Snipping tool is not saving the snip

I use windows 7. I wasn't using the snipping tool but when I used it, it didn't saved my snip even when I clicked "Save as". And when I tried to close that window the dialogue box for saving the snip appeared but also after selecting "yes"
it just disappeared. Which kind of error is this? And how would I solve this?

A few suggestins:
You may try a System Restore-select any Restore Point when there was no such issue.
You can try to create another user account with administrative privileges and login to see if the same issue occurs.
You may use SFC /scannow to check the system file first:
http://support.microsoft.com/kb/929833
S.Sengupta, Windows Entertainment and Connected Home MVP

Similar Messages

My Mozilla 10.0.1 Is not saving the history of more that two days

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/918527]]</blockquote>
My Mozilla 10.0.1 Is not saving the history of more that two days

Make sure that you do not use "Clear history when Firefox closes" to clear the <i>Browsing History</i>.
*Tools > Options > Privacy: History: [X] Clear history when Firefox closes > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
If you use cleanup software like CCleaner then check the settings for the Firefox application.

Admin tool could not load the essbase driver.Please check the configuration

Hi All,
I have obiee11g installed machine and want to connect that machine with essbase.
For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
*1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
*2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
*3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
And also I manually added the essbasepath in bi-init.cmd file.
Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
"*Admin tool could not load the essbase driver.Please check the configuration*."
kindly guide me to overcome this issue.
Thanks and Regards
sai
Edited by: 923924 on Apr 24, 2012 5:20 AM

Until you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again.

Camera not saving the phots

after updating i phone(4.3.5) camera not saving the photos

Ok .... try this:
Take a pic them open it. See if you can rename it. If you can, give it a name then save it with that name and close the camera app. Now do a search for that name and see if you can find it.
Also try to change the camera settings to store the pic on the device.

BDC not saving the Document

Dear Friends,
I have written the BDC for FB01. It's uploading all the voucher entries properly but after the last entry it's not saving the document and asking for new entry..
What may I be missing? Any clues???
Regards,
Alok.

Hi ,
Use simulate button, to check and make sure the amount on both sides(DR/CR) are equal. If the problem is not solved then check for your BDC recording, is having any Popup's screens to fill the mandotary fields like cost center like that.
Thanks,
Bala.

My red eye tool is not under the Spot Healing Brush, Photoshop CS3 Help?

I have Photoshop CS3 and I just recently downloaded it to my new computer. My red eye tool is not under the spot healing brush like it is suppose to be. where could it have gone? any help would be greatly appreciated! thanks!
Jolene

What tools do you see in the flyout menu?
(click and hold to see the flyout menu)
What happens if you use Shift+J to cycle through the 4 tools in that slot in the toolbox?

Safari tool bar not saving

I just updated to Yosemite & every time I open Safari, I have to set it up again. I customize my tool bar, quit, & when I reopen it's not saved.

I have the same exact issue. I hope they issue a fix. I want my favorites bar visible at all times.

Not saving the data in two tables

Hello,
its my production problem, i have an update form where you can update the records and these
records will sit in the temp tables until the final approval from the supervisor.
In this update form i have two table where i am saving the data one is dup_emp to save the
officer data and another is the dup_address to save the officer where he worked data.
in this form address form is pop up screen where you can update and gets back to the original
form where you can see all the other fields. my problem is if a user hit the cancel button on
address form example the user doesnt want to update any information on that screen so user
cancel that screen, and comes to the other screen where the user makes the changes to the
appropriate fields and hits the SAVE button. in this case its saving only to the dup_emp table
data not the address data from the address form to dup_address table for the same record.
if the user cancels in both the screens cancel button it should delete the record from both the
tables but cancel in form and saves in another form it should save the record in both the
tables.
here is my code from both cancel buttons from both the forms.
this is code is from address form cancel button.
delete from dup_address
where address_id=:address_id
and parent_table_name='emp';
commit;
CLEAR_BLOCK;
go_block('DUP_EMP');
This code is from dup form of the cancel button
declare
temp_address_id varchar2 (12);
begin
delete from dup_emp
where secondemp_id =:dup_emp.secondemp_id;
delete from dup_address
where parent_t_id=:global.secondemp
and parent_table_name='emp';
commit;
clear_block;
go_block('secondaryemp');
END;

Hi,
As Aravind mentioned, it's nothing related to workflow. You have to find a BADI in tcode PA30 that could be used after the infotype is updated. So, you can use FM SAVE_TEXT.
Regards,

When i am trying to download something it is diaplaying downloads window but not saving the file in that why?

i tried cache clearing and application tools settings and all.
it is asking for want to save ur binary file eventhough i press save button also it is not saving anywhere please resove my problem as soon as possible. And i tried pop3 blockers settings also but of no use.

See:
* http://kb.mozillazine.org/Unable_to_save_or_download_files

OC4J Report Server is not saving the PDF out put

Hi everybody,
I have a master report running under OC4J.Under this master report 1000's of other reports are runninng by using the srw.run_report.Report name and other required parameters are taking from the database.My aim is to send all generated PDF reports by using the javamail.My problem is report server is not saving any reports until the completion of the master report.Once the master report is completted we can see all the reports under the specified folder, before that we can not see the out put in the folder .So the above reason my mailing part is getting faild because of system cannot find the specified file in that particular path
Hi anybody know how to save each pdf report in a folder insted of waiting the completion of entire report
Is any particular report configuration is required for that?
srw.runreport is running in the batch mode
thanks in advanceee
regards
mathew
Message was edited by:
Mathew Thomas

Please helppp meee

Not saved the changes to the information for the movie.

Hi guys!
Suddenly faced with a problem: the changes are not saved in the statement made by me about the movie. I make the changes themselves, close the properties, open again and see that all the changes I've made have disappeared.
This occurs only on MAC OS X Mavericks.
If close iTunes on this computer, and open at the other with MAC OS X Mountaine Lion and try to edit the infornation movie - after closing and re-opening information about the movie is saved. Tried different movies, the result of similar: on iTunes MAC OS X Mavericks are not stored on MAC OS X Mountaine Lion - everything is fine.
Show you how to cure this problem?
My iTunes library is on a network hard drive WD My Book Live.
Add movies / music etc. turns on both machines. When trying to make changes in information about the movies to the library is connected to only one computer.
All available updates for both computers are set.
I reinstalled iTunes, ran a disk check on the computer.
Films are not purchased in the AppStore, but me personally encoded in a format m4v.
Folders and files in your iTunes library have the following rights:
Daapd - read / write
staff - read / write
everyone - read / write
Pls, need help. Thk Y!

No one is faced with similar? I am glad that I only have these problems

RoboHelp for Word 7 is not saving the rtf and won't compile .hlp

I use RoboHelp for Word 7 to produce WinHelp files. It's been working fine for several months on this computer.
Just in the past week, I had an issue with my Word 2007 when trying to open a .doc file. I got the message that the converter nswrd632.wpc wasn't found. After searching on the Microsoft forums, I edited the registry and registered that converter.
But now (and this may be unconnected to the Word converter message) RH won't save the .docx or .rtf file. Whenever I click Save All, nothing happens. When I click Exit Project, the message comes up about needing to save the files, and I click Yes to All. Nothing happens except the message closing. No files are saved and RH does not exit. The only way I can exit RH is to click No, which of course means my changes aren't saved. I can't save the .docx file through the Word menu, either.
I also cannot compile the file. Again, no error message, just doesn't compile.
I have searched the forums for RH for Word, with the result that I've reinstalled RH, made sure the RH add-ins are enabled, and deleted all the .dot files. Nothing is working. I went to Peter Grainge's Snippet 112 and followed the directions there--no change.
I have found that after making my edits in the Word document, if I manually save the RTF file by going to the Word Save As directory, the edits will be saved and RH will compile the .hlp file - one time.
Any ideas?

Hi, I have a nearly identical problem, except my project uses .doc files instead of .rtf files. I was able to solve the "cannot save" problem by following the information below. I still have not resolved the "cannot compile" problem.
I'm using Windows XP, RH7 Build 100, Office 2007. My project was created using Office 2003 and I did not experience any of these issues until I recently upgraded to Office 2007.
This fix was sent to me by my group's "tech" guy.
A number of Adobe RoboHelp for Word 7 users have reported that they cannot save changes or generate an output. The cause has been isolated to the RHComAdd.DLL being disabled.
Check for that in Word:
For versions up to 2003 go to Help | About | Disabled Items. If RHComAdd.DLL appears, re-enable it.
For Word 2007, go to the Office Button | Word Options | Add-ins. Under "Manage" select Disabled Items and click Go. If RHComAdd.DLL appears, highlight it and re-enable it. (THIS IS WHAT I DID)
Alternatively, you can re-register the DLL. Go to Start | Run and type in the following line, assuming you have installed RoboHelp to the default location.
regsvr32 "C:\Program Files\Adobe\Adobe RoboHelp 7\RoboHELP\RHComAdd.dll"
How does this DLL get disabled? The cause has been identified as a Word document being opened in Internet Explorer rather than in Word.
This problem was fixed in Build 7.0.2.
Hope this helps you. I'm still working on the compile error.
-Shannon Mooney

When working with quick selection tool (and not only) the whole psd file gets damaged.

Hello there,
Since I first tried Photoshop CS6 on PC I encounter the following problem: when I use quick selection tool at some point the selection gets completely random and I see parts of my artwork disapear. Even after closing the file without saving the changes I see the artwork completely corrupted, without any possibility to recover. As if parts of the image were deleted.
The problem persisted after I changed to Creative Cloud on Mac (I'm running OS X 10.8.5.)
I have just seen that it also happens when I work with regular layer masks.
I desperately need to fix this problem because I cannot keep using hours of retouching work again and again.
Hope someone can help.
Cheers
Julia

I am also having the same exact issue. This is the third time this has happened in about six months. I use the quick selection tool and I see a alpha mask that looks truncated and it show random parts of the image in the mask which has nothing to do with the selection. But the worst part of this is that my retouching layer the only other layer comes back completely empty even if I try to save the file in various other file types like tiff and it comes back empty. I'm losing a lot of retouching time here. I also hope some else has an answer.
Thanks
Mike

PSE7 is not saving the edits I make to my pictures

I'm working in the Editor and I am saving the edits I make as a jpeg file. I then go back to Organizer and my edits were not saved.
Any ideas why this might be happening?

Usually, File->Catalog->Repair and Optimize will fix the problem for future edits

How to stop Frefox from being default browser? The links under tools do not match the answers in other discussions.

I cannot get Firefox to stop being my default browser. I have read other answers online, but the links under the tools do not match, what the other say to click. I tried to go into internet explorer to change it, but the set default button is grayed out and does not work. Help. I cannot update my programs in Firefox.

Firefox/Tools > Options > Advanced > General: System Defaults: "Always check to see if Firefox is the default browser on startup"
*Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.
*Use "Firefox > Options" instead of "Tools > Options" if the menu bar is hidden.

Snipping tool is not saving the snip

Similar Messages

Maybe you are looking for