Mapping Identical Source GL Account to Idential Target Essbase Account

Is there a way to use a rules to map a source GL account to a target essbase account that are both identical? If so, can someone please provide some guildence. I tried looking at the fdm admin guide, but have not come up to a solution.
Thanks,
Trung

You can use a wildcard map of * to *

Similar Messages

How do I map the source file name to a target table?

I am mapping a source fixed length flat file to oracle target tables. One of the tables is a parent transaction table that stores the date, record number, status, etc. and the file name of the source flat file. The file name will change daily because the date is part of the naming convention. Is there an easy way to determine the source file name and map it?
One option a co-worker is working on is writing a pre-mapping stored procedure. It would insert the file name into a table prior to the mapping. But I was hoping for a cleaner solution.
Thanks!

Hi
Use extarnel table to load the data from the file into the table.
Create a procedure which changes the external table definition as the filename chnages.
Use this proceudre in the mapping as a premapping process.
Ott Karesz
http://www.trendo-kft.hu

Mapping 2 source structures to a single target database

Hi Experts, My scenario is a Proxy to JDBC in which I need to send data from 2 source structures to 1 target table.
Source structures :                                           Target:
ABC                                                                 XYZ
row1                                                                 InsertStatement
    Item1                                                                  DBTable
                                                                    Action
   (Fields)                                                     Table
                                                                                acess
DEF                                                                              -
row2                                                                          -
   item2                                                                         -
(Fields)
(Fields)
Please let me know how to map the 2 source nodes to the target access node to transfer data from the source tables to target database.
Regards,
Krishna

You should make use of BPM to collect the two source structures.
One of the BPM examples mentioned in IR --> SAP BASIS ---> SystemPatterns can be referred for this purpose.
Once the messages are collected, perform a 2:1 mapping (two Proxies as source message and one JDBC message as target).
If you want the mapping logic then please provide a proper format of both your Source and Target messages and the expected mapping, so that someone from SDN can help you out.
The target structure provided is a bit confusing.
Are you going to receive two different proxy messages (i.e. two different calls) or just one Proxy call and there you will have two different nodes within the same message??? ...... me confused
Regards,
Abhishek.
Edited by: abhishek salvi on Sep 25, 2009 11:51 AM

Mapping from source in same DB as target

We are running a warehouse where part of the data is pumped into a holding schema in the same database as the target schema resides.
Using OWB3 we set the "schema property" of all objects in the mappings referring to the holding schema and generated the loads. This worked just fine.
Now I am looking at upgrading to OWB92 but it seems the "schema property" is obsolete. Does that mean I HAVE to create a database link to the holding schema in the target schema using locations and connectors, or is there another way of directly referecing the holding schema in the mappings that load data from holding to target ?

Nikolai -
I just tried this as well. I went from source to staging area which is setup as a target schema. That worked fine.
Then I tried to map from the staging target schema to another target schema on the same instance.
The deployment correctly prefixed with the schema name rather than the database link, but my problem now is that it doesn't appear that the 2nd target schema has permissions to select from the table in the first target schema.
Can this be fixed somewhere in configuration or do I have to manually grant select on any tables in this situation?
Thanks,
Dave

Mapping for source node 1 to unbounded & target as 0 to 1

Hi
my source is
attribute   1---unbounded
       name    ....ABC
        value   ....123
attribute
      name -
XYZ
      value -
345
attribute
       name --- NYM
       value --- 678
My requirement is as follows...
If name is XYZ , then pass the value 345 to target node(0...1).
But the mapping is checking value only of the first node and the mapping fails...
Please suggest
Regards
Abhijit

Abhijit,
Mapping can not fail if the occurence of Target field is 0...1 unless you have some UDF/ Standard function which are throwing exception due to the input they are getting.
Use IfWithoutElse and set the property SUPPRESS as false.
Change the context of source node to the top level.
Thanks,
Sunil Singh

Map one source elements to two different target elements

Hi Gurus,
 In our scenario, we have single source. and we are mapping this single source to two different structures, based on condition in the source records on one field, we are mapping to either X structure or Y structure. in my case i have to generate only one file at a time based on condition.
 If condition is true, i have to mapp it for X structure, if its false i have to mapp it for Y structure. but in my case i getting a blank file for another mapping. i should stop this blank file.
 any suggestions and solutions will be rewarded. this is an urgent issue, please help me.
 Thanks in advance....
Thanks & Regards,
Anuj..

I have already used an if-then construct and an enhanced ID.Thanks anyway.
Let me explain using a source interface (s1) and target interfaces t1 and t2.
Based on the condition, only one interface(lets say t1) will be selected, target mapping is done for this.
But the problem is that the other interface (t2) also executes(having only the root node) and the end result is i have two files - one with the mapped payload and another empty one with only the root node.
My requirement is to remove this empty file at the mapping stage itself , as -
1) i only need a single file at the receiver.
2) i do not want an extra payload for every record i send, creating unnecessary load on my IE.
Also due to performance issues i do not want to move this to a BPM.
I have attached the o/p screenshot at http://www.flickr.com/photos/14210232@N03/1550768802/
In window 1 i have the correct output .i.e of the interface t1 which was mapped.
In window 2 i have the unwanted output. i.e the interface t2 which is creating another file at the receiver.
Ques: When using enhanced ID/multi-mapping, under Messages tab, if i set my target message type to 0..1, should it not work? I have tried this but it doesn't.
Do let me know a way out! Thanks.
Anuj.

Message mapping---1 source structure and n target structures

I would like to know how many message mappings we need if we are mapping one source structure to 3 different target structures of a single receiver. I am assuming its just one message mapping.
Depending on the above answer how many interface mappings do we need.

Kalyan,
you need multi-mapping that maps one source structure to multiple target structures. Just search multi mapping in SDN and you will find many good posts.
Basically, in MM editor, go to signature tab and in the target messages add additional message types. Simple. --> Only one MM and one IM
Jayson

Message mapping - Map 2 source contexts into one target context

Hi,
I have an issue as follows:
Source context 1 (defined as 1.....unbounded)
Source context 2 (defined as 1.....unbounded)
Target context 1 (defined as 1.....unbounded)
I need to map both source contexts into the single target contexts.
For example....
Source context 1 has 3 entries
Source context 2 has 2 entries
Target context would have 5 entries in total (Source context 1 and Source context 2)
I have only limited knowledge of working with multiple contexts so need a bit of advice.
Can someone provide an easy way to do this ? I'm sure there is.
Cheers
Colin.

The answer is quite simple.
Right-click on the target node in the mapping editor and select the option "duplicate subtree".
You will then have two destination nodes.
Now you can map source1 to target1 and source2 to target2

Idoc to jdbc mapping duplicate source node to target structure

Dear all,
I am working on PI 7.1
My sceniro
IDOC to JDBC [sap to mssql ] where the target is a table structure shown below: I execute a stored procedure to insert the below message type into sql table.
<ns0:MT_SP_LFBK xmlns:ns0="http://test.com">
- <Statement_Name>
- <storedProcedureName action="EXECUTE">
<table>spr_test</table>
<BANKS type="Char">BOA</BANKS>
<BANKL type="char">122207</BANKL>
<BANKN type="char">4555--0</BANKN>
<LIFNR type="char">1100000218</LIFNR>
<KOINH type="char">varchar</KOINH>
<BKONT type="char">01</BKONT>
<BANKA type="varchar">S.A.</BANKA>
</storedProcedureName>
</Statement_Name>
</ns0:MT_SP_LFBK>
The mapping is between source CREMAS02 and the above target structure. Everything works fine.
The problem is when the vendor has more than one bank account number the IDOC CREMAS02 replicates the below segment E1LFBKM for each BANK account information. Since target and source are mapped one to one how can i map the second bank account information to the same target structure or genereate a new target Message type for the second bank account information and send it to sql ?
<E1LFBKM SEGMENT="1">
<MSGFN>005</MSGFN>
<LIFNR>110000021</LIFNR>
<BANKS>BOA</BANKS>
<BANKL>122207</BANKL>
<BANKN>4555-0</BANKN>
<BKONT>02</BKONT>
<BANKA>S.A.</BANKA>
<BNKLZ>3000000</BNKLZ>
</E1LFBKM>
Thank you ,
Teresa

Hi Teresa,
which segment have you mapped with <storedProcedureName action="EXECUTE"> ?
Because according to me , if you send <E1LFBKM> to <storedProcedureName action="EXECUTE">
, you will be able to use your stored procedure several times, in fact each times that you have a <E1LFBKM>.
Reminds: inside <Statement_Name> you can do several SQL actions like execute one or several stored procedures (could be different).
Of course, after that your table should accept to have several bank account for a same customer.
So to have something like that:
<Statement_Name>
<storedProcedureName action="EXECUTE">
</storedProcedureName>
<storedProcedureName action="EXECUTE">
</storedProcedureName>
<storedProcedureName action="EXECUTE">
</storedProcedureName>
</Statement_Name>
regards
mickael

How to map multiple source structures to single target structure

Hi all,
I have the scenario of 2 input files so i am using BPM for it. I have created the message types of the 3 input files. I have to finally generate an XML file which will contain the data of all the 2 files. That is i have to do 3:1 mapping.
Source Structure of File 1:
DT_PWC_Customer
RECORDSET
CUSTOMER
 REF_NO
 CUSTOMER_NO
Source Structure of File 2:
DT_PWC_Customer
RECORDSET
METER
 REF_NO
 METER_NO
Target Structure of Final Output File:
DT_PWC_CustomerMeterData
RECORDSET
CUSTOMER_METER
 REF_NO
 CUSTOMER_NO
 METER_NO
Above nodes i have shown in a heirarchical order..nodes with same indentation are at same level.
Can anybody tell me how to do this mapping in IR in graphical editor.
RAJEEV GUPTA

Hi,
To elaborate my requirement, I want to tell that since i will be having 2 input files- one for Customer & one for Meter. I want to finally generate one XML file which will have data from both these 2 input files. That is, if Customer file has 3 records(3 REF_NO, 3 CUSTOMER_NO) and Meter file has 4 records(4 REF_NO, 4 METER_NO), the final output XML file will have 7 records(7 REF_NO, 3 CUSTOMER_NO,4 METER_NO).
Thanks,
Rajeev Gupta

Mapping conversion of source value 4448601.75 to target value 448601

Mapping conversion of source value 4448601.75 to target value 4448601 or source value 999999.99 to target value 999999
Here standard functions like round, floor, ceil..etc, will not work because they will convert source value 4448601.75 to 4448602 and source value 999999.99 to 1000000.
Also i may have blank or white spaces coming in front of the source value from R/3 side like _____999999.99 and i want the value at the target side as _____999999. Here _____ representing blank or white spaces.
How i will do the mapping, can someone help me out.
Thanks,
Ashish
Edited by: Ashish Soni on Sep 6, 2008 9:53 PM

>>Here standard functions like round, floor, ceil..etc, will not work because they will convert source value 4448601.75 to 4448602 and source value 999999.99 to 1000000.
No....! The floor function can be used. It returns the largest integer that is not greater than the passed value. However this will also trim the spaces.
So u can write a UDF that accept the number and substring till the decimal point and returns it.
Try this.. It works..
public String converv(String a,Container container)
return a.substring(0,a.indexOf('.'));
Thanks
SaNv...

Value Mapping : Different Source - Same Target

Hi all,
Is it possible to map the different source value to the same target value with XI Value mappuing.
Because when i try to set the same target value for a second value .. the directory delete it for the first one.
for example i have:
Value1
Value2 --- newValue1
Value3
Value4 --- newValue2
Value5 --- newValue3
is it possible to build this somehow with ValueMapping?
Regards,
Robin

Hi,
no you missunderstood.
i useing the conversion function Value mapping.
The Values i set in Directory -> Tools -> Value mapping.
What i want know, is if value 1 and value 2 comes the value mapping hast to give back for both the same... value 3.
im only intressting of the values .. no structure other something else.
Regards,
Robin

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Getting the Source File name Info into Target Message

Hi all,
I want to get the Source file name Info into Target message of one of the fields.
i followed Michal BLOG /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Requirement :
1) I am able to get the Target file name as same as the source file name when i check the ASMA in Sender & Receiver Adapter , with out any UDF...............this thing is OK
2) I took One field extra in the target structure Like "FileName" & I mapped it Like
Constant(" " )--UDF-----FileName
I Checked the Option ASMA in Both Sender & Receiver Adapters
Here iam getting the Target File name as same as Source file name + Source File name Info in the Target Field " FileName".
I Dont want to get the Target File name as same as Source file name. I want like Out.xml as Target file name.
If i de-select the Option ASMA in Adapters means it is showing " null" value in the target field "FileName".
Please Provide the Solution for this
Regards
Bopanna

Hi All,
Iam able to do this by checking the Option ASMA in only sender adapter itself
Regards
Bopanna

Problem in OWB map for source change capture

The problem is as follows:-
Our OWB map between two different databases, captures change in data at source and populates them in target. It is a one to one map. The map is failing to process some rows from source database though it gives no:of errors as 0 in the audit view thus we infer that the map is running successfully.
In our case, we have a composite key ( Instance_id, Version_number) at source as well as target. One instance_id can has more than one version number. We have observed that the view is picking up all the version_number for a particular instance_id but the map is unable to populate the last version_number to the target table.
But when this map was executed in another environment and it is successfully populating all the data in the target.
The brief description of the map is as follows:-
The map has a view which captures all the changes in data (insert and update) .From this view we filter the rows which were already processed in previous map run (with help of watermark). Then we sort the rows based on DML type and watermark . These rows are then mapped to a target table. The loading type of the map is INSERT/UPDATE.

Hi Nagesh,
When we are doing I18N for that Application. Go to Navigator Tab
Here Select Particular Projects--à src-àPackages-àsap-àvijay
To internationalize the Web Dynpro application, copy the automatically generated *.xlf files and save them under a new name in the same directory.
The new name must meet the following convention:
u2022 .xlf
For example, if you are creating *.xlf files for German,
Use the language key de.
Here Click on OK
After that we can edit and translate these new *.xlf files in the S2X Editor.
ApplyTemFirstView.wdview_de.xlf-àClick on Resource Text Tab
Select Particular Text and Change the language to German-àClick on EDIT Button
Here Enter German Lang-àClick on OK
Now Go to Web Dynpro Explorer Tab
Select Project-àRC Click on Rebuild Project
Select Project-àRC Click on Reload
Then Deploye the Application
How to Check in Explorer. It is converting to German Language or not
Open Internet Explorer
Tool-àInternet Options -àClick on Languages Button-àClick on ADD Button
Select German Language--àClick on OK
Now We will Check in Portal
Created Web Dynpro iView in Portal. That iView assign to the particular WorkSet-àAssign to Role
Select that user Can Change Language
Regards
Vijay Kalluri

Mapping Identical Source GL Account to Idential Target Essbase Account

Similar Messages

Maybe you are looking for