SNMP service on IPCC

Hi,
I want to enable snmp service on our IPCC environment; ICM 7.2, CVP 7.0. Need guide from anyone that has done that before.
Regards,
Nnamdi

Gee, you don't have to do much.
Installing one of the service releases (can't recall which one, but certainly 7.2(7)) disables the Windows SNMP service and installs the Cisco version of the SNMP service which it then starts.
Then you use the mmc snap-in to configure it as described in the "SNMP Guide for Cisco ICM/IPCC Enterprise" Release 7.0(0) July 2005. It's all there - what can't you follow?
Regards,
Geoff

Similar Messages

  • No Option To Install SNMP Service on Windows Server 2012 Standard

    Hi,
    was wondering if someone could help me with the below issue.
    i am trying to install the SNMP service on our new 2012 server however the role doesn't even exist?
    could someone advice on how we can install this role? i have looked everywhere but am unable to find an answer 
    thanking all in advance 

    the snmp role is being depreciated and replaced by CIM.
    but you should still be able to add it.
    its a feature - from server manager select install roles and features, click through the roles till you get to the features page and select snmp from the list
    Regards,
    Denis Cooper
    MCITP EA - MCT
    Help keep the forums tidy, if this has helped please mark it as an answer
    My Blog
    LinkedIn:

  • Group Policy for configuring SNMP service

    HI,
    I want to configure SNMP service on HP Physical server for communicating with HP SIM server through GPO as need to congifure it on 100 servers.
    Though I have configure a policy but its not working.
    When I configured manually on HP Physical server its working fine but when I tried to implement through GPO, SNMP stops responding to SNMP requests.
    I need a working GPO.
    -- Sandeep Gupta

    Hi Sandeep Gupta,
    Based on my understanding, there were something wrong when you configured the SNMP service via GPO. As Martin said, please provide us the policy you configured to get more help. In addition, please also tell us your OS information.
    I would like to introduce you some knowledge on SNMP settings:
    Based on my experience and research, the
    SNMP settings (including permissions) are stored in the following registry:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SNMP
    Therefore, we can configure a sample computer and then propagate the registry settings to other computers via scripts. Note that, the default ADM file can only
     be used to configure "Read only" settings.
    Regards,
    Lany Zhang

  • Need solution for SNMP Service on Solaris

    Hi Friends,
    We use the solaris servers. For SNMP we have changed the Default Password of SNMP Service.
    We audited our Servers doing the Penetration Testing (PT). In this activity it was reported the SNMP is using the default password. They had the tool "Getif" for SNMP testing. If the default password are set for SNMP service this toll reads the important information. If defaults passwords are not used it cannot read any information about SNMP.
    When i change the default password for SNMP, should i restart the the service to take changes in effect?
    Pls help

    Hi taher;
    Thanx buddy. You are really helping us out. I just try to share my knowledge wiht forums user i also already learn many thing from forums,as specialy Hussein Sawwan
    I have two more doubts. Like in linux we use which command to see if that executable is in the PATH but in Solaris 10 is whence a replacement for that.I belive You can use which command in solaris too.
    Q2). I dont think i need to go for split architecture as both the DB (11i) and application tier are certified for solaris *10* SPARC (64-bit).You should decide it not me :) you can use split config if your business need it or not. Its just depend your analysis
    I hope; my answer would be answer of your quesition and give you some idea about your issue :)
    Regard
    Helios

  • SNMP Service not listed in messaging server Conf Console

    HI
    We are running Messaging Server in Windows NT, in the Messaging server Configuration Console SNMP service is not getting listed.
    Please help in finding out what i am missing, but SMTP service is ruuning mail delivery is working Fine

    Sorry I am not getting SMTP Service in Conf Console please help me

  • Powershell - SNMP Service Install (Server 2008)

    Hello, so this is a follow up to the assistance that was provided to me yesterday about checking to see if the SNMP service was installed across multiple servers.  I was able to gather a list of devices that require the SNMP service to be installed,
    and (thankfully) most of them are Server 2008 machines.  The pre-2008 machines I will just hit manually, since there are less than 20 of them, and to minimize confusion, and a lack of powershell knowledge from my side.
    I have approximately 120 servers that will require the service to be installed onto them, and was looking to do this via powershell.  Luckily, I was able to find this great script online, and I have tested it with my own variables inserted, and it works
    great (for one server, ran manually on it).  I was wondering if somebody could help me figure out how to get the script to do the following two things:
    1.  Install the SNMP service to multiple servers from a text file (I attempted this with the get-content).
    2.  Output the results to either a text file or a csv file (also tried this as can be seen below).
    Here is the script, with what I tried (and failed).  The only two lines of code that are mine, are the very top one and the very bottom one, I will bold them to indicate that.  Thanks for any help that may be offered.
        #Powershell Script To Install SNMP Services (SNMP Service, SNMP WMI Provider)
        Get-Content .\servers.txt
        #Variables :)
        $pmanagers = "MY VARIABLE 1"
        $commstring = "MY VARIABLE 2"
        #Import ServerManger Module
        Import-Module ServerManager
        #Check If SNMP Services Are Already Installed
        $check = Get-WindowsFeature | Where-Object {$_.Name -eq "SNMP-Services"}
        If ($check.Installed -ne "True") {
                #Install/Enable SNMP Services
                Add-WindowsFeature SNMP-Services | Out-Null
        ##Verify Windows Servcies Are Enabled
        If ($check.Installed -eq "True"){
                #Set SNMP Permitted Manager(s) ** WARNING : This will over write current settings **
                reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SNMP\Parameters\PermittedManagers" /v 1 /f /t REG_SZ /d localhost | Out-Null
                #Used as counter for incremting permitted managers
                $i = 2
                Foreach ($manager in $pmanagers){
                        reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SNMP\Parameters\PermittedManagers" /v $i /f /t REG_SZ /d $manager | Out-Null
                        $i++
                #Set SNMP Community String(s)- *Read Only*
                Foreach ( $string in $commstring){
                        reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SNMP\Parameters\ValidCommunities" /v $string /f /t REG_DWORD /d 4 | Out-Null
        Else {Write-Host "Error: SNMP Services Not Installed"}
    | Export-Csv .\SNMP_Install.csv -NoTypeInformation

    here is what the GP settings looks like:
    SNMP Service
    Data collected on: 3/20/2014 10:58:08 AM
    General
    Details
    Domain
    TESTNET.local
    Owner
    TESTNET\Domain Admins
    Created
    3/20/2014 10:53:20 AM
    Modified
    3/20/2014 10:57:54 AM
    User Revisions
    0 (AD), 0 (sysvol)
    Computer Revisions
    3 (AD), 3 (sysvol)
    Unique ID
    {8B82351A-5BF0-47F7-8549-71C2D592FF72}
    GPO Status
    Enabled
    Links
    Location
    Enforced
    Link Status
    Path
    None
    This list only includes links in the domain of the GPO.
    Security Filtering
    The settings in this GPO can only apply to the following groups, users, and computers:
    Name
    NT   AUTHORITY\Authenticated Users
    Delegation
    These groups and users have the specified permission for this GPO
    Name
    Allowed Permissions
    Inherited
    KAHLNET\Domain Admins
    Edit settings, delete,   modify security
    No
    KAHLNET\Enterprise   Admins
    Edit settings, delete,   modify security
    No
    NT   AUTHORITY\Authenticated Users
    Read (from Security   Filtering)
    No
    NT AUTHORITY\ENTERPRISE   DOMAIN CONTROLLERS
    Read
    No
    NT AUTHORITY\SYSTEM
    Edit settings, delete,   modify security
    No
    Computer Configuration (Enabled)
    Policies
    Administrative Templates
    Policy definitions (ADMX files) retrieved from the local machine.
    Network/SNMP
    Policy
    Setting
    Comment
    Communities
    Enabled
    Communities
    public
    Policy
    Setting
    Comment
    Permitted   Managers
    Enabled
    Permitted Managers
    BUILTIN\Administrators
    Policy
    Setting
    Comment
    Traps   for public community
    Enabled
    Trap configuration
    test-trap-1
    User Configuration (Enabled)
    No settings defined.
    ¯\_(ツ)_/¯

  • SNMP Service Timeout Issue

    Hi,
    I am facing SNMP timeout issue with 3 of my Windows Servers (2008 R2 Enterprise Edition). I am using Network Monitoring System to monitor devices. The issue I am facing with these servers is that the NMS is not able to poll CPU and Memory graphs.
    I have restarted the SNMP service many times but no use. I rebooted one server and Its problem is gone. But rest of the two servers are still with the same condition (not rebooted yet).
    I used the "Paessler SNMP Tester" to check the issue but sometimes it passes and mostly gives "No response" or "Timeout".
    I also used "SnmpWalk.exe"  with command 'snmpwalk -r:<server ip> -c:community' but after processing few OID's it gives error "%Failed to get value of SNMP variable. Timeout."
    Can anyone help to identify the problem and how to resolve it?

    Hi Zain,
    Can you try to ping your server with the command "ping your server ip
    -t"? It may be a network issue.
    Besides, is there any warning or error related SNMP in the event viewer of the server? It may give some hints.
    Here is a article about how to troubeshoot SNMP,
    Troubleshooting SNMP
    http://technet.microsoft.com/en-us/library/cc738839(v=WS.10).aspx
    Best Regards.
    Steven Lee
    TechNet Community Support
    Hi Steven,
    Thank you for the response. I tested "SnmpWalk" both locally on the same server and from network as well but the response is same
    "%Failed to get value of SNMP variable. Timeout.". However, I have checked the ping response and it is very much smooth. The server is actually an Active Directory Domain Controller.
    The article you provided above applies to Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2. I have Windows Server 2008 R2 installed on servers.
    Can you provide me the event id for any warning or error related to SNMP for Windows Server 2008 R2? It would be then easy for me to filter the alerts.
    Thank you!

  • Missing agent, trap,security tabs in snmp service tab!

    Missing agent, trap,security tabs in snmp service tab after installing snmp from powershell script!!
    I run the script on win server 2008 and 2012
    Could someone  help..
    Thanks for the help in advance
    Ashwini

    Hi Ashwini,
    To install the snmp service, please refer to the script below:
    #Import ServerManger Module
    Import-Module ServerManager
    #Check If SNMP Services Are Already Installed
    $check = Get-WindowsFeature | Where-Object {$_.Name -eq "SNMP-Services"}
    If ($check.Installed -ne "True") {
    #Install/Enable SNMP Services
    Add-WindowsFeature SNMP-Services | Out-Null
    After installing this service, please try to reboot if you can, and check the tabs, a similar dscussion is for your reference:
    How to configure SNMP on Windows 2008 Server
    If there is anything else regarding this issue, pease feel free to post back.
    Best Regards,
    Anna Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • SNMP service automatic conversion

    Does Windows SNMP service do automatic conversion from SNMPv2 to SNMPv1 ?
    John

    Hi,
    If I doesn’t misunderstand, you are talking about the SNMP traps translation.
     If so please refer the following KB:
    When the Microsoft WinSNMP implementation receives traps from an entity operating under the SNMPv1 framework, it translates the traps to the SNMPv2C format. Therefore, when
    SnmpRecvMsg delivers a trap it is always in the SNMPv2C format. RFC 1908, "Coexistence between Version 1 and Version 2 of the Internet-standard Network Management Framework," specifies the rules for translating from the SNMPv1 to the SNMPv2C trap
    format.
    The related KB:
    Translating Traps from SNMPv1 to SNMPv2C
    http://msdn.microsoft.com/en-us/library/windows/desktop/aa379177(v=vs.85).aspx
    Hope this helps.

  • SNMP and Windows SNMP services

    I am controlling a SNMP device using LabVIEW UDP communication, this works fine. When I start the Windows SNMP services running, I can no longer communicate with the device.
    Is there a way to control an SNMP device with LabVIEW with the Windows SNMP service (Windows XP) running at the same time?
    Davith

    Adam
    Thanks for your comments.
    It looks like the only way forward is to develop a manager interface using Windows SNMP API calls.
    I’ll probably do this by developing a DLL using CVI to interface to the SNMP API. I think its better to use CVI rather than LabVIEW for this. Its easier to interface to the odd data types that Microsoft seems to like using. I will then call this DLL from LV.
    It is a shame that the SNMP Toolit people do not respond to emails. I suspect their code uses UDP calls, as it looks like it was developed before the Windows SNMP API was available.
    Davith

  • How to install snmp service on win2k pro?

    Hi all,
    i can not find snmp service on my computer so i do not know how to start it, can somebody help me, thanks!

    Hi Author 5056,
    I saw your question about snmp on W2K Pro and wanted to know how you were able to properly path out the environment variables under My Computer properties. I have tried everything but still cannot get Sun One Application Server 7 to run.
    Can you help?
    Thanks!

  • SNMP Service in BODS Server

    Hi,
    Whats the use of SNMP in BODS Server and what will be the impact if we will deactivate its configuration?

    If you are using adpaters (webservices) or need to send communications from job server to SNMP agent then check it other wise you can disable it. You could see more details in SAP DS admin guide pg 25 and 87.

  • Get SNMP Tools (not services) installed via a script or GPO

    Hello all,
    I noticed with Windows 2012 R2 SNMP service is installed and running but you need the SNMP tools installed to see the Traps and Security Tabs. Does anyone have a .bat and vbs file that does this? I also, want to setup to configure Community public to read
    write and add host to the accept snmp packets as wll as trap destinations. I have a server call zabbix which I need to enter that server name into those areas.

    Hi k-master,
    Based on your description, I understand that you want to deploy exe tool via
    Group Policy. As I know, exe file can’t be deployed via Group Policy. So, regarding to your target, you can refer to following 2 suggestions.
    Use a computer startup script to run the exe with unattended parameters. Regarding to detailed script, you can post requirement in the
    Script Forum. I believe we will get a better assistance there.
    Get MSI package (convert the EXE to MSI package), then you can deploy the MSI file via
    Software installation setting in group policy. For more details, please refer to this
    KB. Meanwhile, please refer to the following article.
    Set Options for Group Policy Software Installation
    If anything I misunderstand, please don’t hesitate to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Adding IPCC ICM and CVP servers to CUOM

    Hi,
    I want to know how can I add ICM and CVP servers to Cisco Unified Operation Managers. I have read the document and as per that we need to enable and configure SNMP service on servers. But I am unable to start SNMP service on one of ICM server i.e. AW. The below mentioned message is appearing on start of SNMP service. Please advise the best way to add all IPCC servers to CUOM and to get the best possible results from CUOM.
    Regards,
    Hammad.

    "The Microsoft Windows SNMP service for processing SNMP requests is disabled as part of Unified CCE setup and replaced by the Unified CCE SNMP Management service. The Unified CCE SNMP Management service is provided for more sophisticated SNMP capabilities than are offered by the standard Microsoft Windows SNMP service."
    If you look at your Services on your UCCE server you should see the service Cisco Contact Center SNMP Management.
    Take a look at this white paper on the subject....
    http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps6705/ps6535/white_paper_c11-543550.html
    Also, here's the link to the SNMP guide for UCCEv7
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_7_0/configuration/guide/snmp70ug.pdf
    Hope this helps

  • UDP port 161 on IPCC/ICM servers

    I am trying to setup Solarwinds monitoring via SNMP on our IPCC/ICM servers.  The servers are AW, PGs and Router/Loggers. 
    Do the IPCC/ICM applications use UDP port 161?  I cannot start the SNMP service on the servers due to UDP port 161 is already being used. 
    According to Windows task manager, the port is used by PID snmpdm.exe.
    Any info or comment is appreciated.  Thanks.

    Yes it's not the same. Why, I do not know.
    On ICM Windows boxes you use the MMC snapin, but on CVP you use the Ops Console which writes into cfg files and pushes them to the box.
    At the end of the day the basics of community name, access list, trap destination are known by the agent on the ICM or CVP server.
    Regards,
    Geoff

Maybe you are looking for