Solaris 11 ssh ControlMaster support?
I am trying to run use "net::openssh" perl script, which is using ssh multiplexing i.e. ControlMaster, and I am getting an error illegal option -- M..., is there any way to turn on multiplexing on Solaris 11 in the ssh client, or we are forcd to compile from source?
perl script used
#!/bin/perl -w
use Net::OpenSSH;
my $ssh = Net::OpenSSH->new(
host,
ssh_cmd => '/bin/ssh',
timeout => 10,
user => user,
password => passwd
my @cmd = (ls => '-a');
$ssh->system(@cmd);
The script returns the errors below.
/bin/ssh: illegal option -- M
/bin/ssh: illegal option -- S
ssh: illegal option -- M
Usage: ssh [options] host [command]
Options:
Thnaks,
Eli
unfortunately I didn't find any workaround, Solaris SSH is an old fork of openssh and dose not support the multithreading option. I cant comment on your Solaris 11 > Linux environment, most of our environment's where migrated from 10 to 11.1, and all I can say is Solaris rocks, features you find in Solaris you can find on any other OS in the market just to name a few ZFS, BE, IPS, FMA, SMF, etc..
Thnaks,
Eli
Similar Messages
-
I understand that Linux depends on the communities support to develop drivers for hardware that isn't supported by the manufacturer. How does Solaris stand with support from manufactures, and support from Sun or popular manufactures. I'd like to install Solaris 10 on my x86 desktop, but if it can't support my nForce video chip then there isn't much of a question that I would stick with Linux.
Is it possible, specifically for an nForce video chip, to get just video that doesn't necessarily take advantage of graphic acceleration?
Since nVidia is partnered with Sun to bring some of their high-end cards to Solaris, should we expect to see some of their other hardware supported also?
I'm curious about other hardware as well, such as Ethernet cards, or sound cards. Is it really feasable to run Solaris on a desktop PC, or does it need to be dedicated Solaris machine that was built from the ground up with support in mind because supported hardware is so scarce?The answer isn't easy to find, because the breadth of the
problem is wide.
As I write, I'm on an Athlon-64 running a NVidia nForce3
250 Gb chipset. Does it work? Yes. Does everything work?
No. There are some parts of the chipset which don't have
Solaris drivers yet. Unfortunately, NVidia also keeps their
driver source close and even for Linux they don't release
the source code. In my case, neither the network nor audio
drivers are available. It may be difficult to get the Solaris drivers
ported unless NVidia does the work. AFAICT, that is not
part of the Sun/NVidia announcement, though I'd be happy
to be proved wrong.
A number of sound cards do have drivers. On this machine,
the NVidia audio driver is not recognized, but I have an iMic
USB audio dongle that seems to work well.
For Ethernet, I have an old Rhine-based card (D-Link). A
driver for this, including the needed 64-bit amd64 driver :-),
is a available from
http://homepage2.nifty.com/mrym3/taiyodo/eng/
Some other vendors offer Solaris drivers directly, so you'll
find some have more support than others.
-- richard -
Whether the solaris 11 is support gb2312?
Hi all,
I use this command in solaris 11
iconv -l
The following are all supported code set names. All combinations
of those names are not necessarily available for the pair of the
fromcode-tocode. Some of those code set names have aliases, which
are case-insensitive and described in parentheses following the
canonical name:
GB18030 (GB18030, GB-18030, GB_18030, GBK, zh_CN.gb18030, zh_CN.gbk)...
i use this command in solaris 10
iconv -l
canonical name:
zh_CN.euc (GB2312, GB-2312, GB_2312, EUC-CN, EUC_CN, eucCN), zh_CN.gb18030,
zh_CN.gbk (GB18030, GB-18030, GB_18030, GBK, zh_CN.gb18030), zh_CN.iso2022-7, zh_CN.iso2022-CN (zh_CN.iso2022-7)
I want to know whether the solaris 11 is support gb2312?
I have a software run on Solaris system ,an the software need GB2312 code support ,on Solaris 10 the software Can be normal operation,but on Solaris 11 there has some problems,so I want to know the Solaris 11 is not support gb2312 code?Try the following:
# pkg search /usr/lib/iconv/GB2312%UTF-8.so
INDEX ACTION VALUE PACKAGE
path file usr/lib/iconv/GB2312%UTF-8.so pkg:/system/library/iconv/unicode@...
Most likely, it will be enough to run the following to install the library:
# pkg install library/iconv/unicode -
How to make Solaris 8 UNICODE supported
My Solaris 8 doesn't support UNICODE. That's why, I can't write � in a file.
I think UNICODE support will remove this problem
How to make Solaris 8 UNICODE supported.In the initial "dtlogin" screen, select a "UTF-8" locale when you login.
You may have to install additional locale files for UTF-8 support from the Solaris "Languages" CD. -
Does solaris dhcp server support user class
Does solaris dhcp server support user class(option 77). In my environment, solaris dhcp server seems just ignore this option set in the client dhcp discover.
Does anybody can help me.The clients are all Windows 7 x64 (but I've replicated the problem on MacOS and Solaris clients). The server is Solaris 11 x86.
For the problem to be the ARP cache, wouldn't the client's MAC address have to change during the reboot (i.e. the change in the client's MAC address is what causes the ARP cache to get confused, and hence the client gets blocked because of the MAC mismatch)?
Edited by: user13534003 on May 9, 2012 1:43 AM
Edited by: user13534003 on May 9, 2012 1:46 AM -
Does Solaris 11 Express support 8vCPU?
I am trying to install Solaris 11 Express Live DVD on Vmware ESX 3.5. I am facing issue while creating VM with 8VCPU.
Does Solaris 11 express supports that? Pleas send me the link if any which states that?My posting above regarding the T510 is an Intel Core i7 620m - as stated, works fine - 2 Cores, 2 threads per core, 4 vCPUs
psrinfo -v output
Status of virtual processor 0 as of: 12/08/2010 14:45:10
on-line since 12/08/2010 08:10:57.
The i386 processor operates at 2660 MHz,
and has an i387 compatible floating point processor.
Status of virtual processor 1 as of: 12/08/2010 14:45:10
on-line since 12/08/2010 08:11:00.
The i386 processor operates at 2660 MHz,
and has an i387 compatible floating point processor.
Status of virtual processor 2 as of: 12/08/2010 14:45:10
on-line since 12/08/2010 08:11:00.
The i386 processor operates at 2660 MHz,
and has an i387 compatible floating point processor.
Status of virtual processor 3 as of: 12/08/2010 14:45:10
on-line since 12/08/2010 08:11:00.
The i386 processor operates at 2660 MHz,
and has an i387 compatible floating point processor. -
Whether solaris 8 os support dual cpu machine?
Hello :
Whether solaris 8 OS support dual-processor machine , When i install solaris 8 in a dual
process machine , I always can't install solaris OS .
Thanks !
FutureFor Intel Architecture it is important that the system is in the HCL
(Hardware Compatibility List)
The list is available at:
http://soldc.sun.com/support/drivers/hcl/index.html#S8
SUN cannot guarantee that Solaris will work on every Intel Dual processor system.Once the machine is tested the machine is available in the HCL list.
HTH
-Dhruva -
What versions of Solaris should we support?
What versions of Solaris are officially supported by Sun? I notice that there are patches available for older versions but the compiler tools are not supported on these platforms.
We would like to drop support for 2.6 and possibly 7 but only if Sun no longer supports these versions.Well, if you are asking what supported Solaris OS that compiler tools will run on, here is the link:
http://developers.sun.com/tools/cc/support/support_matrix.html
However, if you are asking what versions of Solaris Sun support, you will need to ask the marketing or try 'Solaris OS' on http://forum.sun.com/
Thanks.
Rose -
How to configure solaris 7 to support unicode(Arabic)
hi all,
I have a problem in configuring solaris 7 to support Unicode(Arabic). Anyone know about this pls give me the guidelines to configure the environment variables, etc.,
-Thameem.hi all,
I found out the solution. Its working properly.
-Thameem -
How many LUNs does an Solaris Host can support ?
Hi ,
Anyone can share, how many storage LUNs does an Solaris Host can support? There is any limits on this.?
Regards
SivaIt probably depends at least some on the type of HBAs, the driver, topology, and most likely other things as well. Instead of dealing with thousands of LUNs on the OS side, I would highly recommend you have your SAN team start provisioning meta devices instead, to cut down on the number of devices (if you are lucky enough to have a SAN team that is). My company allows me to be the EMC and Solaris engineer, and in return all they ask is that I only collect pay for one of the two....
-
I am currently attempting to activate IPSecurity on Solaris and I am having a host of issues. I am hoping someone on the forums have done this before.
Here are the steps that I have figured out:
1) Create Certificates and add them into the database: I am fairly certain that this has been done correctly since when the in.iked daemon comes up it reads in my CA certificate and my server certificate that I have created.
2) Edit the /etc/inet/ike/config file. I have edited this file but there is an odd thing here. Looking at the man page it says that I should be able to do use AES for the phase 1 SA. However when I use the key word for the aes it tells me it is an error. <Question> Is the AES support only on 10? Is there away I can tell the version of the in.iked daemon I am working with?
3) Activate the in.iked server with the config file. I have done this and used the -p2 -d options so I can see the log file that goes with it.
4)Update the /etc/inet/ipsec.init file: I have done this but here is another instance that things do not make sense. I create a phase 2 proposal devoid of all encryption algorithms and the default one came up. It only had AES and Blowfish. There was no Triple DES option available even though in the man page is there. <question> how do I get the version number of the ipsecconf command.
5)I then use the ipsecconf command to suck in the ipsec.init profile. I have done this successfully with AES and can do a list display.
Usage<<<< I attempt to run a traffic from my solaris to my partner machine that matches the phase 2 traffic descriptors however when the traffic arrives it is not encrypted and the solaris did not attempt to negotiate a tunnel.
When I attempt to initiate a VPN from the other side all I get is parameter mismatch on the Solaris side however the parameters that I have configured all seem to match.
<Questions>
1) Is there some better messages available above -p2 -d
2) Is there a way to initiate a phase 1 negotiation on the SA. ikeadm command does not seem to have that.
3) Is there a service that I have to activate to start the IPSecurity pieces?http://www.sun.com/servers/coolthreads/t2000/specs.xml
no.
Darren -
I have heard that Solaris 10 does not have built in support for NTFS filesystems. I have a NTFS-formatted external USB 2.0 drive that will not mount onto a Solaris 10 guest in a VirtualBox environment (Windows XP x64 host). Are there any plans to build NTFS support into Solaris 10? I heard the fuse project will enable such support in Opensolaris.
Thank you...Download http://www.belenix.org/binfiles/FSWpart.tar.gz
gunzip FSWpart.tar.gz
tar -xvf FSWpart.tar
pkgadd -d .
mount -F ntfs /dev/dsk/xxxxx /ntfs
Regards,
RTA -
[SOLVED] ssh-agent support removed from kde-agent
Hi all,
Since its upgrade yesterday, kde-agent does not support ssh-agent anymore (see here). I consequently can't store unlocked SSH keys anymore, because ssh-add from a konsole can't connect to ssh-agent.
The update note above mentions that the SSH agent is not needed by KDE since years. What's the recommended way to start it now ?
Thanks a lot !
Aurélien.
Last edited by aurelieng (2014-01-03 08:39:49)I have been using ssh-agent with KDE on a daily basis for years and AFAIK, there is no better or more convenient way of keeping your private keys available. So in my opinion, the removal of ssh-agent, a tiny daemon that doesn't do any harm yet serves its purpose very well, was a bad idea.
I found a solution that does not run multiple ssh-agent daemons, even if KDE crashes. The solution is based on the fact that ssh-agent can be used as a wrapper around a session startup script or program. Unfortunately, my solution is very intrusive and will disappear on each KDE update. It works as follows:
# cd /usr/bin
# mv startkde startkde-inner
# cat > startkde <<- HERE
#!/bin/sh
exec /usr/bin/ssh-agent /usr/bin/startkde-inner
HERE
# chmod +x startkde
Now the ssh-agent will be started on each KDE session and there will always be only one ssh-agent per KDE session. Comments in the startkde script suggest starting ssh-agent later in the process and then killing it on logout. However, such a solution is inherently unreliable, because it will not kill your ssh-agent when the X-server or KDE crashes. The same problem applies to starting ssh-agent from profile scripts. The wrapper method resolves the issue in a quite reasonable way.
Last edited by andrej.podzimek (2014-01-08 13:27:25) -
[Feature Request] Wap321 SSH/Telnet Support
Dear Cisco Developers,
we are facing a problem with your design choice of not to support Telnet/SSH on the Wap321. We bought this Product because it was one of the only Access Points with SSH and Telnet Support.
We need the SSH Support for a script that changes the WPA-psk key of the interface wlan0 on more then 20AP's every Week. Everything was good until we got hold of a new charge which came with firmware version 1.0.1.10.
Changelog:
"Due to security concerns, Telnet and SSH access options are removed in firmware version 1.0.1.10."
So I talked with the German Cisco Small Business Support and he said he will investigate and try to get it to the Second Support tier. Well it never came to that, he called us two days later and said that is was a BUG to Support SSH and Telnet on the WAP321 and it was never designed to be a Feature.
So i guess we have following options:
1.Bring back the SSH Support for the Wap321 in the next Firmware update
2.Provide Firmware version 1.0.0.3
3.Give me a Workaround for my task
So any help would be appreciated and i hope we are not the only ones that would like to see a comeback of this feature.
In hope for comments
Best wish
Fabian Schwarz
(PTA-Support)
PS: Support Ticket was
624972937No Sir I do not.
According to the response from L2:
SSH is only enabled for customer to use it on switches.
Developers normally do not allow SSH (enable or protect with password) for end
user on any Wireless device. Management is done by web interface.
In this particular case SSH was enabled only due to some bugs which were
monitored during first release so it is not meant to be for end user.
Because of particular security risks, SSH is for troubleshooting by developers.
Currently there is no chance that they would issue any official firmware for this as
well as there is a little chance they would create special firmware for just a few
customers.
I am sorry for any inconvenience that this has caused.
Eric Moyers
If you like you can roll the mouse over my picture and get my actual email address and contact me directly. -
Jdk131 of wls 6.1 sp2 on Solaris 7 doesnt support -server option?
Greetings
I installed, wls 6.1 sp2 on Solaris 7.
But it seems the built in jdk131 that installed doesnt support
-server option.
i checked the jdk131/jre/bin folder, but i dont see any client, server folders...how
is this possible?
how to correct this?Yes i tried that, but it says, incorrect option, JVM could not be created.
any was i cd identify is the install binary was correct?
like any indication in jdk131/jre/bin folder?
Kumar Allamraju <[email protected]> wrote:
i think it does.
Have you tried to start with java -server weblogic.Server?
Are you getting any errors?
Kumar
vinay wrote:
Greetings
I installed, wls 6.1 sp2 on Solaris 7.
But it seems the built in jdk131 that installed doesnt support
-server option.
i checked the jdk131/jre/bin folder, but i dont see any client, serverfolders...how
is this possible?
how to correct this?
Maybe you are looking for
-
It is crazy but in the apple store they set up the icloud for me and then I started sync the iphone against the icloud and i had some photos in streaming because they recommended to do like that. After that, the space got not enough and they asked fo
-
Hi, I have created a project containing some methods with LabWindows/CVI 8.0.0 and then build the project and generated the DLL and LIB files. These DLL and LIB files are working fine in another projects created in LabWindows/CVI 8.0.0 (even on anoth
-
Using Outlook, when i double click my email, i get a request to download a Firefox document 6.6kb titled C9C0D463-9F23-4F30-86B0-FCA6.html. Is this a valid, virus-free file from Firefox? What does it do? I am reluctant to load fearing a virus is atta
-
Hi<BR><BR>I am having problems with HBR (EAS).<BR><BR>First I can not see the business rules in the planning form or the web. I went to the scripts in EAS and tried to get into any of them and see what the problem is. <BR><BR>What I am getting is an
-
CS6: Fonts substituting when printing
Today is my first day using CS6 and all of a sudden some of my fonts are substituting (to a default font) when I print. The print preview looks normal. These are the exact same files I've been able to print with no problem in CS5. I tried setting Co