So I update the software on my 4th generation iPod and it took about ten minutes. Now the iPod won't unlock or lock properly . And it won't turn on unless plugged in. What should I do?
So I got a software update for iPod.. Thinking it would be knowing all it would do is update my iPod so it would work better i pressed accept. I guess I screwed it up because I was using FaceTime when impressed accepted it. A second later it shut off my iPod and began the update which took about ten minutes then it turned back on so I unlock it and immediately called back my friend on FaceTime. After spending two hrs on FaceTime I ended the call and immediately noticed my iPod was acting funny. It wouldn't lock when I pressed the button and it won't take a picture of the screen when I press those two buttons. And when I pressed those two buttons together to turn in off it went straight to voice control and I was like what. It won't turn back on unless plugged in. I don't know what is wrong with it. Enyone have an idea? Please help.
I just got this bcuz my second was beginning not to work this is a used 4th generation but I don't think it was used that long.
Please any information would help.. Thank you
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Similar Messages
-
I'm looking at the dell Inspiron Desktop 4th Generation Intel® Core™ i5 Processor for photoshop work versus the Dell XPS 8700 i7 IS IT WORTH SPENDING THE EXTRA $400? my old desktop is a AMD about 5 years old so there will be a huge change in speed to what I am use to
Here are the specks on both:
Inspiron
Processor
4th Generation Intel® Core™ i5-4460 Processor (6M Cache, up to 3.40 GHz)
Operating System
Help Me Choose
Windows® 8.1 (64Bit) English
Memory2
8GB Dual Channel DDR3 1600MHz (4GBx2)
Hard Drive
1TB 7200 rpm SATA 6Gb/s Hard Drive
Video Card
NVIDIA® GeForce® 705 1GB DDR3
Ports
Front
(2) USB 2.0, MCR 8:1, Mic and Headphone Jacks
Rear
Four USB 2.0 connectors , Two USB 3.0 connectors, HDMI, VGA, RJ-45 (10/100/1000 Ethernet), 3-stack audio jacks supporting 5.1 surround sound
Media Card Reader
Integrated 8-in-1 Media Card Reader
(supports Secure Digital (SD), Hi Speed SD (SDXC), Hi Capacity SD (SDHC), Memory Stick (MS), Memory Stick PRO (MS PRO), Multimedia Card (MMC), Multimedia Card Plus (MMC Plus), xD-Picture Card(XD))
Memory Slots
2 DIMM Slots
Chassis
Bluetooth
BT 4.0 via 1705 WLAN card
Chipset
Intel® H81 PCH
Power
300 Watt Power Supply
XPS 8700
Processor
4th Generation Intel® Core™ i7-4790 processor (8M Cache, up to 4.0 GHz)
Operating System
Help Me Choose
Windows 8.1 (64Bit) English
Choose Options
Memory2
12GB Dual Channel DDR3 1600MHz (4GBx2 + 2GBx2)
Hard Drive
1TB 7200 RPM SATA Hard Drive 6.0 Gb/s
Video Card
NVIDIA GeForce GTX 745 4GB DDR3
CPU Thermal
86W
Graphics Thermal
225W/150W/75W
Power
460W, optional 80 PLUS Bronze, 85% efficient, supply available on ENERGY STAR configurations
Ports
Bays
Support for 4 HDD bays: including (3) 3.5” HDDs
–Capable of 1 SSD and 3 HDD configuration
Media Card Reader
19-in-1 Card Reader (CF Type I, CF Type II, Micro drive, mini SD, MMC, MMC mobile, MMC plus, MS, MS Pro, MS Pro Duo, MS Duo, MS Pro-HG, RS-MMC, SD, SDHC Class 2, SDHC Class 4, SDHC Class 6, SM, xD)
Slots
Memory Slots
4 DIMMFrom my personal experience, I wouldn't go for an Integrated card. This is one of the most important components for Photoshop, so invest in a decent graphics card (ATI or NVidia). It doesn't have to be a really exepensive one - I have been using ATI Radeon with 256MB of RAM on my Dell Studio for almost two years and it still rocks! (even when I work with 3D in Ps CS5 Extended).
I would also invest in more RAM (this can be added easily - I bought extra 4GB as my Studio came with 3GB).
I wouldn't worry about the processor - I'm on Intel Core 2 Duo - and it works very very well, it's very quick which is very important as I'm training Photoshop.
I hope this helps. -
In addition to my iMac, I have a Power Mac G4 (10.4.11 Tiger) which of course is pre-Intel. I can boot up and use for about 5 minutes before the mouse freezes. I believe something is
overheating. What would that be - so I can have repairs done? The machine is the Digital Audio version, M7627LL/A and Serial Number XB******KXQ.
<Edited By Host>Hello USME,
'Tis a common problem on old Macs.
Do as Allan says: open the door and blow out all the dust bunnies. Canned air from Wal-Mart or Radio Shack can be handy (though sort of expensive) especially for blowing through the back of the power supply. A cool Mac is a happy Mac.
Be sure your Mac can breathe. The air intake is on the bottom of the case, so be sure a deep pile rug or too many papers on your desk are not blocking the air supply.
Feel the power supply and the processor with your hand. They should be warm but not hot; if you have to move your hand away, that's too hot!
Check the fan on the power supply, and on the processor if it has one. Take a flashlight and peer in the back of the (Mac) case through the grille; make sure the fan is turning. If it's not, the power supply won't work for long.
Fans are not considered serviceable, though they will succumb to mechanics of determination. A CPU fan is easy and straightforward.
A fan replacement will not cure an already damaged power supply; the PS may already be done for. Used power supplies for a DA are hard to come by, and not especially cheap when found (c.$50). An entire working DA or Quicksilver may often be found for under $100 on eBay, and swapping in your HD is easy and simple... this might be cheaper and more expeditious than repairing an expired DA. Replacing a power supply is fairly easy, but it's a nuisance and requires a 2mm Allen head wrench in addition to the usual #2 Phillips head screwdriver.
In my experience, power supplies and CPUs are about equally likely to fail. There are a few other possibilities, but they are not nearly so common.
Good luck!... Jon -
Plzz help
Try:
- A reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings -
I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help > updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera Raw is only version 7.1. I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW! Please Help!
Did you fix your issue? I am having the same one
-
I am attempting to update the software on my 3rd generation ipod touch. I understand I need to erase and restore my device first. Must I do this with it plugged into my pc?
All you have to do is connect the iPod to our computer and update via iTunes. You do not have to seperately erase and restore the iPod. That is done automatically as part of the update process.
To update see:
iOS 4: Updating your device to iOS 5 or later
You need iTunes 10.5 or later on the computer. Y will go to iOS 5.1.1. the last update fopr the 3G -
My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?
I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry. -
I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.
Then put a SIM in. You cannot activate an iPhone without a compatible Sim.
If your iPhone was hacked/jailbroken the update restore the lock. -
How do I update the software on a first generation ipod touch so I can dowload apps?
How do I update the software on a first generation ipod touch? I'd like to download apps onto it.
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
-
I have an I Pod Nano and would get messages to update my software. In my I Tunes I have 1,900 songs but after the updates it will only sync 933 songs. My current software version is 1.0.2. What am I doing wrong or is it something in the software. I have not done anything different in my I Tunes and all songs are checked. Could someone please help or advise me what to do?
Thank you Gail, but not to be ignorant but can I send you a print screen on what I am looking at. I will try am explain what I see: I hooked up my I Pod Clicked on Music checked Sync Music 1909 Songs select Playlist, Artists, albums, and genres checked Include music videos Playlists checked 50's Music checked 70's Music checked 80's Music checked 90's Music checked 2000 Music checked 2010 Music These are songs that I downloaded onto my I Tunes. I bought me a new computer but when my data was transferred from old computer to new computer a lot of my songs on my hard drive were lost, but they were able to save all my songs on I tunes. My I Pod is still connected Clicked on "On this Ipod" Music 938 Songs 2.2 days So my question to you is if I have 1,909 songs on my ITunes how come only 938 transferred to my IPod. I checked my IPod and it shows only 938 songs transferred. This did not happen before until I Tunes asked me if I wanted to update to a newer version. Last month I did have all my 1,909 songs on my I Pod. I hope this explains what I am asking
-
I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I have iphone3gs current software ver. is 4.2.1 and it cannot update to software version 4.3. Please help me. I tried to restore the settings of my iphone but still no work. im using the current ituned 10.4. Second, I cannot connect to all wifi networks
But the model no. of my iphone i.e A1303 is of 3GS as clearly mentioned here >> http://support.apple.com/kb/HT3939. Then how its become 3G.
-
BF tried to update to ios6 on iphone 4 but crashed half way through saying it needed to plugged into iTunes and then restored so after it was 'restoring' he had an error message come up say to couldn't be restored....what should be do next as the phone is in a complete non working condition
Spent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
End result, a successful restore to factory settings and a happy 14 year old.
Hope this helps others. -
How do I update my I pod touch 4th generation on the new version of itunes
How do I update my I pod touch 4th generation on
The new verstion of iTunes ?If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices is listed.
-
My ipod wont charge ive try everthing when i plug it in to the computer nothing happen but before that it was full charge and 5 mins after that it was 10% and tried charging it nothing but now the screen is blank...So what should i do?
- See:
iPod touch: Hardware troubleshooting
- Try another cable
- Try another charging source
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
I had the replacement hard drive installed and the tech said he left the password open. My old password does not work. I can use the computer, but I cannot log in to add new wireless devices or to download programs. I recently tried to download Ad
-
Can't use updater; iTunes does not open when I plug in myiPod nano
I am not a cdomputer wizard, so please don't get too technical with your answers. I just received an iPod nano 4GB and installed the software CD; I plugged the nano in using the USB cord but iTunes did not open.I tried doing the updater (9/05) but th
-
Initialized values for Init blocks disappear at random
Hi everyone I have a strange scenario and would appreciate your help with some ideas on how to troubleshoot this. We have OBIEE 10.1.3.4. It is a BI Apps 7.9.6.1 environment and OBIEE is integrated with EBS. Everything is working 100% fine and all in
-
Oracle 11g automatic archival // maintaining historic data
Hi Group, We are planning to get Oracle 11g. I want to know if Oracle 11g has the capability to do automatic archival? My requirement is, few of the tables in our application will have lot of records (data) and after some days/ months it might slog t
-
Configuration SAP Solution Manager TCode-SOLMAN_SETUP Initial Configuration
Hi, I am running the TCode: Solman_Setup for Basic Configuration in Solman 7.0 EHP1. In "Initial Configuration" -> Technical Configuration after clicking Configure button facing following error. Pls Suggest. System SM1 does not exist & E::000 Regards