Snd_hda_intel hangs on suspend... no sound on resume and rmmod errors out.
SL300 running ubuntu 8.10 i386
Anyone seen this before or know how to fix it?
I'm probably going to write a script to kill pulseaudio and the module before suspend and bring it back up afterwards.
Lenovo SL300 Owner
earning an MSECE at GATech, with undergrad in BME.
Hi there, well I had a similar problem, so maybe I can help. I just bought a new motherboard with a Realtek ALC880 that also has HD audio. With alsa 1.0.10 I couldn't get any sound, even though I could load all the sound modules as you have. What I did was go to the alsa website and download the sourcecode for alsa-lib and alsa-drivers for release 1.0.11rc1 (release candidate 1). You have to compile and install them - really easy read the INSTALL files in each one.
Now the HD audio works really well. I did remove the Arch package alsa 1.0.10 first, but I'm not sure if I had to or not. If you read the changelog for the alsa 1.0.11 files, you will see that they added autoprobe support for your card so this might do it.
good luck
Similar Messages
-
Audio sounds compressed, hollow, and tinny coming out of my computer
Hi everyone -
I'm having an audio issue when playing files in iTunes 8.1.1 (10) and Quicktime Pro 7.6 (472) . I'm using ia Dual 2.7 Ghz PowerPC G5 running OS X Version 10.4.11.
Recently I discovered that all of my audio files (music and spoken word podcasts) started sounding compressed, hollow, and tinny, both when I'm playing the files out of my speakers (Harman Kardon Soundsticks) or headphones (Sony MDR-7606).
At first I posted this message over on the iTunes forum, but after playing the files in Quicktime I discovered that they still sounded compressed. The majority of my audio files are ripped from my CD collection using 256 kbps, 44.100 kHz, VBR, optimized for Velocity Engine.
I don't think it's an issue with the files themselves - they sound normal when I play them using the same version of iTunes or Quicktime on my MacBook Pro running OS X 10.5.6, which makes me think it's a software issue with OS X, or perhaps a hardware issue - but I'm totally at a loss as to what would cause this change in audio quality.
Does anyone have any ideas?
Thanks,
DanThank you so much for this info! I have been trying to figure this out for months... Been driving me crazy why the audio sounded compressed and hollow when listening to it from within iTunes. Listening to 'previews' of the same audio files from the desktop sounded WAY better - now they both sound the same.
Thanks again! -
[Solved] No sound after resuming from suspend
After suspending and resuming I no longer have any sound output (through headphone jack or my laptop speaker). The laptop is a toshiba portege r835. I can't say how long this has been happening, since I've only tried to play any sounds after resuming recently.
Searching the forums I found the following thread: https://bbs.archlinux.org/viewtopic.php?id=151001
I haven't tried this because it isn't exactly the same problem, but mostly because I'm currently stuck on kernel 3.5.6 because of the sandy bridge power regression issues.
Does anyone have any other ideas on how to possibly fix this problem?
Thanks!!
Last edited by twistedcubic (2012-12-31 22:20:20)Solved, sort of.
I had some double suspend issue: I had set up suspend with systemd before using xfce and then after installing xfce I set my power settings so that the computer would suspend after shutting the lid, so I would have to open the lid, shut it, and then open it again for the computer to actually resume. After turning off the suspend setting in the xfce power manager, and just using the systemd suspend, the sound works fine on resume (both headphones and speakers)! -
I bought an iPad in June 2012 and have it worked fine, but after 2 weeks of purchase, he began to hang up, then the sound disappeared and the screen became black. I updated all through iTunes, but the sound is still absent, and still problem with sound and iPad still doesnt work.
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
Sound in system and Rhythmbox is scratchy and skips
Two problems. Since a few hours ago, the sound on my system and in Rhythmbox has been *extremely* scratchy. I'm playing mp3 files through Rhythmbox, and in the system, the terminal beep is also quite scratchy. However, the scratches aren't present in Totem. I'm just using the standard ALSA configuration, I believe, since I don't remember installing anything special to make my sound work.
I thought it might have been a simultaneous playback issue, because although I don't *play* sound in multiple apps at once, I often have several apps that utilise sound open (e.g. Totem, Rhythmbox, etc.) I changed my /etc/asound.conf file to this, based on the wiki. This is my /etc/asound.conf:
# Use PulseAudio by default
#pcm.!default {
# type pulse
# fallback "sysdefault"
# hint {
# show on
# description "Default ALSA Output (currently PulseAudio Sound Server)"
#ctl.!default {
# type pulse
# fallback "sysdefault"
# vim:set ft=alsaconf:
I thought maybe the update today broke this, but I don't know how to check which packages were updated today using pacman (or perhaps looking at modification times on files in /var/lib)?
The second problem is my sound skipping, in every application. This has been happening for several days. I checked the wiki and found that this problem can occur with a speaker system not being configured properly by the system, so I opened alsamixer to check the levels, as shown: Master (43), Headphones (100), Speaker (96), PCM (99), and Mic/Micboost, S/PDIF, and Beep are all muted. However, I still get skipping and scratchy noises even if I use headphones or my laptops normal speakers, without the speaker system plugged into the 3.5mm.
My audio controller is the built-in Intel device in my Lenovo SL510:
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Lenovo Device 20f2
Flags: bus master, fast devsel, latency 0, IRQ 47
Memory at f2a00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Any ideas for what I can check to figure this out?
Last edited by pythonscript (2012-07-03 02:17:48)Thanks Bengt and Chris,
I have all of the updates for all of the relevant applications,ie iMovie 6.0.2 and QuickTimePro 7.1.
I am aware of the problems that using the wrong sound format can cause and never use the 12khz setting.
I do not think it is a hardware problem, such as external HDs or other externals, because, I can fire up FCP and capture the same clips from my camera with no change other than quitting iMovie and booting FCP and the sound is perfect.
Thank you both for your input, I am really stumped here. I have been doing video on my Macs with since the early 90's when a 2gigabyte HD cost me over $2500 Australian and never had anything like this.
Back in those days the biggest problem was getting anything captured at all, perhaps I have become lazy and accustomed to things "just working". -
Suspend with Dell Inspiron 1720 and Nvidia closed source drivers
Hey all! I'm really liking arch linux. That being said, it would be nice if I could get suspend to ram (or disk) working on my laptop (dell Inspiron 1720 with Nvidia geforce 8800m) .
I followed the directions on the wiki for pm-ultils. When I try pm-suspend, my devices like mice and external HD's shut off, but all I get is a black screen with a blinking undercursor - the system does not appear to really suspend. Nothing will bring the system back, and I have to hard reboot.
I tried insatlling uswsusp and followed the directions for that, but get the same result. Here is my /var/log/pm-suspend.log:
Initial commandline parameters:
Wed Mar 11 15:17:58 PDT 2009: Running hooks for suspend.
/usr/lib/pm-utils/sleep.d/00auto-quirk suspend suspend: Adding quirks from HAL: --quirk-vbe-post
success.
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: Linux FancyHotel 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 22 11:03:50 UTC 2009 i686 Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz GenuineIntel GNU/Linux
Module Size Used by
nls_cp437 7424 0
vfat 12800 0
fat 50592 1 vfat
ipv6 260340 12
fuse 53020 2
ext2 66184 1
btusb 13464 0
bluetooth 54372 1 btusb
usblp 13952 0
hid_logitech 11392 0
ff_memless 6792 1 hid_logitech
usbhid 36640 1 hid_logitech
hid 40704 2 hid_logitech,usbhid
uvcvideo 57736 0
compat_ioctl32 3072 1 uvcvideo
ext3 127112 1
videodev 34176 1 uvcvideo
v4l1_compat 15364 2 uvcvideo,videodev
jbd 46996 1 ext3
joydev 11712 0
mmc_block 11012 1
usb_storage 95552 1
snd_seq_oss 31872 0
snd_seq_midi_event 8192 1 snd_seq_oss
snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 8204 2 snd_seq_oss,snd_seq
snd_pcm_oss 40192 0
snd_mixer_oss 16512 1 snd_pcm_oss
sdhci_pci 9088 0
sdhci 17028 1 sdhci_pci
arc4 3712 2
ecb 4608 2
ohci1394 31280 0
mmc_core 46876 2 mmc_block,sdhci
psmouse 55828 0
uhci_hcd 24592 0
b44 28560 0
ssb 40964 1 b44
pcmcia 35532 1 ssb
pcmcia_core 34452 2 ssb,pcmcia
mii 6528 1 b44
iwl3945 91128 0
rfkill 11596 2 iwl3945
mac80211 161184 1 iwl3945
led_class 5508 1 iwl3945
nvidia 7227388 0
snd_hda_intel 412980 0
snd_pcm 70020 2 snd_pcm_oss,snd_hda_intel
snd_timer 21384 2 snd_seq,snd_pcm
snd_page_alloc 10120 2 snd_hda_intel,snd_pcm
snd_hwdep 9092 1 snd_hda_intel
snd 50852 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep
serio_raw 7172 0
ehci_hcd 36876 0
ricoh_mmc 5632 0
ieee1394 79940 1 ohci1394
wmi 7848 0
video 18704 0
output 4608 1 video
cfg80211 31760 2 iwl3945,mac80211
soundcore 8160 1 snd
sg 26804 0
usbcore 136848 8 btusb,usblp,usbhid,uvcvideo,usb_storage,uhci_hcd,ehci_hcd
intel_agp 27836 0
agpgart 31572 2 nvidia,intel_agp
ide_cd_mod 38152 0
cdrom 35360 1 ide_cd_mod
i2c_i801 10896 0
i2c_core 22804 2 nvidia,i2c_i801
iTCO_wdt 12836 0
iTCO_vendor_support 4996 1 iTCO_wdt
dcdbas 9120 0
evdev 11296 9
thermal 17180 0
fan 6276 0
button 7824 0
battery 12036 0
ac 6020 0
cpufreq_powersave 3456 0
cpufreq_ondemand 8972 2
acpi_cpufreq 9868 0
freq_table 5632 2 cpufreq_ondemand,acpi_cpufreq
processor 41388 4 thermal,acpi_cpufreq
rtc_cmos 12332 0
rtc_core 17564 1 rtc_cmos
rtc_lib 4480 1 rtc_core
ext4 218268 2
mbcache 8708 3 ext2,ext3,ext4
jbd2 55192 1 ext4
crc16 3712 1 ext4
sd_mod 26904 7
ahci 30988 4
libata 157856 1 ahci
scsi_mod 102164 4 usb_storage,sg,sd_mod,libata
piix 8200 0
ide_core 103112 2 ide_cd_mod,piix
total used free shared buffers cached
Mem: 2073576 984996 1088580 0 141968 741552
-/+ buffers/cache: 101476 1972100
Swap: 1052248 0 1052248
success.
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: not applicable.
/etc/pm/sleep.d/50-hdparm_pm suspend suspend: success.
/usr/lib/pm-utils/sleep.d/55NetworkManager suspend suspend: success.
/usr/lib/pm-utils/sleep.d/55wicd suspend suspend: success.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/90chvt suspend suspend: success.
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
/usr/lib/pm-utils/sleep.d/95led suspend suspend: not applicable.
/usr/lib/pm-utils/sleep.d/98smart-kernel-video suspend suspend: success.
/usr/lib/pm-utils/sleep.d/99video suspend suspend: kernel.acpi_video_flags = 0
success.
Wed Mar 11 15:17:59 PDT 2009: performing suspend
I have not put anything my /etc/pm/config.d/ because the wiki was pretty vague and Im not sure what to do there.
I tried using uswsusp s2ram but that does not work. I added uresume to my /etc/mkinitcpio.conf and rebuilt the image to no avail.
s2ram -n shows this:
Machine matched entry 99:
sys_vendor = 'Dell Inc.'
sys_product = 'Inspiron 1720 *'
sys_version = ''
bios_version = ''
Fixes: 0x0
This machine can be identified by:
sys_vendor = "Dell Inc."
sys_product = "Inspiron 1720 "
sys_version = ""
bios_version = "A08"
See http://suspend.sf.net/s2ram-support.html for details.
If you report a problem, please include the complete output above.
which looks to me like I am whitelisted. Am I missing something here? Should I be using one of the DM's power managers? It would be cool just to be able to suspend with a command but if I have to use something else no problem as long as it works.
Running out of ideas, hope you guys can help. Plus the hard rebooting is wrecking my drive, I can see the non-contiguous percent rise each time.
Thanks.I know this is an old thread and i shouldn't be posting but i have been looking EVERYWHERE for anybody that has successfully installed an 8800M inside of an inspiron 1720... i was just wondering how you went about it???
Thanks. -
Sound is flat and with no bass on ProBook 4710s (XP SP3)
I have problem with SoundMAX integrated sound card in HP ProBook 4710s. Sound is flat and without any bass even if I connect it to the external speaker set. Only one solution I've found is reinstalling sound drivers but problem will appear after one or two days anyway. Sometimes after reinstalation, every program that try to use DirectSound hangs and I have to kill it from Task Manager and those programs starts to behave normally only after few reboots - at least until bass will disappear again. I'm using Windows XP SP3 with drivers from HP home page (everything properly installed). I will be glad if anyone could point me in the right direction how to solve this. Having to reinstall drivers so often is really annoying, apart from DirectSound stability. Thank you in the advance!
Go to msconfig and enable all services. This fixed mine. I think the actual service says "audio" in it. Hope this helps.
-
[CLOSED] sound over hdmi and optical
Ok I know sound of hdmi is a pain for everyone but I've have been all over the wiki and Google and have yet to get mine working! The weird thing is... sound works in XBMC. I got movies with 5.1 sound and 2.0 sound to work as well as music and everything else (except sound effects on menu selections but i can live with them) by setting the audio device to Optical/Coax, speaker config to 5.1, enabling DD AC3 capable and setting both audio ouput device and passthrough output device both to hdmi. However it ONLY works in XBMC. I'm trying to get some emulators working and it doesn't work in them. it doesn't work in an lxde environment either or when I run:
speaker-test -c 6
If I can just get sound working over hdmi I would be happy, If I can get it to work over hdmi and the optical out both that would be even better (although I have a feeling that'll just make things harder).
Here's my soundcards listed with "cat /proc/asound/modules"
1 snd_hda_intel
2 snd_hda_intel
Here is my aplay -L ouput:
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
hdmi:CARD=Generic,DEV=0
HD-Audio Generic, HDMI 0
HDMI Audio Output
sysdefault:CARD=SB
HDA ATI SB, ALC892 Analog
Default Audio Device
front:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
Front speakers
surround40:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=SB,DEV=0
HDA ATI SB, ALC892 Digital
IEC958 (S/PDIF) Digital Audio Output
I can get "speaker-test -D surround51:SB -c 6" to work but it's analog through 3 different 3.5mm jacks which apart from not being ideal, can't be hooked up to my surround sound system if I wanted it to.
Whenever I run "speaker-test -D iec958:SB -c 6" or "speaker-test -D hdmi:Generic -c 6" I get:
speaker-test 1.0.25
Playback device is iec958:SB
Stream parameters are 48000Hz, S16_LE, 6 channels
Using 16 octaves of pink noise
Channels count (6) not available for playbacks: Invalid argument
Setting of hwparams failed: Invalid argument
(obviously for the hdmi the playback device line reads hdmi:generic but otherwise they're the same)
I've been all over the alsa page of the wiki. When I tried the settings under https://wiki.archlinux.org/index.php/Al … DIF_Output they were already correct.
To anyone who's bothered to read all this ( I sorry it's so long I'm just trying to be thorough) Thank you!
If anyone has any clue what I can try to fix this I would be forever grateful.
Edit: Well it looks like all that messing around I did last night trying to fix things only made it worse. Now the sound in XBMC doesn't work either.
Last edited by Zarcjap (2012-03-21 12:33:48)Hi!
I spent the day asking friend google, browsing the arch wiki, ubuntu wiki and xbmc wiki.
Lastly, I made it work. I have to admit that I don't know why and don't actually understand a thing of what I did, it was trial and error. However, here is what I did:
installed alsa-oss (probably irrelevant)
set the audio output settings in xbmc to "Audio output"="Optical/Coax", "Audio output device"="Defaults" and "Passthrough output device"="hdmi".
used the following as my .asoundrc
pcm.dmixer {
type dmix
slave {
pcm "hw:0,3"
rate 44100
pcm.!default {
type hw
card 1
That's it. In case you are a sound guru willing to share your wisdom or else trying to make it work like I did, you might want some more info. Here you go.
Output of "cat /proc/asound/modules":
0 snd_hda_intel
1 snd_hda_intel
Output of "aplay -L":
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
hdmi:CARD=Generic,DEV=0
HD-Audio Generic, HDMI 0
HDMI Audio Output
sysdefault:CARD=SB
HDA ATI SB, ALC892 Analog
Default Audio Device
front:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
Front speakers
surround40:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=SB,DEV=0
HDA ATI SB, ALC892 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=SB,DEV=0
HDA ATI SB, ALC892 Digital
IEC958 (S/PDIF) Digital Audio Output
Output of "aplay -l":
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
Hope it helps anyone out there. In case I stumble upon further problems regarding this hack, I'll post them here.
Regards
lightandshadow -
my 2009 macbookpro has begun running very slowly, apps freeze and pages hang ... i've run EtreCheck and there are problems but don't know how to sort ... ran CleanMyMac and freed up about 30GB of space but didn't help ... ran AdwareMedic so that's been sorted but the other issues that came up on the EtreCheck I need help with however i can't figure out how to paste the results on this page
thanks thomas ... here it comes
EtreCheck version: 2.1.5 (108)
Report generated December 29, 2014 at 5:03:07 PM GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (17-inch, Early 2009) (Verified)
MacBook Pro - model: MacBookPro5,2
1 2.66 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1920 x 1200
NVIDIA GeForce 9600M GT - VRAM: 512 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 0:5:36
Disk Information: ℹ️
FUJITSU MHZ2320BH FFS G1 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
[redacted]'s world too (disk0s2) / : 319.21 GB (30.39 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-868
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Inc. iPhone
Logitech USB Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Configuration files: ℹ️
/etc/hosts - Count: 29 - Corrupt!
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Roxio
[not loaded] com.roxio.TDIXController (1.7) [Support]
/System/Library/Extensions
[not loaded] com.kensington.mouseworks.iokit.KensingtonMouseDriver (3.0) [Support]
/System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns
[not loaded] com.kensington.mouseworks.driver.ADBID32Mouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.ADBID32MouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.ADBID4Mouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.ADBID4MouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.KMWBluetoothHIDMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.KMWBluetoothOldHIDMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.KMWUSBHIDMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.USBMouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.VirtualMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.VirtualMouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.iokit.KensingtonMouseDriverX1 (3.0) [Support]
Startup Items: ℹ️
AdobeVersionCueCS2: Path: /Library/StartupItems/AdobeVersionCueCS2
Firewall: Path: /Library/StartupItems/Firewall
RetroRun: Path: /Library/StartupItems/RetroRun
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.CS4ServiceManager.plist [Support]
[loaded] com.adobe.CS5ServiceManager.plist [Support]
[invalid?] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[invalid?] com.adobe.SwitchBoard.plist [Support]
[loaded] com.adobe.versioncueCS3.plist [Support]
[loaded] com.adobe.versioncueCS4.plist [Support]
[running] com.atomicbird.macaroni.launchd.plist [Support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Support]
[invalid?] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.prosofteng.DriveGenius.locum.plist [Support]
[loaded] com.skype.skypeinstaller.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
[running] com.prosofteng.DGMonitor.plist [Support]
[running] ws.agile.1PasswordAgent.plist [Support]
User Login Items: ℹ️
CNQL1210_ButtonManager ApplicationHidden (/Library/CFMSupport/CNQL1210_ButtonManager.app)
System Events ApplicationHidden (/System/Library/CoreServices/System Events.app)
Mail Application (/Applications/Mail.app)
Firefox Application (/Applications/Firefox.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader 9/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Calendar Application (/Applications/Calendar.app)
Skype Application (/Applications/Skype.app)
Dropbox Application (/Applications/Dropbox.app)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
MouseWorks Background Application (/Library/Application Support/Kensington/MouseWorks.prefPane/Contents/Resources/Support/MouseWorks Background.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
EPPEX Plugin: Version: 3.0.0.0 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
ContentUploaderPlugin: Version: 1.2 [Support]
iPhotoPhotocast: Version: 7.0
RealPlayer Plugin: Version: Unknown [Support]
PDEPrint: Version: 2.0 [Support]
DirectorShockwave: Version: 11.5.2r602 [Support]
PDF Browser Plugin: Version: 2.4.2 - SDK 10.2 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
CANONiMAGEGATEWAYDL: Version: 3.0.0.2 [Support]
DivXBrowserPlugin: Version: 1.3 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Google Earth Web Plug-in: Version: 6.0 [Support]
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 [Support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
User internet Plug-ins: ℹ️
QuickTime Plugin: Version: 6.5.1
fbplugin_1_0_0: Version: Unknown [Support]
Safari Extensions: ℹ️
Ultimate [Installed]
3rd Party Preference Panes: ℹ️
ASM [Support]
DivX [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Macaroni [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Destinations:
G-DRIVE Mini [Local]
Total size: 999.86 GB
Total number of backups: 7
Oldest backup: 2014-07-09 00:13:07 +0000
Last backup: 2014-12-10 22:18:57 +0000
Size of backup disk: Excellent
Backup size 999.86 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
6% WindowServer
3% firefox
1% mds_stores
0% mdworker
0% Skype
Top Processes by Memory: ℹ️
348 MB firefox
137 MB Skype
122 MB mds_stores
120 MB com.apple.IconServicesAgent
73 MB Dropbox
Virtual Memory Information: ℹ️
1.26 GB Free RAM
1.74 GB Active RAM
477 MB Inactive RAM
543 MB Wired RAM
503 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 29, 2014, 04:58:09 PM Self test - passed
Dec 29, 2014, 10:58:04 AM /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105804_[redacted].hang
Dec 29, 2014, 10:54:33 AM /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105433_[redacted].hang
Dec 29, 2014, 10:52:33 AM /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105233_[redacted].hang
Dec 29, 2014, 10:50:24 AM /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105024_[redacted].hang
Dec 29, 2014, 10:50:24 AM /Library/Logs/DiagnosticReports/Skype_2014-12-29-105024_[redacted].hang -
Trying to Output Sound to Speakers and TV Simultaneously on H8-1360t
Hi everyone -
I have an HP H8-1360t with an AMD HD 7570 video card, running Windows 7 64-bit. I have speakers hooked up to the on-board sound via a standard 3.5mm cable. I run DVI to my monitor and HDMI to my TV. I am trying to get sound to go to the speakers and the TV simultaneously, without having to keep swapping the default playback device. I tried the following that I found online:
Open Sound panel
Select Speakers as the default playback device
Go to the "Recording" tab
Right click and enable "Show Disabled Devices"
A recording device called "Wave Out Mix", "Mono Mix" or "Stereo Mix" (this was my case) should appear
Right click on the new device and click "Enable"
Right click on the new device and click "Set as Default Device"
Double click on the new device to open the Properties window
Go to the "Listen" tab
Click on the "Listen to this device" checkbox
Select your HDMI device from the "Playback through this device" list
This worked the first time I tried it and I was getting audio through both the PC speakers and from the TV. Since then, it no longer works and I am only get audio via one or the other, depending on what device I select as my default. It's more of an annoyance than anything else - having to manually switch between output devices every time I want to watch something on my TV instead of my monitor. I assumed I could get dual audio output and simply not turn on the PC speakers when I wanted to watch something on the TV and it worked the first time! I don't understand why it is no longer working. Thoughts?
TIA!Thanks for the reply!
I believe that the answer is answer is yes to both questions - it defintely worked the first time. I'm not sure if I tried it on the first reboot or not but it did not work the next time I tried it. As far as what may have changed - I have no clue?!? I do not see that the 7570 or the Beats audio had any updates. According to Device Manager, I am running the latest IDT High Definition Audio CODEC driver.
i did notice a couple of things tonight. The video I used as a test the other day, that had audio and video going simultaneously on both displays, is displaying video on both the monitor and TV today but no audio on the TV. That said, when I open up the Sound control panel, and click on the AMD HDMI Output, right-click, and click "test", I do get test "beeps" through my TV (while the audio from my video is running through my PC speakers). So, it appears that it is indeed capable of outputting sound to both the PC speakers (via the onboard sound) and the TV (via the HDMI) - just not the same sound anymore! Another thing I noticed is that when I go to the Recording tab, the Stereo Mix selection is noted as the Default Device, and I can watch the "meter" on the right move up and down in sync with the volume of the video I am playing back - only there is no sound via the TV.
As usual, when I switch to the HDMI Audio Output as the Default Device, the sound plays fine on my TV.
This is strange... -
No Sound in VLC and Virtualbox
I have a workstation with two sound outputs - my ESI Juli@ and the HDMI out on my FirePro V5800. I have an issue where some applications cannot produce sound. That said, alsamixer and the OS itself do see the card, and it works just fine for sound from Firefox.
Originally, my issue was ALSA defaulting to the HDMI out and not giving me any audio. I first solved this by blacklisting the module for snd-hda-intel (the HDMI out). This "hack" allowed the OS to automatically choose the Juli@ as the default sound card and got sound working in the OS itself and Firefox. But then, I realized VLC and Virtualbox weren't working with the card and figured I should find a more proper solution. I got the following message from VLC:
"VLC failed to initialize your sound output device (if any).
Please update alsa-lib to version 1.0.23-2-g8d80d5f or higher to try to fix this issue."
Looking at the ALSA page on the Arch wiki, I decided that manually reordering the modules was necessary. The documentation there was poor, though, and I couldn't figure it out. Eventually, I found a forum post about the above error message and someone put things in more simple language. As such, I've modified my modprobe.conf to look like this:
# /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
options snd-ice1724 index=0
options snd-hda-intel index=1
I must've done something right, because the OS and Firefox get sound just fine with the Juli@ as the default sound card without me blacklisting the HDMI out's module. However, my issue in VLC and Virtualbox remains with the same errror message, so I figure I'm missing something.
Here is the output of aplay -l:
**** List of PLAYBACK Hardware Devices ****
card 0: Juli [ESI Juli@], device 0: ICE1724 [ICE1724]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Juli [ESI Juli@], device 1: ICE1724 IEC958 [ICE1724 IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
The relevant entries from lspci -v:
01:01.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01)
Subsystem: Device 3031:4553
Flags: bus master, medium devsel, latency 64, IRQ 23
I/O ports at a000 [size=32]
I/O ports at 9800 [size=128]
Capabilities: <access denied>
Kernel driver in use: ICE1724
Kernel modules: snd-ice1724
06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series]
Subsystem: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series]
Flags: bus master, fast devsel, latency 0, IRQ 51
Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
And the output given by VLC when run from command line and given a file to play:
VLC media player 1.1.6 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE")
Blocked: call to setlocale(6, "")
Blocked: call to sigaction(17, 0x7f2a8f203ab0, 0x7f2a8f203b50)
Warning: call to signal(13, 0x1)
Warning: call to signal(13, 0x1)
Warning: call to srand(1296590680)
Warning: call to rand()
Blocked: call to setlocale(6, "")
(process:5985): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
Warning: call to signal(13, 0x1)
Blocked: call to sigaction(11, 0x7f2a8f203370, (nil))
Blocked: call to sigaction(6, 0x7f2a8f203370, (nil))
Blocked: call to sigaction(5, 0x7f2a8f203370, (nil))
Blocked: call to sigaction(8, 0x7f2a8f203370, (nil))
Blocked: call to setlocale(1, "C")
Blocked: call to setlocale(1, "en_US.utf8")
Blocked: call to setlocale(1, "C")
ALSA lib pcm_direct.c:980:(snd1_pcm_direct_initialize_slave) unable to install hw params
ALSA lib pcm_dmix.c:1030:(snd_pcm_dmix_open) unable to initialize slave
[0x26a0d60] oss audio output error: cannot reset OSS audio device
[0x26a0d60] jack audio output error: failed to connect to JACK server
ALSA lib pcm_direct.c:980:(snd1_pcm_direct_initialize_slave) unable to install hw params
ALSA lib pcm_dmix.c:1030:(snd_pcm_dmix_open) unable to initialize slave
Warning: call to sigaction(14, 0x7f2a85830850, (nil))
SNDCTL_DSP_GETFMTS: Device or resource busy
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
Warning: call to rand()
I'm thinking the system seeing the Juli@ as two devices means I need to add another line to modprobe.conf, but I'm not really sure at this point. It'd be awesome if someone a little more expert regarding ALSA and maybe this audio chipset could please give a guy some help.BUMP for this one.
I've updated packages since then, as well as manually selecting ALSA as playback for these two programs with no luck. I've tried using the instructions here:
http://www.alsa-project.org/main/index. … le-ice1724
But it seems like most of it isn't relevant... My Arch install has soundcore.ko.gz, snd-cmipci.ko.gz, and snd-ice1724.ko.gz just by proxy. The part about /etc/conf.modules is deprecated in Arch as well.
I'm dying to have sound in VLC and my VMs on my desktop. Please help! -
My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?
If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
Close all apps completely and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
i have made a movie in imovie on my macbook pro, but apparently i don't have idvd!!!
i need to burn this so i can watch it somewhere else, but im not sure how...
ive already tried simply exporting it to Quick Time, and burned it to a dvd, but when i watched it... the sound was wrong and people's words were like muted...
what do i do?!?! i don't know where or how to get idvd!
help!!!Hi
There are two structures of DVDs
• Data-DVD - as burned from DeskTop/Finder
• Video-DVD - to be played on a DVD-Player - Needs a program that can do this
One can in iMovie - Export as QuickTime .mov and save this via DeskTop/Finder onto a DVD - BUT this will only play on a Computer and if it is a Window-PC this needs to download QT-player or VLC-player.
But no DVD-player for TV can play back this.
To get a Video-DVD then You need
• iDVD (not from Apple any more) - or -
• DVD Studio Pro (not from Apple any more) - or -
• FinalCut Pro-X (can do simple Video-DVDs) - or -
• Burn - http://www.digital-digest.com/software/Burn.html - FREE - but very PLAIN - no fancy things at all.
• Roxio Toast™ 11 Pro - Fairly advanced - and costs a bit - still very Good and lot's of great tool's included. (I love it) - Can also back convert home made DVDs to an editable mode in an OK quality. With BD-component also capable to do sort of Blu-Ray DVDs.
Yours Bengt W -
Since updating to os7.1.1 i lost my safari sound on ipad and iphone
Hi pr1uk,
It appears your devices are experiencing audio issues. The following article provides steps which may help you find a solution:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D -
Help me please someone...In the middle of auditioning loops within a project, all my loops started sounding all wobbly like they are out of phase or something. what can i do to fix this. Thanks
raise your I/O buffer and raise your Process Buffer Range.
Logic Pro>Preferences>Audio>Devices>Coreaudio
Maybe you are looking for
-
How to generate a query involving multiple tables(one left join others)
Hi, all, I want to query a db like these: I need all the demographics information(from table demo) and their acr info(from table acr), and their clinical info(from table clinical), and their lab info(from table lab). The db is like this: demo->acr: o
-
Local logical system is not defined when tried to create new maint. trx.
Dear Experts, I encountered this message "Local logical system is not defined" when I tried to create new maintenance transaction in DWSP (at Maintenance Optimizer of Solution Manager). This message kept on appeared even though I've created and assig
-
What is the correct model no Bluetooth card for early 2005 G5
Hi, Could someone please tell me the correct model no Bluetooth card for an early 2005 2.0Ghz Duel Processor PowerMac G5 (Serial CK5300SCRTY), i have two model no's but am confused about the correct one, one is A1115 and the other is A1044. Also is t
-
Clips always unrendered and offline when project is loaded
Having a weird problem at the moment that seems to make no sense at all, so any help would be vastly appriciated. Currently have a project where everytime it is loaded up all the footage with effects on, or with titles, says media offline, despite th
-
Was importing a photo into iMovie 8.0.6 and it crashed. Was never able to get it running so upgraded to 9.0.2. Now the 1st photo in my show has another photo overlaying it. If I delete it, the phantom photo moves over to the next area and still plays