SOAP to RFC result is not Mathcing The Actual RFC Result!

Greetings PI Experts,
I have a very simple webservice which runs a custom function module to look up vendor details based on a number. When I run the RFC in R3 system it gives the correct result I expect, However, it always give (Vendor Not Exist) when executing via SOAP webservice .
any tips?

Hello,
I had the same problem on my project and cause was in request data formating.
For example, we have in SAP system customer (defined in system like 8 digits field) 123456 and when getting detail through BAPI in SAP all is fine. But when execute request to this BAPI through Web Service it expect data in 00123456 format (and for 123456 i got 'No customer exist' message).
If your data have char type problem can be in leading blanks.
So check in debugger in which format BAPI expect data and format you request data.
BR,
Dzmitry

Similar Messages

I've changed my keyboard language to a forieng language and when MacBook sleep I could not type the actual password in US language

I've changed my keyboard language to a forieng language and when MacBook sleep I could not type the actual password in US language.. Try alot but no language change key

What language did you change it to exactly?

When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card

When using rabbitmq-jms for vFabric RabbitMQ javax.jms.Message.getJMSDestination does not return the actual destination when it is received from a consumer listening on a Topic with a wild card. I have tested with both 1.0.3 and 1.0.5 clients with RabbitMQ 3.1.5.
I was wondering if the community was aware of this problem and if there are any workarounds? If not what is the proper channel to file a bug report. An example code snippet is below. The test fails because the TextMessageMatcher expects the destination passed in on construction (second parameter) to equal the desination on the message received (aquired from getJMSDestination).
        Mockery context = new Mockery();
        final MessageListener messageListener = context.mock(MessageListener.class);
        final Latch latch = new LatchImpl();
        final String prefix = "test" + System.currentTimeMillis();
        context.checking(new Expectations() {
                oneOf(messageListener).onMessage(with(new TextMessageMatcher("MSG1", prefix + ".1234")));
                will(new CustomAction("release latch") {
                    @Override
                    public Object invoke(Invocation invocation) throws Throwable {
                        latch.unlatch();
                        return null;
        final Connection connection = createConnection(null, null);
        Session session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
        connection.start();
        Topic wildcardTopic = (Topic) getInitialContext().lookup(prefix + "." + "#");
        Topic destination = (Topic) getInitialContext().lookup(prefix + ".1234");
        final MessageConsumer consumer = session.createConsumer(wildcardTopic);
        consumer.setMessageListener(messageListener);
        MessageProducer producer = session.createProducer(null);
        producer.send(destination, session.createTextMessage("MSG1"));
        latch.await(5000);
        connection.close();
        Thread.sleep(5);
        context.assertIsSatisfied();

Check where your MDB sends the [response] messages to.

The new iTunes 12 does not have a rent tab. I've downloaded two movies which appear in the Movies folder on my Windows Explorer but not in the actual iTunes programme itself. Completely frustrating!

The new iTunes 12 does not have a rent tab. I've downloaded two movies which appear in the Movies folder on my Windows Explorer but not in the actual iTunes programme itself. Completely frustrating! Where can I find these two movies to watch? It asked me once it was downloaded if I wanted to watch it but I wasn't ready to and now can't find where to play these again.

When iTunes/iPod sync process failed due to timeout, the iPod, has only the initilaised filesytem structure at the start of the Sync.
The timeout failure could be due to
Bad hardisk - do the iPod disk diagnostic, refer to this excellent post by tt2
Slow USB port or resource - Dont use any USB hub, disconnect all other USB devices while syncing
Timeout due to Antivirus or other plugins - disconnect from Internet and stop the Antivirus or monitoribng software if you are syncing.
Preferably stop doing other things while syncing this ancient device, which the latest iTunes designer, think will soon be extinct.
Have a nice day!

I am adding a voice over - it plays when I am in "clip trimmer" mode but NOT in the actual movie ... frustrating - any help?

I am adding a voice over - it plays when I am in "clip trimmer" mode but NOT in the actual movie ... frustrating - any help?am in

In Finder you will find the voiceover in the project's package contents folder. If on your internal drive, the project will be in your User (Home) folder Movies/iMovie projects. If on an external drive it will be in the iMovie Projects folder at the top (root) level of the drive.
Right-click (or Control-click) on the project name and select Show Package Contents from the pop-up menu. There should be a file named something like Voiceover Recording.caf in the package contents folder. Copy and paste this .caf file to the Desktop. See if it will open in QuickTime, GarageBand or another program capable of editing audio, such as MPEG Streamclip or Audacity (both free). If it will open, save (export) it in a different format, such as AIFF, preferably to a location where it will not be moved, such as iTunes.
Now drag that file into iMovie to the desired position (if in iTunes drag from iMovie's music browser panel). Hopefully it will now play correctly.
John
Message was edited by: John Cogdell

Date modified/Date Created/Date Added(timestamp) - not showing the actual date?

In finder, none of the date info seems to be accurate.
By example, I just downloaded a new app from a website (onyx in this case), todays date is Nov 13th and when I install the new app (i.e. drag and drop into Apps folders) in finder the Date modified says Nov. 1st, Date created says October 31. Should one of these columns not reflect the true date that the app actually got onto my mac? I understand that one of these clumns probably relfects the info contained within the downloaded app, but surely one column can tell me that I installed this app on November 13! The "Last opened" columns is the only "accurate" date column I have. (as I write this however, i've noticed that the 'Date Added column does say "Today").
I gues my question is what columne reflect what the file itself has imbedded in it, and what relfects the actions i've done (I.e. installed the app on Nov 13)
Any help would be very much appreciated. Note sure if this is somehting more worrisome or not, but i've had it for a while with no major issues other than frsutration of not understanding this. i'm on 10.7.2

The Date Modified column for the Applications folder itself will reflect the actual installation date. The others aren't supposed to.
(61530)

The errors are not on the actual browser

Some errors which are actually not there in actual browser are visible in Adobe Browserlab and vice versa.

Similarly to what I replied on your other post, I'm sorry to hear you're having problems. We are striving to make our capture utilities perform identically to the browsers themselves, but sometimes issues do slip past us and we appreciate hearing about them. Can you provide a URL that shows an example of where you're seeing this behavior?
Thanks,
Mark

Lock Screen notification center - I want messages to show in the N/C but not on the actual lock screen itself. Any way to do this?

In ios7, is there any way to have incoming text messages show up in the notification center on the lock screen but not pop up on the actual lock screen itself? I cant get this combination to work and it seems like it shoud. The text notificaitons do not show at all on the L/S notification center unless I choose the allow on lock screen option. But this not only puts it in the L/S notification center but also adds it to the lock screen itself. I dont want it to do both.

Your email accounts will not actually be reset. The only things that will get reset if you hit reset settings will be your homescreen and lockscreen (your pictures will still be on your phone they just default back to the initial ones), the size of your text, the sounds you use for text messages and ringtones (any of the ones that you have specifically customized for certain contacts will not be reset it's only the ones that you use for yourself) and a couple other minor things. None of the apps that you have to set up personall as in facebook or twitter will reset. I really recommend do this, nothing major will get reset on the phone it's just some minor settings. Just make sure to hit 'Reset All Settings' and NOT 'Reset All Content And Settings'.
I've also tried it with messages app specifically after I hit 'Reset All Settings' and it works like a charm. No messages pop up on my screen but I can access and preview in the notification center without having to unlock my phone.

BUG!!! Captured footage is not 100% the actual device after importing.

This has happened with version 8 and 9. Some of the footage did not get imported from the camera, When comparing the recorded video at the camera connected to a TV with the imported one using iMovie 8 or 9 some slight differences are detected, Murphy's law is always present and the slight difference happens to be the most important part of the footage. I have tried different importing conditions but I get the same result every time. This error does not occur when using iMovie 6 HD which imports the whole footage as recorded by the camera. iMovie 6 HD won't delete unwanted footage from the project making it bigger all the time, that's one of the advantages the new iMovie 8 and 9 has. It becomes very annoying working with two different softwares in order to get the complete footage and then deleting the parts with the other, not to mention the loss of quality form converting from one to the other. I haven't seen any discussions about this matter, I wonder... how can I report this to Apple in order for them to check what seems to be a bug!!!. Anyone ????, Appreciate any suggestions...

Let's talk about time reversing a layer first. If you have a clip that's 30 seconds long and you have trimmed that clip to 4 seconds and you time reverse the layer it's going to take about 4 times as long to render or ram preview as it would when rendered normally. This is because Time Remapping is calculating the length of the clip and the current frame every time it renders a new frame. This takes a long time. If you applied Time Remapping the same clip and then used the keyframe assistant to time reverse the keyframes then these time waisting recalculations go away and every frame is defined by the keyframe data. Renders will be about the same speed as rendering the clip without any effects or transformations. I can't remember when I last used Time Reverse Layer. It's been working like this for as long as I can remember. Maybe it's time for a feature request or a bug report to get someone on the AE team to re-do the math behind the effect.
Another thing that could be slowing down your render is the comp size. You are rendering a huge movie at a completely non standard size. I'd render something like that to an image sequence. Second, you said that you have a grid of 100 pre comps. How big are these? If you've scaled 100 pre-comps that are full HD down to fill your comp then you are asking AE to process 100 HD layers per frame and make those interpretations. The render is going to take some time. If you throw scaling way down, motion, and any other effects on top time reversing a layer you are in for some seriously long render times.

Get-NetAdapterStatistics not showing the actual ethernet adapter

Hi
I have Windows 8 machines who are all unable to display the network statistics for the ethernet connection. When I run Get-NetAdapter the correct interfaces are listed, but not when I run the Get-NetAdapterStatistics command. However, when i run this
command on a Windows 8.1 machine it works.
Any ideas where I can start troubleshooting. The interfaces are up and there are no hypervisors installed.

Hi,
In Windows 8, the command Get-NetAdapter is use to get the basic network adapter properties. And the command Get-NetAdapterStatistics is use to find network adapter statistics.
Manage Network Adapters with PowerShell (Windows 8 and server 2012)
http://www.petri.co.il/manage-windows-server-201-network-adapters-powershell.htm#
And in my Windows 8.1 computer, these commands do the same things as in Windows 8:
Network Adapter Cmdlets
http://technet.microsoft.com/en-us/library/jj134956.aspx
Would you please show me your results? The screenshots would be helpful.
Kate Li
TechNet Community Support

How do I add text to a photo when making a calendar from iPhoto? I see the text box for the dates but not for the actual photo...thanks.

I can't find a way to add text to a photo once it's been put into the top pane of the calendar month...is there a way to do this since I'd like to add a descriptor to the photos? I see the text box when you click on the calendar date, but don't find one for the photo pane. Thanks for any assistance.

Right - you can not add text to photos with iPhoto - you must use an external editor
LN

I found the update function for Genius which is hidden in the Store menu but not in the actually Store. I repeatedly update Genius, get the message that it is communicating with Apple, then that Genius is updated but it never works. What gives?

Repeted updates to Genius do nothing. I always get an error message for all 13,000 songs I have. My disc drive crashed and its taken months to reload click by click every song from the cloud or my computer. iTunes repeatedly crashes if you try to load more than about 50 songs at a time, and always crashes around the 200th song. All my playlists were erased and when I synch one of my two iPods everything on that was erased including all the play lists, I don't ever want to synch my other iPod because it still has dozens of my play lists that it took years to create based on 13,000 songs. So warning iTunes totally ***** if this ever happens to you. My Zune account on the other hand was fine. Anyway back to the question at hand - Genius use to work for my collection. Genius still works for the iPod which I will never synch again, why doesn't it work for my collection now despite repeated updates. Suppose its just another buggy Apple piece of software. BTW don't ever use Apple's iCloud it eats your entire music collection, erases it from you computer and then doles it out one click at a time from the cloud - another stupid piece of software from the geniuses at Apple. But why am I surprised Apple destroyed the record industry, so why not destroy everyone's CD collection and just reduce us all to slaves of iTunes and its magic. I'm sick of Apple and its bloated reputation for great software.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up").
In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC. Now try another QuickTime install (Version 7.7.1). Does it go through properly this time?

For some strange reason, the BBC icon got on a lot of my bookmarks so that when I try to open them, they take me to BBC and not to the actual bookmark. Help!

Several of the bookmarks for some reason had their icons changed to BBC. I didn't do it. Therefore when I try to use them, I get taken to the BBC website. What can I do to correct this?
Thanks

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/
*CheckPlaces: https://addons.mozilla.org/firefox/addon/checkplaces/

TS1741 My Appletv is not showing up on my Remote Phone App. I do not have the actual remote control anymore

Not sure what to do???

Is HomeSharing turned on for the ATV? This has to be done with a physical remote.

Thumbnails do not represent the actual photos

Hello, I am a newbie, so thank you for any help with my problem.
When I scroll through the thumbnails in library, a whole bunch of them appear for a split second but then other thumbnails are shown instead; then when I click to see the full photo, I see the "real" underlying photo, which doesn't match the thumbnail.
Do I have too many photos (2700) for my memory? Am I supposed to not have so many photos in the library? (sorry for dumb questions)
Thanks,
Juyon

Juyon
Welcome to the Apple user discussion forums
No - the problem is not too many photos - 2700 is not a lot
How much free disk space do you have?
If you have enough make a copy of the iPhoto library and launch iPhoto while depressing the option (alt) and command (apple) keys and rebuild the thumbnails
LN

SOAP to RFC result is not Mathcing The Actual RFC Result!

Similar Messages

Maybe you are looking for