Software and page display

When my mini is hooked up to my PC and I click on the mini's icon, it no longer displays my song list.
I've tried everything I could think of to find it.
Which ain't much. HELP

Click on the disclosure triangle to the left of the iPod. Now do you see the music?

Similar Messages

  • Set zoom and page display on open

    Thought I would be able to set zoom (90%) and page display (Continuous) in Acrobat Pro Properties/Initial View before distributing my LiveCycle form, but realize now I can't.
    What scripting would I use in LCD ES2 9.0 document targetted for 8.0 or later to set that?
                                   Thanks!           ~Carol

    That was very helpful - lots of good info there, all in one place. Thanks for sending!
    Since I don't see anything specifically to set page display to Single-Continuous and Zoom to a specific percent (90%), I assume those options are not available?
    Not the end of the world if they're not, just would be nice.
                   Thanks!             ~Carol

  • Bookmarks Panel and Page Display

    BACKGROUND:
    I am using Adobe Acrobat Pro 9 and now when I convert a Word2010 doc to PDF using Acrobat 9 Pro Create PDF. Once the file oepns in Acrobat, I then make the following changes:
    File > Properties > Initial View >Navigation Tab (Set to Bookmarks Panel and Page) Page Layer (Set to Single Page Continuous)
    Preferences are set to: Open cross-document links in same window; allow layer state to be set by user information; allow documents to hide the men bar, toolbars, and window controls.
    PDF/A View Mode is sent to Only for PDF/A documents.
    The only thing that I have done different is that I did open was Adobe LiveCycle Designer ES8.2 and tested converting a word document into a form last week. I then attempted to convert files from WORD2010 to Acrobat Pro 9 on Friday and say the problems. I am now also having problems with Adobe LiveCycle.
    Attempted Resolution: Our Help Desk uninstalled and then re-installed Acrobat Pro 9 but that has not resolved the issue. They are recommending that they wipe my profile and build it again. I am hoping to avoid that and hope someone can help me with this issue.
    System Information:
    Version 9.0.0.2008061200
    OS Manufacturer: Microsoft Corporation
    OS Name: Microsoft Windows XP Professional
    OS Version: 5.1.2600 Service Pack 3
    Thanks for your assistance,
    DOL-MSHA

    The Bookmark Panel to the left of the pdf is not displaying - I have checked everything (and double checked under preferences to ensure that under Documents > Open Settings > Restore last view settings when reopening documents is Not checked.)
    Have reinstalled Acrobat and still am having issues. The only thing I did was open AcrobatLive and converted a doc to a fillable form - I am getting error messages with that now as well.

  • Apex tab and page display query

    I am using Apex 4.1
    I have the following tabs set up.
    Home, Tab 1,Tab 2 and so on
    The home page is fine. Now the query is with regard to Tab 1. I need it to display Page 3 or Page 4 based on the location of APP_USER
    The region details are all stored in the table : employee_info
    How can I check or display Page 3 if the Region is APAC and Page 4 if EMEA(APAC and EMEA being values in table)
    Is there some way how I can set or achieve this? The default page I have set is as of now Page 3 but it has to pick Page 3 or 4 based on region value from employee table.
    Any guidance will be appreciable.
    Thanks,
    Swetha

    LKSwetha wrote:
    I am using Apex 4.1
    I have the following tabs set up.
    Home, Tab 1,Tab 2 and so on
    The home page is fine. Now the query is with regard to Tab 1. I need it to display Page 3 or Page 4 based on the location of APP_USER
    The region details are all stored in the table : employee_info
    How can I check or display Page 3 if the Region is APAC and Page 4 if EMEA(APAC and EMEA being values in table)
    Is there some way how I can set or achieve this? The default page I have set is as of now Page 3 but it has to pick Page 3 or 4 based on region value from employee table.
    Any guidance will be appreciable.Create 2 copies of Tab 1, one for page 3 and the other for page 4. Display them conditionally according to the user region.

  • Footnoting - Logos Bible Software and Pages

    Hey all. I am currently using Pages '09 and the new Logos Bible Software for mac.
    In Windows I used to be able to just copy paste to a pages document and it would create the footnote for me! I can't figure out how to set this up in Pages.
    Are any of you using Logos and Pages?
    Do you know how to get the footnoting to interact better?

    I've been having the same problem as well. I contacted Logos about this because this was the main reason I went with them. Below is a summary of the email I received...
    I'm afraid that Pages does not support our footnoting capabilities. There is a open source text editor called OpenOffice that you can download for free and it does support our footnotes....
    ...the problem with this footnotes is with Pages. Libronix includes the data for the footnotes but Pages is not designed to use the extra data to create footnotes. Unless Pages comes out with an update that includes allowing footnote data I doubt we will be able to make this feature work for Pages.
    I was pretty bummed to hear this but that's the way it is I guess.

  • Page "Display Trip Form"

    Hi All.
    I am implementing ESS/MSS for Travel expense. I want to use iView and Page "Display Trip Form". This iview and page is in Portal contend directory :Portal COntent -> Content provided by SAP -> End user content -> ESS -> Pages -> Travel and Expense .
    When I take a pre view of this page I get bellow error message:
    "At least one optional parameter must be specified when method is called"
    Do you know why this message is comming and how can we fix it. Is there some config missing or do I need to set some property of iview/ page?
    Regards,
    Amit.

    Hi,
    Display Form aplication needs trip number & employee number as parameters. if you click on preview in PCD then you are not passing any parameters in application. once you associate this ivew with travel & Expense like in UWL or with some event then you can see proper output.
    Regards,
    Amit

  • I've got a MacBook pro 15' running 10.6.6. I want to use an external monitor for my graphic design work running Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing.

    I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.

    In addition to pixel density, you are up against the translation driver card in the TV.
    If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page.  At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
    Mac falls into the top 25% of the page, maxing out at 1366x768 often.  This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
    I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector.  Computer monitor first, TV second.  But the thing is only 27 in.  Good thing TV is not as important to me as it is to others.

  • I just updated to the new software and now my app Store is not working It is just a white blank page

    I just updated the new software and now my app store will not work I have shut it down and opened up again and nothing just a blank white page ?

    I'm having a similar problem.
    New iPad with iOS6 just downloaded.
    I cannot purchase any new items from the new Apple Store now!
    It keeps asking me to fill in CC details, asking for security number, but stays red when i fill in the 3 numerals and when I click done I get a Time Out message.
    This is not good Apple!!
    Looks as if I will have to use my iPad One to purchase from the Apple Store.

  • TS2167 I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?

    I changed my header in iweb and when I published the site the font had shrunk and it displayed incorrectly. It was only on my home page, not on others. I have iweb 3.0.4. Help!?!?

    Just in-case anyone els runs into this, I figured it out... I was working from my hotel and apperantly the fire wall was not allowing anything to uplaod, but I wasn't getting an error message from iweb, it would say that everything was published succesfully even though it wasn't. Once I went home and used my connection eveything worked fine.

  • HT1338 I purchased keynote, numbers, and pages when i bought my macbook air. However, the December update will not update because it says I do not own the software, but I do. What can I do to get the software to load? This is my first Mac so I am still le

    I purchased keynote, numbers, and pages when i bought my macbook air in late september. the december update will not load because it says i do not own the software and returns an error messgae 100. i have read manuals and looked over the web but i cannot figure out how to get this software update to identify that i do own these three pieces of software. they are installed and usable. any ideas would be appreciated before i call apple support.
    This is my first mac so i am still learning...
    thanks

    First, make sure you are logged into the App Store with the same AppleID that you used to purchase the apps.
    If that is not it, look in the App Store under Purchases. Are they there?
    If not, go into your account in App Store and click the link to show hidden purchases.
    If they are still not there, use the support link in the App Store.
    If they do show up, copy all the apps to an external drive, then remove them from your Mac. Go to the App Store, Purchases, and install from there.

  • Why is login page (to register to use this forum) and other pages displaying foreign characters (e.g., বাংলা (বাংলাদেশ) when am using English (U.S.) versions of IE6 & Opera 10.6 to contact you (as FF4 hanging computer)?

    FF4 hanging badly, so used IE6 & Opera 10.63 to register with & access Mozilla support site. Some words on those pages displayed in a foreign language (Arabic script?? )-- example, বাংলা (বাংলাদেশ)
    Foreign characters on initial Support registration page, were in lieu of English words asking to select UserID & Password. (Page not entirely in foreign language--only parts. Request to repeat password choice, enter email, were in English).
    I registered (guessing what to enter). Went to Support page [support.mozilla.com/bn-BD/kb/ask]. Greeted by statement: "Our volunteers haven't translated this article into বাংলা (বাংলাদেশ) yet."
    No idea what language that is, or why u think I can read it. Presently logged in from U.S.

    That is Bengali ([http://www.mozilla.com/en-US/firefox/all.html]). Firefox 4 no longer has the language setting in the user agent and in your case it doesn't seem to work to detect the language.
    You can change the bn-BD in the link(s) to en-US on the Mozilla sites.

  • I use classical Hebrew for my work, and Pages will only display English characters even with a Hebrew font selected. If I cut and paste Hebrew characters from another document, as long as the font is supported, it will appear in Pages.  If I type it won't

    I use classical Hebrew for my work, and Pages will only display English characters even with a Hebrew font selected. If I cut and paste Hebrew characters from another document, as long as the font is supported, it will appear in Pages.  If I type it won't continue in Hebrew.  I have tried downloading several fonts, including those from professional societies, but the only way to get Hebrew in my document is to cut and paste.  Does anyone know how to fix this?  I use an older MacBook running OS 10.9.1.  I used to do my Hebrew work in Word, but it is no longer supported by Mac OS.

    Just clarifying:
    Pages '09 has bad support for Hebrew, Arabic etc but will accept pasted text.
    Pages 5 has much better support but with bugs.
    If you have columns they are in the wrong order ie Text starts in the left column and ends in the right column.
    If you type English into Hebrew text it tends to fall in the wrong position eg instead of to the left of Hebrew punctuation it goes to the right.
    As Tom recommends the only real solution on the Mac is Mellel.
    Peter
    btw Tell Apple, they are amazingly slow to fix this running sore which has been broken since RtoL was supposedly introduced in OSX 10.2.3 over a decade ago.
    Peter

  • My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my

    My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!

    Hello jraff21,
    I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
    iOS: Restore errors 4005, 4013, and 4014 - Apple Support
    You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
    The iPhone [device name] could not be restored. An unknown error occurred (4005).
    The iPhone [device name] could not be restored. An unknown error occurred (4013).
    The iPhone [device name] could not be restored. An unknown error occurred (4014).
    Try these steps to resolve the issue:
    Install the latest version of iTunes.
    Restart your computer.
    Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
    Restore using another USB cable.
    Learn more about updating OS X.
    Learn more about updating Windows.
    Restore your device on another computer.
    If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
    Learn more about other update and restore errors.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Web pages displaying incorrectly e.g. no Wonga slidebar though sliders still visible and workable

    I've had this problem for the last few weeks - i.e. on Firefox 8 and 9 which I changed to today in the hope it might fix it. It didn't. No pages display as they should. E.G. on the top of this page where you see 'user name', 'sign out', 'inbox', 'other applications', these are surrounded on three sides by thin lines only. The background is white. Sign in boxes on various sites consist of two slightly misaligned text box frames that make reading the word difficult. They still work though! Sorry if I'm not describing this very well. Hopefully you get the gist. I've tried emptying the cache in options and made sure my add ons etc are up-to-date as per the advice for incorrectly displaying web pages. Any help much appreciated. (its probably something silly I've done but I just can't fix it.) BTW pages display properly for the other user on this laptop (i.e. on their side!)

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *http://kb.mozillazine.org/Websites_look_wrong

  • Keynote, Numbers and Pages are displayed as Top Free, but charges fee.

    Hi All,
    In the first page of Appstore Keynote, Numbers and Pages are displayed as Top Free. But when I try to get them from AppStore it charges fee. How can I get them free?
    Thanks in advance.

    Asked and answered at least a dozen times in this forum in the last week. Please always do a search before posting.
    The iWork apps are currently free to some folks who qualify.
    If someone bought a new Mac since ! OCT 2013, iWork is free.
    If someone owned the previous version of iWork and upgraded to OS X Mavericks 10.9, the newest version of iWorks for Mavericks is free.
    Otherwise, these are usually paid apps.

Maybe you are looking for