SOLAR01: Business Scenarios

Hi,
I am getting the error when I do the following:
1.) Go to a project in SOLAR01
2.) Highlight "Business Scenarios"
3.) Go to the Structure tab and source set to business process repository, open the input help
4.) From the "Buinsess Process Repository Selection Help" screen, select SAP CRM-->Field Applications
Error: Error while removing contexts.
Message no. SOLAR_MESSAGES031
Please help urgently.
Thanks,
Rinkal

Hi,
The BPR-content is stored within software component ST-ICO,
if you run Function module SOLAR_BPR_F4 in test mode with
I_STRUCT_TYPE = BMBSL
than you can see, this is what you should be seeing.
mySAP SRM
Catalog Content Management
  SAP SRM 6.0,SAP NETWEAVER 2004S
  SAP SRM 4.0,SAP NETWEAVER 04
  SAP SRM 3.0 (WITH SAP EBP 4.0),SAP R/3 ENTERPRISE 47X110
  SAP SRM 3.0 (WITH SAP EBP 4.0)
  SAP SRM 2.0 (WITH SAP EBP 3.5)
These contents is delivered with patch 8 of component ST-ICO
note 629829 describes, how to download the most up to date Solution
Manager content from Service Marketplace
Also check note :1327596
Normally this error disappear when ST-ICO is upgraded.
Hope this helps.
Regards,
Shyam.

Similar Messages

  • SOLAR01-Business Scenario client level restriction.

    Hi Experts,
    I have a client in which i have different business scenarios defined.
    New client has been created by copying the exisiting one.
    Now i want to delete some of the scenarios in the new client and try to create additional scenarios.
    But i dont want to disturb the existing client.
    Since it is kind of cross client activity, the change what ever i am making is reflecting in both the clients.
    Is there any way to make this as client dependant activity instead of cross client.
    In a simple words, Solar01 activity needs to be made as client dependant.
    Pls advise..
    Thanks in advance.

    Hi Brian,
    I have the same scenario in my environment consisting of Solution Manager 7.0, "SAP Business Objects Business Planning and Consolidation" but it shows an older product version "SAP BPC 7.0 FOR MICROSOFT, " Only 
    But in Solution Manager 7.1 System it is showing both ""SAP BPC 7.0 FOR MICROSOFT,SAP BPC 7.0 FOR SAP NET WEAVER".
    Please Suggest is anything needs to be done in Solman 7.0 System  ?

  • Solar01 - Business Scenarios/Process/Process steps out of alignment

    Hello Folks,
    We have a situation where the business process that are now in BPH in Solar01 in Solman should have been business scenario
    and same with process step should be process.... Is there any quick way to fix that like going into tables and fixing the
    data? If so, Can you please let me know what are the tables in which the Business scenarios, processes and steps or the hierarchy is stored?
    Or is there any other way to fix this?
    Appreciate your kind response.
    Cheers,
    Venky

    Hi Venky,
    Unfortunately, there is no way to do it, because the nodes have different types, and it would be like trying to transform one thing in other totally different. You can only recreate the hierarchy manually.
    kind regards,
    Fabricius

  • Authorization for specific business scenario or business step in solar01

    Dear all,
    we have an issue regarding solution manager blueprinting management restricting an access to specific nodes. Our goar is to have several substructures devided by modules like: FI, SD, PS and etc. And each team member according his position in a company should have an access only to his substructure and all the related documentation below that. Saying an access means a change mode not a display access.
    Please find the steps have been performed during the configuration of project below:
    All the configuration around system landscape has been done properly.
    A new project for solution was created in solar_project_admin.
    A correct logical componens has been assigned.
    All the required users have assigned as a team members of a project.
    At the projec. team member tab a box has been checked in for: restrict changes to nodes in project to assigned team members.
    A proposed structure of nodes has been created within Tx solar02.
    The right team members have assigned to specific node. So that only they suppose to have a change permission within that nodes. All others read only access.
    Every user has sap_solar01_all role assigned to him. We have tryed assigning varios roles according to  http://help.sap.com/saphelp_sm310/helpdata/en/db/a1033b2a98f46ae10000000a11402f/content.htm
    However as a result we are having a change permission allowed for every node within the structure. Like FI responsible member can access to any node from a tree. And he can make a change for SD related documentation.
    Please assist regarding this issue.
    Kind regards,
    P.S.
    I found a thread with a similar problem which was solved by activating a checkbox which is already activated in our system and actually doesn't solve that problem for us.
    Authorization for specific business scenarios in Solar01/02
    Edited by: Artjoms Nikulins on Mar 11, 2010 3:37 PM

    Hi
    As far my knowldege goes this is not possible to do within same project or making the same.
    You can have project specific access given to member but you cannot go module wise authorization.
    Ofcourse there satellite system authorization will be different but not in solman.
    In addition check this security guide
    https://websmp104.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000075728&_OBJECT=011000358700007187872005E
    Hope it ans ur query.
    Regards
    Prakhar
    Edited by: Prakhar Saxena on Mar 12, 2010 3:22 AM

  • How to connect steps in business scenario

    Hello,
    After creating a project in Solution Manager, creating a business scenario in that project and creating a custom business process in my scenario, Iu2019ve defined the necessary steps that I want in my process. These steps involve 2 different logical components, a component specified for a SAP XI/PI system and a logical component for SAP ECC system.
    The business process will involve interaction between the two logical components where Idocs will be exchanged. My first issue is, in transaction SOLAR01 when I click the tab Graphic, Iu2019m able to see the two separate components each with their steps but with no connection or relation between them or with any step order.  Where can I define the order and flow for the steps in the business process? After defining the flow, will the connections be presented in the graphic?
    One other question, if this business process involve interfaces, should I define this as a business scenario or as an Interface Scenario? What is the main difference between these two objects? Canu2019t I have only business scenarios and define the steps as interfaces?
    Thank your for the attention.
    Best regards,
    Goncalo Mouro Vaz

    Hello,
    please be aware that only business process maintained in the operations part of SAP Solution Manager. i.e. the Solution Directory, are available for Business Process Monitoring. Processes defined within SOLAR01 are in the project part and hence not directly available for monitoring. But those processes can be copied into the Solution Directory.
    For BPMon only "Business Scenraios" are of interest. "Interface Scenarios" need not be maintained but can be used for additional documentation purposes.
    Please refer to http://service.sap.com/bpm > Media Library > Technical Information > Setup for Interface Monitoring.pdf
    You may also visit the FAQ page http://wiki.sdn.sap.com/wiki/display/SM/FAQBusinessProcess+Monitoring
    Best Regards
    Volker

  • How to map business scenarios from implementation project to template project

    Hi
    We have a template project and in this we have maintained few business scenarios. And also some specific scenarions are configured in the implementation project. Now we need to make template project as Global Template and for this we need map all existing scenarios in implementation project to template project.
    Please suggest how we can map from implementation project to template project.
    Thank you

    Hello,
    Along with Sandeep recommendation, you can do it by several ways.It all depends on how are the current projects organized.
    Did you create the template project and then rolled out the templates to the impl. project?
    In case you want to update these scenarios in the Template project based on the changes you performed in te Impl. Project, you can use the Compare & Adjust functionality.
    You can Copy Scenarios from one project into another by using the right click/context menu directly in the node in solar01.
    If you just want to copy the structure, you could export the  Impl. project structure in solar_project_admin by using the "fill business blueprint" functionality, then adjust the structure similarly for the template project and upload.
    and so on..
    regards,
    Fabricius

  • Sol. Landscape - Business Scenarios from Temp. Project: Compare & Adjust ?

    Hi,
    In SOLMAN_DIRECTORY, within Business Scenarios, if I were to copy Business Scenarios from a Template Project, is it supposed to help me use the 'Compare and Adjust' functionality ?
    I see the icon for this utility, but invariably greyed out at all levels.
    The idea is to hold Template Project as the master content provider, even for Support side.
    The workaround could be (yet to fully test) to use a Maintenance Project, to compare and adjust and check it in again.
    Any ideas welcome - especially, on why the 'Compare and Adjust' icon appears greyed out, in the Solution.
    Best regards,
    Srini

    Hi Andreas,
    The news that your colleague has tested it successfully is very encouraging and gives me hope.
    That's the way I was testing as well, with limited success. I couldn't finish testing because the the buttons for Check Out/ Check In Requests disappeared from SOLMAN_DIRECTORY suddenly. Then, I got into SAP Notes search etc.
    Can you/ your colleague please confirm if my following understanding is correct and suggest changes where it's wrong:
    (1) First, create a Solution and Maintenance Project in the same project language (to get the KW context right)
    (2) Create a few Business Scenario Names in Solution Directory (e.g. Procure to Pay, Order to Cash etc.)  - as manya s required
    (3) Later, assign the Maintenance Project concerned to the Solution, in the tab 'Solution Settings'
    Note: (2) is done before (3) since the assignment of a Maintenance Project renders the section greyed out. If it is greyed out, there is nothing to check out at the first place.
    (4) Check out the Blank Scenarios to Maintenance Project
    (5) In SOLAR_PROJECT_ADMIN, I would have already pre-selected the relevant scenarios under 'public' Templates, so that they are available in Maintenance Project's SOLAR01/02 under the Business Scenarios folder
    (6) Now, when I open the Maintenance Project in say SOLAR02, it would list me the scenarios copied from Template in the usual way (as in say, any normal Implementation Project), and below those folders, it would also list the 'Checked Out' name sake Scenarios from the Solution Directory
    (7) I will 'copy' and 'paste' the right Business Processes from the first set of Scenarios (from Template Project) into the Solution Directory blank Scenarios -  while doing so, I will retain the right to 'refer' documents and not copy them
    (8) I would Check In the structure back into Solution Directory
    (9) In say, a months time or so, the Process in Template Project have undergone changes (more process steps added under a process, more documents added/ removed/ changed etc.)
    (10) I would open the Maintenance Project after running SA_PROJECT_UPGRADE for the maintenance project.  I would do the 'Compare and Adjust' function in the regular Scenarios to get the content adjusted

  • Abap to mass create business scenarios, business process, and process steps

    HI,
    Really struggling to figure out how to mass create "folders" in the business blue print structure.      Periodically we will need to add in a new business scenario with everythign associated with it.  the business has already written up all the information in excel sheets and we would like to avoid having to manually enter this data every time..   These scenarios and process etc are project specifc.
    Has anyone done this before? I have been playing with SOLAR_STRUCTURE_CREATE and while i can see the lines being added into table, i can't get anything to appear after wards in SOLAR01.
    Any and all help greatly appreciated
    Sara

    Hello.
    I was searching how to use the program RS_SOLAR_IMPORT_STRUCTURE for mass create business scenarios in Solar01.
    I saw you was in the forums about this. Do you got to do?
    Can give me this development?
    Thank you for your help.

  • Business scenario selection

    Hi folks,
    I am involved in a ramp up project.
    I created a project in solman in SOLAR_Project_Admin. I am tryinig to select the business scenarios from BPR but i am unable to view the BPR structure in the SCOPE tab (Template selection within that). I need to select few scenario say, Finance and Procurement.
    Could anyone help me? what are the dependcies for this task. what are the steps i need to ensure before doing this? anything in system landscape? how do i select the business scenario for the project i created?
    solman 7.0 and ECC 6.0 being used.
    appreciate your inputs
    Drake

    Hi Drake,
    You will be able to select business scenarios with transaction SOLAR01 (Business Blueprint).
    SOLAR_PROJECT_ADMIN is used for project admin setup. You can also choose from template projects or roadmaps.
    Regards,
    Ruediger

  • Creating a Business Scenario for CPM BPC 10

    Hi Everyone,
    I've been trying to create a Business Scenario within my Solution Manager (TCode: SOLAR01). But I've don't see any option related to our version of our Business Planning and Consolidation (BPC 10). The only option I see that is close enough is "SAP BusinessObjects Business Planning and Consolidation" but it shows an older product version "SAP BPC 7.0 FOR MICROSOFT, SAP BPC 7.0 FOR SAP NETWEAVER".
    To be clear, the ff is what I'm trying to do.
    Steps:
    1. TCode SOLAR01
    2. Project >> Business Scenarios
    3. Source = Business Process Repository
    4. Add Scenario Name (F4)
    Our SAP BPC software has been installed within our "SAP Netweaver AS ABAP 7.31" as the following Software Component:
    Software Component: CPMBPC
    Release: 801
    Level: 0001
    Highest Support Package: SAPK-80101INCPMBPC
    Description: CPM Business Planning and Consolidation
    So my question is, how do I properly add the business scenario that matches my BPC 10 software component? Is there anything I must do/check first?
    Apologies if this might sound very basic, but I'm new to Solman.
    Any help is appreciated.
    Thanks and Regards,
    Brian

    Hi Brian,
    I have the same scenario in my environment consisting of Solution Manager 7.0, "SAP Business Objects Business Planning and Consolidation" but it shows an older product version "SAP BPC 7.0 FOR MICROSOFT, " Only 
    But in Solution Manager 7.1 System it is showing both ""SAP BPC 7.0 FOR MICROSOFT,SAP BPC 7.0 FOR SAP NET WEAVER".
    Please Suggest is anything needs to be done in Solman 7.0 System  ?

  • Business scenarios for daily, weekly and nightly loads!!

    Can any body tell some Business scenarios for daily, weekly and nightly loads where we monitor the loads in Production support.
    Regards
    srikanth.ch

    Hi,
    It all depends on your business needs. In general on daily basis you will load the SD and MM which will cover all the stock and sales done for day. Generally most of the clients use Lo Cockpit extraction for both the modules. FI chains will run on month end for example the AP(Accounts Payable),AR(Accounts Receivable) chains will be run on the month end.
    Some SD datasources : 2lis_13_vdhdr, 2lis_13_vditm, 2lis_13_vdkon - all these to pull billing related data
    Some MM Datasource : 2lis_03_bx and 2lis_03_bf.
    Regards,
    Harish Raju

  • Variable declaration in BEx - Business scenario's

    Hi,
        I need some documents about all kind of variable declaration with some example business scenarios in MM, FI-CO modules.
    will assign you a reasonable points
    Regards,
    Pooja.S

    Hi Pooja,
    The processing type of a variable may be varies from business requirement.
    In general we will use the processing type:
    Replacement Path : If you specify a variable as a characteristic value, you do not have to specify a text for the characteristic value right away. Instead, you can fill the text field dynamically and specifically for the characteristic that you use for the variable when you execute the query. To do this, define a text variable with automatic replacement.
    [http://help.sap.com/saphelp_nw70/helpdata/EN/bd/589b3c494d8e15e10000000a114084/content.htm]
    Authorisations: If the user belongs to Asia PAciffic region and he must see only details of his region then we can create a variable Region vt Processing type Authorisations so that he vl able to see only that region's data.
    [http://help.sap.com/saphelp_nw70/helpdata/EN/44/599b3c494d8e15e10000000a114084/content.htm]
    SAP EXIT: If you want to define a query that only ever displays the data from the current month, drag the delivered variable “current month” (technical name 0CMONTH) for the characteristic “calendar year/month” (technical name 0CMONTH) into the query filter.
    [http://help.sap.com/saphelp_nw70/helpdata/EN/f1/0a5702e09411d2acb90000e829fbfe/content.htm]
    Customer Exit: You want to use one characteristic value to calculate a second characteristic value. The InfoProvider only contains the calendar day. However, you now also want to display the cumulated value for the relevant period (beginning with the first day of a quarter) in a query.
    For the first day of the quarter, use a variable with customer exit processing. If you now enter the current calendar day (for example, 06/19/2000), a start date of 06/01/2000 appears in the customer exit, and the cumulated value of this period can be displayed.
    [http://help.sap.com/saphelp_nw70/helpdata/EN/f1/0a56f5e09411d2acb90000e829fbfe/content.htm]
    I hope this helps you.

  • Activate Business Scenario Configuration Error in SCL SOAMANAGER

    Hi Holger,
    With your assistance, I managed to solve my issue creating the business scenario as posted in
    Re: 3.3.8 Create a Business Scenario Configuration .
    However, now I face another situation.
    Once I have created the 3 required business scenario's on my SCL, I then proceed to activate them.
    I face the similar error as posted by Simon Kemp previously on Activate Logical Ports Fails with UDDI error
    Error Message:
    Activate logical ports for service group /IWCNT/BPC_SERVICE_GROUP and application PS_ER4_100/APP_ER4CLNT100 in scenario STARTER_SERVICES
    I have created the SAPLOGONPROFILE version 1, exported from the backend and imported into the SCL. The versions are the same.
    Thanks.
    Regards,
    Haridev

    Hi,
    the troubleshooting guide I have created is now online:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/603ab5a0-184b-2e10-98a7-fa7e7e9da7a1
    Can you take a look at the chapters:
    7. An unexpected error occurred while executing the specified Action
    18. When opening a Workspace in the Start Services scenario you get an unexpected error occurred
    Maybe when you look through the Analysis and Resolution you get some points.
    If it does not help please provide more information of the error that you get when activating the service.
    Regards,
    Holger.

  • Integration Directory - Business Scenarios organization

    Hi,
    In the Integration Directory for configuration, the business scenarios are the highest level for configuring a scenario.
    After creating many scenarios, it is becoming hard for me to manage logically related business scenarios. I am resorting to structured naming to keep logically related scenarios grouped together.
    Is there a better way that can be suggested ? Is SAP planning for similar grouping concept like software components / versions / namespaces for the configuration aspect too ?
    thanks,
    Manish

    The link ...
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/sap xi 2.0  customer developments modif. in integration rep.pdf
    still works !
    Regards,
    Homiar.

  • Terms of payment - how to cover my business scenario

    Dear experts,
    I am dealing with the following business scenario.
    A Sales rep proposes to the client a term of payment made up od several partial amount; for example let assume 3 partial amounts.
    The Rep proposes to the client a fixed date, representing the date of the first payment that the client has to do and the installments.
    For instance, the client's first date of payment is 1st february and then 1st march and 1st april.
    1st february is determined on the M/AM billling data set as 30 days after actual billing date
    Issue:
    If the actual billing date is not equal to the planned billing date, the result is that the client has to pay the first partial amount in a  date different fronm the one agreed with the Rep.
    Is there any way in SPRO in order to link the installment to other dates rather than to actual billing date? (i.e. planned billing date, custom date field)
    Thanks in advance

    Hi Kalyan,
    ...how to do automate start for a process in CE7.2...
    Create a new message event trigger and a new service interface(WSDL) in the process composer and link the service interface to the event trigger. Now assign the event trigger to the start event of your process as message event.
    On deployment, the EVENT TRIGGER you created is exposed as web service (can be verified in wsnavigator). Execute the web service to automatically start the process.You could have a web dynpro application to execute the web service on click of a button.
    Regards
    Sangeetha

Maybe you are looking for