Software deployment to Users

Hi,
I am using SCCM 2012 R2, for Software deployment to users instead of System, is User and Device Affinity need to configure ??
User and Device Affinity configuration is perquisites for deploying the software to Users?
Shailendra Dev

No it's not. It would only be needed if you make use of the requirement "primary device = true". 
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

  • Uninstalled software deployed by SCCM still remains in Installed Applications

    Hi experts
    I noticed when we manually uninstalled a software which was deployed via SCCM, in Software Center, under Installed Applications, the software is still listed as installed there. 
    I know the only way to make the software unlisted under Software Center is to remove the software deployment on the Primary Site Server, refresh the client policy and the software will disappear from the Software Center, but that means it will disappear for
    all the other computers which will need the software as well. I don't think this is a workable solution.
    Possible to share if the uninstalled software will automatically disappear from the Installed Application to Available Application? If yes, how long would it take, does it depend on the next cycle where the SCCM client get new policies from the Primary Site
    server?
    The reason why I am asking this is because it might confuse the end user.
    User: I thought you have uninstalled the software!
    IT: Yes we did
    User: Then why is it still listed under Installed Application in Software Center. It is bugging me! You didn't do your job.
    Thank you

    Hi,
    You could check AppEnforce.log and CIAgent.log to confirm the current state for this application after running the Application Deployment Eval Cycle.
    1. Find the ScopeID of the application in AppEnforce.log.
    2. According to the ScopeID, check the current state for this application.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How during deployment my user id has been checked by J2EE engine

    Hi,
    If I want to transport my application, Do I need a valid user ID created in J2EE engine UME. If it is, How during deployment my user id has been checked by J2EE engine.
    Thanx for your time.
    Cheers,
    Sam

    Hi,
    to deploy your application to the J2EE engine you normaly use SDM (Software Deployment Manager). You need a password (no user Id) to deploy via SDM. This password was set up during installation of the Web AS. You can reset this password via SDM command line tool. Have a look at the SDM documentation for details.
    SDM uses the deploy service of the J2EE engine to deploy the application. Therefore SDM connects to the J2EE engine via a username and password that are stored in the secure store (Configtool -> Secure Store). This user is normally identical with the administration user. If you change the password of the administrator you also have to change the password in the secure store. Oterwise you cannot deploy via SDM.
    Regards Helmut

  • Sccm software deployment

    Dear Exprt,
    How could i create advertice in sccm 2007 for software deployment as follows.
    1.First remove older version
    2.Prompt to user for computer restart.
    3. once restarted run again software installation
    [email protected]

    I appreciate that this isn't exactly what you've requested, but I can't give any better advice than the previous posters!
    If possible, I'd suggest that you set the advertisement to only apply when No user is logged in, and set the success return code as Hard Reboot. Also set the advertisement as Required.
    Providing no user is logged in, the computer will install and then reboot. As for the installation of the new version... On
    the Options tab you can set a condition based on a WMI query, registry setting, or installed product code.
    Your users actually log off? How about the user who powers the machine off, powers on the next day and about the time he gets logged in his machine is forcefully rebooted?
    I haven't looked at a 2007 site in a couple years now but I don't recall there being options that you are speaking of.
    John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

  • Software deployment never works

    The software deployment component has not been updated since windows server 2000 as far as i can see and it has never worked well, requires .msi and is just rubbish.
    Why is there by now no good way to roll out software to users and why does the software gpo never install and uninstall software correctly, always comes up with pointless errors in the event log that never help.
    Why is there no effort to improve this basic functionality?
    SME are not going to buy SCCM and sccm is not that much better at rolling out software anyway.
    I end up having to use login scripts and other non sense.

    Yes, I have rolled out a thin image with MDT and so on.
    One of the problems is that i installed X software as user context with gpo with a version 10.0. to windows 7 32bit roaming profiles.
    Then I applied update to X software server to 10.2, swapped out the msi with the 10.2 version, then users moved to windows 7 64bit with new policy and new image from mdt. Then when they log in with roaming profile the gpo tries to install 10.2 of the software
    and it says it can't remove the previous version. I don't see why it needs to remove the previous version because it doesn't. Running the msi within the user session manually works without admin rights and any issues, so i know there is no problem with the
    msi.
    I should have applied the 10.2 update to the users profiles before they moved to the new image and this would have allowed for the previous version to be detected properly. Even though I have tried pushing out the new version to the old image, it still fails
    in teh same way.
    Is it not possible to remove the package 10.0 then add package 10.2. Do i realy have to keep 10.0 in there and than add 10.2 and go to upgrades tab and specify that 10.2 is the new version of 10.0. Is it realy that rubbish that it can't just isntall the
    msi?
    However even just pushing out a flash update fails. Comes up with similar problems trying to find the previous version.I tried removing the previous version from program and features to see if it would work if there was no version installed it has similar
    problems.

  • Windows 8.1 update via Intune software deployment

    Hi Forum
    Is it possible to push or make available the Windows 8.1 update via Windows Intune software deployment?
    This is for laptops.
    Thanks in advance
    NN

    Yes it will be, but not yet. See http://social.technet.microsoft.com/Forums/en-US/79d259ff-47ff-4728-8ee9-28a5e06e5ba5/i-dont-see-httpsupportmicrosoftcomkb2919355-within-updates-for-windows-intune-is-it-out-of?forum=windowsintuneprod
    Jason | http://blog.configmgrftw.com

  • How to install Software Deployment Manager

    Hi!,
    I have downloaded the PDK files and want to deploy it? How do I deploy them? As per help I need SDM ( Software Deployment manager to deploy this files, from where I will get software deployment manager and how to use SDM to deploy PDK files...please help...
    Also I have more query...
    In my netweaver studion, when I goto window-->preference, why I can't see software deploment manager link?  this SDM is used to deploy WebDynpro application with Enterprise portal....
    Please help me....
    Thanks !

    hi
    software deployment manager installed automatically in central instancc while installing sap netweaver .
    Thanks
    Bharathi.Ch

  • Prime Infrastructure 2.0 Software Deployment VSS Systems

    Good day -
    Has anyone used the PI 2.0 Software Deployment with VSS systems like 6500 or 4500? Does it work? Does it upgrade the image in eFSU? Should VSS systems be manually updated?
    Finally are there any guides or documentation on using PI 2.0 to deploy / upgrade images for platforms like 6500 / 4500 running VSS mode?
    Thanks,
    John                  

    there is a Feature Enhancement BUG filed for VSS support 
    Unable to add or manage a 6500 in VSS in PI:
    https://tools.cisco.com/bugsearch/bug/CSCuj09930/?reffering_site=dumpcr
    Thanks-
    Afroz
    [Do rate the useful post]
    ****Ratings Encourages Contributors ****

  • Software transfer between user accounts?

    I have just bought a Macbook pro after using a Macbook for the last 5 years. I installed new Office software under one user account and stupidly transferrred all working information/documents across via migration assistant with another user account - how do I please carry across the new office software to the other account?
    Thanks very much!!

    sarahfromamersham wrote:
    I have just bought a Macbook pro after using a Macbook for the last 5 years. I installed new Office software under one user account
    I don't use Office, so can only offer generic advice. 
    Did you install the Office apps in the main, top-level Applications folder, or in an Applications folder inside that user account?
    If you're not sure, some installers give you the option of installing for everybody, or only the user account you're on at the time (the exact wording may vary). 
    If it was installed for a single account, is that an account that you'll be using otherwise, or is it an "extra" account you really don't want to use at all?
    and transferrred all working information/documents across via migration assistant with another user account
    Is that the account you want to use for everything (ie, your main or only account)?

  • Csa 6.0 problem with software deployment tool

    Hi Guys,
    I am having some problems with csa 6.0 and a software deployment tool called capainstaller, it resides on the client and picks up packages on some server shares and executes them from there, or copies it locally. We have added it to the class that defines mass software deployment like we did in 5.2, which works fine in 5.2, in 6.0 we are getting alot of applications getting put into @untrusted, for some reason. I can't figure out if i am supposed to make general exeptions for shares and local directories where the deployment tool reads its packages from ? In that case which classes should i modify, i am seeing alot of classification from the module called Security - Untrusted Content Classification, and this gives me alot of headaches.

    Well, the Mass Software Deployment class, is where you are supposed to put marimba, in 5.2 this was fine, and worked for most of the installations i have done. in 6.0 the big break came when i found out that you can't use UNC network paths in a file set, it just doesn't work. If you put it is a literal straight in the same field as the altiris and sms are in the built-in rules, that works, maybe your marimba agent is also part locally installed and part gotten from the network like ours is ?

  • Any free coldusion based software deployment tools?

    Hi, i'm trying to find a web based software deployment tool, ideally written in coldfusion. Does anyone know of any?
    Thanks
    Z

    It's very easy with Time Machine (which is built into the OS).  Just turn on Time Machine in System Preferences, plug in an external hard drive, and you should be asked whether you want to use that drive for TM.  (Warning: this will erase the drive, so don't do this if there's data on the drive!)
    For more about backups, see my Mac Backup Guide, as well as Pondini's excellent Time Machine FAQ.
    (Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

  • How can I share applications and softwares with different users of the same computer?

    First question: How can I share applications and softwares with different users of the same computer?
    Second : Can I use 2 different I cloud accounts to synt 2 iphones with one computer?

    Applications installed on the admin account are available to all user accounts unless Parental Controls are enabled.
    Yes.   Separate user accounts, help here >   How to use multiple iPods, iPads, or iPhones with one computer

  • SSRS - Report on software deployment Exit Codes on client machines

    Hi,
    Can anyone advise whether its possible to report on Software deployment Exit Codes on client machines, with a particular exit code and how many times the deployment has been retried?
    Example:
    Application deployment- App1
    Failed with Exit code : 0x1388 (5000) Log off network
    I would like to report on clients with App1 deployment failed with exit code 5000 and how many times on retry?
    Regards,
    Craig
    MCTS | MCITP | MCSA

    Only the last return code can be queried (see the default SRS reports). Number of retries are not reported.
    Torsten Meringer | http://www.mssccmfaq.de

  • Single Instance(Adhoc) Software deployment by Service Desk

    For some tools there are ways to provide a URL to the Helpdesk Team using which they can deploy one-off adhoc software deployment requests. Whats the best way to do it with SCCM 2012.
    Is installing the Console on their machines and give appropriate role access to them the only way?

    "Here is the current solution I'musing...
    At least for now, the easiest thing I could come up with is the following:
    1. Created a Collection Folder named "Application Deployment" which inside holds a Collection named for each application they need to deploy.  These Collections have no queries. 
    2. Deployed / Advertised each Application to it's corresponding Collection I created above.  All are set to immediatly install.
    3. Deployed SCCM Admin Console to each of their computers.  They now have rights and have been trained only to be able to copy a hostname to one of these existing Collections, then use Right Click Tools to force a machine policy refresh if needed."
    WEBSITE:
    http://www.windows-noob.com/forums/index.php?/topic/5945-easiest-method-of-deploying-apps-for-helpdesk-staff-rons-web-tools-for-2012/
    -RG

  • Software Deployment Manager Starting problem

    Hi,
    I had installed netweaver for Java edition. I can open my portal using http://localhost:50000/irj/portal. i am wondering how to open the Software Deployment Manager. Can some one help me in finding Software Deployment Manager.
    cheers
    ram

    hi Anil,
    I am sorry, let me rephrase the question. I couldnot locate where can i find this SDM. can you tell me where can i find this SDM.
    cheers
    ram

Maybe you are looking for