back up drive but when I open Aperture the folders and project do not appear in Aperture. I right click on the vault and say open with Aperture.app but nothing happens and I can't seem to access the files with Aperture.
    If anyone can help, it would be really great and appreciated.
    Thank you
    Scott

    Hi Scott,
    Have you checked the Aperture - > Preferences and library location?
    Default should be ~/Pictures/Aperture Library.aplibrary
    Is there a ~/Pictures/Aperture Library.aplibrary in Finder?
    If so, how large it is? does it seem to contain the images(sizewise)?
    Restoring vault:
    Have you tried opening Aperture, select File - Vault - Restore Library
    hth

  • WSDL chooser on 10.1.2.0.2 doesn't show entries from .wsil config

    Hi,
    I've noticed that the linux version of BPEL JDeveloper doesn't show the entries from the integration/orabpel/system/services/install/config/inspection.wsil config file in the WSDL chooser.
    Is there a fix for this?
    Toby

    Does anyone know if this problem can be resolved?

Maybe you are looking for