SMPlayer vs. Mplayer - behaviour after resuming a pause

For a few weeks I've been experiencing a change in SMPlayer behaviour after resuming a pause of playing a video - motion of the video is jerked for a few seconds. However, I don't experience this with MPlayer. Has anybody else noticed this or does anybody know what could I do to make SMPlayer work normally?

I've turned an extended log of MPlayer on and so these are logs created during a short play with some pauses (with jerked motions after resuming):
SMPlayer log (just extract, couldn't copy the whole log, but it doesn't seem to contain something relevant):
[22:40:33:653] Core::pause
[22:40:33:653] Core::pause: current state: Playing
[22:40:33:653] Core::tellmp: 'pause'
[22:40:33:707] MplayerProcess::parseLine: ''
[22:40:33:707] MplayerProcess::parseLine: ' ===== PAUSE ====='
[22:40:33:708] MplayerProcess::parseLine: ''
[22:40:33:708] MplayerProcess::parseLine: 'ID_PAUSED'
[22:40:33:708] Core::changePause
[22:40:33:708] Core::changePause: mplayer reports that it's paused
[22:40:33:708] BaseGui::displayState: Paused
[22:40:33:708] BaseGui::togglePlayAction
[22:40:33:709] BaseGui::checkStayOnTop
[22:40:35:104] Core::pause
[22:40:35:104] Core::pause: current state: Paused
[22:40:35:104] Core::tellmp: 'pause'
[22:40:35:143] BaseGui::displayState: Playing
[22:40:35:143] BaseGui::togglePlayAction
[22:40:35:144] Core::changeCurrentSec: mplayer reports that now it's playing
[22:40:35:147] BaseGui::checkStayOnTop
[22:40:38:432] Core::pause
[22:40:38:432] Core::pause: current state: Playing
[22:40:38:432] Core::tellmp: 'pause'
[22:40:38:507] MplayerProcess::parseLine: ''
[22:40:38:508] MplayerProcess::parseLine: ' ===== PAUSE ====='
[22:40:38:508] MplayerProcess::parseLine: ''
[22:40:38:508] MplayerProcess::parseLine: 'ID_PAUSED'
[22:40:38:508] Core::changePause
[22:40:38:508] Core::changePause: mplayer reports that it's paused
[22:40:38:508] BaseGui::displayState: Paused
[22:40:38:509] BaseGui::togglePlayAction
[22:40:38:509] BaseGui::checkStayOnTop
[22:40:42:012] BaseGui::showMplayerLog
[22:40:56:875] BaseGui::showLog
MPlayer log (I've cut out a long list of subtitles' lines):
/usr/bin/mplayer -noquiet -v -nofs -nomouseinput -sub-fuzziness 1 -identify -slave -vo xv:adaptor=0 -ao alsa -nokeepaspect -framedrop -autosync 100 -nodr -nodouble -input nodefault-bindings:conf=/dev/null -stop-xscreensaver -wid 52429143 -monitorpixelaspect 1 -ass -embeddedfonts -ass-line-spacing 0 -ass-font-scale 1 -ass-styles /home/ondra/.config/smplayer/styles.ass -fontconfig -font Arial -subfont-autoscale 0 -subfont-osd-scale 20 -subfont-text-scale 20 -subcp CP1250 -vid 0 -aid 2 -sub /home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt -subpos 100 -volume 32 -nocache -ss 417 -osdlevel 0 -idx -vf-add ass -vf-add screenshot -slices -channels 2 -af scaletempo,equalizer=0:0:0:0:0:0:0:0:0:0 -softvol -softvol-max 100 /mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.avi
MPlayer SVN-r32492-4.5.1 (C) 2000-2010 MPlayer Team
CPU vendor name: GenuineIntel max cpuid level: 2
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (Family: 15, Model: 2, Stepping: 7)
extended cpuid-level: 4
Detected cache-line size is 64 bytes
Testing OS support for SSE... yes.
Tests of OS support for SSE passed.
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNowExt: 0 SSE: 1 SSE2: 1 SSSE3: 0
Compiled with runtime CPU detection.
get_path('codecs.conf') -> '/home/ondra/.mplayer/codecs.conf'
Reading /home/ondra/.mplayer/codecs.conf: Can't open '/home/ondra/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: 159 audio & 349 video codecs
init_freetype
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
get_path('fonts') -> '/home/ondra/.mplayer/fonts'
Configuration: --prefix=/usr --enable-runtime-cpudetection --disable-gui --disable-arts --disable-liblzo --disable-speex --disable-openal --disable-fribidi --disable-libdv --disable-musepack --disable-esd --disable-mga --enable-xvmc --language=all --confdir=/etc/mplayer
CommandLine: '-noquiet' '-v' '-nofs' '-nomouseinput' '-sub-fuzziness' '1' '-identify' '-slave' '-vo' 'xv:adaptor=0' '-ao' 'alsa' '-nokeepaspect' '-framedrop' '-autosync' '100' '-nodr' '-nodouble' '-input' 'nodefault-bindings:conf=/dev/null' '-stop-xscreensaver' '-wid' '52429143' '-monitorpixelaspect' '1' '-ass' '-embeddedfonts' '-ass-line-spacing' '0' '-ass-font-scale' '1' '-ass-styles' '/home/ondra/.config/smplayer/styles.ass' '-fontconfig' '-font' 'Arial' '-subfont-autoscale' '0' '-subfont-osd-scale' '20' '-subfont-text-scale' '20' '-subcp' 'CP1250' '-vid' '0' '-aid' '2' '-sub' '/home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt' '-subpos' '100' '-volume' '32' '-nocache' '-ss' '417' '-osdlevel' '0' '-idx' '-vf-add' 'ass' '-vf-add' 'screenshot' '-slices' '-channels' '2' '-af' 'scaletempo,equalizer=0:0:0:0:0:0:0:0:0:0' '-softvol' '-softvol-max' '100' '/mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.avi'
Using nanosleep() timing
Terminal type `unknown' is not defined.
Parsing input config file /dev/null
Input config file /dev/null parsed: 0 binds
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
get_path('Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.avi.conf') -> '/home/ondra/.mplayer/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.avi.conf'
Playing /mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.avi.
get_path('sub/') -> '/home/ondra/.mplayer/sub/'
[file] File size is 821880832 bytes
STREAM: [file] /mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.avi
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
LAVF_check: AVI format
AVI file format detected.
list_end=0x3324
======= AVI Header =======
us/frame: 40000 (fps=25.000)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (272) HAS_INDEX IS_INTERLEAVED
frames total: 133641 initial: 0
streams: 3
Suggested BufferSize: 0
Size: 640 x 368
==========================
list_end=0x10F4
==> Found video stream: 0
ID_VIDEO_ID=0
[aviheader] Video stream found, -vid 0
====== STREAM Header =====
Type: vids FCC: xvid (64697678)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 0
Rate: 25/1 = 25.000
Start: 0 Len: 133641
Suggested BufferSize: 125416
Quality 10000
Sample size: 0
==========================
Found 'bih', 40 bytes of 40
======= VIDEO Format ======
biSize 40
biWidth 640
biHeight 368
biPlanes 1
biBitCount 24
biCompression 1145656920='XVID'
biSizeImage 1413120
===========================
Regenerating keyframe table for MPEG-4 video.
list_end=0x2186
==> Found audio stream: 1
ID_AUDIO_ID=1
[aviheader] Audio stream found, -aid 1
====== STREAM Header =====
Type: auds FCC: (0)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 1
Rate: 16000/384 = 41.667
Start: 0 Len: 222719
Suggested BufferSize: 8064
Quality -1
Sample size: 384
==========================
Found 'wf', 30 bytes of 18
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 48000
avg byte/sec: 16000
Block align: 384
bits/sample: 0
cbSize: 12
mp3.wID=1
mp3.fdwFlags=0x2
mp3.nBlockSize=384
mp3.nFramesPerBlock=1
mp3.nCodecDelay=0
==========================================================================
list_end=0x3218
==> Found audio stream: 2
ID_AUDIO_ID=2
[aviheader] Audio stream found, -aid 2
====== STREAM Header =====
Type: auds FCC: (0)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 1
Rate: 16000/384 = 41.667
Start: 0 Len: 222735
Suggested BufferSize: 8064
Quality -1
Sample size: 384
==========================
Found 'wf', 30 bytes of 18
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 48000
avg byte/sec: 16000
Block align: 384
bits/sample: 0
cbSize: 12
mp3.wID=1
mp3.fdwFlags=0x2
mp3.nBlockSize=384
mp3.nFramesPerBlock=1
mp3.nCodecDelay=0
==========================================================================
list_end=0x3324
AVI: dmlh found (size=248) (total_frames=133641)
list_end=0x3364
hdr=Software size=43
Software : VirtualDubMod 1.5.4.1 (build 2066/release)
list_end=0x309B07A2
Found movie at 0x380C - 0x309B07A2
Reading INDEX block, 400890 chunks for 133641 frames (fpos=815466410).
AVI index offset: 0x3808 (movi=0x380C idx0=0x4 idx1=0x1F8C)
Auto-selected AVI audio ID = 2
Auto-selected AVI video ID = 0
AVI: Searching for audio stream (id:2)
AVI video size=641146236 (133641) audio size=85530240 (222735)
VIDEO: [XVID] 640x368 24bpp 25.000 fps 959.5 kbps (117.1 kbyte/s)
Auto-selected AVI audio ID = 2
[V] filefmt:3 fourcc:0x44495658 size:640x368 fps:25.000 ftime:=0.0400
Clip info:
Software: VirtualDubMod 1.5.4.1 (build 2066/release)
ID_CLIP_INFO_NAME0=Software
ID_CLIP_INFO_VALUE0=VirtualDubMod 1.5.4.1 (build 2066/release)
ID_CLIP_INFO_N=1
File not found: '/home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt'
Failed to open /home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt.
File not found: '/home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt'
Failed to open /home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt.
[ass] ass_read_file(/home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt): fopen failed
Cannot load subtitles: /home/ondra/Plocha/Poirot - S12E02 - The Clocks - ENG.srt
get_path('sub/') -> '/home/ondra/.mplayer/sub/'
[file] File size is 115710 bytes
STREAM: [file] /mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.srt
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
SUB: Detected subtitle file format: subviewer
SUB: opened iconv descriptor.
SUB: closed iconv descriptor.
SUB: Read 1352 subtitles, 0 bad line(s).
[file] File size is 115710 bytes
STREAM: [file] /mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.srt
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
[ass] Opened iconv descriptor
[ass] Closed iconv descriptor
[ass] File size: 300
[ass] Opened iconv descriptor
[ass] Closed iconv descriptor
[ass] [0xa6f6ef8] Style: Default,Arial,20,&H00ffffff,&H00000000,&H00000000,0,0,2,1,1,2,20,20,8
plaintext event at 1000, +3000: Downloaded From www.AllSubs.org
plaintext event at 35920, +1670: - Good night Annie.\N- Good night Fi.
plaintext event at 5286120, +3590: - Yes please.\N- Let's start again.
plaintext event at 5290710, +10000: Downloaded From www.AllSubs.org
ID_FILE_SUB_ID=0
ID_FILE_SUB_FILENAME=/mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.srt
SUB: Added subtitle file (1): /mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.srt
ID_FILENAME=/mnt/ubuntu/home/sdilene/Hercule.Poirot.S12E01.Hodiny.DVDRip.XviD.cz.en-iNG.avi
ID_DEMUXER=avi
ID_VIDEO_FORMAT=XVID
ID_VIDEO_BITRATE=959504
ID_VIDEO_WIDTH=640
ID_VIDEO_HEIGHT=368
ID_VIDEO_FPS=25.000
ID_VIDEO_ASPECT=0.0000
ID_AUDIO_FORMAT=85
ID_AUDIO_BITRATE=128000
ID_AUDIO_RATE=0
ID_AUDIO_NCH=0
ID_START_TIME=0.00
ID_LENGTH=5345.64
ID_SEEKABLE=1
ID_CHAPTERS=0
X11 opening display: :0.0
vo: X11 color mask: FFFFFF (R:FF0000 G:FF00 B:FF)
vo: X11 running at 1680x1050 with depth 24 and 32 bpp (":0.0" => local display)
[x11] Current fstype setting doesn't honour any X atoms
[VO_XV] Using Xv Adapter #0 (NV17 Video Texture)
[xv common] Drawing no colorkey.
[xv common] Maximum source image dimensions: 2046x2046
Opening video filter: [screenshot]
Opening video filter: [ass]
[screenshot] query(Planar YV12) -> 3
[ass] FreeType library version: 2.4.4
[ass] FreeType headers version: 2.4.3
[ass] Init
get_path('fonts') -> '/home/ondra/.mplayer/fonts'
get_path('subfont.ttf') -> '/home/ondra/.mplayer/subfont.ttf'
[ass] Updating font cache
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
INFO: libavcodec init OK!
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
ID_VIDEO_CODEC=ffodivx
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
mp3lib: using SSE optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer III, 48000 Hz 128 kbit Joint-Stereo, BPF: 384
Channels: 2, copyright: No, original: No, CRC: No, emphasis: 0
AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000)
ID_AUDIO_BITRATE=128000
ID_AUDIO_RATE=48000
ID_AUDIO_NCH=2
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Building audio filter chain for 48000Hz/2ch/s16le -> 0Hz/0ch/??...
[libaf] Adding filter scaletempo
[libaf] Adding filter equalizer
[scaletempo] 1.000 speed * 1.000 scale_nominal = 1.000
[libaf] Adding filter format
[format] Changing sample format from little-endian 16-bit signed int to little-endian 32-bit float
[format] Accelerated little-endian 16-bit signed int to little-endian 32-bit float conversion
[scaletempo] 1.000 speed * 1.000 scale_nominal = 1.000
[format] Changing sample format from little-endian 16-bit signed int to little-endian 32-bit float
[format] Accelerated little-endian 16-bit signed int to little-endian 32-bit float conversion
Trying preferred audio driver 'alsa', options '[none]'
alsa-init: requested format: 48000 Hz, 2 channels, 1d
alsa-init: using ALSA 1.0.23
alsa-init: setup for 1/2 channel(s)
alsa-init: using device default
alsa-init: pcm opened in blocking mode
alsa-init: got buffersize=65536
alsa-init: got period size 1024
alsa: 48000 Hz/2 channels/8 bpf/65536 bytes buffer/Float 32 bit Little Endian
AO: [alsa] 48000Hz 2ch floatle (4 bytes per sample)
AO: Description: ALSA-0.9.x-1.x audio output
AO: Author: Alex Beregszaszi, Zsolt Barat <[email protected]>
AO: Comment: under development
Building audio filter chain for 48000Hz/2ch/s16le -> 48000Hz/2ch/floatle...
[scaletempo] 1.000 speed * 1.000 scale_nominal = 1.000
[format] Changing sample format from little-endian 16-bit signed int to little-endian 32-bit float
[format] Accelerated little-endian 16-bit signed int to little-endian 32-bit float conversion
[scaletempo] 1.000 speed * 1.000 scale_nominal = 1.000
[format] Changing sample format from little-endian 16-bit signed int to little-endian 32-bit float
[format] Accelerated little-endian 16-bit signed int to little-endian 32-bit float conversion
ID_AUDIO_CODEC=mp3
[Mixer] No hardware mixing, inserting volume filter.
[libaf] Adding filter volume
[scaletempo] 1.000 speed * 1.000 scale_nominal = 1.000
[format] Changing sample format from little-endian 16-bit signed int to little-endian 32-bit float
[format] Accelerated little-endian 16-bit signed int to little-endian 32-bit float conversion
[scaletempo] 1.000 speed * 1.000 scale_nominal = 1.000
[format] Changing sample format from little-endian 16-bit signed int to little-endian 32-bit float
[format] Accelerated little-endian 16-bit signed int to little-endian 32-bit float conversion
Starting playback...
SEEK: i=31390 (max:31427) dpos=6703872 (wanted:6703872)
SEEK: idx=31390 (a:31390 v:31427) v.skip=12 a.skip=0/0.000
XXX initial v_pts=418.520 a_pos=8064 (0.504)
[libaf] Reallocating memory in module format, old len = 0, new len = 69637
Increasing filtered audio buffer size from 0 to 69632
[mpeg4 @ 0x8a2dc40]Invalid and inefficient vfw-avi packed B frames detected
[ffmpeg] aspect_ratio: 1.739130
VDec: vo config request - 640 x 368 (preferred colorspace: Planar YV12)
Trying filter chain: ass screenshot vo
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.74:1 - prescaling to correct movie aspect.
ID_VIDEO_ASPECT=1.7391
VO Config (640x368->640x368,flags=0,'MPlayer',0x32315659)
REQ: flags=0x437 req=0x0
[swscaler @ 0x8ad6520]using unscaled yuv420p -> rgb24 special converter
REQ: flags=0x437 req=0x0
VO: [xv] 640x368 => 640x368 Planar YV12
VO: Description: X11/Xv
VO: Author: Gerd Knorr <[email protected]> and others
Xvideo image format: 0x32595559 (YUY2) packed
Xvideo image format: 0x32315659 (YV12) planar
Xvideo image format: 0x59565955 (UYVY) packed
Xvideo image format: 0x30323449 (I420) planar
using Xvideo port 331 for hw scaling
*** [ass] Allocating mp_image_t, 640x368x12bpp YUV planar, 353280 bytes
*** [ass] Allocating mp_image_t, 640x368x12bpp YUV planar, 353280 bytes
[ass] PlayResX undefined, setting to 384
*** [vo] Allocating mp_image_t, 640x368x12bpp YUV planar, 353280 bytes
*** [screenshot] Direct Rendering mp_image_t, 640x368x12bpp YUV planar, 353280 bytes
Unicode font: 1185 glyphs.
Unicode font: 1185 glyphs.
*** [ass] Allocating mp_image_t, 640x368x12bpp YUV planar, 353280 bytes
===== PAUSE =====
ID_PAUSED
[ass] Font info: family 'Arial', style 'Normal', fullname 'Arial', slant 0, weight 80
[ass] fontconfig_select: (Arial, 80, 0) -> /usr/share/fonts/TTF/arial.ttf, 0
===== PAUSE =====
ID_PAUSED
===== PAUSE =====
ID_PAUSED
===== PAUSE =====
ID_PAUSED
So it seems there is no error during the resuming.

Similar Messages

IPhone & Universal Dock - No video out after resume from pause

OK - original 16GB iPhone, latest universal dock and Apple Composite cable, hooked to a 42" Sony LCD TV. iPhone is at latest revision.
Used to be that if I used the remote to pause a video, I could wander off, make a cup of coffee, and when I came back, even though the iPhone was locked, I could press play on the remote and carry on where I Ieft off. Recently though, when I try to resume from the paused state, I get sound but no video and I have to walk over to the docked iPhone, unlock it, and then I get video out.
I can only assume that this bug was introduced (or the previously working feature was removed) by a software update. Whatever the cause, it is a pain.
The cynic in me would assume that it is Apple's sneaky way of reducing the feature set to below the minimum expected so as to drive users to buy an Apple TV. The optimist in me assumes it is a bug and it CAN BE FIXED IN THE NEXT RELEASE!
Anybody else experienced this issue?
Message was edited by: TheFamousJames

I also believe this is a bug, but I found a workaround. I after starting the video you press the wake-up button, the iPhone screen goes off, but the video keeps playing. Now if you pause using the remote, you can also resume using the remote without having to unlock the iPhone.
The weirdest thing about this is that after doing it once, you can unlock you iPhone and be able to pause and resume as expected. As soon as you change the video (that is, you turn the video out off) the iPhone forgets what he just learned and doesn't resume from the remote again.
So as a rule I always turn the iPhone screen off after starting a video. So I'm able to use my remote nicely. I hope this works for you too... and that it gets corrected in the next SW version!

Database behaviour after Windows XP resumes from "Hibernation"

I am considering the following power failure handling model:
1. Connect an APC UPS to PC;
2. Configure "PowerChute" and PC so to "hibernate" the PC in case of power failure on the mains;
3. Do NOT shutdown the Oracle DB before the hibernation.
4. Let the Oracle DB resumes from hibernation. No need to shutdown / startup the database instance.
Are the Oacle DB designed to work properly after resuming from Windows XP hibernation? Any documentation mentioning this scenario? I've do article hunting but in vain.
Thanks.
Kenny

I haven't seen any documentation about this and I don't think I would plan for a production environment that has hibernation enabled but I hibernate my laptop all the time. I've nver had a problem with XE working after I resumed.
Normally, TOAD and/or SQL Developer will lose their connection. But that makes sense.
Thanks,
LewisC
http://blogs.ittoolbox.com/oracle/guide

Usb gone after resume from hibernate (since update?)

Hello!
Since a recent update, my wireless usb stick's interface isn't available any more after resume from hibernate. Removing it and connecting it to a different USB port does not help.
lsusb says, the device itsself is there.
I can see it being removed / added when I connect it to a different usb port.
The only interface iwconfig / ifconfig list is "lo" though. No wlan0 available.
No idea what to try next... any hints?
thx!
Last edited by whoops (2012-03-20 06:22:01)

Have there been issues with updates?
A while after that, my usb mouse/keyboard stopped working after resume, too.
Then after a few days, wifi started working...
Then usb input started working again...
Now usb input devices stopped working again -.-
I think there were updates (kernel, too) every time the behaviour changed... not sure though...
Still no idea what to do.

Fan Control fails after resume from pm-suspend

Hi,
i recently upgraded to 2.6.37 (on a hp nx6325 laptop) and noticed the following behaviour after a resume from pm-suspend:
The fan control stops working until cpu reaches a temperature of 60°. As soon as the temperatur passes this threshold the fan starts rotating at max. speed. Below 60°, the fan is turned off immediately.
pm-suspend.log:
disabled, not active
/usr/lib/pm-utils/sleep.d/01laptop-mode resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub resume suspend:
/usr/lib/pm-utils/sleep.d/01grub resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave resume suspend:
/usr/lib/pm-utils/sleep.d/00powersave resume suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging resume suspend:
/usr/lib/pm-utils/sleep.d/00logging resume suspend: success.
Don Feb 3 09:16:21 CET 2011: Finished.
Any ideas where to look for the problem?

I have the same problem with 2.6.37.1-1: suspend do not work.
The sceen goes blank then returns to X. The log shows the followings:
Feb 21 15:50:33 localhost kernel: Suspending console(s) (use no_console_suspend to debug)
Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Synchronizing SCSI cache
Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Stopping disk
Feb 21 15:50:33 localhost kernel: tpm_tis 00:03: Operation Timed out
Feb 21 15:50:33 localhost kernel: legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62
Feb 21 15:50:33 localhost kernel: PM: Device 00:03 failed to suspend: error -62
Feb 21 15:50:33 localhost kernel: PM: Some devices failed to suspend
Feb 21 15:50:33 localhost kernel: sd 2:0:0:0: [sda] Starting disk
Feb 21 15:50:33 localhost kernel: b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
Feb 21 15:50:33 localhost kernel: ------------[ cut here ]------------
Feb 21 15:50:33 localhost kernel: WARNING: at drivers/base/power/main.c:106 device_pm_add+0xb6/0xc0()
Feb 21 15:50:33 localhost kernel: Hardware name: HP Compaq 6715b (GB835EA#AKC)
Feb 21 15:50:33 localhost kernel: Device: misc
Feb 21 15:50:33 localhost kernel: Parentless device registered during a PM transaction
Feb 21 15:50:33 localhost kernel: Modules linked in: fuse ipv6 vboxnetflt vboxdrv snd_seq_dummy snd_seq_oss snd_seq_midi_event loop snd_seq arc4 ecb radeon b43 ttm drm_kms_helper mac80211 snd_pcm_oss drm snd_mixer_oss joydev snd_hda_codec_analog ssb tpm_infineon i2c_algo_bit cfg80211 hp_wmi mmc_core sparse_keymap tg3 ppdev rfkill snd_hda_intel parport_pc libphy pcmcia snd_hda_codec snd_usb_audio snd_pcm ohci_hcd yenta_socket pcmcia_rsrc pcmcia_core firewire_ohci snd_hwdep tpm_tis snd_usbmidi_lib hp_accel lis3lv02d i2c_piix4 video tpm snd_timer firewire_core evdev ehci_hcd snd_rawmidi crc_itu_t serio_raw snd_page_alloc tpm_bios output wmi input_polldev thermal battery lp sg ac container usbcore i2c_core button fan snd_seq_device shpchp parport edac_core edac_mce_amd snd pci_hotplug psmouse soundcore k8temp cpufreq_ondemand powernow_k8 freq_table processor mperf ext4 mbcache jbd2 crc16 sd_mod sr_mod cdrom ahci libahci pata_atiixp pata_acpi libata scsi_mod
Feb 21 15:50:33 localhost kernel: Pid: 12986, comm: pm-suspend Not tainted 2.6.37-ARCH #1
Feb 21 15:50:33 localhost kernel: Call Trace:
Feb 21 15:50:33 localhost kernel: [<ffffffff81056a1a>] warn_slowpath_common+0x7a/0xb0
Feb 21 15:50:33 localhost kernel: [<ffffffff81056af1>] warn_slowpath_fmt+0x41/0x50
Feb 21 15:50:33 localhost kernel: [<ffffffff812b8596>] device_pm_add+0xb6/0xc0
Feb 21 15:50:33 localhost kernel: [<ffffffff812aea8e>] device_add+0x4ae/0x5c0
Feb 21 15:50:33 localhost kernel: [<ffffffff812aebb9>] device_register+0x19/0x20
Feb 21 15:50:33 localhost kernel: [<ffffffff812aed53>] device_create_vargs+0x193/0x1b0
Feb 21 15:50:33 localhost kernel: [<ffffffff812aed9c>] device_create+0x2c/0x30
Feb 21 15:50:33 localhost kernel: [<ffffffff813a5fc1>] ? mutex_lock+0x11/0x30
Feb 21 15:50:33 localhost kernel: [<ffffffff8129a3fa>] misc_register+0x8a/0x140
Feb 21 15:50:33 localhost kernel: [<ffffffff8129d36f>] hwrng_register+0xdf/0x170
Feb 21 15:50:33 localhost kernel: [<ffffffffa0426ab0>] b43_wireless_core_init+0xdb0/0x11a0 [b43]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa0427068>] b43_op_start+0x1c8/0x1e0 [b43]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa0477a15>] ieee80211_reconfig+0x335/0x400 [mac80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d89e0>] ? wiphy_resume+0x0/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa046d8b8>] ieee80211_resume+0x28/0x70 [mac80211]
Feb 21 15:50:33 localhost kernel: [<ffffffffa02d8a55>] wiphy_resume+0x75/0x90 [cfg80211]
Feb 21 15:50:33 localhost kernel: [<ffffffff812b7ebe>] legacy_resume+0x3e/0x80
Feb 21 15:50:33 localhost kernel: [<ffffffff812b8025>] device_resume+0x125/0x130
Feb 21 15:50:33 localhost kernel: [<ffffffff812b8192>] dpm_resume_end+0x102/0x3a0
Feb 21 15:50:33 localhost kernel: [<ffffffff81096350>] suspend_devices_and_enter+0x90/0x1f0
Feb 21 15:50:33 localhost kernel: [<ffffffff810965d0>] enter_state+0x120/0x150
Feb 21 15:50:33 localhost kernel: [<ffffffff81095b16>] state_store+0xc6/0x100
Feb 21 15:50:33 localhost kernel: [<ffffffff811f3c27>] kobj_attr_store+0x17/0x20
Feb 21 15:50:33 localhost kernel: [<ffffffff8119f37f>] sysfs_write_file+0xcf/0x150
Feb 21 15:50:33 localhost kernel: [<ffffffff81135ac6>] vfs_write+0xc6/0x190
Feb 21 15:50:33 localhost kernel: [<ffffffff81135ddc>] sys_write+0x4c/0x80
Feb 21 15:50:33 localhost kernel: [<ffffffff8100bed2>] system_call_fastpath+0x16/0x1b
Feb 21 15:50:33 localhost kernel: ---[ end trace 19e4cbd37086936d ]---
Feb 21 15:50:33 localhost kernel: PM: resume of devices complete after 1300.325 msecs
Feb 21 15:50:33 localhost kernel: PM: Finishing wakeup.
Feb 21 15:50:33 localhost kernel: Restarting tasks ... done.
Feb 21 15:50:33 localhost kernel: video LNXVIDEO:00: Restoring backlight state
And the solution on linux.kernel: http://groups.google.com/group/linux.ke … 616cfdb4a9
Revert or wait!
Or rmmod tpm_tis.
Last edited by daroczig (2011-02-21 21:55:10)

Audio "disappears" after resuming VLC

Hi,
I'm on a fully updated Arch-X86_64/XFCE laptop connected via HDMI to a large screen TV.
I watch Full HD movies this way, preferably using VLC.
I have tried several ALSA/PULSE combinations with VLC's (advanced) Audio configuration output/device.
In all these audio "combinations", if I pause VLC, many times (but not always!), I have NO sound after resume.
Searching the Internet, the solution seems to be installing vlc-plugin-pulse.
However, I can't find it neither in the repositories nor in AUR.
Please advise!
Thanks

Does the same happen with using alsa directly? (hw:0 for example, PA would need to be killed for that probably)

Touchpad gets stuck scrolling after resume.

Hi, I have an acer V3-571G, running 3.10.15-1-lts (though this issue happens with the current stable kernel also).
Basically, if the laptop suspends and resumes, often it will get stuck in "scroll" mode, as if I already have a finger on it.
The current solution is to restart X but obviously this is quite tiresome if I'm trying to do some work.

ke7mbz wrote:It seems like, at least in my case, that it thinks I'm touching the touchpad with two fingers instead of one, and therefore tries to scroll. Do you have two finger scrolling enabled.
Yeah, two finger scrolling enabled and exactly the same behaviour after freezing.
ke7mbz wrote:I'm wondering if it's caused by a particular combination of touchpad options. That's why I asked about the DE. KDE offers alot more options than Gnome via synaptiks.
IIRC, when I still used Linux Mint, I had this problem with all DEs I worked with: Mate, Xfce and Cinnamon. With Arch I've used Xfce and mainly i3, same problem on both of them. Always with two finger scrolling on.
Sharing this information for helping OP and others, modprobe commands are enough for me even though I'm interested in the deeper reasons of this bug.

In vlc I hear sound ~500ms after I (pressed pause and video stopped)

Hi, In vlc sound plays ~500ms after I pressed pause and video stopped.
In mplayer it's the same. why can it be and how to fix it?
Thanks in advance.
Last edited by imm_yohan (2014-05-09 18:28:55)

clfarron4 wrote:I have this whilst playing videos with VLC, but only when I use VA API/VDPAU hardware acceleration. If I turn off all hardware acceleration in VLC, I get instant response.
It was disabled. I've tried to disable overlay as well, still the same.
It's laptop with Intel graphics 3000 as I can remember..
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Last edited by imm_yohan (2014-05-09 19:00:06)

Update to 10.6.8 - system hang (mouse issue) after resume from sleep

I am on older
MacBook Pro3.1
Intel Core 2 Duo
2.6GHz
Run on 10.6.8 almost flawelessly. Shortly after upgrade to 10.6.8 system started to hang periodically after resuming from sleep. Symptoms are that it stops responding to mouse (be it touch pad or USB mouse). Keyboard seems to be ok but system doesn't seem to be fully functional. I am able to ssh from the other computer and 'shutdown -r now' after reboot system seem to be ok until next resume from sleep. What interesting though is that this problem newer manifests then I am using external monitor.

Found problem. It was due to magic mouse that I left on. I carry this mouse in the laptop bag but rarely use it. Last time I used it (around the same time I install the update) I left it on in the bag. It was apparently disconnecting/connecting on its own and by some reason sometimes was breaking touch pad and other usb mouse connected to laptop, as soon as I switched magic mouse off broblem was fixed

USB ports don't work after resuming from standby with Windows 8 on X230 tablet

I have just done a clean install of Windows 8 on my X230 tablet. Before installing Windows 8 I installed the most recent BIOS for this machine (version 2.50). After installing Windows 8 I installed System Update from the Lenovo Website and downloaded all the recommended drivers and other files. I've also installed all the latest Windows 8 updates.
Here are the symptoms of my problem: After resuming from standby/sleep mode, my USB ports do not work. My computer has two USB 3.0 ports and one USB 2.0 ports. All exhibit the same behavior. After resuming from standby mode I have tried inserting both my mouse and a USB thumbdrive, but neither are recognized. After restarting Windows, the USB ports work again... until I resume from standby mode again.
I hope there is a solution to this issue. It is very frustrating.

Thanks for the suggestion about tweaking the "Allow this computer to turn off this device" feature. I un-checked that box for every entry I could find under "Universal Serial Bus Controllers" in the Devide Manager. Unfortunately, the same symptoms of my problem persisted.
I went back and looked at the README file associated with the BIOS 2.50 download on Lenvo's support site. At the bottom of the file it gives a "Summary of Changes". Under version 2.03 of the BIOS (the version just before version 2.50), it says:
- (Fix) Fixed an issue where USB device might not detected when system resume from sleep mode.
This indicates that Lenovo support was already aware of such issues. The problem was intended to be fixed in version 2.03 of the BIOS. However, the issue persists on my machine, even with the latest BIOS.
Hopefully someone from Lenovo can comment here.

System freeze after resume from suspend to RAM

Hi,
since quite a while (probably ever) I am unable to suspend my computer to RAM because everytime it freezes a few seconds after resuming, never to become alive again until a reboot. After some investigation, I managed to get kernel logs by taking a picture of my screen. The logs were not written to disk, hence I didn't see anything before. I had to write these by hand, I hope I didn't insert any mistakes:
kernel: sas: Enter sas_scsi_recover_host busy: 2 failed: 2
kernel: sas: trying to find task 0xfff880008b5b680
kernel: sas: sas_scsi_find_task: aborting task 0xfff880008b5b680
kernel: sas: sas_scsi_find_task: task 0xfff880008b5b680 is aborted
kernel: sas: sas_eh_handle_sas_errors: task 0xfff880008b5b680 is aborted
kernel: sas: trying to find task 0xffff8804606ccb40
kernel: sas: sas_scsi_find_task: aborting task 0xffff8804606ccb40
kernel: sas: sas_scsi_find_task: task 0xffff8804606ccb40 is aborted
kernel: sas: sas_eh_handle_sas_errors: task 0xffff8804606ccb40 is aborted
kernel: sas: ata7: end_device-0:0: cmd error handler
kernel: sas: ata8: end_device-0:1: cmd error handler
kernel: sas: ata7: end_device-0:0: dev error handler
kernel: ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
kernel: ata7.00: failed command: READ VERIFY SECTOR(S)
kernel: ata7.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 11
res 40/00:48:a0:79:88/00:00:07:00:00/40 Emask 0x4 (timeout)
kernel: ata7.00: status { DRDY }
kernel: ata7: hard resetting link
kernel: sas: ata8: end_device-0:1: dev error handler
kernel: ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
kernel: ata8.00: failed command: READ VERIFY SECTOR(S)
kernel: ata8.00: cmd 40/00:01:00:00:00/00:00:00:00:00/e0 tag 11
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
kernel: ata8.00: status { DRDY }
kernel: ata8: hard resetting link
This issue seems to be related to disk failures like bad sectors but I am quite sure, that my SSDs are in a good shape. I ran some SMART tests, they all turned out to be okay. Suspending from my dual-booted Windows works fine as well (although if the bad sector would be on the linux partition, it would probably not affect Windows).
Here's my setup:
$ lsblk -St
NAME HCTL TYPE VENDOR MODEL REV TRAN NAME ALIGNMENT MIN-IO OPT-IO PHY-SEC LOG-SEC ROTA SCHED RQ-SIZE RA WSAME
sda 1:0:0:0 disk ATA Corsair Force 3 2 sata sda 0 512 0 512 512 0 cfq 128 128 0B
sdb 7:0:0:0 disk ST1000DM 003-9YN162 NDP3 usb sdb 0 512 0 512 512 1 cfq 128 128 0B
sdc 0:0:0:0 disk ATA OCZ-REVODRIVE3 2.25 sas sdc 0 512 0 512 512 0 cfq 128 128 0B
sdd 0:0:1:0 disk ATA OCZ-REVODRIVE3 2.25 sas sdd 0 512 0 512 512 0 cfq 128 128 0B
sr0 2:0:0:0 rom TSSTcorp CDDVDW SH-222AL SB00 sata sr0 0 512 0 512 512 1 cfq 128 128 0B
$ lsblk -f
NAME FSTYPE LABEL UUID MOUNTPOINT
sda
├─sda1 ntfs Recovery 567437B974379B27
├─sda2 vfat DC2D-099E /boot
├─sda3
├─sda4 ntfs FEBED982BED933BD
├─sda5 ext4 arch 41bad924-84a2-4e0a-9cd4-4ea723a2a5a3 /
└─sda6 swap 793fb3c1-8bec-4023-a7c3-ee94eee2e67a [SWAP]
sdb
└─sdb1 ntfs HDDRIVE2GO 2212E50812E4E231
sdc
└─sdc1 linux_raid_member home:0 208937dc-2904-e71c-435a-9928671e07a3
└─md0 ext4 revodrive ffe9d38f-87f2-44e1-ae26-f36c910af3c5 /home
sdd
└─sdd1 linux_raid_member home:0 208937dc-2904-e71c-435a-9928671e07a3
└─md0 ext4 revodrive ffe9d38f-87f2-44e1-ae26-f36c910af3c5 /home
I am not sure which one of the disks causes the freeze but I assume it's the revodrive because the logs talk about two drives. The Revodrive internally holds two drives, which are set up to operate in a RAID 0. Windows is installed on the Corsair drive, and has no access to the Revodrive. However, I used to run Windows on the Revodrive a few years ago, and it worked just fine.
Another interesting thing is that when I try to test suspend to RAM, the system does not freeze, nor produce errors. This only happens if none is written to /sys/power/pm_test (which means no automated wake-up, no testing).
Any ideas on how I could narrow down this issue? Thanks a lot!
EDIT
I just checked and confirmed that this issue is originating from the OCZ Revodrive:
$ dmesg | grep ata7.00 | head
[ 7.136432] ata7.00: ATA-8: OCZ-REVODRIVE3, 2.25, max UDMA/133
[ 7.136436] ata7.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.146442] ata7.00: configured for UDMA/133
$ dmesg | grep ata8.00 | head
[ 7.310018] ata8.00: ATA-8: OCZ-REVODRIVE3, 2.25, max UDMA/133
[ 7.310023] ata8.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.320022] ata8.00: configured for UDMA/133
Last edited by tuttiarch (2015-01-31 15:54:29)

Thank you for the link, unfortunally I don't have a NVIDIA card but use the Intel IGP (HD4600, Haswell) - maybe I should have mentioned that...
And other than in this bug report I cannot kill X or anything because neither other TTYs work - I cannot input anything (although the hotkeys work weird enough) nor is SSHD running because the system is completely frozen...
Very funny thing is that for the last 2 days my system didnt freeze once (suspended about 6-7 times during one boot), even though for the 2 weeks prior to that, it froze EVERY SINGLE TIME I resumed from suspend, it didnt work once...

Touchpad permanently not working after resuming from suspend

I lost touchpad and trackpoint functionality after resuming from suspend on my ThinkPad E530 (3259CTO).
Even after a complete power off (with the battery removed), the touchpad is detected but doesn't send any event, and the trackpoint is not detected.
In Windows, in the UltraNav control panel, the touchpad is marked as enabled and cannot be disabled, the trackpoint is grayed.
In Linux, I can see the difference is kernel traces when the driver is loaded.
Before : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
Now : psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x0/0x0
After looking at https://gerrit.chromium.org/gerrit/#/c/31105/ and Synaptics public documentation, I was able to get more information : the device status register (F01_RMI_Data0) is 0x45, which means the touchpad is in flash programming mode since there is a firmware CRC failure.
It looks like http://code.google.com/p/chromium-os/issues/detail?id=24298, so it's probably not a Lenovo specific problem, but a bug in Synaptics firmware.
Can Lenovo provide the firmware to flash like http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X220-Touchpad-jumpy-response-when-used-with-90... which would hopefully make my touchpad working again ?
The original firmware should work, but an updated one would be better, if it avoids losing the touchpad again later.

I don't know why, but this made me think of the episode of the simpsons when home tries to get over 300 pounds so he can work from home. When he tries to dial the phone he hist all the buttons and gets a recording that says "We're sorry, you're fingers are too fat. To obtain a special dialing wand, please mash the keypad now."
BTW, sorry I can't help... but at least I am entertained easily.

Mad: Can't get wireless work either on boot or after resume: 3945ABG

lspci | grep Wireless
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
/etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="America/Detroit"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="myhost"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#gateway="default gw 192.168.0.1"
#ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
NETWORKS=(hw)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng net-profiles alsa hal)
/etc/network.d/hw
CONNECTION="wireless"
DESCRIPTION="A simple WEP encrypted wireless connection"
INTERFACE="wlan0"
SECURITY="wep"
ESSID="blablabla"
KEY="blablabla"
IP="dhcp"
This set of configuration dosen't get connected to internet. The wirless indication light is on but not blinking.
I can manually bring it up by using
sudo netcfg hw
The other problem, which I guess is very common to linux users, is the wireless isn't waked up after resume from suspend. In my case, it can't be waked up even if I use the manual method. This is more important than to get it work on boot because I usually put my computer to sleep instead of power down when I am not using it.
I am trying Arch Linux on my old laptop, if it works well, I'll put it into my work desktop.

Ramses de Norre wrote:
Can you post the output of
dmesg|grep iwl
this might be the same bug as a lot of people are having and which should be resolved in linux 2.6.32.3, which is currently in testing.
dmesg|grep iwl
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:03:00.0: setting latency timer to 64
iwl3945 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:03:00.0: irq 28 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-3945-rs'
iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX

Problems after resuming from hibernation

I’ve been getting horizontal lines and sound distortion after resuming from hibernation. Has anyone had similar problems or found a solution for this yet? I’m on Lion OS X 10.7.3.

Rorschach wrote:What freezes? Just X or the whole kernel? Can you ssh to your machine?
Now it doesn't freeze anymore. I really don't know what the heck is going on on my machine.
Next time that the machine freezes I'll try to ssh to it. Thank you for pointing this out.
Last edited by ArchArael (2010-03-26 15:56:17)

[Solved] Slock crash after resume

Hi there.
I recently experience something odd.
I call slock in /etc/systemd/system/[email protected] so that the screen is locked after resume.
What started only recently (I believe) is that (I assume) slock crashes about a minute after resume.
The only thing I can observe is that the lock screen is suddenly gone, without me touching anything.
If I enable slock manually this does not happen, so I assume that something kills slock.
Any ideas?
Last edited by PUE (2015-01-05 19:41:23)

$ cat /etc/systemd/system/[email protected]
[Unit]
Description=User suspend actions
Before=suspend.target
[Service]
User=%I
Type=forking
Environment=DISPLAY=:0
ExecStart=/usr/bin/slock
[Install]
WantedBy=suspend.target
There was no reference to slock in the journal. I will have to test again later. The journal output is obscured by:
...skipping...
No idea why anyone would think that it is helpful to not show part of the journal....
I have a couple of suspicious lines in there (reverse log because I don't know how to just search near the end), but I am not sure whether this is the problematic case:
Jan 04 14:29:54 eeyore systemd[1]: Stopped target Suspend.
Jan 04 14:29:54 eeyore systemd[1]: Stopping Suspend.
Jan 04 14:29:54 eeyore systemd[1]: Unit suspend.target is bound to inactive service. Stopping, too.
Jan 04 14:29:54 eeyore systemd-logind[295]: Operation finished.
Jan 04 14:29:54 eeyore systemd[1]: Reached target Suspend.
Jan 04 14:29:54 eeyore systemd[1]: Starting Suspend.
Jan 04 14:29:54 eeyore systemd[1]: [email protected] failed.
Jan 04 14:29:54 eeyore systemd[1]: Unit [email protected] entered failed state.
Jan 04 14:29:54 eeyore systemd[1]: Failed to start User suspend actions.
Jan 04 14:29:54 eeyore systemd[1]: [email protected] start operation timed out. Terminating.
Jan 04 14:28:44 eeyore systemd[469]: Time has been changed
Jan 04 14:28:44 eeyore systemd[1]: Time has been changed
Last edited by PUE (2015-01-05 17:54:01)

SMPlayer vs. Mplayer - behaviour after resuming a pause

Similar Messages

Maybe you are looking for