Not saved the changes to the information for the movie.
Hi guys!
Suddenly faced with a problem: the changes are not saved in the statement made by me about the movie. I make the changes themselves, close the properties, open again and see that all the changes I've made have disappeared.
This occurs only on MAC OS X Mavericks.
If close iTunes on this computer, and open at the other with MAC OS X Mountaine Lion and try to edit the infornation movie - after closing and re-opening information about the movie is saved. Tried different movies, the result of similar: on iTunes MAC OS X Mavericks are not stored on MAC OS X Mountaine Lion - everything is fine.
Show you how to cure this problem?
My iTunes library is on a network hard drive WD My Book Live.
Add movies / music etc. turns on both machines. When trying to make changes in information about the movies to the library is connected to only one computer.
All available updates for both computers are set.
I reinstalled iTunes, ran a disk check on the computer.
Films are not purchased in the AppStore, but me personally encoded in a format m4v.
Folders and files in your iTunes library have the following rights:
Daapd - read / write
staff - read / write
everyone - read / write
Pls, need help. Thk Y!
No one is faced with similar? I am glad that I only have these problems
Similar Messages
-
How to restrict the change access in CRM for OLTP orders
Hi Guru's,
Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
We have the orders that are created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM system is allowing change mode for ECC orders and ending up with errors.
Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
Regards
SuneelHi.
You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
Regards. -
My apple id has been hacked. hacker has changed all information in the apple id so I can not change the password. Account information from the apple id created is still in my mail. How do I regain apple id. Thanks
Contact Apple support: Apple ID: Contacting Apple for help with Apple ID account security
-
I HAVE A BIG PROBLEM I HAVE NOT BEEN ABLE TO RECOVER THE ANSWERS OF SECURITY SINCE THE MAIL THAT APPEARS TO DO THIS MEAN I NEED TO CHANGE THE OTHER SHOULD I DO FOR THE TRUTH WILL MAKE A PURCHASE AND ME THE REQUESTS, AS IS A NEW PHONE EXPECT AN ANSWER PROMPT AND POSITIVE
so I get looks but that is not my email recovery can help you reset your security information by sending a message to your email recovery: j ••••• @ mail.comYou need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(111384) -
I am trying to work with Application settings. I would just like to put together a very simple example of using these, but I can't get the most basic example to work. Virtually every tag regarding the new Settings produces an Error "Could not find the schema information for the element "applicationSettings". or the element "Settings" etc. etc. I am not using IIS, this is not a Web Project, and I am not working with User Settings. Just simple read-only Application Settings. I've read every MSDN page regarding this subject, I don't see that I am missing a reference - HELP !!!
REPRODUCING THE PROBLEM:
Step 1. Create a new C# solution and Windows Forms project.
Step 2. Add a reference to System.configuration
Step 3. Right click the project, choose Properties, then Settings.
Step 4. Using the Settings Designer, create ONE setting called "MySetting" as a String with the value "MyValue".
RESULT: Observe the Errors like these, complaining about all of the Settings tags and elements.
Message 1 Could not find schema information for the element 'applicationSettings'.
Message 2 Could not find schema information for the element 'LoadOriginalLists.Properties.Settings'.
Message 3 Could not find schema information for the element 'setting'.
HERE IS MY APP.CONFIG, AS GENERATED BY THE SETTING DESIGNER TOOL:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<configSections>
<sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<section name="LoadOriginalLists.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
</configSections>
<applicationSettings>
<LoadOriginalLists.Properties.Settings>
<setting name="MySetting" serializeAs="String">
<value>MyValue</value>
</setting>
</LoadOriginalLists.Properties.Settings>
</applicationSettings>
</configuration>Ummmm... okay so these are Messages that are in the Error List. Whether or not they are actually Errors is debatable. They are in the Error List, so they are errors.
The application runs, so my question is slightly changed to the following.
I would like to use Application Settings. However, having settings in my app.config pollutes my Error List with a bunch of meaningless messages like "Could not find the schema information for...". These messages then hide real errors.
Am I missing some setting or is there something I can do to make Visual Studio not show me these messages? -
Could not find schema information for the attribute 'filename'
Can anyone help me.
I download the VB.NET sample source and try to run the application and got this error.
"Could not find schema information for the attribute 'filename'"
and
"Could not find schema information for the attribute 'url'"
and
"Custom tool warning:Schema validation warning:Schema item 'element' named 'AccountWS_AccountUpate_Input' from namespace 'urn:crmondemand/ws/account/' is invalid. Namespace 'urn:/crmondemand/xml/account' is not available to be referenced in this schema"
Thanks
PitipornAre these errors or warnings? If warnings, you should be able to just ignore them.
-
This is my app.config file
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<configSections>
<sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<section name="IntelBrandFX.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
</sectionGroup>
</configSections>
<appSettings>
<add key="connStr" value="Data Source=tmvnasql1.tmvn.com;Initial Catalog=brandplan;Integrated Security=True"/>
</appSettings>
<applicationSettings>
<IntelBrandFX.Properties.Settings>
<setting name="IntelBrandFX_rollupViewerService_extract" serializeAs="String">
<value>https://viewer.rollup.com/omdsp2008/extract.asmx</value>
</setting>
</IntelBrandFX.Properties.Settings>
</applicationSettings>
</configuration>
And the Warning messages are
Message 1 Could not find schema information for the element 'applicationSettings'.
Message 2 Could not find schema information for the element 'IntelBrandFX.Properties.Settings'.
Message 3 Could not find schema information for the element 'setting'.
Message 4 Could not find schema information for the attribute 'name'.
Message 5 Could not find schema information for the attribute 'serializeAs'.
Message 6 Could not find schema information for the element 'value'.
Althought they do no hinder me from successfully running the project. these messages are annoying. I have seen many articles on the web but could nowhere find the exact schemas for that the above elements that I could add to the DotNetConfig.xsd file.
Could somebody give me an idea how to create xsds for the elements above and include in the dotnetConfig.xsd.
I understand what needs to be done but not sure of the exact way to do it.
Thanks,You don't need to modify the dotnetconfig.xsd. All you need to do is generate an XSD for your section and let VS know where it is at.
1) Create your XSD using any of the various tools available or by hand.
2) Copy your XSD into the <VSDir>\Xml\Schemas directory.
3) Create a catalog file for your schema.
4) Restart VS and it'll load the XSD and give you Intellisense.
Here's the MSDN documentation for it: http://msdn.microsoft.com/en-us/library/ms255821.aspx
Michael Taylor - 8/18/09
http://p3net.mvps.org -
I just upgraded to iPhoto '11. When it was finished many pictures do not appear. I have a black box but the information for the picture is still there. Some are raw and some are jpeg. Also lost all albums. Can anyone offer assistance? Using iOS 10.7.5
Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?
When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?
-
I have an apple id and it has my current email attached to it. however when i go to update apps it's asking for the password for an old email. I no longer have the old email and can't use it. when I go to icloud on my ipad it asks for the password for old email. it doesn't allow me to change the old email to current. when i go to reset it i can't remember the password or security questions for the old email so it doesn't let me go any further. How do I fix this? Do i need to call apple support?
I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option? -
I created an new apple id and want to change my billing information from the old id to the new id. How do i do that, as i have been trying it like always and it keeps saying that i have to contact apple support? I have an iphone 5S.
Good day BenithaK,
Once you have changed your Apple ID, you need to set it up for use in the various systems such as iTunes, the App Store, etc so it can be used as intended. This article shows how to do that -
Apple ID: What to do after you change your Apple ID - Apple Support
To change your iTunes billing information for either Apple ID account, follow the directions in this article -
iTunes 12 for Mac: Manage your iTunes Store account
Thanks for using Apple Support Communities.
Safe computing,
Brett L -
I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above. -
SCB indicator is missing or is not valid-No DME could be generated for the
Hi All,
Using transacttion F110,
vendor payments were generated. Payment run successful.
In 'Display Payment Run log',
Warning: Check whether a duplicate payment medium has been created
SCB indicator is missing or is not valid
No DME could be generated for the following documents
CoCd Payment document/Payment order
0100 2000199545
>
> Overview of the files generated (DME)
> Name / File name
> DME file (TemSe) - bank BK03 / DTA111128154701_3215
>> Error log / LISTFS / 0000093865
I have checked the document has SCB number stored.
please suggest.
Thanks and Regards
ReenaHi Reena,
The error you have mentioned in the initial description is the error code F0265.
Regarding the error code F0265, this arises because the payment medium programs RFFO* look for the field bseg-landl and bseg-lzbzk to be filled.
These fields are necessary for Germany as the f1-help states and if they are missing, you receive these error messages f0265. Please have a look at note 23562 as well for more information.
Sometimes users forget to enter SCB indicator in the invoice document and thus it results in problem reported error messages
at the time of creating payment medium.
In this case either you can make the SCB indicator field "required" in the field status or create a validation rule for those invoices for which SCB indicator should be entered.
To derive SCB indicator automatically I think substitution rule could be of help too as a workaround.
Hope this helps.
Kind Regards
Soumya -
Not possible to determine a condition type for the price in ME49
Hi,
While saving the price in ME49 i.e. comparision of Quotation i am getting below error:
Not possible to determine a condition type for the price
Message no. 06657
Diagnosis
When it attempted to generate the time-dependent conditions for the price you entered, the system was unable to determine a condition type. Price determination is therefore not possible.
Procedure
Contact your system administrator.
The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG).
UtsavHi Utsav,
You can refer to the following link. it might be useful to you
RFQ price
Thanks
Nisha -
I have not been able to find any information re: the Flashback virus on the Apple website. Has Apple put out anything on this?
The ‘Flashback Trojan’:
A version of an existing Trojan Horse posing as a legitimate Flash Player installer (named “Flashback.A” by a security firm) is designed to disable updates to the default Mac OS X anti-malware protection system, potentially leaving the system open to the manual installation of other malware without any system warnings. The most recent versions bypass any user action and automatically installs itself after an affected website is visited.
http://www.appleinsider.com/articles/11/10/19/fake_adobe_flash_malware_seeks_to_ disable_mac_os_x_anti_malware_protection.html
(Adobe is aware of malware posing as its Flash Player and warns users to ignore any updates that didn't originate on its own servers. "Do not download Flash Player from a site other than adobe.com," said David Lenoe, Adobe's product security program manager, in an entry on Adobe Product Security Incident Response Team's PSIRT blog. "This goes for any piece of software (Reader, Windows Media Player, QuickTime, etc). If you get a notice to update, it's not a bad idea to go directly to the site of the software vendor and download the update directly from the source. If the download is from an unfamiliar URL or an IP address, you should be suspicious.")
Flashback Trojan - Prevention of infection:
In order to prevent a potential infection with “Flashback” Trojans, Mac users should always obtain their copy of Adobe Flash Player directly from Adobe’s official website and to disable the "Open 'safe' files after downloading" option in Safari Preferences/General to avoid automatically running files downloaded from the Internet. Also, do not turn on Java in Safari Preferences/Security. Few websites use Java. Javascript is something entirely different and should be left active.
The Flashback Trojan does not affect PPC (non-Intel) Macs, nor has it been noted to affect users running Tiger OS 10.4.11 or Leopard OS 10.5.8.
Last, but by no means least, using Open DNS is the simplest way of preventing infection in the first place. Open DNS also protects against phishing attacks, re-directs, speeds up your internet connection, and works for all users of OS X from Tiger upwards:
http://blog.opendns.com/2012/04/09/worried-about-mac-malware-just-set-up-opendns /
How to get it:
https://store.opendns.com/get/home-free
Flashback Trojan - Detection and Removal
Users with Intel Macs running Snow Leopard OS 10.6 or Lion OS 10.7 should ensure that they have downloaded all the recent Java updates from Apple, which are designed to prevent infection and also remove any infection already present.
New Macs running Lion do not have either Flash Player nor Java installed. If you running Lion and have not already downloaded and installed Java, you should download the ‘Flashback malware removal tool’ from Apple: http://support.apple.com/kb/HT5246 (356KB) which includes the same code as the Java update that plugged a security hole which allowed the malware to automatically install itself without admin authorization.
You can also use this to check whether you have been infected (for Intel Macs only) and remove it if required:
http://www.macupdate.com/app/mac/42571/anti-flashback-trojan
Flashback Trojan - Detection, and how to remove (with caution) if you are running other browsers than Safari:
http://www.f-secure.com/v-descs/trojan-downloader_osx_flashback_i.shtml -
SKIP SHIPPING / BILLING / PAYMENT INFORMATION FOR THE ORDERS FOR A STORE
We are trying to build 0$ evaluation store and would like to know if there is a
way not to force the user to enter payment type, billing and shipping
information for the orders getting placed as the customer is not really charged
for the evaluation kits purchased and not getting the physical shipment also. (
user can download the kit electronically by the link provided in the workflow
order confirmation mail ).
Please advice. Thanks.Gatormomof3 wrote:
... Is it possible to add the "none" option??....HELP
AFAIK... Not if it is not offered...
You could Contact iTunes Customer Service and request assistance...
Apple Support iTunes Store Contact Us
Maybe you are looking for
-
Font Smoothing/Clear Type disabled on RDP Session, color depth low
Hello One of our customers has a new laptop Asus G771JM-T7021H with Windows 8.1 on it. The graphics, font etc. is good as long as he works locally. When he connects to the terminal server (2012R2) via RDP, the resolution and font is hardly readable.
-
How do I set the zoom, to stay on each time a new page reloads? i know that "command +" zooms in, but how do i make it stay that way?
-
BUSINESS DELEGATE PATTERN AND DAO
Culd anyone explain me then with an example? Thanks in advance.
-
i tried to buy a tv show and i keep getting this go to www.apple.com/support/itunes/ww/
-
How do I buy Photoshop CS6 for the student price without having to get the cloud?
I want to get Photoshop for the reduced student price but cant find out how to purchase it. It wants me to get cloud and I don't want that. I have no need for the other programs that comes with cloud.