SMPlayer - Segmentation Fault - QXcbShmImage: shmget() failed (22)

Hello,
when I'm watching a video playlist in SMPlayer there comes a time the video ends and when smplayer have to go to the next video it exit just with the "segmentation fault" meesage. This does not happens always, just randomly. I've downloaded the latest built from smplayer in order to see if it was solved but it isn't. With this latest smplayer build I got more exit information. I didn't know where ends the log from one song and where the next song log begins, so I've pasted from the last time I see a reference for the previous one:
Debug: Recents::addItem: '/home/josealb77/Música/Mitis Mahi etc/Touch Tour Mixify Set_135838810 - MaHi.mp3'
Debug: BaseGui::updateRecents
Debug: BaseGui::checkPendingActionsToRun
Debug: BaseGui::checkMplayerVersion
Debug: MplayerVersion::isMplayerAtLeast: comparing 25158 with 37224
Debug: Core::checkIfVideoIsHD
Debug: MplayerProcess::parseLine: audio_info_changed
Debug: Core::initAudioTrack
Debug: Core::initAudioTrack: num_items: 0
Debug: Core::initAudioTrack: list of audios:
Debug: Tracks::list: item 0: ID: 0 lang: '' name: ''
Debug: Core::initializeMenus
Debug: BaseGui::initializeMenus
Debug: Core::initAudioTrack: selecting initial track
Debug: Core::changeAudio: ID: 0, allow_restart: 1
Debug: changeAudio: ID: 0
Debug: MplayerVersion::isMplayerAtLeast: comparing 21441 with 37224
Debug: Core::tellmp: 'switch_audio 0'
Debug: Core::setVolume: 100
Debug: Core::tellmp: 'volume 100 1'
Debug: Core::updateWidgets
Debug: DefaultGui::updateWidgets
Debug: BaseGui::updateWidgets
Debug: Core::displayMessage
Debug: Core::updateWidgets
Debug: DefaultGui::updateWidgets
Debug: BaseGui::updateWidgets
Debug: Core::updateWidgets
Debug: DefaultGui::updateWidgets
Debug: BaseGui::updateWidgets
Debug: DefaultGui::enableActionsOnPlaying
Debug: BaseGui::enableActionsOnPlaying
Debug: MplayerProcess::parseLine: ''
Debug: MplayerProcess::parseLine: 'ID_AUDIO_TRACK=0'
Debug: Core::forward
Debug: Core::seek: 60
Debug: Core::tellmp: 'seek 60 0'
Debug: Core::changeOSD: 1
Debug: Core::pausing_prefix
Debug: MplayerVersion::isMplayerAtLeast: comparing 27665 with 37224
Debug: Core::tellmp: 'pausing_keep_force osd 1'
Debug: Core::updateWidgets
Debug: DefaultGui::updateWidgets
Debug: BaseGui::updateWidgets
Debug: Core::forward
Debug: Core::seek: 60
Debug: Core::tellmp: 'seek 60 0' '
Debug: MplayerProcess::parseLine: ''osition: 3 %'
Debug: MplayerProcess::parseLine: ''
Debug: Core::forward
Debug: Core::seek: 60
Debug: Core::tellmp: 'seek 60 0' '
Debug: MplayerProcess::parseLine: 'Position: 5 %'
Debug: Core::forward
Debug: Core::seek: 60
Debug: Core::tellmp: 'seek 60 0' '
Debug: MplayerProcess::parseLine: 'Position: 6 %'
Debug: Core::forward
Debug: Core::seek: 60
Debug: Core::tellmp: 'seek 60 0' '
Debug: MplayerProcess::parseLine: 'Position: 8 %'
Debug: Core::forward
Debug: Core::seek: 60
Debug: Core::tellmp: 'seek 60 0'
Debug: Core::forward
Debug: Core::seek: 60
Debug: Core::tellmp: 'seek 60 0' '
Debug: MplayerProcess::parseLine: ''osition: 10 %'
Debug: MplayerProcess::parseLine: ''osition: 11 %'
Debug: MplayerProcess::parseLine: ''
Debug: Core::goToPosition: value: 992
Debug: Core::goToSec: 3654.000000
Debug: Core::tellmp: 'seek 3654 2'
Debug: MplayerProcess::parseLine: ''
Debug: MplayerProcess::parseLine: '[equalizer] Limiting the number of filters to 9 due to low sample rate.'
Debug: MplayerProcess::parseLine: '[equalizer] Limiting the number of filters to 9 due to low sample rate.'
Debug: MplayerProcess::parseLine: '[equalizer] Limiting the number of filters to 9 due to low sample rate.'
Debug: MplayerProcess::parseLine: 'AO: [pulse] 32000Hz 2ch floatle (4 bytes per sample)'
Debug: MplayerProcess::parseLine: '[equalizer] Limiting the number of filters to 9 due to low sample rate.'
Debug: MplayerProcess::parseLine: ''equalizer] Limiting the number of filters to 9 due to low sample rate.'
Debug: MplayerProcess::parseLine: 'Position: 99 %'
Debug: MplayerProcess::parseLine: ''
Debug: MplayerProcess::parseLine: ''O: [pulse] 44100Hz 2ch floatle (4 bytes per sample)'
Debug: MplayerProcess::parseLine: ''
Debug: Core::sforward
Debug: Core::seek: 10
Debug: Core::tellmp: 'seek 10 0' '
Debug: MplayerProcess::parseLine: ''osition: 99 %'
Debug: MplayerProcess::parseLine: ''
Debug: Core::sforward
Debug: Core::seek: 10
Debug: Core::tellmp: 'seek 10 0' '
Debug: MplayerProcess::parseLine: ''osition: 99 %'
Debug: MplayerProcess::parseLine: ''
Debug: MplayerProcess::parseLine: ''
Debug: MplayerProcess::parseLine: ''
Debug: MplayerProcess::parseLine: ''
Debug: MplayerProcess::parseLine: 'Exiting... (End of file)'
Debug: MplayerProcess::parseLine: detected end of file
Debug: MplayerProcess::parseLine: 'ID_EXIT=EOF'
Debug: MplayerProcess::parseLine: detected end of file
Debug: MyProcess::procFinished
Debug: MyProcess::procFinished: Bytes available: 0
Debug: MplayerProcess::processFinished: exitCode: 0, status: 0
Debug: MplayerLayer::playingStopped
Debug: Screen::playingStopped
Debug: Screen::setAutoHideCursor: 0
Debug: Screen::playingStopped
Debug: Screen::setAutoHideCursor: 0
Debug: Core::processFinished
Debug: Core::processFinished: we_are_restarting: 0
Debug: Core::processFinished: play has finished!
Debug: BaseGui::displayState: Stopped
Debug: BaseGui::togglePlayAction
Debug: Core::processFinished: exit_code: 0
Debug: Core::updateWidgets
Debug: DefaultGui::updateWidgets
Debug: BaseGui::updateWidgets
Debug: DefaultGui::disableActionsOnStop
Debug: BaseGui::disableActionsOnStop
Debug: BaseGui::checkStayOnTop
Debug: Playlist::playNext
Debug: Playlist::chooseRandomItem
Debug: * free items: 64
Debug: * items:
Debug: * item: 1
Debug: * item: 2
Debug: * item: 3
Debug: * item: 4
Debug: * item: 5
Debug: * item: 6
Debug: * item: 7
Debug: * item: 8
Debug: * item: 9
Debug: * item: 10
Debug: * item: 11
Debug: * item: 12
Debug: * item: 13
Debug: * item: 14
Debug: * item: 15
Debug: * item: 16
Debug: * item: 17
Debug: * item: 19
Debug: * item: 20
Debug: * item: 21
Debug: * item: 22
Debug: * item: 24
Debug: * item: 25
Debug: * item: 26
Debug: * item: 27
Debug: * item: 28
Debug: * item: 29
Debug: * item: 30
Debug: * item: 31
Debug: * item: 32
Debug: * item: 33
Debug: * item: 34
Debug: * item: 35
Debug: * item: 36
Debug: * item: 37
Debug: * item: 38
Debug: * item: 39
Debug: * item: 40
Debug: * item: 41
Debug: * item: 42
Debug: * item: 43
Debug: * item: 44
Debug: * item: 45
Debug: * item: 46
Debug: * item: 47
Debug: * item: 48
Debug: * item: 49
Debug: * item: 50
Debug: * item: 51
Debug: * item: 52
Debug: * item: 53
Debug: * item: 54
Debug: * item: 55
Debug: * item: 56
Debug: * item: 58
Debug: * item: 59
Debug: * item: 61
Debug: * item: 62
Debug: * item: 63
Debug: * item: 65
Debug: * item: 66
Debug: * item: 67
Debug: * item: 68
Debug: * item: 69
Debug: * selected item: 2 (3)
Debug: Playlist::playItem: 3 (count:70)
Debug: playlist_path: ''
Debug: Core::open: '/home/josealb77/Música/Adelén - Olé (1080p).mp4'
Debug: Core::open: * identified as local file
Debug: Core::openFile: '/home/josealb77/Música/Adelén - Olé (1080p).mp4'
Debug: Core::playNewFile: '/home/josealb77/Música/Adelén - Olé (1080p).mp4'
Debug: Core::saveMediaInfo
Debug: Core::saveMediaInfo: not saving settings, disabled by user
Debug: FileSettingsHash::existSettingsFor: '/home/josealb77/Música/Adelén - Olé (1080p).mp4'
Debug: FileSettingsHash::existSettingsFor: config_file: '/home/josealb77/.config/smplayer/file_settings/e/e7268b508520a341.ini'
Debug: Core::playNewFile: volume: 40, old_volume: 40
Debug: Core::initPlaying
Debug: Core::startMplayer
Debug: Core::startMplayer: checking if stream is a playlist
Debug: Core::startMplayer: url path: '/home/josealb77/Música/Adelén - Olé (1080p).mp4'
Debug: Core::startMplayer: url_is_playlist: 0
Debug: MplayerVersion::isMplayerAtLeast: comparing 27667 with 37224
Debug: MplayerVersion::isMplayerAtLeast: comparing 29058 with 37224
Debug: Core::startMplayer: * not using -colorkey for vdpau
Debug: Core::startMplayer: * report if you can't see the video
Debug: MplayerVersion::isMplayerAtLeast: comparing 27872 with 37224
Debug: Core::startMplayer: using vdpau, video filters are ignored
Debug: MplayerVersion::isMplayerAtLeast: comparing 24924 with 37224
Debug: Core::startMplayer: edl file: ''
Debug: MplayerLayer::playingStarted
Debug: Screen::playingStarted
Debug: Screen::setAutoHideCursor: 1
Debug: Screen::playingStarted
Debug: Screen::setAutoHideCursor: 1
Debug: Core::startMplayer: command: 'mplayer -noquiet -nofs -nomouseinput -vc ffh264vdpau,ffmpeg12vdpau,ffwmv3vdpau,ffvc1vdpau,ffodivxvdpau, -lavdopts threads=4 -sub-fuzziness 1 -identify -slave -vo vdpau -ao pulse -nokeepaspect -nodr -double -input nodefault-bindings:conf=/dev/null -wid 67109202 -monitorpixelaspect 1 -ass -embeddedfonts -ass-line-spacing 0 -ass-font-scale 1 -noflip-hebrew -ass-styles /home/josealb77/.config/smplayer/styles.ass -subfont-autoscale 0 -subfont-osd-scale 20 -subfont-text-scale 20 -subcp UTF-8 -subpos 100 -volume 100 -cache 2048 -osdlevel 0 -noslices -channels 2 -af scaletempo,equalizer=0:0:0:0:0:0:0:0:0:0 -softvol -softvol-max 110 /home/josealb77/Música/Adelén - Olé (1080p).mp4'
Debug: MplayerProcess::parseLine: 'MPlayer SVN-r37224 (C) 2000-2014 MPlayer Team'
Debug: MplayerVersion::mplayerVersion: MPlayer SVN revision found: 37224
Debug: MplayerProcess::parseLine: MPlayer SVN: 37224
Debug: MplayerProcess::parseLine: '210 audio & 441 video codecs'
Debug: MplayerProcess::parseLine: 'mplayer: could not connect to socket'
Debug: MplayerProcess::parseLine: 'mplayer: No such file or directory'
Debug: MplayerProcess::parseLine: 'Failed to open LIRC support. You will not be able to use your remote control.'
Debug: MplayerProcess::parseLine: ''
Debug: MplayerProcess::parseLine: 'Playing /home/josealb77/Música/Adelén - Olé (1080p).mp4.'
Debug: MplayerProcess::parseLine: ''
Debug: MplayerProcess::parseLine: 'Cache fill: 0.00% (0 bytes) '
Debug: Core::displayMessage
Debug: MplayerProcess::parseLine: ''
Debug: MplayerProcess::parseLine: 'libavformat version 55.33.100 (internal)'
Debug: MplayerProcess::parseLine: 'libavformat file format detected.'
Debug: MplayerProcess::parseLine: 'ID_VIDEO_ID=0'
Debug: MplayerProcess::parseLine: ID_VIDEO_ID: 0
Debug: MplayerProcess::parseLine: '[lavf] stream 0: video (h264), -vid 0'
Debug: MplayerProcess::parseLine: 'ID_AUDIO_ID=0'
Debug: MplayerProcess::parseLine: ID_AUDIO_ID: 0
Debug: MplayerProcess::parseLine: '[lavf] stream 1: audio (aac), -aid 0, -alang und'
Debug: MplayerProcess::parseLine: 'VIDEO: [H264] 1920x1080 24bpp 25.000 fps 3859.0 kbps (471.1 kbyte/s)'
Debug: MplayerProcess::parseLine: 'Clip info:'
Debug: MplayerProcess::parseLine: ' major_brand: isom'
Debug: MplayerProcess::parseLine: 'ID_CLIP_INFO_NAME0=major_brand'
Debug: MplayerProcess::parseLine: 'ID_CLIP_INFO_VALUE0=isom'
Debug: MplayerProcess::parseLine: ' minor_version: 512'
Debug: MplayerProcess::parseLine: 'ID_CLIP_INFO_NAME1=minor_version'
Debug: MplayerProcess::parseLine: 'ID_CLIP_INFO_VALUE1=512'
Debug: MplayerProcess::parseLine: ' compatible_brands: isomiso2avc1mp41'
Debug: MplayerProcess::parseLine: 'ID_CLIP_INFO_NAME2=compatible_brands'
Debug: MplayerProcess::parseLine: 'ID_CLIP_INFO_VALUE2=isomiso2avc1mp41'
Debug: MplayerProcess::parseLine: ' encoder: Lavf55.19.100'
Debug: MplayerProcess::parseLine: 'ID_CLIP_INFO_NAME3=encoder'
Debug: MplayerProcess::parseLine: 'ID_CLIP_INFO_VALUE3=Lavf55.19.100'
Debug: MplayerProcess::parseLine: 'ID_CLIP_INFO_N=4'
Debug: MplayerProcess::parseLine: 'Load subtitles in /home/josealb77/Música/'
Debug: MplayerProcess::parseLine: 'ID_FILENAME=/home/josealb77/Música/Adelén - Olé (1080p).mp4'
Debug: MplayerProcess::parseLine: 'ID_DEMUXER=lavfpref'
Debug: MplayerProcess::parseLine: 'ID_VIDEO_FORMAT=H264'
Debug: MplayerProcess::parseLine: 'ID_VIDEO_BITRATE=3858952'
Debug: MplayerProcess::parseLine: 'ID_VIDEO_WIDTH=1920'
Debug: MplayerProcess::parseLine: md.video_width set to 1920
Debug: MplayerProcess::parseLine: 'ID_VIDEO_HEIGHT=1080'
Debug: MplayerProcess::parseLine: md.video_height set to 1080
Debug: MplayerProcess::parseLine: 'ID_VIDEO_FPS=25.000'
Debug: MplayerProcess::parseLine: 'ID_VIDEO_ASPECT=0.0000'
Debug: MplayerProcess::parseLine: md.video_aspect set to 1.777778
Debug: MplayerProcess::parseLine: 'ID_AUDIO_FORMAT=MP4A'
Debug: MplayerProcess::parseLine: 'ID_AUDIO_BITRATE=125592'
Debug: MplayerProcess::parseLine: 'ID_AUDIO_RATE=44100'
Debug: MplayerProcess::parseLine: 'ID_AUDIO_NCH=2'
Debug: MplayerProcess::parseLine: 'ID_START_TIME=0.00'
Debug: MplayerProcess::parseLine: 'ID_LENGTH=198.56'
Debug: MplayerProcess::parseLine: md.duration set to 198.560000
Debug: MplayerProcess::parseLine: 'ID_SEEKABLE=1'
Debug: MplayerProcess::parseLine: 'ID_CHAPTERS=0'
Debug: MplayerProcess::parseLine: 'Opening video filter: [ass auto=1]'
Debug: MplayerProcess::parseLine: 'Couldn't open video filter 'ass'.'
Debug: MplayerProcess::parseLine: 'ASS: cannot add video filter'
Debug: MplayerProcess::parseLine: '=========================================================================='
Debug: MplayerProcess::parseLine: 'Forced video codec: ffh264vdpau'
Debug: MplayerProcess::parseLine: 'Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family'
Debug: MplayerProcess::parseLine: 'libavcodec version 55.52.102 (internal)'
Debug: MplayerProcess::parseLine: 'Selected video codec: [ffh264vdpau] vfm: ffmpeg (FFmpeg H.264 (VDPAU))'
Debug: MplayerProcess::parseLine: '=========================================================================='
Debug: MplayerProcess::parseLine: 'ID_VIDEO_CODEC=ffh264vdpau'
Debug: MplayerProcess::parseLine: '=========================================================================='
Debug: MplayerProcess::parseLine: 'Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders'
Debug: MplayerProcess::parseLine: 'AUDIO: 44100 Hz, 2 ch, floatle, 125.6 kbit/4.45% (ratio: 15699->352800)'
Debug: MplayerProcess::parseLine: 'ID_AUDIO_BITRATE=125592'
Debug: MplayerProcess::parseLine: 'ID_AUDIO_RATE=44100'
Debug: MplayerProcess::parseLine: 'ID_AUDIO_NCH=2'
Debug: MplayerProcess::parseLine: 'Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio))'
Debug: MplayerProcess::parseLine: '=========================================================================='
Debug: MplayerProcess::parseLine: 'AO: [pulse] 44100Hz 2ch floatle (4 bytes per sample)'
Debug: Core::gotAO: 'pulse'
Debug: MplayerProcess::parseLine: 'ID_AUDIO_CODEC=ffaac'
Debug: MplayerProcess::parseLine: '[Mixer] No hardware mixing, inserting volume filter.'
Debug: MplayerProcess::parseLine: 'Starting playback...'
Debug: MplayerProcess::parseLine: 'Movie-Aspect is 1.78:1 - prescaling to correct movie aspect.'
Debug: MplayerProcess::parseLine: md.video_aspect set to 1.780000
Debug: MplayerProcess::parseLine: 'ID_VIDEO_ASPECT=1.7778'
Debug: MplayerProcess::parseLine: md.video_aspect set to 1.777800
Debug: MplayerProcess::parseLine: 'VO: [vdpau] 1920x1080 => 1920x1080 H.264 VDPAU acceleration '
Debug: Core::gotVO: 'vdpau'
Debug: Core::gotWindowResolution: 1920, 1080
Debug: BaseGui::resizeWindow: 1920, 1080
Debug: BaseGui::resizeWindow: size to scale: 3840, 2160
Debug: BaseGui::resizeWindow: done: window size: 3840, 2283
Debug: BaseGui::resizeWindow: done: panel->size: 3840, 2160
Debug: BaseGui::resizeWindow: done: mplayerwindow->size: 3840, 2160
Warning: QWidget::paintEngine: Should no longer be called
Warning: QWidget::paintEngine: Should no longer be called
Warning: QXcbShmImage: shmget() failed (22) for size 35066880 (3840x2283)
Violación de segmento
[josealb77@ArchLinux src]$
Violación de segmento = Segmentation fault in spanish
I haven't been able to compile the latest version of MPlayer in order to discard MPlayer (I got this compiling error: make: *** [libvo/vo_gif89a.o] Error 1)
And searching the internet there are references to Qt, so I think its a Qt bug instead a smplayer or mplayer or nvidia bug, but I don't know anything about Qt and I don't know/understand what to do with this information. I've got installed qt4 and qt5-base and more qt packages but I don't know which can be relevant
I've also tried to change the output video driver from vdpau (I've got an nvidia card) to xv but the bug still happens.
With vlc I have no problems watching the same playlists.
What can I do?

markp1989 wrote:
hey, im having the same problem, was fine till a system update, now somthings gone wrong
http://bbs.archlinux.org/viewtopic.php?id=99085
edit: i found a fix, if you start nscd by running:
/etc/rc.d/nscd start
before you fold it works
This fixed the same issue too!

Similar Messages

ISE Restore fails after 80% (Segmentation fault)

Hi All
After a system crash I'm trying to restore. I first did a application reset-config ise and then a restore over an ftp repository.
After 80% it fails with at DB Syncup with a segmentation fault. Tried this with different Backup versions all having the latest patch level.
Any Ideas ?
Thanks
Initiating restore. Please wait...
% restore in progress: Starting Restore...10% completed
% restore in progress: Retrieving backup file from Repository...20% completed
% restore in progress: Decrypting backup data...25% completed
% restore in progress: Extracting backup data...30% completed
Leaving the currently connected AD domain
Please rejoin the AD domain from the administrative GUI
% restore in progress: Stopping ISE processes required for restore...35% completed
% restore in progress: Restoring ISE configuration database...40% completed
% restore in progress: Updating Database metadata...70% completed
% restore in progress: Restoring logs...75% completed
% restore in progress: Performing ISE Database synchup...80% completed
/opt/CSCOcpm/bin/isecfgrestore.sh: line 1248: 11162 Segmentation fault (core dumped) curl -q -k --tlsv1 --connect-timeout 10 https://$MYIP/admin/index.jsp > /dev/null 2>&1
/opt/CSCOcpm/bin/isecfgrestore.sh: line 1248: 11177 Segmentation fault (core dumped) curl -q -k --tlsv1 --connect-timeout 10 https://$MYIP/admin/index.jsp > /dev/null 2>&1
/opt/CSCOcpm/bin/isecfgrestore.sh: line 1248: 11187 Segmentation fault (core dumped) curl -q -k --tlsv1 --connect-timeout 10 https://$MYIP/admin/index.jsp > /dev/null 2>&1
......and so on
Cisco Application Deployment Engine OS Release: 2.2
ADE-OS Build Version: 2.2.0.162
ADE-OS System Architecture: x86_64
Copyright (c) 2005-2014 by Cisco Systems, Inc.
All rights reserved.
Version information of installed applications
Cisco Identity Services Engine
Version : 1.3.0.876
Build Date : Tue Oct 28 04:02:29 2014
Install Date : Fri Dec 5 08:31:15 2014
Cisco Identity Services Engine Patch
Version : 1
Install Date : Mon Jan 26 10:21:50 2015

After sending the appropriate logs to the TAC I learned that even though the restore looked to have failed, at 80% the actual restore has been completed and what was failing was the node synchronization. With this knowledge I was able to access the admin GUI and manually sync up the other nodes and have been running without issue.
As it turns out this is documented issue, CSCur36983, and will be fixed in release 1.4.
Here is the reply I received from the TAC:
"Based on the logs sent, we're definitely hitting CSCur36983 which will be
fixed in ISE 1.4:
https://tools.cisco.com/bugsearch/bug/CSCur36983/
According to the bug details, when we reach 80% the restoration part itself
has already completed. What is failing is a sync with the rest of the nodes
in the deployment. Therefore, you can reload the ISE at this point and you
should have access to the admin GUI again. From there, you can force a sync up with the other nodes."

Amarok2 compilation fails on 4%, segmentation fault

Hi!
I am trying to compile amarok2 using PKGBUILD from AUR. It results in error:
Linking CXX executable generator
/bin/sh: line 1: 13531 Segmentation fault /home/gpan/Desktop/amarok/src/amarok-2.0/src/scriptengine/generator/generator/generator --output-directory=/home/gpan/Desktop/amarok/src/amarok-2.0/src/scriptengine/generator/generator --include-paths=/usr/include
make[2]: *** [src/scriptengine/generator/generator/generator] Error 139
make[1]: *** [src/scriptengine/generator/generator/CMakeFiles/generator.dir/all] Error 2
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
What might be wrong?

Yes, it works! Ive successfully compiled amarok 2.0.1.1. Thank you pressh.
Nevertheless its still strange. I have tried it twice as root yesterday and had no luck. Maybe it was something in the qt or cmake packages which I updated today before building again.

Root.sh failure during Grid install - segmentation fault for clscfg

Hi anyone got any idea how to resolve the following error during execution of root.sh on second node of a RAC installation. I see there is a failure when clscfg -localadd is run - perhaps this is the start of the issue. I have no idea what this command is doing
Any help appreciated
Installing verison 11.2.0.2 on RHEL 5
ntpd was NOT running - I ignored this during the pre-reqs at the end of the runInstaller - perhaps this is the issue and i need to start fresh and make sure its running before running root.sh ?
root.sh....
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /opt/app/11.2.0/grid/crs/install/crsconfig_params
Failure with signal 11 from command: 1 /opt/app/11.2.0/grid/bin/clscfg -localadd
OLR initialization - successful
Adding daemon to inittab
ACFS-9200: Supported
ACFS-9300: ADVM/ACFS distribution files found.
ACFS-9307: Installing requested ADVM/ACFS software.
ACFS-9308: Loading installed ADVM/ACFS drivers.
ACFS-9321: Creating udev for ADVM/ACFS.
ACFS-9323: Creating module dependencies - this may take some time.
ACFS-9327: Verifying ADVM/ACFS devices.
ACFS-9309: ADVM/ACFS installation correctness verified.
CRS-2672: Attempting to start 'ora.mdnsd' on 'coden-ota-odc'
CRS-2676: Start of 'ora.mdnsd' on 'coden-ota-odc' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'coden-ota-odc'
CRS-2676: Start of 'ora.gpnpd' on 'coden-ota-odc' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'coden-ota-odc'
CRS-2672: Attempting to start 'ora.gipcd' on 'coden-ota-odc'
CRS-2676: Start of 'ora.cssdmonitor' on 'coden-ota-odc' succeeded
CRS-2676: Start of 'ora.gipcd' on 'coden-ota-odc' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'coden-ota-odc'
CRS-2672: Attempting to start 'ora.diskmon' on 'coden-ota-odc'
CRS-2676: Start of 'ora.diskmon' on 'coden-ota-odc' succeeded
CRS-2676: Start of 'ora.cssd' on 'coden-ota-odc' succeeded
Start of resource "ora.ctssd" failed
CRS-2672: Attempting to start 'ora.ctssd' on 'coden-ota-odc'
CRS-2674: Start of 'ora.ctssd' on 'coden-ota-odc' failed
CRS-4000: Command Start failed, or completed with errors.
Cluster Time Synchronisation Service start in exclusive mode failed at /opt/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 6455.
/opt/app/11.2.0/grid/perl/bin/perl -I/opt/app/11.2.0/grid/perl/lib -I/opt/app/11.2.0/grid/crs/install /opt/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
I executed the /opt/app/11.2.0/grid/bin/clscfg to see what the result was and it returns a Segmentation Fault to std err
Edited by: 787789 on Nov 10, 2010 6:58 AM

Hi,
here is one document you can go for work around but it is on windows platform but similar error as you posted *CRS Installation Failed with "failed to configure Oracle Cluster Registry with CLSCFG, ret 9" [ID 851742.1]*
Thanks

Midori segmentation fault

When browsing with midori, it sometimes crashes. It seems to be random, a page might chras it someday, but not the otherday. When run in terminall with -g it gives this:
Launching command: '/usr/bin/gdb' --batch -ex 'set print thread-events off' -ex run -ex bt -ex 'set logging on /tmp/midori-gdb.bt' --return-child-result --args midori
warning: Could not load shared library symbols for linux-gate.so.1.
Do you need "set solib-search-path" or "set sysroot"?
Traceback (most recent call last):
File "/usr/share/gdb/auto-load/usr/lib/libgobject-2.0.so.0.3400.3-gdb.py", line 9, in <module>
from gobject import register
File "/usr/share/glib-2.0/gdb/gobject.py", line 3, in <module>
import gdb.backtrace
ImportError: No module named backtrace
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
(midori4:5202): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2:19: Theming engine 'adwaita' not found
a bunch of similar Gtk warnings...
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Program received signal SIGSEGV, Segmentation fault.
0xb598565c in JSC::WeakBlock::visit(JSC::HeapRootVisitor&) () from /usr/lib/libjavascriptcoregtk-3.0.so.0
#0 0xb598565c in JSC::WeakBlock::visit(JSC::HeapRootVisitor&) () from /usr/lib/libjavascriptcoregtk-3.0.so.0
#1 0xb5983774 in JSC::MarkedSpace::visitWeakSets(JSC::HeapRootVisitor&) () from /usr/lib/libjavascriptcoregtk-3.0.so.0
#2 0xb597c340 in JSC::Heap::markRoots(bool) () from /usr/lib/libjavascriptcoregtk-3.0.so.0
#3 0xb597cec7 in JSC::Heap::collect(JSC::Heap::SweepToggle) () from /usr/lib/libjavascriptcoregtk-3.0.so.0
#4 0xb597d08c in JSC::Heap::collectAllGarbage() () from /usr/lib/libjavascriptcoregtk-3.0.so.0
#5 0xb5eaf77b in ?? () from /usr/lib/libwebkitgtk-3.0.so.0
#6 0xb5eafa45 in ?? () from /usr/lib/libwebkitgtk-3.0.so.0
#7 0xb6bb5602 in ?? () from /usr/lib/libwebkitgtk-3.0.so.0
#8 0xb6bb5675 in ?? () from /usr/lib/libwebkitgtk-3.0.so.0
#9 0xb6c4436b in ?? () from /usr/lib/libwebkitgtk-3.0.so.0
#10 0xb7ebd46f in ?? () from /usr/lib/libglib-2.0.so.0
#11 0xb7ebc793 in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0
#12 0xb7ebcb30 in ?? () from /usr/lib/libglib-2.0.so.0
#13 0xb7ebcf8b in g_main_loop_run () from /usr/lib/libglib-2.0.so.0
#14 0xb7ad32f5 in gtk_main () from /usr/lib/libgtk-3.so.0
#15 0x08067e45 in main ()
*** NSPlugin Viewer *** ERROR: rpc_end_sync called when not in sync!
Launching command: '/usr/bin/gdb' --batch -ex 'set print thread-events off' -ex run -ex bt -ex 'set logging on /tmp/midori-gdb.bt' --return-child-result --args midori d
warning: Could not load shared library symbols for linux-gate.so.1.
Do you need "set solib-search-path" or "set sysroot"?
Traceback (most recent call last):
File "/usr/share/gdb/auto-load/usr/lib/libgobject-2.0.so.0.3400.3-gdb.py", line 9, in <module>
from gobject import register
File "/usr/share/glib-2.0/gdb/gobject.py", line 3, in <module>
import gdb.backtrace
ImportError: No module named backtrace
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
(midori4:5560): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2:19: Theming engine 'adwaita' not found
a bunch of similar Gtk warnings...
** (midori4:5560): CRITICAL **: midori_browser_add_uri: assertion `uri != NULL' failed
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Program received signal SIGSEGV, Segmentation fault.
0x00000000 in ?? ()
#0 0x00000000 in ?? ()
#1 0xbffff438 in ?? ()
#2 0x00000001 in ?? ()
*** NSPlugin Viewer *** ERROR: rpc_end_sync called when not in sync!
[matyilona@localhost ~]$ midori -gd
Launching command: '/usr/bin/gdb' --batch -ex 'set print thread-events off' -ex run -ex bt -ex 'set logging on /tmp/midori-gdb.bt' --return-child-result --args midori d
warning: Could not load shared library symbols for linux-gate.so.1.
Do you need "set solib-search-path" or "set sysroot"?
Traceback (most recent call last):
File "/usr/share/gdb/auto-load/usr/lib/libgobject-2.0.so.0.3400.3-gdb.py", line 9, in <module>
from gobject import register
File "/usr/share/glib-2.0/gdb/gobject.py", line 3, in <module>
import gdb.backtrace
ImportError: No module named backtrace
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
(midori4:7964): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2:19: Theming engine 'adwaita' not found
a bunch of similar Gtk warnings...
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory
Program received signal SIGSEGV, Segmentation fault.
0xb602a803 in ?? () from /usr/lib/libwebkitgtk-3.0.so.0
#0 0xb602a803 in ?? () from /usr/lib/libwebkitgtk-3.0.so.0
#1 0xb602ad56 in ?? () from /usr/lib/libwebkitgtk-3.0.so.0
#2 0xb602d4de in ?? () from /usr/lib/libwebkitgtk-3.0.so.0
#3 0xb602e675 in ?? () from /usr/lib/libwebkitgtk-3.0.so.0
#4 0xa0bdbc80 in ?? ()
Backtrace stopped: previous frame inner to this frame (corrupt stack?)
I dont know witch pages I was looking at when midori chrashed.
I found this, but I'm not sure if I have the same problem. Are this three are all the same problem, and if so, is it something with flash?

Are you using KDE? Did you just did an upgrade of KDE?
I had a similar problem and it seems to be related to ~/.kde4 where it seems settings do not get updated. I even have a thread about the Pager Settings not updating.
Anyway ... if this is your case deleting ~/.kde4 and logging out and in again solved the problem for me, for both: Chromium and Firefox. Of course you loose your personal settings but it's faster to re-set your settings than it is to find what file is failing to update in ~/.kde4
Hope this helps.
R

SQL Server Driver for Linux causes Segmentation Fault

Hello,
I'm using the SQL Server Driver 11.0.1790 on Linux with mod_perl and Apache. While running fine with all my CLI Perl apps I occasionally get Segmentation Faults when using it from within mod_perl applications. Sometimes every other connect to the database
segfaults. I've created a core dump and did a stack backtrace:
Loaded symbols for /usr/lib/../lib64/libxml2.so.2
Core was generated by `/usr/sbin/httpd2 -X'.
Program terminated with signal 11, Segmentation fault.
#0 0x0000000000000000 in ?? ()
(gdb) bt
#0 0x0000000000000000 in ?? ()
#1 0x00007f8a8aeda803 in __connect_part_two (connection=0x7f8a99c885e0) at SQLConnect.c:1891
#2 0x00007f8a8aedffd6 in SQLDriverConnect (hdbc=0x7f8a99c885e0, hwnd=0x0, conn_str_in=0x7fff1e7369ee "",
len_conn_str_in=<value optimized="" out="">,
conn_str_out=0x7fff1e736a80 "DSN=XXXXX;UID=XXX;PWD=XXXXXXXX;WSID=XXXXXXXX;DATABASE=XXXXX;MARS_Connection=Yes;",
conn_str_out_max=512, ptr_conn_str_out=0x7fff1e736a7e, driver_completion=0) at SQLDriverConnect.c:1530
#3 0x00007f8a8b1458ee in odbc_db_login6 (dbh=0x7f8a99938ca0, imp_dbh=0x7f8a99c8acd0,
dbname=0x7fff1e736c80 "DSN=XXXXX;MARS_Connection=Yes;UID=XXX;PWD=XXXXXXXX", uid=0x7f8a9996e8b0 "XXX",
pwd=0x7f8a9996e8d0 "XXXXXXXX", attr=0x7f8a99938c40) at dbdimp.c:942
#4 0x00007f8a8b141822 in XS_DBD__ODBC__db__login (my_perl=<value optimized="" out="">, cv=<value optimized="" out="">) at ./ODBC.xsi:98
#5 0x00007f8a9125b091 in Perl_pp_entersub (my_perl=0x7f8a96274f50) at pp_hot.c:3046
#6 0x00007f8a912595f6 in Perl_runops_standard (my_perl=0x7f8a96274f50) at run.c:41
#7 0x00007f8a911eb755 in Perl_call_sv (my_perl=0x7f8a96274f50, sv=0x7f8a99938bc8, flags=2) at perl.c:2632
#8 0x00007f8a8b791d02 in XS_DBI_dispatch (my_perl=0x7f8a96274f50, cv=0x7f8a98cbbe60) at DBI.xs:3473
#9 0x00007f8a9125b091 in Perl_pp_entersub (my_perl=0x7f8a96274f50) at pp_hot.c:3046
#10 0x00007f8a912595f6 in Perl_runops_standard (my_perl=0x7f8a96274f50) at run.c:41
#11 0x00007f8a911ebab0 in Perl_call_sv (my_perl=0x7f8a96274f50, sv=0x7f8a97db4f68, flags=10) at perl.c:2647
#12 0x00007f8a9154ba31 in modperl_callback (my_perl=0x7f8a96274f50, handler=0x7f8a96230c90, p=0x7f8a96334838, r=0x7f8a963348b0,
s=0x7f8a962303b0, args=0x7f8a998376a8) at modperl_callback.c:101
#13 0x00007f8a9154c79c in modperl_callback_run_handlers (idx=6, type=4, r=0x7f8a963348b0, c=<value optimized="" out="">, s=0x7f8a962303b0,
pconf=<value optimized="" out="">, plog=0x0, ptemp=0x0, run_mode=MP_HOOK_RUN_FIRST) at modperl_callback.c:262
#14 0x00007f8a9154cb6f in modperl_callback_per_dir (idx=-1714610816, r=<value optimized="" out="">, run_mode=<value optimized="" out="">)
at modperl_callback.c:369
#15 0x00007f8a91546b93 in modperl_response_handler_run (r=0x7f8a963348b0) at mod_perl.c:1000
#16 modperl_response_handler (r=0x7f8a963348b0) at mod_perl.c:1039
#17 0x00007f8a95f01e08 in ap_run_handler ()
#18 0x00007f8a95f0226c in ap_invoke_handler ()
#19 0x00007f8a95f0ff00 in ap_process_request ()
#20 0x00007f8a95f0ce98 in ?? ()
#21 0x00007f8a95f08b28 in ap_run_process_connection ()
#22 0x00007f8a95f14e5a in ?? ()
#23 0x00007f8a95f15126 in ?? ()
#24 0x00007f8a95f15903 in ap_mpm_run ()
#25 0x00007f8a95eec9be in main ()
</value></value></value></value></value></value></value>
Calling something at NULL obviously doesn't look right…
Can onebody help fixing this issue?
Best regards,
Stephan

Hi Stephan,
This is a bug in the unixODBC Driver Manager 2.3.0. Essentially, you can only have one HDBC per HENV. The mod_perl must be creating the connections upon the same HENV.
The bug appears to be fixed in version 2.3.1 but we have not yet certified that out driver can work with 2.3.1. See the 2.3.1 release notes at
http://www.unixodbc.org/ where the last item says:
"Driver version was not being held when a second connection was made to the driver"
The Driver Manager would "forget" that we are an ODBC V3 driver and try intereacting with us as an ODBC V2 driver for the second connection (which fails).
The workaround is to create a new HENV for each connection but I'm not sure if this is possible in mod_perl.

GNU compiled app crashes with signal 11: Segmentation Fault

Hi Community,
I know this is not a GNU oriented forum, but maybe this is a common issue.
We have a C++ multi-threaded application running properly in Solaris 9 Sparc. Due to some issues mostly related to the NICs we needed to have the application running in Solaris 10 x86. The problem is that the compilation is ok (always with GNU) but during run time, we have the application crashing in different instructions because of a signal 11.
It always crashes in a malloc call within the libstdc++.so.6
It was compiled with the option -mt and -lthread. Is this a known problem? Do you recommend any direction to start seeking for a solution?
Pls, find attached the gdb outcomes after the crash.
Thanks in advance, Pablo
quiterio{root}# gdb cord /usr/nguser/core
GNU gdb 6.6
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i386-pc-solaris2.10"...
Reading symbols from /lib/libsocket.so.1...done.
Loaded symbols for /lib/libsocket.so.1
Reading symbols from /export/home/mysql/mysql-5.0.51/lib/mysql/libmysqlclient.so.15...done.
Loaded symbols for /opt/mysql/mysql/lib/mysql/libmysqlclient.so.15
Reading symbols from /lib/libnsl.so.1...done.
Loaded symbols for /lib/libnsl.so.1
Reading symbols from /lib/librt.so.1...done.
Loaded symbols for /lib/librt.so.1
Reading symbols from /lib/libthread.so.1...
warning: Lowest section in /lib/libthread.so.1 is .dynamic at 00000074
done.
Loaded symbols for /lib/libthread.so.1
Reading symbols from /usr/local/lib/libmysqlpp.so.2...done.
Loaded symbols for /usr/local/lib/libmysqlpp.so.2
Reading symbols from /usr/lib/libz.so.1...done.
Loaded symbols for /usr/lib/libz.so.1
Reading symbols from /usr/local/lib/libstdc++.so.6...done.
Loaded symbols for /usr/local/lib/libstdc++.so.6
Reading symbols from /lib/libm.so.2...done.
Loaded symbols for /lib/libm.so.2
Reading symbols from /usr/local/lib/libgcc_s.so.1...done.
Loaded symbols for /usr/local/lib/libgcc_s.so.1
Reading symbols from /lib/libc.so.1...done.
Loaded symbols for /lib/libc.so.1
Reading symbols from /lib/libresolv.so.2...done.
Loaded symbols for /lib/libresolv.so.2
Reading symbols from /lib/libaio.so.1...done.
Loaded symbols for /lib/libaio.so.1
Reading symbols from /lib/libmd.so.1...done.
Loaded symbols for /lib/libmd.so.1
Reading symbols from /export/home/mysql/mysql-5.0.51/lib/mysql/libmysqlclient_r.so.15...done.
Loaded symbols for /opt/mysql/mysql/lib/mysql/libmysqlclient_r.so.15
Reading symbols from /lib/libpthread.so.1...
warning: Lowest section in /lib/libpthread.so.1 is .dynamic at 00000074
done.
Loaded symbols for /lib/libpthread.so.1
Reading symbols from /lib/ld.so.1...done.
Loaded symbols for /lib/ld.so.1
Core was generated by `/export/home/egasco/cord/cord'.
Program terminated with signal 11, Segmentation fault.
#0 0xfebd4ad2 in t_splay () from /lib/libc.so.1
(gdb) bt
#0 0xfebd4ad2 in t_splay () from /lib/libc.so.1
#1 0xfebd49b0 in t_delete () from /lib/libc.so.1
#2 0xfebd46ea in realfree () from /lib/libc.so.1
#3 0xfebd42ee in _malloc_unlocked () from /lib/libc.so.1
#4 0xfebd4138 in malloc () from /lib/libc.so.1
#5 0x080bdf64 in PMData::addData (this=0x818ae70, header=
{_M_t = {_M_impl = {<std::allocator<std::_Rb_tree_node<std::pair<const std::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::basic_string<char, std::char_traits<char>, std::allocator<char> > > > >> = {<__gnu_cxx::new_allocator<std::_Rb_tree_node<std::pair<const std::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::basic_string<char, std::char_traits<char>, std::allocator<char> > > > >> = {<No data fields>}, <No data fields>}, _M_key_compare = {<std::binary_function<std::basic_string<char, std::char_traits<char>, std::allocator<char> >,std::basic_string<char, std::char_traits<char>, std::allocator<char> >,bool>> = {<No data fields>}, <No data fields>}, _M_header = {_M_color = std::_S_red, _M_parent = 0x81ade48, _M_left = 0x81c2310, _M_right = 0x81ae900}, _M_node_count = 8}}},
data=0x81c1a20 "v=0\r\no=50 2890844526 2890842807 IN IP4 192.168.1.245\r\ns=SDP seminar\r\nc=IN IP4 192.168.1.245\r\nt= 0 0\r\nm=audio 9092 RTP/AVP 8 18\r\n", dest=ONEP_SIP) at PMData.cpp:23
#6 0x080b3a52 in UserCall::process_initialization (this=0x81c2630, packet=0x81ad128) at UserCall.cpp:505
#7 0x080b056f in UserCall::process (this=0x81c2630, packet=0x81ad128) at UserCall.cpp:132
#8 0x080791d7 in ONEPPacketManager::processPacket () at ActionNotAllowException.h:15
#9 0x080aa159 in onep_processing_thread (arg=0x8127e88) at CordApplication.cpp:1317
#10 0xfec34672 in _thr_setup () from /lib/libc.so.1
#11 0xfec34960 in L3_doit () from /lib/libc.so.1
#12 0xfe7e2400 in ?? ()
#13 0x00000000 in ?? ()

A crash in malloc in multi-threaded code could be a bug in the system malloc or a failure to use a thread-safe malloc. The default Solaris malloc in /usr/lib/libc.so.* is thread-safe.
A crash in malloc can also be caused by a heap corruption. Probably the most common causes of heap corruption are
- writing beyond the bounds of a buffer or variable (off by one, for example)
- deleting the same object more than once
- using an invalid pointer:
--- uninitialized
--- pointing to a deleted object
--- pointing to an out-of-scope object
- failure to guard a critical region
- failing to declare shared objects as volatile

Adobe Reader 9.3 for Linux: Segmentation Fault in PPKLite.api

Adobe Reader 9.3 cannot open signed pdf files on our system (64-bit Fedora 10 Linux, with 32-bit compatibility libraries installed). It crashes with a segmentation fault any time one tries to open the following file:
http://www.utoronto.ca/ic/software/forms/matlab_concurrent_renewal2010.pdf
Running with ACRODEBUG=1 and ACRO_CRASHLOG=1 results in a zero-length crash log file and the only debug messages shown are
Loading PlugIn /opt/Adobe/Reader9/Reader/intellinux/plug_ins/Annots.api ... [dlopen success for Annots.api, handle = 0xc4548f8]
Loading PlugIn /opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api ... [dlopen success for AcroForm.api, handle = 0xd0c3a50]
Loading PlugIn /opt/Adobe/Reader9/Reader/intellinux/plug_ins/DigSig.api ... [dlopen success for DigSig.api, handle = 0xd0dcc68]
Loading PlugIn /opt/Adobe/Reader9/Reader/intellinux/plug_ins/EScript.api ... [dlopen success for EScript.api, handle = 0xd126ac8]
Loading PlugIn /opt/Adobe/Reader9/Reader/intellinux/plug_ins/PPKLite.api ... [dlopen success for PPKLite.api, handle = 0xd7b1ff0]
If I run the gdb debugger on /opt/Adobe/Reader9/Reader/intellinux/bin/acroread, it shows the segmentation fault occurring inside /opt/Adobe/Reader9/Reader/intellinux/plug_ins/PPKLite.api (but since the file is stripped, all it shows is the binary offset of the segfault). I do have a coredump, though.
If I remove the PPKLite.api file (or rename it to PPKLite.api.hide -- note that chmod -x does not work, nor does renaming it to something else that still ends in .api, unlike some workarounds I've seen on the web for similar problems in earlier versions of Adobe Reader), then Adobe Reader can open the file without crashing, except that without PPKLite it cannot validate its signature and so it displays the message "This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available. Please contact the author for the original version of this document" -- which I assume is because the signature validation failed due to the absence of PPKLite so it things the document has been altered even though it hasn't been.
So this removing or renaming of PPKLite.api works around the problem of the crash, at the expense of getting this misleading warning message.
However, obviously there is a problem inside PPKLite.api that needs to be fixed....

I'm seeing what must be the same issue: acroread foo.pdf exits almost instantly without any message, but with status 1.
This is: AdobeReader_enu-9.3.1-1.i486 on a Fedora 12 box, AMD Phenom II 945.
If I set ACRODEBUG=1 and ACRO_CRASHLOG=1 and ulimit -c unlimited, and rename PPKLite.api, *then* I get a nonzero crashlog. Which is:
/usr/bin/acroread [0x84ff125] [@0x8048000]
(__kernel_sigreturn+0x0) [0xf7786400] [@0xf7786000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf44dc99b] [@0xf3b6d000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf41e1cf5] [@0xf3b6d000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf41e436d] [@0xf3b6d000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf41e57a3] [@0xf3b6d000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf41f81b2] [@0xf3b6d000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf41d4863] [@0xf3b6d000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf3c44111] [@0xf3b6d000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf3c47268] [@0xf3b6d000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf3f7446a] [@0xf3b6d000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/AcroForm.api [0xf3f74e6d] [@0xf3b6d000]
/usr/bin/acroread [0x892da33] [@0x8048000]
/usr/bin/acroread [0x873dee9] [@0x8048000]
/usr/bin/acroread [0x8741530] [@0x8048000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/DigSig.api [0xf361fd53] [@0xf35f5000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/DigSig.api [0xf3628217] [@0xf35f5000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/DigSig.api [0xf36e3f01] [@0xf35f5000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/DigSig.api [0xf36e3f9e] [@0xf35f5000]
/usr/bin/acroread [0x892f7e7] [@0x8048000]
/usr/bin/acroread [0x8744a50] [@0x8048000]
/usr/bin/acroread [0x825bdec] [@0x8048000]
/usr/bin/acroread [0x826bb11] [@0x8048000]
/usr/bin/acroread [0x826bd32] [@0x8048000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/Annots.api [0xf4ca1b4a] [@0xf4ba9000]
/opt/Adobe/Reader9/Reader/intellinux/plug_ins/Annots.api [0xf4ca1bec] [@0xf4ba9000]
/usr/bin/acroread [0x826c1c4] [@0x8048000]
/usr/bin/acroread [0x826d0bb] [@0x8048000]
/usr/bin/acroread [0x850193f] [@0x8048000]
/usr/bin/acroread [0x85024d2] [@0x8048000]
/usr/bin/acroread(main+0x87) [0x856686d] [@0x8048000]
/lib/libc.so.6(__libc_start_main+0xe6) [0x5ddbb6] [@0x5c7000]
Without renaming the .api, all I got was five 'dlopen success' messages, and "Segmentation fault (core dumped)", but a zero length log.
Don

Segmentation Fault in db- put() fun with BDB ver 4.5.20/4.6.19 in linux

I am working on porting an application that runs on sun solaris sparc (OS ver 5.8) with Berkeley DB ver 4.2.50 into suse linux [ Linux version 2.6.5-7.244-smp (gcc version 3.3.3 (SuSE Linux)) ]. I have compiled the application in linux and i am getting segmentation fault error while running the application. The error occurs while the objects are loaded from the database into berkeley cache. The application fails in db->put function while loading the objects. This segmentation fault error is not consistently occuring every time on the same object. Sometimes it throws the error while loading the first object itself or sometimes it throws after loading couple of objects. But the stack trace shows the same function whenever it crashes.
Given below is the stack trace of the application when it throws SIGSEGV.
[INFO] [-1756589376] 14:23:24.406 BerkeleyCache : restoring database table metadata for table [BSCOffice]...
[INFO] [-1756589376] 14:23:24.406 BerkeleyCache : restoring database index metadata for table [BSCOffice]...
[INFO] [-1756589376] 14:23:24.408 Obj [BSCOffice] Col [BSCOfficeId] : Typ[TEXT] MaxLen[10] Null[Y]
[INFO] [-1756589376] 14:23:24.408 Obj [BSCOffice] Col [City] : Typ[TEXT] MaxLen[100] Null[Y]
[INFO] [-1756589376] 14:23:24.408 BerkeleyCache : creating table [BSCOffice.tbl]
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 182927004352 (LWP 14638)]
0x0000002a9643203a in __db_check_txn () from /opt/home/pesprm/local/db-4.6.19/db-4.6.19/build_unix/.libs/libdb-4.6.so
(gdb) where
#0 0x0000002a9643203a in __db_check_txn () from /opt/home/pesprm/local/db-4.6.19/db-4.6.19/build_unix/.libs/libdb-4.6.so
#1 0x0000002a9643475b in __db_put_pp () from /opt/home/pesprm/local/db-4.6.19/db-4.6.19/build_unix/.libs/libdb-4.6.so
#2 0x000000000043586b in esp::BerkeleyCache::insert_i (this=0x7fbfffe380, transactionId=866640768, pObj=0x7fbfffd3e0) at BerkeleyCache.cpp:838
#3 0x00000000004119c5 in RefServer::loadObject (this=0x7fbfffdbe0, objInfo=<value optimized out>, strPrimaryObjName=@0x7fbfffd6f0,
procParams=<value optimized out>) at BerkeleyCache.h:569
#4 0x0000000000419166 in RefServer::loadObjects (this=0x7fbfffdbe0) at RefServer.cpp:579
#5 0x0000000000419748 in main (argc=<value optimized out>, argv=<value optimized out>) at RefServer.cpp:296
The code that calls the db->put() function is given below:
<pre>
bool BerkeleyCache::insert_i(size_t transactionId, const CachePersistable* pObj)
     bdbcache::Table* pTable = findTable_i(pObj->getPersistInfo().getObjectName());
     if (pTable == NULL)
          return false;
     DB_TXN* txnp = (DB_TXN*)transactionId;
     if (txnp == NULL)
          return false;
     bdbcache::Index* pPrimaryKey = pTable->getPrimaryKey();
     if (pPrimaryKey == NULL)
          return false;
     if (pTable->getDataOffset() == -1)
          pTable->setDataOffset( (int)(pObj->getDataBufferStartPos() - pObj->getDataStartPos()) );
     DB* pdb = pTable->getDB();
     int rc = 0;
     Synchronize sync(pPrimaryKey->getKeyBufferCriticalSection());
     pPrimaryKey->getKeyValues(pObj, pPrimaryKey->getKeyBuffer());
     DBT key, data;
     memset(&key, 0, sizeof(DBT));
     key.flags = DB_DBT_USERMEM;
     key.data = (void*)pPrimaryKey->getKeyBuffer().getBuffer();
     key.ulen = key.size = pPrimaryKey->getKeyBuffer().getBufferLength();
     memset(&data, 0, sizeof(DBT));
     data.flags = DB_DBT_USERMEM;
     if (pTable->isPrimaryDb())
          data.data = (void*)pObj->getDataBufferStartPos();
          data.ulen = data.size = pObj->getDataBufferSize();
          rc = pdb->put(pdb, (DB_TXN*)transactionId, &key, &data, DB_NOOVERWRITE);
     else
          const PersistInfo::Property* prop = pTable->getJoinProperty();
          Variant var = pObj->getValue( prop );
          int n = 0;
          switch (prop->_eType)
               case PersistInfo::CHAR_ARRAY:
               case PersistInfo::STRING:
               case PersistInfo::VAR_STRING:
                    const char* pch = (const char*)var;
                    data.data = (void*)pch;
                    data.ulen = data.size = (int)strlen(pch) + 1;
                    break;
               case PersistInfo::INT:
                    n = (int)var;
                    data.data = (void*)&n;
                    data.ulen = data.size = sizeof(int);
                    break;
          rc = pdb->put(pdb, (DB_TXN*)transactionId, &key, &data, 0);
     if (rc!= DB_SUCCESS)
          //_app.logError("BerkeleyCache : DB->put() failed [%s]", db_strerror(rc));
          _app.logInfo("ERROR:BerkeleyCache : DB->put() failed [%s]", db_strerror(rc));
          return false;
     return true;
</pre>
At the end of this function, the return value of db->put is checked for DB_SUCCESS. The application never executed this line when it throws SIGSEGV.
I have tried using the BDB versions 4.5.20/4.6.18/4.6.19 with the application and it throws segmentation fault error with all versions of BDB. Following are the cache related configurable parameters that we use in our application.
cache size = 16 MB
page size = 16 KB
max locks = 3000000
dirty read = N
We are using the Sybase Adaptive DB server running in Solaris/Linux servers. The same application that runs in Solaris connecting to Sybase DB (in solaris) is working perfectly fine. And the application that i am working in linux connects to the Sybase DB running in linux server.
Please let me know what could be the issue that is causing our application to segmentation fault.
Thanks
Senthil

I am working on porting an application that runs on
sun solaris sparc (OS ver 5.8) with Berkeley DB ver
4.2.50 into suse linux [ Linux version
2.6.5-7.244-smp (gcc version 3.3.3 (SuSE Linux)) ].
I have compiled the application in linux and i am
getting segmentation fault error while running the
application. The error occurs while the objects areWhich indicates in almost every typical case, for a well used library like berkeleydb, an application issue.
loaded from the database into berkeley cache. The
application fails in db->put function while loading
the objects. This segmentation fault error is not
consistently occuring every time on the same object.Also indicative of typical misuse of heap, pointer errors, or otherwise undefined behavior on the application's part.
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 182927004352 (LWP 14638)]
0x0000002a9643203a in __db_check_txn () from
/opt/home/pesprm/local/db-4.6.19/db-4.6.19/build_unix/
.libs/libdb-4.6.so
(gdb) where
#0 0x0000002a9643203a in __db_check_txn () from
/opt/home/pesprm/local/db-4.6.19/db-4.6.19/build_unix/
.libs/libdb-4.6.so
#1 0x0000002a9643475b in __db_put_pp () from
/opt/home/pesprm/local/db-4.6.19/db-4.6.19/build_unix/
.libs/libdb-4.6.so
#2 0x000000000043586b in
esp::BerkeleyCache::insert_i (this=0x7fbfffe380,
transactionId=866640768, pObj=0x7fbfffd3e0) at
BerkeleyCache.cpp:838
#3 0x00000000004119c5 in RefServer::loadObject
(this=0x7fbfffdbe0, objInfo=<value optimized out>,
strPrimaryObjName=@0x7fbfffd6f0,
procParams=<value optimized out>) at
BerkeleyCache.h:569
4 0x0000000000419166 in RefServer::loadObjects
(this=0x7fbfffdbe0) at RefServer.cpp:579
#5 0x0000000000419748 in main (argc=<value optimized
out>, argv=<value optimized out>) at
RefServer.cpp:296Did you build the libraries stripped or otherwise remove debugging information?
run "file /opt/home/pesprm/local/db-4.6.19/db-4.6.19/build_unix/.libs/libdb-4.6.so"
Also, if I'm not mistaken this is Linux you're porting to, right? Might want to drop the "/opt" Solaris-ism as you continue to port more to Linux.
The code that calls the db->put() function is given
below:
     if (pTable->getDataOffset() == -1)Does this return an unsigned or signed value?
pTable->setDataOffset(
t( (int)(pObj->getDataBufferStartPos() -
pObj->getDataStartPos()) );You cast to int here, what's the background reasoning for it?
     DB* pdb = pTable->getDB();
     int rc = 0;You don't check pdb is valid.
Synchronize
e sync(pPrimaryKey->getKeyBufferCriticalSection());
pPrimaryKey->getKeyValues(pObj,
, pPrimaryKey->getKeyBuffer());
     DBT key, data;
     memset(&key, 0, sizeof(DBT));
     key.flags = DB_DBT_USERMEM;
key.data =
= (void*)pPrimaryKey->getKeyBuffer().getBuffer();Do you verify this is even valid? Have you also checked the code within a debugger and verified the logic is correct?
key.ulen = key.size =
= pPrimaryKey->getKeyBuffer().getBufferLength();Same thing.
     memset(&data, 0, sizeof(DBT));
     data.flags = DB_DBT_USERMEM;
     if (pTable->isPrimaryDb())
          data.data = (void*)pObj->getDataBufferStartPos();
          data.ulen = data.size = pObj->getDataBufferSize();How do we know these are even valid? You're coming from the perspective that your code makes no mistakes when I have a hunch it does.
rc = pdb->put(pdb, (DB_TXN*)transactionId, &key,
y, &data, DB_NOOVERWRITE);Right, and this will most definitely result in a segmentation violation if you don't pass it valid data.
You're on Linux, I highly suggest you download and build Valgrind, run your application w/ valgrind --tool=memcheck, and get back to us. Also, don't strip debugging information from the berkeley db libraries during this phase of troubleshooting - especially when you're still porting something over.
I have tried using the BDB versions
4.5.20/4.6.18/4.6.19 with the application and it
throws segmentation fault error with all versions of
BDB.Because the issue isn't within BDB.
We are using the Sybase Adaptive DB server running in
Solaris/Linux servers. The same application that
runs in Solaris connecting to Sybase DB (in solaris)
is working perfectly fine.More correctly, it was working perfectly fine under Solaris. That doesn't even mean that it's not taking part in undefined behavior - it just means it "worked."

Cheese (3.4.2-1) Segmentation Fault

Good day, everybody.
I have a problem with Cheese. Today i bought a Webcam, then i tried to install cheese. Everything was ok until i launch the app. It says
(cheese:1952): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:1952): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:1952): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:1952): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:1952): Gtk-WARNING **: Attempting to add a widget with type GtkGrid to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel
(cheese:1952): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel
** (cheese:1952): CRITICAL **: cheese_camera_device_get_uuid: assertion `CHEESE_IS_CAMERA_DEVICE (device)' failed
Segmentation fault
Do you guys have any idea what could happen?
Thank you so much.
Ps. The camera is Microsoft Corp. LifeCam Cinema
Last edited by japenagosc (2012-06-21 13:51:30)

you really want to know about this bug?:D
here is an explanation: https://plus.google.com/u/0/10487728728 … rHDgRNc1gi
here is the bug: https://bugs.webkit.org/show_bug.cgi?id=89358
our bug: https://bugs.archlinux.org/task/29809

Error during up2date oracle-validated gives segmentation fault

Hi all,
I am trying to run the up2date oracle-validated command for Oracle Enterprise Linux 5 64 bit and it
fails on memory dump errors.
[root@tstdb01]# up2date oracle-validated
Fetching Obsoletes list for channel: el5_x86_64_latest...
Fetching rpm headers...
Segmentation fault
Any ideas how to resolve this?
Edited by: 783904 on Aug 19, 2010 9:09 AM

# cat /etc/sysconfig/rhn/up2date
# Automatically generated Red Hat Update Agent config file, do not edit.
# Format: 1.0
enableRollbacks[comment]=Determine if up2date should create rollback rpms
enableRollbacks=0
noSSLServerURL[comment]=Remote server URL without SSL
noSSLServerURL=http://linux-update.oracle.com/XMLRPC
useNoSSLForPackages[comment] =Use the noSSLServerURL for package, package list, and header fetching
useNoSSLForPackages=0
debug[comment]=Whether or not debugging is enabled
debug=0
noReplaceConfig[comment]=When selected, no packages that would change configuration data are automatically installed
noReplaceConfig=1
retrieveOnly[comment]=Retrieve packages only
retrieveOnly=0
keepAfterInstall[comment]=Keep packages on disk after installation
keepAfterInstall=0
systemIdPath[comment]=Location of system id
systemIdPath=/etc/sysconfig/rhn/systemid
serverURL[comment]=Remote server URL
serverURL=https://linux-update.oracle.com/XMLRPC
pkgSkipList[comment]=A list of package names, optionally including wildcards, to skip
pkgSkipList=kernel*;
pkgsToInstallNotUpdate[comment]=A list of provides names or package names of packages to install not update
pkgsToInstallNotUpdate=kernel;kernel-modules;kernel-devel;
adminAddress[comment]=List of e-mail addresses for update agent to communicate with when run in batch mode
adminAddress=root@localhost;
storageDir[comment]=Where to store packages and other data when they are retrieved
storageDir=/var/spool/up2date
fileSkipList[comment]=A list of file names, optionally including wildcards, to skip
fileSkipList=;
removeSkipList[comment]=A list of package names, optionally including wildcards that up2date will not remove
removeSkipList=kernel*;
enableProxy[comment]=Use a HTTP Proxy
enableProxy=0
retrieveSource[comment]=Retrieve source RPM along with binary package
retrieveSource=0
versionOverride[comment]=Override the automatically determined system version
versionOverride=
httpProxy[comment]=HTTP proxy in host:port format, e.g. squid.redhat.com:3128
httpProxy=
useGPG[comment]=Use GPG to verify package integrity
useGPG=1
gpgKeyRing[comment]=The location of the gpg keyring to use for package checking
gpgKeyRing=/etc/sysconfig/rhn/up2date-keyring.gpg
noBootLoader[comment]=To disable modification of the boot loader (lilo, silo, etc)
noBootLoader=0
noReboot[comment]=Disable the reboot actions
noReboot=0
networkRetries[comment]=Number of attempts to make at network connections before giving up
networkRetries=5
updateUp2date[comment]=Allow up2date to update itself when possible
updateUp2date=1
disallowConfChanges[comment]=Config options that can not be overwritten by a config update action
disallowConfChanges=noReboot;sslCACert;useNoSSLForPackages;noSSLServerURL;serverURL;disallowConfChanges;
sslCACert[comment]=The CA cert used to verify the ssl server
sslCACert=/usr/share/rhn/ULN-CA-CERT
[root@tstdb01 up2date]# *up2date --show-channels*el5_x86_64_latest

Notify segmentation fault from C++ in JVM

Hello,
I have a Java application which is doing a request to a C++ application through JNI.
The Java application does not wait the end of the treatment in the C++ part (The work done in the C++ part is about 30 minutes long).
How could I be notified that a "segmentation fault" or such error occured in the C++ application, BEFORE doing another call with the java application???
I want to be able to nofify the user that his request for the work performed in the C++ part has failed without waiting that the user requests again the information.
Thanks a lot for your help.
Tanguy

Search on the topic "callback".

Nm-applet No keyring secrets found Segmentation fault

I get segfault whenever I want to connect to a new protected (WPA) wifi network.
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
** Message: No keyring secrets found for homewifi/802-11-wireless-security; asking user.
Segmentation fault
It works if I logged in as root. Once I have connected to a wifi network in root, I can connect to the registered wifi network when I login with my user account.
After I logged in with my user account, and connected to homewifi, I launch nm-connection-editor. I select the Wireless Security tab, and attempt to change password, I get
** (nm-connection-editor:3920): WARNING **: nm_connection_list_new: failed to load VPN plugins: Couldn't read VPN .name files directory /etc/NetworkManager/VPN.
(nm-connection-editor:3920): Gtk-WARNING **: No object called: wireless_device_mac
Segmentation fault
Any help?

Strike0 wrote:Have a look here. Maybe that solves it already.
which is stupid and not relevant to this problem. networkmanager 0.9 doesn't use gnome-keyring unless is a VPN connection or a wireless using WPA enterprise based on certificates.
PROPER SOLUTION:
compile network-manager-applet with debug symbols, start nm-applet in gdb and get a trace
https://wiki.archlinux.org/index.php/De … tings_only
Last edited by wonder (2012-01-13 19:09:21)

Solaris 9 live upgrade to solaris 10 segmentation fault

pre-upgrade work:
apply patch doc 72099
upgrade live upgrade to solaris 10.
lucreate-m /:/dev/dsk/c0t1d0s0:ufs -m /var:/dev/dsk/c0t1d0s1:ufs -m /opt:/dev/dsk/c0t1d0s3:ufs -n sol10
it works well
oot Environment Is Active Active Can Copy
Name Complete Now On Reboot Delete Status
sol9 yes yes yes no -
sol10 yes no no yes -
But luupgrade -u -n sol10 -s /sol11
Validating the contents of the media </sol11>.
The media is a standard Solaris media.
The media contains an operating system upgrade image.
The media contains <Solaris> version <11>.
Constructing upgrade profile to use.
Locating the operating system upgrade program.
Checking for existence of previously scheduled Live Upgrade requests.
Creating upgrade profile for BE <sol10>.
Determining packages to install or upgrade for BE <sol10>.
Performing the operating system upgrade of the BE <sol10>.
CAUTION: Interrupting this process may leave the boot environment unstable
or unbootable.
/usr/sbin/luupgrade[677]: 6549 Segmentation Fault(coredump)
ERROR: Installation of the packages from this media of the media failed; pfinstall returned these diagnostics:
The Solaris upgrade of the boot environment <sol10> failed.

I would break your mirror and do a liveupgrade on the available mirror. Then boot that disk.

Spotify crashes with ALSA. Segmentation Fault

Spotify crashes on Spotify works like So I have completly Ive tried editing /usr/bin/spotify, Tried symlinking libcrypto But still cant get it to work.
[thomas@localhost ~]$ spotify
/usr/share/spotify/spotify: /usr/share/spotify/spotify: Fontconfig warning: 23:22:44.680 I [breakpad.cpp:62 23:22:44.681 I [translate.cpp:123 23:22:44.683 I [breakpad.cpp:192 23:22:44.809 A [CefModule.cpp:327 23:22:44.836 I [offline_auth 23:22:44.972 I [ap:1755 23:22:45.071 I [ap:1229 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:987 23:22:45.389 I [mainview:987 23:22:45.389 I [mainview:987 23:22:45.389 I [mainview:987 23:22:45.389 I [mainview:987 23:22:45.389 I [mainview:987 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.389 I [mainview:984 23:22:45.391 I [upnp:508 23:22:45.413 I [AppManager.cpp:147 23:22:45.414 I [AppManager.cpp:147 23:22:45.415 I [AppManager.cpp:147 23:22:45.416 I [AppManager.cpp:147 23:22:45.418 I [AppManager.cpp:189 23:22:45.605 I [mainview:6830 23:22:45.847 I [mainview:6830 23:22:46.317 I [ad:1066 23:22:47.490 I [upnp:456 23:22:47.510 I [upnp:482 23:22:48.233 I [AppManager.cpp:189 23:22:48.427 I [mainview:6830 23:22:48.624 I [ad:1066 (spotify:21036): Gtk-CRITICAL 23:22:49.042 I [mainview:6830 23:22:51.736 I [audio_driver_linux.cpp:35 /usr/bin/spotify: line [thomas@localhost ~]$
Any suggestions? song-change with ALSA. "Segmentation Fault".
a charm when I use pulseaudio. But i dont want to use pulseaudio, i want it to work with ALSA.
removed pulseaudio.
xaos3k suggestion on the AUR page.
and libssl.
/usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/share/spotify/spotify)
/usr/lib/libssl.so.0.9.8: no version information available (required by /usr/share/spotify/spotify)
"/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
] Registered Breakpad for product: spotify
] Reloading language file
] Searching for crashdumps: /home/thomas/.cache/spotify/*.dmp
] Check failed: g_cef_handle:
orizer.cpp:306 ] Unable to login offline: no such user
] Connecting to AP E5.spotify.com:4070
] Connected to AP: 78.31.8.98:4070
] Registering bundled app html with version 0.1.0
] Registering bundled framework import with version 0.1.0
] Registering bundled framework bridge-desktop with version 0.4.0
] Registering bundled framework api with version 0.1.0
] Registering bundled framework resources with version 0.2.0
] Registering bundled framework unstable with version 0.2.1
] Registering bundled framework util with version 0.1.0
] Registering bundled app album-header with version 1.0.0
] Registering bundled app bundles with version 1.0.0
] Registering bundled app error with version 1.0.0
] Registering bundled app feed with version 1.0.3
] Registering bundled app finder with version 1.1.0
] Registering bundled app home with version 1.0.0
] Registering bundled app install with version 1.0.0
] Registering bundled app people with version 1.0.0
] Registering bundled app profile with version 1.0.3
] Registering bundled app profile-header with version 1.0.3
] Registering bundled app radio with version 1.0.1
] Registering bundled app search-dropdown with version 1.0.1
] Registering bundled app search-header with version 1.0.0
] Registering bundled app share with version 1.0.2
] Registering bundled app subscribe-popup with version 1.1.0
] Registering bundled app og-popup with version 1.0.1
] Registering bundled app notification-popup with version 0.0.24
] 192.168.15.1: got external ip 0xA00000C
] Created instance of the application feed.
] Created instance of the application search-dropdown.
] Created instance of the application notification-popup.
] Created instance of the application home.
] Keeping application What's New alive for 60000 ms.
] Load complete (0) url: sp://feed/index.html
] Load complete (0) url: sp://home/index.html
] Found ad (time = 1352762588, adclass = 'mpu', time left = 0, length = 86400)
] 192.168.15.1: mapping add ok
] 192.168.15.1: Port 50099 mapped OK
] Keeping application What's New alive for 60000 ms.
] Load complete (0) url: http://track.adform.net/invisible.gif
] Found ad (time = 1352762590, adclass = 'tower', time left = 30, length = 15)
**: IA__gtk_window_resize: assertion `width > 0' failed
] Load complete (0) url: http://rad.msn.com/
] Using Alsa
8: 21036 Minnesegmentsfeil LD_LIBRARY_PATH="/usr/bin/;/usr/share/spotify/libs/" /usr/share/spotify/spotify "$@"

Anyone else having trouble using alsa with spotify?

SMPlayer - Segmentation Fault - QXcbShmImage: shmget() failed (22)

Similar Messages

Maybe you are looking for