Soa suite 11.1.1.5 installation steps in linux 64 bit machine

Hi Everybody,
I am installing SOA suite as follows:
Redhat Linux Machine(64 bit):
jdk:jdk1.0.6_26(as root user)
rcu:as oracle user
weblogic :as oracle user
soa suite 11.1.1.5:as oracle user
Will it be problem for user?Because i have installed jdk as root user.
With Regards
Jyoti
Edited by: Jyoti on Aug 18, 2011 10:18 AM

Below the Retry button,
The above mentioned two prerequisites are not marked as tick(i think warning sign).But
Checking for glibc-devel-2.5-x86_64;Not found.Failed
Checking for glibc-devel-2.5-12-i386_64;Not found.Failed
Checking for libaio-devel-0.3.106;Not found.Failed
and many more failures.
So Overall result of this check is:Failed
Inside Kernel Parameters:
Checking for hardnofiles=4096;hardnofiles=1024.failed
Checking for hardnofiles=4096;hardnofiles=1024.failed
Check complete.The overall result of this check is:failed
Problem:The kernel parameters do not meet the requirements(see above).
Recommendation: Perform operating systems specific instructions to
With Regards
Jyoti

Similar Messages

Oracle db 11.1.0.6 installation on a linux 64 bit machine failed

This only happens with silent install. The GUI installation steps were fine. Would appreciate your help. Many thanks.
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0x0000002a959378a4, pid=6689, tid=182894250336
# Java VM: Java HotSpot(TM) 64-Bit Server VM (1.5.0_11-b03 mixed mode)
# Problematic frame:
# V [libjvm.so+0x3a98a4]
# An error report file with more information is saved as hs_err_pid6689.log
In
--------------- T H R E A D ---------------
Current thread (0x0000000040118870): JavaThread "main" [_thread_in_vm, id=6689]
siginfo:si_signo=11, si_errno=0, si_code=1, si_addr=0x0000000000000000
Registers:
RAX=0x0000000040118c60, RBX=0x0000000040119048, RCX=0x0000000040118b20, RDX=0x0000002a9558c960
RSP=0x0000007fbfffb920, RBP=0x0000007fbfffb980, RSI=0x0000000040118c70, RDI=0x0000000000000001
R8 =0x0000002a95defbb0, R9 =0x00000032b2f10280, R10=0x0000000000000010, R11=0x0000002a95defbb8
R12=0x0000000000000000, R13=0x0000002a95df34b0, R14=0x0000000000000000, R15=0x0000000040118870
RIP=0x0000002a959378a4, EFL=0x0000000000010246, CSGSFS=0x0000000000008870, ERR=0x0000000000000004
TRAPNO=0x000000000000000e
Top of Stack: (sp=0x0000007fbfffb920)
0x0000007fbfffb920: 0000000040118b20 0000000040118c60
0x0000007fbfffb930: 0000000040118c70 0000000040119048
0x0000007fbfffb940: 0000000040118870 0000000040118870
0x0000007fbfffb950: 0000000040118870 0000002a9cb5ae78
0x0000007fbfffb960: 0000002a9cb5ae78 0000002a99331540
0x0000007fbfffb970: 0000002a9cb5ae78 0000007fbfffba50
0x0000007fbfffb980: 0000007fbfffb9d0 0000002aafc02db0
0x0000007fbfffb990: 0000000040118870 00000000401190e0
0x0000007fbfffb9a0: 0000000040118870 00000000401190a8
0x0000007fbfffb9b0: 0000007fbfffba48 0000000000000000
0x0000007fbfffb9c0: 0000007fbfffba38 00000000401189c0
0x0000007fbfffb9d0: 0000007fbfffba28 0000002a99331562
0x0000007fbfffbb10: 0000000000000000 0000002a9cb66b20
Instructions: (pc=0x0000002a959378a4)
0x0000002a95937894: 48 8b 71 10 48 89 75 b0 48 8b 59 18 48 89 5d b8
0x0000002a959378a4: 49 8b 3c 24 e8 f3 c5 fd ff 48 89 c7 49 89 c4 e8
Stack: [0x0000007fbfe00000,0x0000007fc0000000), sp=0x0000007fbfffb920, free space=2030k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [libjvm.so+0x3a98a4]
C [liboraInstaller.so+0x2db0] Java_oracle_sysman_oii_oiip_osd_unix_OiipuUnixOps_chgrp+0x35
j oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.chgrp(Ljava/lang/String;Ljava/lang/String;)I+0
j oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.changeGroup(Ljava/lang/String;)Z+19
j oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.writeInvLoc(Loracle/sysman/oii/oiic/OiicSessionInterfaceManager;Ljava/lang/String;Ljava/lang/String;[Ljava/lang/String;)V+86
j oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.updateInventoryLoc(Loracle/sysman/oii/oiic/OiicSessionInterfaceManager;Ljava/lang/String;Ljava/lang/String;)V+42
j oracle.sysman.oii.oiic.OiicSessionInterfaceManager.doInvSetupOperations(Ljava/lang/String;Ljava/lang/String;)I+21
j oracle.sysman.oii.oiic.OiicSilentInterfaceManager.doInvSetupOperations(Ljava/lang/String;Ljava/lang/String;)I+3
j oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(Z)I+73
j oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(Z)I+249
j oracle.sysman.oii.oiic.OiicPullSession.doOperation(Z)I+11
j oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(Z)I+100
j oracle.sysman.oii.oiic.OiicInstaller.run()V+48
j oracle.sysman.oii.oiic.OiicInstaller.runInstaller([Ljava/lang/String;)I+107
j oracle.sysman.oii.oiic.OiicInstaller.main([Ljava/lang/String;)V+6
v ~StubRoutines::call_stub
V [libjvm.so+0x385265]
V [libjvm.so+0x567cc9]
V [libjvm.so+0x385075]
V [libjvm.so+0x3b26f5]
V [libjvm.so+0x3a3605]
C [java+0x1fd6] strcmp+0x796
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.chgrp(Ljava/lang/String;Ljava/lang/String;)I+0
j oracle.sysman.oii.oiip.oiipg.OiipgBootstrap.changeGroup(Ljava/lang/String;)Z+19
j oracle.sysman.oii.oiic.OiicSilentInterfaceManager.doInvSetupOperations(Ljava/lang/String;Ljava/lang/String;)I+3
j oracle.sysman.oii.oiic.OiicInvSetupWCCE.doOperation(Z)I+73
j oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(Z)I+249
j oracle.sysman.oii.oiic.OiicPullSession.doOperation(Z)I+11
j oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(Z)I+100
j oracle.sysman.oii.oiic.OiicInstaller.run()V+48
j oracle.sysman.oii.oiic.OiicInstaller.runInstaller([Ljava/lang/String;)I+107
j oracle.sysman.oii.oiic.OiicInstaller.main([Ljava/lang/String;)V+6
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x0000002aaaf6e930 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=6699] 0x0000002aaaf6cd00 JavaThread "CompilerThread1" daemon [_thread_blocked, id=6698]
0x0000002aaaf6b750 JavaThread "CompilerThread0" daemon [_thread_blocked, id=6697] 0x0000002aaaf69ff0 JavaThread "AdapterThread" daemon [_thread_blocked, id=6696]
0x0000002aaaf68c20 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=6695] 0x0000002aaaf54ca0 JavaThread "Finalizer" daemon [_thread_blocked, id=6694]
0x0000002aaaf54470 JavaThread "Reference Handler" daemon [_thread_blocked, id=6693] =>0x0000000040118870 JavaThread "main" [_thread_in_vm, id=6689]
Other Threads:
0x0000002aaaf4ff70 VMThread [id=6692]
0x0000002aaaf70580 WatcherThread [id=6700]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
PSYoungGen total 6656K, used 1356K [0x0000002aa7bf0000, 0x0000002aa88f0000, 0x0000002aaadf0000)
eden space 6144K, 22% used [0x0000002aa7bf0000,0x0000002aa7d43280,0x0000002aa81f0000)
from space 512K, 0% used [0x0000002aa81f0000,0x0000002aa81f0000,0x0000002aa8270000)
to space 512K, 0% used [0x0000002aa8870000,0x0000002aa8870000,0x0000002aa88f0000)
PSOldGen total 5696K, used 1740K [0x0000002aa17f0000, 0x0000002aa1d80000, 0x0000002aa7bf0000)
object space 5696K, 30% used [0x0000002aa17f0000,0x0000002aa19a33c8,0x0000002aa1d80000)
PSPermGen total 21248K, used 8198K [0x0000002a9c3f0000, 0x0000002a9d8b0000, 0x0000002aa17f0000)
object space 21248K, 38% used [0x0000002a9c3f0000,0x0000002a9cbf1938,0x0000002a9d8b0000)
Dynamic libraries:
40000000-4000e000 r-xp 00000000 ca:01 9979579 /tmp/OraInstall2011-03-15_04-57-28PM/jdk/jre/bin/java
4010d000-40110000 rw-p 0000d000 ca:01 9979579 /tmp/OraInstall2011-03-15_04-57-28PM/jdk/jre/bin/java
40110000-40155000 rwxp 40110000 00:00 0
40155000-40156000 ---p 40155000 00:00 0

Of course not. I first tried with silent install, it did not work. Then I tried GUI install, and it worked. Later, I tried to uninstall the previous GUI install, then tried again with silent install, it failed with the same error.I think you should go with GUI installation, but if you do want to test the silent, i guess you need to re-build the VM,
You can try again after re-starting the virtual machine and see if it works.

SOA Suite Installation on Linux 64 bit machine

Hi,
I have to install Oracle SOA Suite 11.1.1.5 on a Linux 64 bit machine. I want to install Oracle SOA Suite 11.1.1.5 version on the machine because any version above will not be supported on my machine. Here is the list of components I want to install.
1. Oracle Database
2. Weblogic server
3. RCU
4. SOA Suite
5. JDeveloper extension
7. BPM extension
8. Oracle Service Bus
Can anybody tell me where can I get the downloadables for these components for Oracle SOA Suite 11.1.1.5 which is Linux 64 bit compatible. I searched the Oracle website but can't find it anywhere? I also looked at edeilivery site of oracle, but no luck. However, if anybody has the URL's to directly download it, then please share.
Thanks,
Saurabh G

Anuj,
Thanks for your response. I can't raise an SR with Oracle since I am learning this on my own.
However to answer your question, I am using Processor AMD, 1.6GhZ with 4 GB RAM.
I have made my system dual boot with Windows 7 and Suse Linux 12.3, both 64 bit operating systems
I have tried to install 11.1.1.6 on my system on windows but the installation got hanged. And when I went for 11.1.1.5 on windows, the installation was smooth and I have it installed on windows7. But now I want to learn to install it on Linux machine also thats why I am asking for 11.1.1.5 downloadables.
Thanks,
Saurabh G
Edited by: Saurabh G on 03-May-2013 22:11

Issue with OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine

Hi
I'm following the below steps to install OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine. However the installation is unsuccessful as it fails at the "Domain Creation" step. It would be very helpful and greatly appreciated if any workaround is provided. Thanks!
1.JRockit Windows 64 bit Version jrockit-jdk1.6.0_24-R28.1.3-4.0.1-windows-x64
2. Oracle 11G Database
3. RCU Installation
4. WebLogic 10.3.5.0 Generic Version
5. Weblogic patch
6. OBIEE 11G 64 bit version (11.1.1.5). Software only
7. Execute Configure.bat in :\Middleware\Oracle_BI1\bin
Thanks

Hi,
Kindly refer my blog link:
http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
from exp..with obiee11g installation with win 7 64bit i have face so many issues..
http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
obiee11.1.1.5.0(Software Only Install) windows 7 64bit Installation Error
OBIEE11g software only install configuration get hangover on win 2008 64
==========
Note: some time it works with simple install option then rebooting mechine/restarting mechine it's not working.then i had OWC and discussed with MY Oracle Support team...they confirmed it's not support. please refer the certification matrix excel file in my blog link
Hope it's clear...
Thanks
Deva
Edited by: Devarasu on Nov 25, 2011 11:18 AM

ODI installation guide and setup requirement for Linux 64 bit machine

Hi,
I need to install ODI on linux 64 bit machine.
Kindly provide me the steps and the link to software that are required to be downloaded.
Thanks.

In OBIEE I have used weblogic server. localhost:7001/em is required to deploy repository.
On my local machine I have installed ODI weblogic server. It is also taking localhost:7001/em to show the ODI-DOMAIN.
If I install it for both ODI and OBIEE will I face any conflict issues.
What should I do???
Thanks.

SOA Suite 11.1.1.3 installation - RCU question

Hi,
I installed SOA Suite 11.1.1.3 using the following steps:
1. Installed XE database
2. Created RCU - 11.1.1.2.1 using prefix "DEV"
3. Created RCU - 11.1.1.3 using prefix "DEV1"
3. Installed WLS 10.3.3 full install
4. Installed SOA Suite 11.1.1.2.0 in the middleware home created in Step 3
5. Upgraded SOA Suite from 11.1.1.2 to 11.1.1.3
My questions are:
1. Have I followed the correct steps? I did not receive any errors while installing.
2. Which RCU will be used by SOASuite 11.1.1.3? Schemas prefixed with "DEV" or schemas prefixed with "DEV1"? Is there a way I can check this information?
Thanks in advance.
Rgds,
Suhas.

Hi,
I successfully installed SOA Suite 11.1.1.3 too on windows 2003server
I first Installed oracle database11.2.0.2
then Created RCU - 11.1.1.2.1 using prefix "DEV",but no use the RCU 11.1.1.3
after Installed WLS 10.3.3 full install
Finally Installed SOA Suite 11.1.1.2.0 in the middleware home created in Step 3
and Upgraded SOA Suite from 11.1.1.2 to 11.1.1.3
so we hava the same steps.I run the em and console successful,and all the soa Components are run Operating normally!
and I found not any different between RCU 11.1.1.2.1 and RCU 11.1.1.3 on install soa suite.
I want to know you to Exchange our soa Experience!

Oracle E-Business Suite R12 Installation Steps on Linux

I am new to Linux and have installed a clean install at home of Oracle Unbreakable Linux.
Now, my purpose is to install and use Oracle E-Business Suite Release 12.0.4 (Vision) to grow my knowledge.
Questions
1. Do I download all the files in edelivery.oracle.com under 'Oracle E-Business Suite Applications Release 12.0.4 Media Pack for Linux x86'?
2. I know, there is another thread on Installing on Windows XP with great instructions. Anyone know what steps I take after downloading the above referenced package?
Thank you!

1. Do I download all the files in edelivery.oracle.com under 'Oracle E-Business Suite Applications Release 12.0.4 Media Pack for Linux x86'?You need to download the following:
From: Oracle Applications Release 12.0.4 Rapid Install Start Here, Part Number: V11935-01
To: Oracle Applications Release 12.0.4 for Linux x86 Rapid Install APPL_TOP - Disk 2, Part Number: V11932-01
2. I know, there is another thread on Installing on Windows XP with great instructions. Anyone know what steps I take after downloading the above referenced package?Refer to Note: 402310.1 - Oracle Applications Installation and Upgrade Notes Release 12 (12.0) for Linux (32-bit)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=402310.1

Oracle SOA Suite 10.1.3.4 (OC4J) HA cluster installation on RH Linux 64 bit

We plan to install Oracle SOA Suite 10.1.3.4 (OC4J) HA cluster on Red Hat Linux 64 bit operating system.
Are there any special instructions for 64 bit install compared to regular 32 bit install?
Any inputs will be really helpful.
-Thanks
VJ

Yes there is some additional steps
if you are doing clustering this should be your bible
http://download.oracle.com/docs/cd/E10291_01/core.1013/e10294/toc.htm
to install 64bit have a look at these references
http://download.oracle.com/docs/cd/B31017_01/getstart.htm
Metalink note 465159.1
cheers
James

Could some on provide OBIEE11.1.1.5.0 installation steps in AIX 64 bit

Hi ,
I am new to OBIEE and we have requirement of OBIEE 11.1.1.5.0 installation in AIX 6.1 64bit. Could some one guideprerequisite details and installation steps.
Thanks
Venkatesh

Hi,
Refer below link:
http://obibb.wordpress.com/2010/11/16/installing-oracle-bi-11g-r1-windows-server-2008-r2-64bit/
http://onlineappsdba.com/index.php/2011/05/01/obiee-11g-installation-high-level-steps/
http://gerardnico.com/wiki/dat/obiee/installation_11.1
http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
Thanks
Deva

Issue with Oracle service bus installation on Windows 7 64 bit machine

Hi,
I am trying to install Oracle service bus 11.1.1.4 in Windows 7 64 bit machine for which i have downloaded the generic installers of both weblogic server and Oracle service bus. As per the instructions -
1. Install JDK 1.6
2. Install Weblogic server
3.Install Eclipse separately (In my case Galileo 11.1.1.5 64 bit) - Just unzip the contents in the home directory where weblogic server is installed
4. Install OSB
I have installed all the above 1,2,3 in the same folder as per the instructions. But when i try to install OSB which asks for eclipse home location. But when i give the eclipse home location, it gives an error ""Home location is invalid" and i am unable to proceed with the installation.
I have tried this with OSB 11.1.1.5 as well and have the same issue.
Does anyone has any links which provides the steps to install OSB in Windows 7 64 bit machines or if someone can help me to resolve the above issue ?
I really appreciate any information on this as it is urgent.
Thanks

I have installed OEPE 11.1.1.6.1 now in the same middleware home as weblogic server but when i try to install OSB 11.1.1.4 in the same middleware home, it asks for OEPE home location. Even though i provide the OEPE home location , it displays as "invalid oepe home location".
I have been struggling to get this sorted out so that i can carry out IDE development in OSB 11.1.1.4
Below are the paths where sfotware are installed -
JDK - C:\Oracle\Middleware\Java\jdk1.6.0_21
Weblogic server - C:\Oracle\Middleware\wlserver_10.3
OEPE - C:\Oracle\Middleware\oepe-galileo-all-in-one-11.1.1.6.0.201007221355-win32-x86_64
Thanks

OBIEE Installation Steps on LINUX

Hi Folks,
We are implementing OBIEE on Linux box. So obviously, Oracle Business Intelligence Admin Tool needs to be installed in Windows environment.
So my doubt is, should I install only Oracle Business Intelligence Admin Tool component in Windows environment and rest of the all components in Linux box?
or
Can I install all the components in Windows environment and rest in Linux box.
Regards
Cooper
Edited by: user614885 on Dec 4, 2010 12:16 PM

cooper,
Read this : http://onlineappsdba.com/index.php/2008/08/26/obiee-step-by-step-installation/
Dont forget to close the thread by assigning points u have opened 18threads but u closed only one thread
Refer : http://forums.oracle.com/forums/ann.jspa?annID=939
Thanks,
Saichand.v

Issue starting the soa suite 11g- windows 7 64bit

Hi all,
After successfull installation of oracle soa suite 11g 11.1.1.3 in my windows 64 bit machine, im unable to start the weblogic server
pls find the log details.
C:\Oracle\Middleware\home_ps2\user_projects\domains\domain1>startWebLogic.cmd
** Setting up SOA specific environment for win...
PATH=C:\Oracle\MIDDLE~1\home_ps2\patch_wls1033\profiles\default\native;C:\Oracle
\MIDDLE~1\home_ps2\patch_ocp353\profiles\default\native;C:\Oracle\MIDDLE~1\home_
ps2\WLSERV~1.3\server\native\win\x64;C:\Oracle\MIDDLE~1\home_ps2\WLSERV~1.3\serv
er\bin;C:\Oracle\MIDDLE~1\home_ps2\modules\ORGAPA~1.1\bin;C:\PROGRA~1\Java\JROCK
I~1.1\jre\bin;C:\PROGRA~1\Java\JROCKI~1.1\bin;C:\oraclexe\app\oracle\product\10.
2.0\server\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Pr
ogram Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Windows\system32
;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\
;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCo
mmon\;c:\Program Files\WIDCOMM\Bluetooth Software\;c:\Program Files\WIDCOMM\Blue
tooth Software\syswow64;C:\Program Files (x86)\Common Files\Roxio Shared\DLLShar
ed\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files (x86)\Windows Li
ve\Shared;C:\Oracle\MIDDLE~1\home_ps2\WLSERV~1.3\server\native\win\x64\oci920_8;
C:\Oracle\Middleware\home_ps2\Oracle_SOA1\soa\thirdparty\edifecs\XEngine\bin
USER_MEM_ARGS=-Xms768m -Xmx1536m
JAVA_OPTIONS= -Xverify:none
** End SOA Specific environment setup for win.
** SOA specific environment is already set. Skipping ...
\Java\jre6\lib\ext\QTJava.zip was unexpected at this time.
pls help solving the issue.
Regards,
karthik

Issue is with your system's CLASSPATH setting. Answered here -
JDeveloper 11.1.1.1.0 - cannot start embedded wls
Regards,
Anuj

Oracle SOA Suite JVM not initializing due to heap issue

Hi,
I have installed Oracle SOA Suite 11g (11.1.1.3) on Windows XP 32 bit machine. The machine has 4 GB RAM and I have increased the virtual memory of the Windows machine to 9 GB. However, I am getting this error while trying to start the SOA WL server with 1024 MB max JVM heap size. The WL server is starting when I am reducing the max JVM heap size to 512 MB. However, this is not sufficient for the SOA server.
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.

http://blogs.oracle.com/christomkins/2010/05/soa_suite_11g_unable_to_start.html
Regards,
Anuj

Installation of soa suite on window8, 64 bit

Hi Guys,
i wan to install Oracle soa suite 11.1.1.5.0 on windows -8 64 bit system, please help me on this ,instlletion steps and which jdk we need for soa home and all
Thank you In Advance..................
Venkat

Hi,
Better option is to use a Pre-built Virtual Machine... Have a look at the link bellow...
http://www.oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html
Cheers,
Vlad

SOA Suite 11g TP3 + Update 1 on Vista

Hi,
A few weeks ago I installed SOA Suite 11g TP3 on a Vista pc and completed the SOAHello application.
On a recent 11g preview I did another tutorial for which it was advised to install TP3 + update 1. This time configuration of SOA Suite took 11 minutes instead of the usual 7 to 8 minutes. However, the message "Build successful" appeared. I created a composite containing BPEL, ran it and started the SOAConsole. The SOAConsole appeared, however the deployed application could not be found. Anyone had similar problems?
I recently installed SOA Suite 10g on Vista. There is a Metalink note (note 444112.1) providing some additional steps on installing SOA Suite 10g on Vista. When I perform these steps, mainly disabling IPv6, SOA Suite 11g TP3 + update 1 installs correctly and the application is visible in SOAConsole.
Regards, Ronald

Well in our case it was pretty reproducable. A colleague also installed and configured JDeveloper 11g TP3 (without update 1) on Vista. The composite deployed, ran and showed in the SOA Console without any problems. Same for me.
However, when I "upgraded" too update 1 (did this a couple of times), every time preconfiguration took too long but succeeded, deployment worked, but no composite was shown in the SOA Console. When I performed the configuration steps for installing SOA Suite 10g on Vista (see Metalink note), JDeveloper 11g TP3 + update 1 worked for the composite and showed in the SOA Console the first time.
Regards, Ronald

Soa suite 11.1.1.5 installation steps in linux 64 bit machine

Similar Messages

Maybe you are looking for