SMS_STATE_SYSTEM message ID 6104 and 6105 for single devices

My issue with this situation is different from what I have seen in other posts, so I'm not having any real luck correcting it. I get this in a onesy-twosy frequency where it is affects only one machine instead multiple. I go through all the same
processes, look at the statesys.log, etc., see what machine it is, look at the logs, but not getting anything really concrete. The error I get in the statesys.log actually points to a problem with the database.
sql message: spProcessStateReport - error: message processing encountered a sql error 201 at record 1 for topictype 0: "procedure or function 'spProcessRecord' expects parameter @UserType which was not supplied.", line 0 in procedure.
So I looked this up and found out that it means the usertype variable was expecting a default entry and there was none. I went to the database and the default is 0 (not null), so there actually is an entry, but I'm thinking it is seeing it as null.
I am not adept enough at sql to feel confident enough to change the value to 1, and quite frankly, if that was the big issue, then I would likely have this problem with many or most of the clients (we many thousand clients). So does anyone have any suggestions?
I realize it is the onesy-twosy occurance right now, but I would like to know how to correct it, especially if it potentially grows in number. Thanks for any help you can provide.

Hi,
I'm encountering the problem too.. exact same message
SQL MESSAGE: spProcessStateReport - Error: Message processing encountered a SQL error 201 at record 1 for TopicType 0: "Procedure or function 'spProcessRecord' expects parameter '@UserType', which was not supplied.", Line 0 in procedure "
However looking further did you see the Non Fatal error?
CMessageProcessor - Non-fatal error while processing RW9ICC0T.SMX
Thread "State Message Processing Thread #0" id:7764 was unable to process file "C:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\process\RW9ICC0T.SMX", moving to corrupt directory.
I assumed these are related?
System state is showing warning, messages are :- The State System message file processing processed one or more files that contained errors or invalid data. Review the statesys.log file for further details. The State System message file processing
could not process file 'RW9ICC0T.SMX' and moved it to the corrupt directory. Review the statesys.log file for further details.
Let see if i still the error tomorrow...

Similar Messages

Pros and Cons for single sales organization and multiple sales organization

Hi!
Does anybody have a good data of Pros and Cons for Single Sales Organization vs. Multiple Sales Organization.
Thank you!

Hi,
Actuall it all depends on the business process.
I will explain the answer to you through a practical example
like Ford, it has sales and services all across globe.
It is not advisable to manage all of its activities under only one sales organization, say Ford Inc.
So what it does is de-centralises the whole process according to the country, region so that the whole process is divided and hence can be managed more effeciently.
Hope this helps you in understanding the basics.
One sales org always provides you with very less data to update and maintain, while many sales org makes the scenario more complex.
One sales org always gives you the flexibility to bring any changes to the current scenario, while in multiple sales org to bring a change its a tiresome job.
These are some of the advantages and disadvantages of one to many sales org.
regards,
Siddharth.

Security Approach and Plan for single logon for Essbase and Reports.

Please any one can suggest me, how can I do the Security Approach and Plan for single logon for Essbase and Reports by using Maxl or Administrator.If any one have code,please forward to my email Id: [email protected]

Once you are logged in to the "Hyperion Portal" as you call it, your user credentials are automatically passed among all the components. Therefore, a lot of the logic you created to pass credentials between BQY files in a desktop environment are no longer needed.

"RUNSTATS and REORGCHK for single table" in DB13

Hello,
Our system is ECC 6.0, SAP_BASIS is SAPKB70011.
"RUNSTATS and REORGCHK for single table" in DB13, I found the parameter, "Parallel Jobs".
Why there is this parameter? Can we execute parallel runstats for single table in SAP environment?
Thank you very much and best regards,
Takae.

Hi Takae,
Although this DB13 job is named '.. for single table' it can process more than 1 table if you use wildcards. And only in this case parallelism makes sense, because the job cannot parallelize the runstats for one table but only parallelizes the runstats execution for different tables. Technically this is done be creating further background jobs in the SAP system.
Best regards
Ralf

HT4740 i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50

i already did the Hidding part and later moved the events and projects to the FCP events and projects folder . I still cannot share - keep getting this message "THE SHARE OPERATION 1080P FOR APPLE DEVICES (10 MBPS) HAS FAILED. Quicktime Error -50
I dont know what else to do to be able to share my project - I know i updated FCPX before i shared this project but i dont know what im doing wrong

masterpieces wrote:
later moved the events and projects to the FCP events and projects folder .
Can you explain in detail what you did?
Do any other shsre destinations complete? If not, do you get the same error message?

Message: No additional applications designed for your device were found

I'm trying to add a program onto my blackberry Pearl using Desktop manager & I get the message: No additional applications designed for your device were found. Help! Thanks in advance!
- Lola

Hi
I have the same problem with a 8310 on Vodaphone. I had a quick look on the link given but it didn't list my phone and doesn't appear to cover Vodaphone.
Do you know where I can find the software I need ?
Thanks
Thanks
Rog

I have multiple apple devices mainly used between me and my wife , my question is that can i have two sets of contacts backed up to icloud one for her devices and one for my devices using the same itunes account

i have two sets of devices one ipad, iphone and mac which i use and one iphone ipad and mac which my wife uses
now is it possible to have two sets of contacts and calendar synchronised for her devices and one for my devices using the same icloud account
i dont want a separate itunes account as we use the same music books and apps to be automatically downloaded which is very convenient
please guide

You can set up different iCloud accounts on each device using different Apple IDs (to keep your mail, calendars, contacts, etc. separated), and still share the same iTunes account (in Settings>Store on your device). There is no requirement that you use the same Apple ID for purchases and for iCloud.

TS4006 I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI but no

I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows the device but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI and i tried all the stuffs that has been written in the manual. Plese give me the Proper suggetion about this issue..!!

If your router is not identified in a national database (don't recall who maintains it or where it is) then there is no location associated with it. Hence your device cannot be located. I suggest you try your test at some public wifi spot, like a bookstore or coffee shop. These places usually have a location associated with their wifi router.

Creation of New DS and IS for single IO?

Hi guys,
I got a requirement wherein I should create a new IS and DS for a single IO, and the source for this is a flat file.
And I should create this for an already existing Info cube which has got some IO's and the source for that is from some other system.
Am on 3.5 version. So can anyone suggest me how to go about doing this task. In order to club this new data from the flat file to the info cube?.
Thanks in advance.
Regards
Dubbu

Hi,
Question 1 :
The Data for this single IO should be loaded from a CSV-file.
Answer : You cannot just load only one IO without attributes, so I suggest u maintain a counter for records as an attribute of this Single IO and then load it .
Question 2 :
Loading the same into Infocube .
Answer : Its not possible just with your flat file upload data ,
there are two ways of updating this , either you can update it with a routine basing on your requirement,
else you have to prepare a file again with the combination of the other characteristics and then upload the data into your infocube or if you are getting from source map it .
let me tell you that just loading single IO with a file will never help you in any ways to upload again in to Infocube .
Thanks,
VSK

Creation of new IS and DS for single IO?

Hi guys,
I got a requirement wherein I should create a new IS and DS for a single IO, and the source for this is a flat file.
And I should create this for an already existing Info cube which has got some IO's and the source for that is from some other system.
Am on 3.5 version. So can anyone suggest me how to go about doing this task. In order to club this new data from the flat file to the info cube?.
Thanks in advance.
Regards
Dubbu

Thx

Bpm:message being sent and wait for event

Hi,gurus:
My scenario is about BPM.In the integration process I used a loop and correlation.The scenario worked successfully yesterday,but after I changed some thing,it did not work.The outbound status of the message in sxi_monitor said "message being sent".And when I clicked PE to see the workflow log, it said " wait for event".
Thanks in advance.

Could you tell me how to reimport the integration progress in ID?
reimport means...delete the already imported BPM from ID.....this would affect the corresponding ID objects....save and activate....and then again run the import Integration Process wizard....create the objects once again.....seems time consuming.....hence mentioned it as the last option in the list:(
Also from SWWL delete only the instance with status as ERROR.
Edited by: abhishek salvi on May 20, 2009 9:30 AM

Message being sent and wait for event - BPM help.

Hi Experts,
I am doing BPM interface, in that i am receiving two files. Between these two files, i have set the coorelation in the BPM and included in the BPM's receive step1 and receive step2. After execution, when i look into the sxmb_moni, message status shows processed successfully, but when i look the Process engine status, it shows Message Being Sent and when i look into the BPM monitoring it shows message wait for event in the coorelation object.
I have gone through the following forum :
Link:[https://forums.sdn.sap.com/click.jspa?searchID=27600139&messageID=7561954]
but everything is green and messages are set to Message being sent status.
Experts kindly advise me.
Regards
Mani.

Hi Abhishek,
Here i have given my BPM design,
Start
Fork - two branches
Branch1 - Receive File1
Branch2 - Receive File2
Transformation
Send
End.
In coorelatin editor, i have specified container,involved messages and properties clearly.
I have gone through the SAP basis contents as per your previous reply.
One thing is, i have used the same design for my other interface, it is going through, but specifically for this interface i am getting error. If you could send me your mail, i will send you the exact screen shots, so that you can advise me.
Pls i need to complete this in a short period, kindly help me to come out.
Regards
Mani..
Edited by: mani_sg on Jun 18, 2009 10:21 AM

Material, service and warranty for single product

Hai all,
I have to do a scenario like this..
I have to sold a DG set to a customer and have to maintain service and warranty for the same..
Could any one help me how to do this.
Can we use COMMPR01 for this..
Thanks in advance,
S.Jenibalet

You cannot ship to an Apple store in another country - they will not
accept the shipment.
You must either take the iPhone personally to the country where the
warranty is valid or send it to a friend/relative in that country. After
repair/replacement, the friend will have to send the iPhone back to you.
All shipping and insurance costs are your responsibility.
Buy the iPhone where you intend to use it to avoid warranty problems.
Some features (especially 4G/LTE) might not work outside the country
the iPhone was meant for. KSA, UAE and some other countries block
FaceTime from the iPhone and FaceTime cannot be installed on those
iPhones even if used outside the restricted areas.

Textbook download error message: "Document is not licensed for this device type"

Hi everyone,
I bought a textbook that came with a free digital edition. I downloaded it, then tried to load it into Digital Editions (which I registered to my account). The texbook almost finished importing, then at the very end gave me an error message that said "[The name of the book]: Document is not licensed for this device type." The textbook is published by Aspen Law. I'm running Mac OS X 10.7.1 (Lion). Has anyone else had a similar issue or know of a resolution?
I've looked at other forum posts, and my situation seems remarkable like this one:
http://forums.adobe.com/message/3098928#3098928
I called the publishing company and tried to explain this to them, but they just said it was a problem with Adobe and Mac.
Thanks in advance,
Chris

OK - here's the issue.
When I downloaded Adobe Digital Editions I authorized my computer with my Adobe Account - apparently I wasn't supposed to do that. McGraw-Hill said that their file would ONLY work if the computer was not authorized with an Adobe Account (they should have said so after the order).
So after de-authorizing the account (ctrl+shift+d) I tried to open up the .acsm file again and I got a new error: e_lic_already_fulfilled_by_another_user. I'm afraid that the license was used up by Adobe Account, never mind that it actually never downloaded.
I guess the next step is to try and get another license issued?

LMS4, DFM, remove and re-add single device

A couple of times now I found that devices have gotten into DFM before the DNS was updated with the device name. A simple rediscover of the device does not pick up the device DNS name in DFM (in LMS it does ofcourse).
Also somethimes devices are stuck in learing or move to questioned without ever really trying to rediscover.
In LMS 3.2 it was possible to remove such single devices from DFM and to bring them back from the DCR later on. (no impact on configurations, map, groups, etc)
Is there a way in LMS4 to do this? A CLI method is what I'm looking for as I can see it is no longer possible in the GUI.
I'm aware I can turn of and on faultmanagement but I that is quite impacting where you have several hundred devices
Cheers,
Michel.

Hi Joe,
Is there any update on bringing back the ability to remove devices from DFM in LMS 4.2.2?
The scenario I have is there are a couple of devices that do not exist in DCR but are in DFM. My install of DFM has had some issues until recently and I deleted these devices some time ago from DCR but they were never removed from DFM. I now have DCR and DFM syncing ok but these are the remnants that need to be removed
Your above solution can't work in this case because the devices are already unmanaged and deleted.
Thanks,
Mark

SMS_STATE_SYSTEM message ID 6104 and 6105 for single devices

Similar Messages

Maybe you are looking for