Integration Directory - Business Scenarios organization

Hi,
In the Integration Directory for configuration, the business scenarios are the highest level for configuring a scenario.
After creating many scenarios, it is becoming hard for me to manage logically related business scenarios. I am resorting to structured naming to keep logically related scenarios grouped together.
Is there a better way that can be suggested ? Is SAP planning for similar grouping concept like software components / versions / namespaces for the configuration aspect too ?
thanks,
Manish

The link ...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/sap xi 2.0 customer developments modif. in integration rep.pdf
still works !
Regards,
Homiar.

Similar Messages

Solution Directory - Business Scenario

Hello,
I am trying to find the job management - job monitoring scenario under SAP ERP. I had everything set up under SAP ECC and still can see it there. But now that I switched my systems to SAP ERP, I would like to select it there, but cannot find it. I can still see the job management to be selected for SAP ECC.
Where do these scenarios (Business process repository) come from? We are on Solution Manager SPS 20.
Thanks,
Ingrid

One possible solution is to enable the checkin and checkout process with approval workflow active to ensure that misuse of access does not occur.

CTS transport in Integration Directory

Hello,
We are running NW70 SP13 and have fully configured CTS+ as per the SAP documentation for SP13 specifically.
In Integration Repository we can see the export option using CTS but in the Integration Directory for scenarios we do not see the "Transport with CTS mode" option...it is defaulted to File Transport and the field is not changeable.
Any ideas?

In the exchange profile make the following entry
com.sap.aii.ib.client.properties: com.sap.aii.ibrep.core.cms.,com.sap.aii.ibdir.core.cms.
for Integration Repository com.sap.aii.ibrep.core.cms.*
for Integration Directory com.sap.aii.ibdir.core.cms.*
Note:
Do not replace existing values; add the new value to the existing values.
Note:
These settings specify that the CMS transport entries are transferred from the server to the web client front end.
Refresh the Exchange profile parameter.
You can refer to link below
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Try now.
Gaurav Jain
Reward points if answer is helpful
Edited by: Gaurav Jain on Jun 17, 2008 10:01 AM

Unable to Load the Integration scenario into the Integration directory

Hi All,
I am new to using SAP XI.
Require your help on the following issue.
I have built an Integration scenario, added Component Type: Product Version, inserted actions and connections.
I did check for any errors. I found no errors.
When I am trying to load this scenario into the Integration directory its not showing up the scenario in the popup.
Navigation:
Directory > tools> Transfer scenario from repository
The status of Integration Scenario in the builder shows as
"Being processed".
I created the scenario 2 days back.
Can some one help me in this?
Regards,
Meher

Hi All,
Thanks to all who helped me.
michal,divija : Can you please let me know in details how to activate Business Scenario?
I did not create any business process.
Sridhar: I did releases some locks on my process, no luck.
Can you please explain me in more details?
Should I have a process build for my Integration scenario to be activated?
Thanks,
Meher

Business systems defined in SLD not visible in Integration Directory.

Hi,
After having finished with the SLD configuration involving defining the product, software component, TS and BS. Then I imported in the Integration Repository from SLD and then defined message interfaces, types etc. After that, in Integration Directory when I am trying to assign new business system (to expose business system of sld as service), it is not showing me the newly defined business systems of SLD in the Integration directory.
Please suggest me a possible solution for this.
Thanks,
noor

Hi,
It happens sometimes due to Meta Data Issue,
Go for SLD Cache :
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Still If you are not able to see the Business System when trying to import the business system. Go to Objects tab in ID --> Business System and you will find the imported Business System --> Right Click and ADD to Scenario.
Regards
Agasthuri Doss

Business systems not showing in I.D( Integration Directory)

Hi Guys,
I Completed the Configuration up to I.R( Integration Repository). in integration Directory i created a scenario. under Service without party when i am trying to assign Business systems. it is not showing any Business Systems. i already Created Business systems in S.L.D. any body have any idea why it is Happing. Thanks in advance.
Thanks
Kiran.B

Go to Objects tab and find your Buss. System. Right click on this and select add to scenario. Buss. system should be imported into ID only once.
If you cant find your Buss system in ID, then use the menu Environment --> Clear SLD data Cache.
Regards,
Jai Shankar

Integration directory problem while creating business service

HI,
CURRENTLY I AM FACING A PROBLEM IN INTEGRATION DIRECTORY. WHEN I TRY TO CREATE A BUSINESS SERVICE INSIDE THE SERVICE WITHOUT PARTY WHICH I AM TAKING AS A SENDER, I AM UNABLE TO GET THE SOFTWARE COMPONENT VERSIONS IN THE SENDER PARAMETERS.
IF ANYONE CAN GIVE THE COMPLETE CONFIGURATION STEPS FOR SENDER AND RECIEVER SYSTEM THAT WILL BE VERY HELPFUL.
BEST REGARDS,
MONA

Hi Mona,
Let me explain you in detail:-
First, Activate the Change List in the Integration Repository once the design objects are complete. By activating the change list, the object becomes available for Configuration in the Integration Directory.
Secondly, to transfer Integration scenario from Integration Repository - you need your Integration Scenario to be created correctly and when you run this wizard you actually pull the Integration scenario in the Integration directory.
You also have the option of 'Configuration Wizard'.
This tool is a wizard for creating your Recevier Determination, Receiver Agreement, Sender Agreement and Interface Determination. For this tool, you do not need the Integration scenario
It is not mandatory to use any of these tools to configure your scenario.
All you have to do for configuring your scenario is
1. Create Business system/Business service
2. Create Communication Channel
3. Create Receiver Determination
4. Create Interface Determination
5. Sender Agreement
6. Receiver Agreement
I hope this provides you a solution.
Regards.
Praveen

No Business Systems refresh in Integration Directory

Hello,
I'm working with an installation of XI NW 7.0 SR3 ABAP+JAVA on Windows
MSSQLServer.
I've created many outbound and inbound interfaces and imported idocs
too in a specific software component.
I've imported the busines system linked to the software componed in
Integration Directory but it didn't contain the I/O interfaces nor
imported idocs.
Result of this is that when I try to use Condition in Interface
Determination this error occured:
Problem loading Schema Description.
Message interface does not exist in any software components installed
on this business system.
Can you help me?
Thanks a lot,
Fabrizio

Hi,
If you get the following msg while selecting the BS in Receiver Determination
"Message interface does not exist in any software components installed on this business system"
1) Open ID-----Double click on Business system that which u are using in the scenario
2) Check whether you are able to see the SWC in the Othere attributes TAB
3) If it is not there means goto SLD----Open the Technical System of R/3 by choosing Web as ABAp type
4) Click on Installed Products TAB
5) Click on Add New product and add your Product of the SWC whcih you are using for developement and Save it
6) Then goto Business systems TAB in the same Technical systems window and click on the Business System appears in the window.
7) Click on Installed products and Check the check box of your Product and then finally save that.
Now you should be able to see the SWC in the Othere attributes TAB in ID
Regards
Seshagiri

Business system is not displaying in Integration Directory

Hi Friends,
i'm doing RFC to RFC scenario.. here.. upto IR(Integration Repository ) i did every thing fine.. but in ID(Integration Directory ) for assiging business systems i did't get one business systesm. in SLD part every thing i'm getting.. but here for adding the system into my scenario only i'm not getting particular one business system in OBJECTS list...
is it any authorisation problem... because for other users it was getting .. plz suggest me the solution.. for getting
thanks
Babu

Hi Babu,
Once the business system is imported from sld then you can assign that business system in any number of scenarios. You are telling tat other users are using it and if so then it should be listed in the object list..check if any one might have deleted the business system instead of removing from their scenario...and if so...you can see the business system in the imported objects from sld.
Thanks,
Prasanthi.

Cannot see business system in integration directory.

Hi all,
I am trying to configure a simple file to idoc scenario (from the starter pack) . I have created a third party technical system and assigned it to a business system.
I have configured the scenario as given in the exercise scenario in the integration repository.
In the Integration directory, i create a new configuration scenario . Now i go into the service without party , and try to assign a business system . However, here , in the list of business systems available from the SLD, i cannot see my business system . Could anybody help me find out why this is happening ?
p.s. while creating the technical system , i have given 'localhost' as host, since i didnt know what to give here and thats what most other technical systems in the SLD contained. could this be the problem ?
Thanks,
Joe.

Looks like the much abused points system is having a bad day on SDN
I am glad actually - will keep the spammers away
A Thank You is all that drives and should drive SDN
Regards
Bhavesh

No business system in integration directory error...urgent pl

Scenario: SAP800 to SAP812 via XI3.0 Using Idocs and IDoc adopter.
When I create a business system for SAP800 and SAP812 in integration Directory, it is not visble in the Integration server where I configured the Idoc adopter and thus the Idoc_inbound_asychronous is throwing a error back to SAP800" No service for business system SAP800 in integration Directory".
What may be the problem? And Pl help in Debugging the creation of business system in Integration Directory...
Thanks.

Hi,
make sure that the logical system names are properly assigened to the business systems in the Directory. To to so double click one of your Business Systems and select the menu entry "Adapterspecific Identifiers".
If the logical system name is not maintained here, make sure that it is so in the SLD (check the clients of your technical system in the SLD).
Maintain them, if necessary, clear the SLD Cache in the Directory (Menu: Environment->Clear SLD..), go to the Adapterspecific Identifiers (in edit mode) and click the second button to load the data from the SLD.
Did this fix the problem?
Regards,
Hans Christian

How to retrieve configuration scenarios in Integration Directory?

Hi All,
I am developing a Java program to read all configuration scenarios in Integration Directory. My plan is to find SAP's Java APIs available in the NetWeaver Java stack to read the info I need. I have done lots of searches for such the APIs but still got no luck. Could you help me out?
I'm on NetWeaver PI 7.1.
Thanks,
Viet
Edited by: Viet Phan on May 13, 2011 1:11 PM

Hi,
The 3rd party adapters must be installed via Deploy Tool or JSPM. But u should have a sda file with the adpater content.
see here for more details on JSPM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5006901f-925c-2910-5f98-9ae26cc07eca
Usually all these third-party developed adapters also developed pre-defined business content with mappings, but this does not mean that all the interfaces you have can use it. If you do not have any custom work, then you can automate it, but if there is custom work then you have to enhance or develop new maps.
For example, Seeburger has over 20 maps to convert EDI X12 to standard IDoc maps and vice-versa (INVOIC Idoc to 4010 etc).
http://service.sap.com/netweaver ->SAP NetWeaver in Detail -> Process Integration -> SAP Exchange Infrastructure ->SAP XI in Detail -> Connectivity.
Please reward points if it helps.
Thanks
Vikranth

Creating business services in integration directory

Hi
When business services are created in integration directory - these business services are not tied back to entries in the SLD - i.e we can create entries for business services directly in integration directory without having to import them from SLD.
Now, when we migrate - from Dev environment to other landscapes - my understanding is that these business service entries are going to be migrated with the same names -and no transport target entries / validations is made during the target system import time - which happens in case of business systems having entries in SLD....
Could anybody out there - clarify these thoughts about business service entries
Thanks in advance - for your time .

Hi Karthik,
Check out these help file links, hope this will help you:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/frameset.htm</a>
http://help.sap.com/saphelp_nw2004s/helpdata/en/e6/908d3f7057eb0ce10000000a114084/frameset.htm]
Regards,
Subhasha ranjan

Importing new business systems into Integration Directory PI 7.1

Team SDN,
Team We have presently upgraded to PI 7.1(inline upgrade XI 3.0 was the older version). There are some changes like Import of software component version from SLD to ESR. intially we use to do in Xi 3.0 by selcting tools and import, but now we have to do different manner like going to ESR click on new and under work areas we have SCV. Do we have any new procedure fro importing business system into integration directory PI 7.1.
Please share with members if wht are the new changes in PI 7.1 work proceses like the one i mentioned above importing SCV(please don't start ESR and blah blah) any real issues wht we will encounter in termsof PI 7.1
Thanks SDN.

Hi Madhu,
If you want to create a communication component for a business system from the System Landscape Directory (SLD), choose the Business System menu option.In the wizard, select a business system from the SLD and create a communication component for it in the Integration Directory.
refer below link..
http://help.sap.com/saphelp_nwpi71/helpdata/EN/3e/60653f0c9fa075e10000000a114084/content.htm
Regards,
Raj

Error while assigning Business Systems in Integration Directory

Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.

Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
Ahmad

Integration Directory - Business Scenarios organization

Similar Messages

Maybe you are looking for