Solution Manager: Central system administration

Hi,
We need to configure central system administration in solution manager.
Could you please provide step by step documents.
Regards,
Bala.

Hello Bala,
You should find this link useful [Here|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Hope this information is helpful.
Regards,
Paul

Similar Messages

  • Solution Manager - Central System Administration - Task list is wrong

    Hi,
    Solution manager 7.0 EHP1, System monitoring, Central system administration I have copied another customizing session,
    updated task list but strange mixed list of tasks appeared: some tasks are visible even they do not exist in new one.
    Thanks for help.
    Dalibor

    >
    Dalibor Cip wrote:
    > Hi,
    > Solution manager 7.0 EHP1, System monitoring, Central system administration I have copied another customizing session,
    > updated task list but strange mixed list of tasks appeared: some tasks are visible even they do not exist in new one.
    > Thanks for help.
    > Dalibor
    Have you already seen
    [SAP Note 1097862 - Incorrect no. of tasks in SAP Solution Manager overview|http://www.service.sap.com/sap/support/notes/1097862]?
    It contains also instructions how to fix inconsistencies.
    Best regards,
    Ruediger

  • Unable to switch Central System Administration into Change Mode

    Hi,
    I am bit rusty on the Solution Manager - Central System Administration.
    While experimenting with my Solman system I did the following.
    1. Logged into Solman and started transaction Solution_Manager
    2. Switched to the Solution that has been configured and then followed Operations Setup->Solution Monitoring -> System Administration -> Central System Administration for <My System> (here my system is the system I wish to monitor).
    3. After following the navigation to the selected item as described in step 2, I selected the menu items Session Components->Complete.
    4. After this action of selecting the Complete session from the menu, my Central System Administration for <My System> is continuously showing Display Mode.
    I am unable to switch back the system to Change Mode.
    Am I missing something ? What needs to be done ?
    Regards,
    Siddhesh

    Siddhesh Ghag wrote:>
    >
    > 3. After following the navigation to the selected item as described in step 2, I selected the menu items Session Components->Complete.
    >
    > Regards,
    > Siddhesh
    This was the wrong step. By setting the Session Component to "Complete", no further changes are allowed (and you receive a pop-up).
    The procedure to reopen the session component is not documented for customers. Please create a customer message on SV-SMG-MON-CSA, open the service connection and provide logon information.
    You might state my name in the message, I will then assist the message processor.
    Best regards,
    Ruediger Stoecker

  • Central system administration (CSA) in solution monitoring

    Hello,
    I want to configure my solution manager for central system administration (CSA) which is a service provided under solution monitoring of transaction dswp.
    I couldnt find any documents for this configuration.
    Could you please help me out..
    Regards,
    Gurudath Pai

    Hi Gurudath,
    If you have an s-user id, step-by-step tutor files with screenshots are available at
    https://service.sap.com/rkt-solman > Solution Manager > Solution Manager 7 > Technology Consultant & System Administrator > System Monitoring, Administration
    Before configuring CSA, you have to:
    1. Perform basic settings for Solman (use wizard based approach)
    2. Setup the system landscape
    3. Create solution
    4. Now you can configure CSA
    Revert if you need clarifications
    Prasad

  • Not able to find Central System Administration

    Hi,
    We are trying to configure the Central System Administration in our Soultion Manager version 4.0 for the Development server running on ECC 6.0.
    We have created systems, generated RFC's, defined logical system and and also created Solution Landscape for the Development Server in the Solution Manager System.
    But when we go to the transaction DSWP>Eneter the Development Solution Landscape>Solution Minitoring>System Monitoring/ Administration>Operation Setup, We rae unable to find the Central System Administration configure icon.
    Please suggest the possible reason for this and a way to view the Central System Administraion configure Icon.
    Thanks and Regards,
    Abdul Khyoom A.

    Hi Abdul,
    CSA Setup should be visible via this path:
    - dswp
    - open solution landscape
    - choose Operations Setup -> Solution Monitoring -> System Administration
    - here you should see for each system in the Landscape an entry for: Central System Administration
    What's the Support Package Level of you SolMan system?
    Best regards,
    Ruediger

  • Central System Administration - Monitoring question

    We are trying to setup the Central System Administration/Monitoring in solution manager. However, when we go into the setup of the tasks, such as "Checking for ABAP Short Dumps", when we click on the "Start ST22" button, it doesn't do anything.
    Has anyone had an experience with figuring out how to get those buttons to work and to connect directly into the system we are doing the task?
    We did follow Note 128447 to setup the Trusted RFC's between the systems, but that doesn't seem to working correctly either. Could that be the reason that this isn't working correctly?
    Thanks in advance for any replies.
    Dale Dingmann

    Hi,
    May I know how did you configure your CEN monitoring, using agents, or using RFC.
    And where you are checking the ABAP dumps on Workcenter?? will you able to get the other details like Job failure, if you click that, wil you able to reach the satellite system.
    and check below are available.
    SM_<SID>CLNT100_READ
    SM_<SID>CLNT100_TWM
    SM_<SID>CLNT100_TRUSTED
    if you use RFC monitoring these 2 also required,
    <SID of the monitored_system>_RZ20_COLLECT
    <SID of the monitored system>_RZ20_ANALYZE
    Thanks,
    Jansi

  • Mail a Central System Administration report

    Hi,
    We are started with the configuration of the CSA (Central System Administration) on Solution Manager.
    Each check session is available on a HTML and/or MSWord report.
    Now I want to mail these report to a mailbox on a regular basis.
    I wonder if that is possible.
    I cannot find any information about that.
    The SAPConnect (SCOT) is well configured.
    Hope somebody can help me out
    Thanks
    Paul

    Did you ever get this working?   Also have you found a way to combine CSA reports from multiple systems into one report perhaps?

  • Auto email Transmission for Central system administration

    Hi Experts,
    I want to setup an auto email transmission for "Central system administration" report in solution manager.
    If anyone aware of the process, please guide.
    Thanks,
    Basis Consultant

    Hello,
    To setup CSA you will need to perform three important pre-requisites if you already have not done so.
    > Create a Solution Landscape
    > Setup the RFC connections between Solution Manager and the Satellite systems in your Solution Landscape
    > Assign the Solution Monitoring Roles to the users.
    In terms of the Automatic Email Notification it is currently not available as a standard functionality. 
    Thanks,
    Mark

  • Can Central System administration be configured for JAVA systems?

    I know, we can configure Central system administration (DSWP -> Solution -> Operations Setup) for ABAP and ABAP+JAVA systems.
    Can some one tell me, can it be configured for JAVA systems like Portal?
    Thanks
    Aditya

    Hello Aditya
    Unfortunatelly Java only systems are not supported by CSA in EHP1. The CSA infrastructure is currently being overhauled and as a result of this, pure Java systems will also be covered starting with the next release of SAP Solution MAnager (SAP Solution Manager 7.1) The availability of this next release will be this year, but I am not yet sure when exactly. You can check further info in www.service.sap.com/solutionmanager -> in the last line of this page there is a link to get detail about this version Ramp-Up.

  • Central System Administration in Workcenter - Remote Logon Issue

    Hi,
    We have a problem in our Solution Manager and we would like to know if is possible to fix it.
    We have configured Central System Administration correctly for our satellite systems. We have configured some tasks and we are able to do remote logon to run some transactions in the stallete systems.
    The problem comes in the Workcenter via web. In the workcenter we access to the Central System Administration and when we try to do remote logon to the satellite system nothing happens.
    Anyone knows if it is possible to do remote logon to the satellite systems using workcenters?
    Thanks,
    Roberto

    From the transaction SOLMAN_WORKCENTER, navigate to the System Administration tab.
    From the menu on the left select the task "Administration Tools".
    Select your system from the table on the right
    At the bottom of the screen you will see "Details for system <SID>"
    Select the client and the RFC from the drop down menu. 
    You should see a list of Tools for Application Server with corresponding TCODES.  If your selected RFC is functioning properly and the user ID specified in the RFC has the correct authorizations you should be able to log on remotely by clicking on the link provided.

  • Central System Administration

    Hi,
    I have added all satellite systems to Solution manager .Please tell me the steps to configure Central System Administration in solution manager.
    Thanks & Regards
    Shashi Singh

    Hi,
    Check these
    https://websmp201.sap-ag.de/~sapidb/011000358700000059822008E
    https://websmp201.sap-ag.de/~sapidb/011000358700006932602005E.sim
    https://websmp201.sap-ag.de/~sapidb/011000358700000038202008E.sim
    https://websmp201.sap-ag.de/~sapidb/011000358700000038182008E.sim
    This should solve your problem.
    Feel free to revert back.
    -=-Ragu

  • Solution Manager Setup System Monitoring DB Administrating Alerts

    Greetings experts
    Can someone please explain how I can get "DB Administrating Alerts" to display in Solution Manager.
    Satellite system (FSD) database MTE's are all active (RZ20).
    Tcode: DSWP / tab:Solution Monitoring / tab:System Monitoring /
    Service: Setup System Monitoring
    Tree:
    Setup System Monitoring
                           +-->  SAP System FSD 1320011126
                                                             +-->  Database FSD-DATABASE                                                                               
    |
                                                                                    +-->  Administrating DB FSD-DATABASE (DB2 6000)                                                                               
    Issue: DB Administrating Alerts do not display.
    *Solution Manager 7.01 SP3 / DB2 09.05.0002 / AIX5.3
    Regards
    Peter Babbington

    HI
    1.Do i need to configure the CCMS_OnAlert_Email, for every alert that you have, in the satellite system?
    Best thing I would say is to copy method ( RZ21 --> Method --> Method definition )CCMS_OnAlert_Email to Z_CCMS_OnAlert_Email in Solman and assign this auto reaction to  MTE class of satellite systems.
    2. How do i configure this out of solution manager, and bypassing the satellite system?
    You have to install/configure sapccm4x( for monitoring abap ) on satellite systems by giving details about Solution manager. Then the alert will be sent to Solution manager from satellite system and the configured auto reaction will send mails .
    Also go through the links
    http://service.sap.com/moniotring
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
    http://service.sap.com/rkt --> Solution manager --> Solman Manager < rel > --> Technology Consultants and System Administrator
    Thanks
    Prince Jose

  • Desktop gadgets are managed by system administrator

    Dear Windows Team,
    Some time back I had turned off the gadgets from my desktop. Now when I am trying to show the gadgets again, while clicking on the gadgets, it comes out with a message "Desktop gadgets are managed by your system administrator". It is my
    personal computer and no one else is the system administrator.
    I have already tried out multiple solutions available for this query , but could not get the problem solved yet.
    Can someone help me on this.
    Regards,
    Priyabrata Tripathy

    Hello,
    Have you tried this solution?
    http://social.technet.microsoft.com/Forums/windows/en-US/c182390e-f4bb-4d7a-93ea-1f411525c7f6/desktop-gadgets-are-managed-by-your-system-administrator?forum=w7itproui

  • Create New Service Session at Solution Manager = Product System missing

    We have installed SAP EHP 1 for SAP Solution Manager 7.0 last year but not really use it.
    We have setup in the system landscape:
    Server (ecc6sbx)
    Databases (MCD)
    Product System (MCD) => SAP ERP
    Assigned them to logical component (eg ZECC6DEV)
    RFC destination for MCD was generated
    SDCCN Administration at solutions manager display MCD with SDCCN status in green color.
    At the satellite system MCD, SDCCN Maintenance job was created and scheduled. Initial single run was also done.
    There were no issue. Connection to SDCC_OSS was fine.
    Back to the SOLUTION_MANAGER transaction, we created a new solution ECC ERP - Development.
    In the Solution Landscape => Solution Settings, we have assigned the Logical Component into the System Group.
    However when we expand the tree, and click on the Servers folder it did not display anything.
    Click on the Product Systems also did not display anything.
    We have another Solution Manager which display information on those Servers and Product Systems folder for satellite system.
    Going back to the Solution Manager for the Solution ECC ERP - Development, I tried to Create New Service Session for EarlyWatch Alert. When  I click on the Create button, I could only see SAP EarlyWatch Alert for Solutions, there is no SAP EarlyWatch Alert for the Reference Object MCD (<installation number). I could not create a session for MCD.
    Does anyone have ideas what I am missing here? I am trying to attached a document which have print screen for reference while creating this message, but there is no such function here.
    Adding to link to the document file contain print screen
    [Wihtout System and EarlyWatch Selectable.doc|http://www.easy-share.com/1915633524/Wihtout System and EarlyWatch Selectable.doc]
    [With System and EarlyWatch.doc|http://www.easy-share.com/1915633514/With System and EarlyWatch.doc]
    Edited by: Steven Foo on May 24, 2011 8:00 AM
    Edited by: Steven Foo on May 24, 2011 8:18 AM

    Anyway, in the solution manger  how to we setup earlywatch alert for the SM SID host itself (source system)?
    I have the information on the below from our solution manger
    The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
    Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
    Typical sources of errors are:
    The RFC connection for the SAP Solution Manager system is not working.
    The 'Task Processor' background job, which collects the session data, has been changed.
    Problems arose while data was being collected (see the detail log for the task that collects the session data).
    A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
    I tried to go SDCCN on the solution manager itself and look at the Maintenance Service Definitions:
    I get the information:
    No suitable RFC Destination found in SDCCN settings.
    When I click ok I get the following
    No RFC destionation to source system of service definitions available
    Delete Service Definitions (radio button selected).
    I did not continue and cancel it as I did not want to delete anything.
    I check the Task Processor background job is running at SM host itself.
    I managed to get the Maintenance Package job running. However it failed with the following
    Error refreshing service definitions from destination SM_SSMCLNT001_BACK
    Source and target system may not be identical SSM
    The source and target system is the same ==> SSM, will this be an issue?

  • Solution Manager - Central Monitoring

    Hi,
    I keep on hearing the buzz word that Solution Manager would be used as central monitoring from PI 7.1 or later.
    Can anyone explain more about this?
    I was assuming that solution manager is just to store all the documents and processes.
    Regards
    Krish

    Krish,
    pl refer below links-
    Pi Alert Framework centrally Monitored from SAP Solution Manager
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d05c14c3-34af-2b10-a1b1-fa2a39e0d2ae?QuickLink=index&overridelayout=true

Maybe you are looking for