SMSEXEC.exe crash

The sms_executive service starts and crashes shortly after. The below message appears in the event logs.
Faulting application name: smsexec.exe, version: 5.0.7958.1000, time stamp: 0x5230e560
Faulting module name: baseobj.dll, version: 5.0.7958.1000, time stamp: 0x5230e4fe
Exception code: 0xc0000005
Fault offset: 0x00000000000e647e
Faulting process id: 0x%9
Faulting application start time: 0x%10
Faulting application path: %11
Faulting module path: %12
Report Id: %13
Faulting package full name: %14
Faulting package-relative application ID: %15
Shortly after this message appears there is a .net error as below.
Application: smsexec.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: exception code c0000005, exception address 000000005114647E
I've also checked out the crash dump and get the following error.
This dump file has an exception of interest stored in it.
The stored exception information can be accessed via .ecxr.
(10bc.22f4): Access violation - code c0000005 (first/second chance not available)
ntdll!NtWaitForSingleObject+0xa:
00007ff8`850865ba c3 ret
0:105> excr
Couldn't resolve error at 'xcr'
I'm really at a loss to explain what is going on here after hours spent searching I'm unable find any knowledge base articles that are for similar issues. Any help would be appreciated.

Hi,
Have you seen this thread.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/2f4a56d8-cf2a-4535-bf68-1c88aa7954ff/smsexecutive-crash-after-sccm-sp2-r2-upgrade?forum=configmgrgeneral
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

8i EE Setup.exe crash - XP Pro and AMD X2 CPU

When trying to install 8i on my XP Pro (SP2) box with and AMD X2 3800+, setup.exe crashes as soon as it is run. I've tried the fix for P4s (renaming the symcjit.dll instances), but to no avail. This happens wherever the setup.exe is run from.
Has anyone encountered this problem and managed to fix it?

Hope you realize that Microsoft has changed a number of the kernel APIs with XP. Oracle8i was written to older APIs and you may experience crashes, possibly at random, simply because you are trying to run things in an incompatible way.
(I see this as a bit like buying a new car chassis and putting in an old engine and transmission - there is a lot of tinkering required to get the motor mounts to match.)
In my experience, people who have made 8i work on XP Pro have generally upgraded XP from an older OS and have been lucky enough to have the old APIs still lying around.
Suggest you try moving up to a newer version of Oracle and, if necessary, use the compatibility parameter to keep compatibility.

Windows Server 2012 R2 RDS + User profile Disks + App-V = Explorer.exe crashing all of the time

I have built a new RDS farm on Windows Server 2012 R2 with two Session Hosts and a combined Connect Broker/Web Access server. I had the farm up and running with User Profile Disks and all seemed OK. However, as soon as I installed the App-V 5.0 SP2 RDS
client on the session hosts, the explorer.exe process started crashing for any user logging in via the Web Access site. The process crashes and restarts every five to ten seconds. It's the same for administrators. If they log in via Web Access explorer.exe
crashes, but if they RDP directly to one of the session hosts explorer.exe is fine. If I reboot the session hosts, then the first user to log in via Web Access has a stable desktop session (and appears to have a new profile as well). However, if that user
logs out and back in again, explorer.exe starts crashing again. The only applications I have packaged at the moment are Office 2013 and Firefox.
I tried disabling User Profile Disks, but this caused a whole bunch of other problems and I eventually lost the ability to log in at all via Web Access (errors about the user profile service). As this is a small pre-production environment I completed scrapped
all of the servers and rebuilt from scratch. Again, everything appeared fine until I installed the App-V client, then explorer.exe started crashing repeatedly for all users.
Has anyone come across this issue before? I have tried installing the App-V 5.0 SP2 Hotfix Package 2, but this didn't help. I have read in a few forums that App-V doesn't work very well with User Profile Desks, but I have not heard of this particular issue.
Similarly, SP2 seems to have a lot of problems, so I am going to try removing App-V RDp Client SP2 and installing SP1. I ahev also deleted User Profile Disks for the test users to recreate their profiles, but this didn't help either.
Any other suggestions welcome!

I forgot to include the application event log entry for explorer.exe crashing:
Faulting application name: explorer.exe, version: 6.3.9600.17039, time stamp: 0x53156588
Faulting module name: KERNELBASE.dll, version: 6.3.9600.17055, time stamp: 0x532954fb
Exception code: 0xc06d007e
Fault offset: 0x0000000000005bf8
Faulting process id: 0xae8
Faulting application start time: 0x01cfab3a273787fd
Faulting application path: C:\Windows\explorer.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: 69210d77-172d-11e4-80c6-0050560102d1
Faulting package full name:

Sapinst.exe crashes on Windows 7 (ver. 6.1)

Hi,
I am trying to install Netweaver CE 7.11 on Windows 7 64-bit. Yes, I know it is not supported. But still, I would like to ask right about the reason sapinst.exe crashes.
So, sapinst.exe can be launched in Win 7 native mode, but it is not compliant with OS compatibility. So I am trying to launch it in Vista mode. But sapinst.exe crashes with error log like this (sorry for flood, but see below).
At the same time sapinst.exe launches in Win 7 native mode + 32-bit sapinst.exe launches in Vista mode. Only 64-bit sapinst crashes in Vista mode. I suspect this is related just to JVM and near that, and may be solved. Please, advise, if someone has more expertise than me or experience with such or similar situations.
Thank you.
Regards,
Anton
An unexpected error has been detected by SAP Java Virtual Machine:
EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x0000000076def2d5, pid=2852, tid=1484
Java VM: SAP Java 64-Bit Server VM (5.1.000 Feb 13 2007 23:26:13 - 01_REL - optU - bas2:69696 (mixed mode))
Problematic frame:
C ntdll::RtlCaptureContext+0x85 (0x4f2d5)
T H R E A D -
Current thread (0x0000000000a4f3c0): JavaThread "main" [_thread_in_Java, id=1484]
siginfo: ExceptionCode=0xc0000005, reading address 0xffffffffffffffff
P R O C E S S -
Java Threads: ( => current thread )
0x00000000202dc930 JavaThread "HttpServer" [_thread_in_native, id=4028]
0x00000000202dc580 JavaThread "HttpWorker" [_thread_blocked, id=3948]
0x00000000202dc1d0 JavaThread "HttpWorker" [_thread_blocked, id=6148]
0x00000000202dba70 JavaThread "HttpWorker" [_thread_blocked, id=2116]
0x00000000202ddf50 JavaThread "AlarmClock" [_thread_blocked, id=1000]
0x00000000202db310 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=7144]
0x0000000020143230 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=5636]
0x000000001f37f8c0 JavaThread "Image Fetcher 0" daemon [_thread_blocked, id=6060]
0x000000001f37f1b0 JavaThread "AWT-Windows" daemon [_thread_in_native, id=316]
0x0000000020010bc0 JavaThread "AWT-Shutdown" [_thread_blocked, id=1020]
0x000000001f027180 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=5528]
0x000000001f026880 JavaThread "CompilerThread1" daemon [_thread_blocked, id=5116]
0x000000001f01fa70 JavaThread "CompilerThread0" daemon [_thread_blocked, id=5336]
0x000000001f01f060 JavaThread "AdapterThread" daemon [_thread_blocked, id=6240]
0x000000001f01e2f0 JavaThread "Control Handler" daemon [_thread_blocked, id=6532]
0x000000001f01da00 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=6072]
0x000000001f018af0 JavaThread "JDWP Event Helper Thread" daemon [_thread_blocked, id=6636]
0x000000001f014d10 JavaThread "JDWP Transport Listener: dt_socket" daemon [_thread_blocked, id=4964]
0x000000001e805070 JavaThread "Finalizer" daemon [_thread_blocked, id=2964]
0x000000001e8030f0 JavaThread "Reference Handler" daemon [_thread_blocked, id=324]
=>0x0000000000a4f3c0 JavaThread "main" [_thread_in_Java, id=1484]
VM Arguments:
jvm_args: -Xmx256M -Dsun.java2d.noddraw=true -Dsap.env.var.javahome=SAPINST_JRE_HOME -agentlib:jdwp=transport=dt_socket,server=y,address=8000-8100,suspend=n
classpath: C:\Users\user1\AppData\Local\Temp\sapinst_exe.5632.1284041309\jar\instgui.jar
java_command: SDTGui instwizard host=localhost port=21201 -nolock
Launcher Type: SAP_STANDARD
Environment Variables:
PATH=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files\ThinkPad\Bluetooth Software\;C:\Program Files\ThinkPad\Bluetooth Software\syswow64;
USERNAME=user1
OS=Windows_NT
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 37 Stepping 2, GenuineIntel
current directory: C:\Users\user1\Desktop\CE711_01_IM_WIN_X86_64_ADA
S Y S T E M -
OS: Windows Vista Build 6000
CPU:total 4 em64t ht
Memory: 4k page, physical 4050608k(1810264k free), swap 8406516k(5986780k free)
vm_info: SAP Java 64-Bit Server VM (5.1.000) for windows-amd64, built on Feb 13 2007 23:26:13 by unknown with MS VC++ 8.0
hostname: IEVN60202577A

Also, I noticed that possibly JVM crashes in ntdll.dll. Here are some libs, from the errorlog:
0x0000000000400000 - 0x0000000000415000      C:\Users\i057882\AppData\Local\Temp\sapinst_exe.5528.1284043695\jre\bin\java.exe
0x0000000076da0000 - 0x0000000076f4b000      C:\Windows\SYSTEM32\ntdll.dll
0x0000000076c80000 - 0x0000000076d9f000      C:\Windows\system32\kernel32.dll
0x000007fefcdb0000 - 0x000007fefce1b000      C:\Windows\system32\KERNELBASE.dll
0x000007fefecb0000 - 0x000007fefed8b000      C:\Windows\system32\ADVAPI32.dll
0x000007fefe980000 - 0x000007fefea1f000      C:\Windows\system32\msvcrt.dll
Exception always occurs here: EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc= 0x0000000076def2d5
So I assume ntdll.dll is the place where crash happens. Am I right? And what could it mean?
Thanks.
Anton
Edited by: Anton Shabinskyi on Sep 9, 2010 5:59 PM

File Explorer (explorer.exe) Crashes in Windows 8.1 at shutdown

Hi,
Iv been running a custom built PC with Windows 8.1 (Win7 upgrade to Win8 then 8.1) Now since a couple of weeks after Win8.1, which was running perfectly fine up until last month when I Started to get these Explorer.exe crashes, Im quite knowledge able
with PC so iv done various things such as System Restore (as far back a could) and also followed all the guides on using the Registry editor to disable the Shell Extensions, in addition iv also used Registry Recycler but all to no avail. I then saw this support.microsoft.com/kb/2929203
and decided to use the charms bar to shut down but it still made no difference at all.
I don't really want to preform a refresh because i have so many Desktop Programs installed and i have only had this issue since around Mid way through last month, each time on shut down the instructions (referenced memory) are different but all structured
like: "The instruction at 0x referenced memory at 0x. The memory could not be read. Please if you could help me find a solution to solve this problem with
out preforming a refresh, I know this could be a a program but event viewer tells me nothing so I would greatly appreciate any help.
My System Specs are as follows:
MB: Asus Sabertooth FX R2
CPU: FX6300
GPU: GTX660
RAM: 8GB DDR3 1600
OS: Windows 8.1 Pro 64bit With Latest Updates
If you require any other info just ask :-)

Another Update after changing some options in Event Viewer I get this two logs from each crash at shutdown:
The process C:\WINDOWS\Explorer.EXE (DESKTOP) has initiated the power off of computer DESKTOP on behalf of user Desktop\Calum for the following reason: Other (Unplanned)
Reason Code: 0x0
Shut-down Type: power off
Comment:
Followed by:
Application pop-up: explorer.exe - Application Error : The instruction at 0xffffffff referenced memory at 0xffffffff. The memory could not be written.
Click on OK to terminate the program
EDIT: I also got the time of the first reported error: 02/02/2014 04:50:26

Mstsc.exe crashes after connecting to server 2008

Hi at all
We got a Problem with a Windows 8.1 Client, if we connect to a windows server 2008, mstsc.exe crashes:
Name der fehlerhaften Anwendung:
mstsc.exe, Version: 6.3.9600.16384, Zeitstempel: 0x5215e2b5
Name des fehlerhaften Moduls:
DUI70.dll, Version: 6.3.9600.17031, Zeitstempel: 0x53086a1c
Ausnahmecode: 0xc0000005
Fehleroffset: 0x000000000000277d
ID des fehlerhaften Prozesses: 0x238
Startzeit der fehlerhaften Anwendung: 0x01cfe2341b86ceba
Pfad der fehlerhaften Anwendung: C:\Windows\system32\mstsc.exe
Pfad des fehlerhaften Moduls: C:\Windows\system32\DUI70.dll
Berichtskennung: 5a1aa523-4e27-11e4-8267-2c4138a7d63a
Vollständiger Name des fehlerhaften Pakets:
Connecting to a MS Server 2003 works fine, the problem only occured while connecting a MS Server 2008
I also created a dmp-file mstsc.dmp but i cannot open it for some reason :(
(can anyone tell me which settings i have to apply to open it with windbg? i inserted SRV*C:\Windows\symbol_cache*http://msdl.microsoft.com/download/symbols @ "Symbol File Path" any other parameters missing? [first time using windbg ;)])
We already tried to resolve the problem with other measures like reinstall graphics driver, deactivate sound & printer mapping in the mstsc-options, deactivate the grpahiccard etc..
Thanks for your help!

Hi,
According to your description, we could try to fix that user profile for test:
Create a new user account and transfer the profile data.
Please follow the steps below to do that:
1. Open the Windows Explorer.
2. Click on View tab and Click on Options at the top right corner.
3. Click the View tab, and then click Show hidden files, folders, and drives.
4. Uncheck the box which states Hide protected operating system files.
5. Click Yes to confirm, and then click OK.
6. Locate the C:\Users\Old_Username folder, where C is the drive that Windows is installed on, and Old Username is the name of the profile you want to copy files from.
7. Select all of the files and folders in this folder, except the following files:
•Ntuser.dat
•Ntuser.dat.log
•Ntuser.ini
8. Right click and Select Copy.
9. Locate the C:\Users\New_Username folder, where C is the drive that Windows is installed on, and New Username is the name of the new user profile you created.
10. Right click inside the folder and select Paste.
11. Restart your PC and check if you are able to log in to default profile.
Karen Hu
TechNet Community Support

HT5925 AppleIEDAV.exe crashes everytime Windows 7 64 bit opens

AppleIEDAV.exe crashes everytime Windows 7 64 bit opens. Any ideas?
Problem signature:
Problem Event Name: APPCRASH
Application Name: AppleIEDAV.exe
Application Version: 1.2.12.0
Application Timestamp: 52867716
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.18247
Fault Module Timestamp: 521ea8e7
Exception Code: c0000005
Exception Offset: 0002e41b
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
This just started to happen. I'm using IE 11. Of course.. Safari is dead.
Thank you!

Remove or uncheck Bookmarks in your iCloud control panel. That is what is causing most of the problems. At least that is what I've been able to gleen from reading other posts here in the forum.

Servicelayer.exe crashes when backing up

Hi there guys,
I am currently having a problem with PC Suite where the servicelayer.exe crashes when doing a phone backup.
OS: Windows Vista
PC Suite: 6.82.22.0
Phone: N80
Whenever I try to do a phone backup it gets to 50% the servicelayer.exe crashes and PC Suite re-initiates a connection to the phone. This problem does not happen when I do a memory card backup. I have also noticed that this happens on either the cable connection or bluetooth.
If anyone has any idea what could be causing this problem please help ... I think that maybe I need to wait for a version is more compatible with VISTA!

I'm not sure this is isolated to Vista as I'm having similar problems on both Win 2000 and XP. Was going to start a new topic about my issue when I saw this post. So I'll put the detail here.
OS: Windows 2000 and XP
PC Suite: 6.92.22.0
Phone: 6233
Whenever I attempt to do a backup of the phone only (or phone and card) it gets to 80% before the connection drops out as described above.
Have tried 2 different PCs (1 Win2000, 1 WinXP) and clean installs of PC Suite but the problem is consistent across both machines. I am using a CA-53 cable.
Was going to experiment a little more by trying my 6230 to see if the problem was specific to the 6233, haven't tried just a card backup (as I didn't really need this) but will have a go to confirm whether this works as per the original post and to try and isolate the problem. Might also rollback the PC Suite install to an older version to see if the problem persists.

Ifweb60.exe crash when using file upload utility

Hello,
I have implemented the file upload utility in my own forms. When using the file upload for the first time in my forms session everything works fine. But when i try to start it again (within the same forms session) i get an ifweb60.exe crash on the server and a FRM-92101 error on the forms client
Did anybody have the same problem before and how can i solve this?
I am using iAS9i (release 1.0.2.1.0) with forms patch 10 (Jinitiator 1.3.1.9), Oracle server 8.1.7 on Windows NT 4.
I included the output of my java console
Thanks,
Gerton
Oracle JInitiator: Version 1.3.1.9
Using JRE version 1.3.1.9 Java HotSpot(TM) Client VM
User home directory = C:\WINNT\Profiles\382
Proxy Configuration: Manual Configuration
Proxy: MyProxy
Proxy Overrides: <local>
JAR cache enabled
Location: C:\WINNT\Profiles\382\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
Loading http://80nte/forms60java/f60all_jinit.jar from JAR cache
Loading http://80nte/forms60java/UploadClient.jar.sig from JAR cache
Loading http://80nte/forms60java/ctb_icons.jar from JAR cache
connectMode=HTTP, native.
Forms Applet version is : 60819
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Onbekende setProperty...
Start setProperty
Start setProperty
Start setProperty
Start setProperty
Opening connection to http://80nte:80/download/907.doc...
Copying resource (type: application/msword, modified on: Mon Aug 05 11:45:58 CEST 2002)...
35840 byte(s) copied...
Start setProperty
Onbekende setProperty...
Start setProperty
Start setProperty
Start setProperty
Start setProperty
Client OS is Windows NT
start RunCMD...: cmd.exe /C C:\TEMP\907.doc
Opening Word document...
Document has been released C:\TEMP\907.doc
FileUploader: LoadFile : Named File
FileUploader: 907.doc
FileUploader: Dir>C:\TEMP\
FileUploader: Named File = C:\TEMP\907.doc exists
FileUploader: <PERFORM UPLOAD>
FileUploader: Filesize 35840
FileUploader: Source file size before encoding 35840 Bytes; (Compressed to 8905 Bytes)
FileUploader: Size of encoded byte array : 12190 (3 Chunks)
FileUploader: numchunks is 2
FileUploader: Chunking : 0:4096
FileUploader: Dispatch Chunk 1
FileUploader: Chunking : 4096:8192
FileUploader: Dispatch Chunk 2
FileUploader: Chunking : 8192:12190
FileUploader: Dispatch Chunk 3
FileUploader: </PERFORM UPLOAD>
Start setProperty
Start setProperty
Start setProperty
Start setProperty
Opening connection to http://80nte:80/download/907.doc...
Copying resource (type: application/msword, modified on: Mon Aug 05 11:46:41 CEST 2002)...
35840 byte(s) copied...
Start setProperty
Onbekende setProperty...
Start setProperty
Start setProperty
Start setProperty
Start setProperty
Client OS is Windows NT
start RunCMD...: cmd.exe /C C:\TEMP\907.doc
Opening Word document...
Opening Word document...
Document has been released C:\TEMP\907.doc
FileUploader: LoadFile : Named File
FileUploader: 907.doc
FileUploader: Dir>C:\TEMP\
FileUploader: Named File = C:\TEMP\907.doc exists
FileUploader: <PERFORM UPLOAD>
FileUploader: Filesize 35840
FileUploader: Source file size before encoding 35840 Bytes; (Compressed to 8917 Bytes)
FileUploader: Size of encoded byte array : 12206 (3 Chunks)
FileUploader: numchunks is 2
FileUploader: Chunking : 0:4096
FileUploader: Dispatch Chunk 1
FileUploader: Chunking : 4096:8192
FileUploader: Dispatch Chunk 2
FileUploader: Chunking : 8192:12206
FileUploader: Dispatch Chunk 3
FileUploader: </PERFORM UPLOAD>
oracle.forms.net.ConnectionException: Forms session <7> aborted: unable to communicate with runtime process.
     at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
     at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
     at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
     at oracle.forms.net.HTTPNStream.flush(Unknown Source)
     at java.io.DataOutputStream.flush(Unknown Source)
     at oracle.forms.net.StreamMessageWriter.run(Unknown Source)

Problem is solved!

SMSEXEC.EXE event ID1000 faulting module ntdll.dll

Hi,
I have a SCCM 2007 server which stops on a regular basis with the following entries in the event viewer, has anyone seen this before??I know there are some hotfixes available for issue's like this but I cannot find one that matches the exception code of
0xc0000374.Any ideas??
Faulting application name: smsexec.exe, version: 4.0.6487.2000, time stamp: 0x4ab33f1d
Faulting module name: ntdll.dll, version: 6.1.7600.16915, time stamp: 0x4ec49d10
Exception code: 0xc0000374
Fault offset: 0x000ce903
Faulting process id: 0x3a24
Faulting application start time: 0x01cf46268f4589c9
Faulting application path: d:\Program Files (x86)\Microsoft Configuration Manager\bin\i386\smsexec.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 8b89c4be-b386-11e3-861f-00215aec4c76
many thanks

Yeah, that's part of the problem with having so many :-(
Do you have any installed already?
When I was still working on 2007 (it's been a few years since I've seen a production 2007 site that I haven't migrated off of and thus didn't care about health-wise explicitly), I had a list of updates I always installed. I don't remember and can't find
which ones these were though. You may be able to search the forums and find a list from someone (or me) as this did come a few times in the lifetime of 2007 SP2.
Jason | http://blog.configmgrftw.com

Internet explorer 11 cause explorer.exe crashes

Hi There,
Just to let you know a little tips that can help for other about IE11 and explorer crashes fix
I don't know where posting that, so it will be here ! :)
Yesterday i decided to install Internet explorer 11 on my freshly installed Windows 7 Pro ed.
No problems during install, but after the reboot, my computer went on a strange state:
- Explorer keeps crashes itself everytime i launched a tool from the run command, or simply when i wanted to launch an explorer or other.
- Some services couldn't start (svchost, dhcp client, search, wmi etc ...)
- No launched programs in the taskbar.
- Security essentials failed to launch
- Funny thing : i could type only 4 letters into the run command, impossible to launch anythink except (hopefully) a CMD prompt :D
so after breaking my head on my desk, i decided to try something :
on a CMD i ran a SFC /scannow and it repaired some errors, not all.
I parsed the CBS.LOG file, and realized that one DLL failed to repair on the generated txt (see details below) :
this dll was : IEPROXY.DLL and i made the link between my IE11 installation and this dll.
==> method to parse the CBS.LOG file : launch CMD as admin and type the following:
findstr /C:"[SR] Cannot repair member file" %windir%\logs\cbs\cbs.log >sfcdetails.txt
so here is the fix/workaround : simply uninstall IE11!
But ... wait, you cannot access to APPWIZ.CPL (remember: impossible to laucn the control panel without crashing explorer) so we will uninstall IE11 with a command line:
on the CMD type this :
FORFILES /P %WINDIR%\servicing\Packages /M Microsoft-Windows-InternetExplorer-*11.*.mum /c "cmd /c echo Uninstalling package @fname && start /w pkgmgr /up:@fname /quiet /norestart"
when it's ok, simply restart the computer, IE10 will be available automatically and the issue disapeared.
Hope it helps someone.
David

Hi,
Thanks for sharing your experience to us.
For the persons who have the similar issue with the explorer.exe crashes, try this solution to fix the issue.
If you have any questions or concerns, please do not hesitate to let us know.
Thanks again. Have a nice day.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Explorer.exe crashing when opening directory with FLV files in them

Hi,
In the past few days for no reason at all, every time I open
a folder containing FLV files, I get an error with Explorer.exe
crashing. I don't even touch a file, just opening the folder
containing them causes it.
Has anyone else experienced this issue. It getting a bit
annoying now.
All of my FLV files are created with Premier Pro CS3, and
until recently I haven't seen any issues.
Even if I use Remote Desktop into my Windows 2003 Web Server
to view the folder on Flash Media Server, my local computer drops
Explorer.exe.
cheers

it's probably because you have .flv registered as a video
file, and the explorer tries to create a video-thumbnail. (have you
installed any funky FLV video players/ or maybe a codec pack?)
If you can, try navigate to the folder in "details" view
mode..that should be fine, because details view, does not show
thumbnails.
Then try to click on one of the FLV files.. you'll see the
preview pane..and eplorer will crash.
i'm not sure how to fix this, but somehow, you should remove
.flv from the filetypes that windows conciders a video file.

CcmExec.exe Crashing

CcmExec.exe Crashing in SCCM Client.Getting below error in event viewer
The client machine is Windows 2008 r2 64 bit,I have tried reinstalling the client and exclude the CCMEXEC.Exe and ccm folder from antivius realtime scan.We are using Symmentic endpoint protection
Faulting application name: CcmExec.exe, version: 4.0.6487.2000, time stamp: 0x4ab33e4d
Faulting module name: ntdll.dll, version: 6.1.7600.16695, time stamp: 0x4cc7ab86
Exception code: 0xc0000005
Fault offset: 0x0009cec4
Faulting process id: 0xc7c
Faulting application start time: 0x01ccce736dc99116
Faulting application path: C:\Windows\SysWOW64\CCM\CcmExec.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 1c1e0074-3a6f-11e1-9191-005056a06bfc"

I am seeing the same issue. Event Details;
Faulting application name: CcmExec.exe, version: 4.0.6487.2000, time stamp: 0x4ab33e4d
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
Exception code: 0xc0000005
Fault offset: 0x0009ce74
Faulting process id: 0x277c
Faulting application start time: 0x01cf23a0b3173bc5
Faulting application path: C:\Windows\SysWOW64\CCM\CcmExec.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 6621d45d-8f9c-11e3-9933-e83935befa00
Trying the rename of the file, like Moiz did. Lets wait 24 hours and see. JB
JB [email protected]

(VS 2010 C++) cl.exe crashes when a lot of include paths are passed with /Zi, looking for workarounds

Hello
If i pass a lot of include paths to cl.exe that comes with Visual Studio 2010, and i also pass /Zi, cl.exe crashes (16.00.40219.01). Here's an attachment to reproduce the issue: http://www.filedropper.com/clexecrash
Extract the folder to your system drive root (C:\), and paste the contents of command.txt into a cmd.exe instance. cl.exe will crash.
test.cmd is a command file containing the line "/IREALLY_LONG_BOGUS_INCLUDE_PATH" 683 times, and /Zi. Please note, that if you either remove even one line of "/IREALLY_LONG_BOGUS_INCLUDE_PATH" or /Zi, the issue goes away. Without /Zi, there
seems to be no limitation of include paths. Please also note, that it's not the sheer number of /I switches that causes this crash, if you replace REALLY_LONG_BOGUS_INCLUDE_PATH with something longer, you can crash cl.exe with less /I switches.
This issue is also present in Visual Studio 2012 (17.00.61030), but seems to be fixed in 2015 CTP 5 (i don't have access to Visual Studio 2013, so i can't try). I know Visual Studio 2010 is not supported anymore, so does anyone know a workaround for this problem?
Thanks in advance,
Peter

I cannot reproduce this issue with VS2013, your sample works well and generate a pdb file.
It seems a issue in VS 2012, but sorry about that I have no workaround for this. Please check this thread: this issue only appear in debug mode.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/018ef85a-f172-4278-8215-30ad2a8accc2/clexe-crashes-using-large-number-of-include-directories?forum=vcgeneral
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

PProHeadless.exe crash - still can't render anything with PPro CS4

I ran into this problem back when I did the CS4 upgrade and wound up sticking with PPro CS3 because I could never get the CS4 AME to run under Vista 64-bit. I recently did an upgrade to Windows 7 64-bit and was hoping that I could finally use PPro CS4. Alas, I cannot. Same problem.
I've searched the forum and the web and found lots of recommendations but my AME crashes within seconds of loading - I don't even have a chance to change number of processers and the files I'm trying to render don't matter (I've tried all sorts of source files). Basically, I export the timeline from PPro CS4, the AME splash screen appears, then I get the "PPROHeadless.exe" crash within a couple seconds. So I never actually start the render - it doesn't get that far.
Has anyone found any fixes other than changing number of processors and mods to the source material? Neither of those works for me.
Thanks,
rgames

OK.
Under these circumstances, I'd say that something common to both installations is causing the crash, some piece of software that was on both.
Is this a dedicated production rig, or is the machine used for other purposes?

SMSEXEC.exe crash

Similar Messages

Maybe you are looking for