[solve] Screen resolution changed after upgrading xorg please help?

Ive been using arch for almost a year now and have grown to like it a lot. I recently updated my system with pacman -Syu. during this process my xorg was updated and now im having issues.
I usually run my monitor at 1152 x 864 running at 85 for a refresh rate. Id like to continue doing that.
Since updating i now run at 1280x720.
Everything looks retarded as a result.. and id really like to get things back to normal. Ive pasted my xorg.conf here.. the modeline for the correct resolution is still there but it would seem xorg isnt respecting it.
I will admit to using a REALLY old radeon graphics card (radeon 7000) but it has never been an issue in the past with arch or any other distro.
Please help me restore my usual openbox display settings.
Thanks.
thewayofzen
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/artwiz-fonts"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "int10"
Load "vbe"
Load "record"
Load "GLcore"
Load "dbe"
Load "xtrap"
Load "dri"
Load "glx"
Load "extmod"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 240 # mm
Identifier "Monitor0"
VendorName "DEL"
ModelName "DELL D1025TM"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync 30.0 - 85.0
VertRefresh 50.0 - 120.0
Modeline "1152x864_85.00" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
Gamma 1.71
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "AccelDFS" # [<bool>]
#Option "PanelOff" # [<bool>]
#Option "DDCMode" # [<bool>]
#Option "MonitorLayout" # [<str>]
#Option "IgnoreEDID" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "MergedFB" # [<bool>]
#Option "CRT2HSync" # [<str>]
#Option "CRT2VRefresh" # [<str>]
#Option "CRT2Position" # [<str>]
#Option "MetaModes" # [<str>]
#Option "MergedDPI" # [<str>]
#Option "MergedXinerama" # [<bool>]
#Option "MergedXineramaCRT2IsScreen0" # [<bool>]
#Option "MergedNonRectangular" # [<bool>]
#Option "MergedMouseRestriction" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "BIOSHotkeys" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "ConstantDPI" # [<bool>]
Option "AGPMode" "4"
Option "AGPFastWrite" "True"
Option "EnablePageFlip" "True"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
# SubSection "Display"
#DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1200x720" "1152x864" "1024x768" "800x600" "720x400" "720x350" "640x480"
EndSubSection
EndSection
# Viewport 0 0
# Depth 1
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 4
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 8
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 15
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 16
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 24
# EndSubSection
#EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Last edited by thewayofzen (2007-11-16 12:22:55)

Is there anything insteresting in /var/log/Xorg.0.log? Have you tried switching the driver to vesa?
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/artwiz-fonts"
EndSection
Section "Module"
Load "bitmap"
Load "ddc"
Load "int10"
Load "vbe"
Load "record"
Load "GLcore"
Load "dbe"
Load "xtrap"
Load "glx"
Load "extmod"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "DEL"
ModelName "DELL D1025TM"
Option "DPMS"
EndSection
Section "Device"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "Radeon RV100 QY [Radeon 7000/VE]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1152x864"
EndSubSection
EndSection
Try using the above as your xorg.conf file - I've cleaned it up a bit and removed everything that's not essential. If it works you can always add all the that you need from your old xorg.conf file and if it doesn't - well, I guess it won't hurt to try...
Last edited by fwojciec (2007-11-14 07:09:02)

Similar Messages

Screen Resolution changes on published file - please help

Hello,
I currently have my screen res in my projects set at 1024 x 768 - on some files (not all) when I publish the output generates with a resolution of 1220 x 1220???
I have absolutely no idea how this can be possible as I have checked and double checked my project size etc...
Does anybody have any suggestions?
Thankyou
ali

Yes it did help, in the respect that I felt confident that it wasn't anything to do with my project settings. The published files became corrupted when they were copied across to our intranet server.
thankyou
Alison McLeavy
Electronic Health Record Program
Mater Health Services
t: (07) 3163 6144 e: [email protected]
f: (07) 3163 2685 w: www.mater.org.au

Screen resolution changes after opening PDF in preview and is enlarged.

Screen resolution changes after opening PDF in Preview and is enlarged.

Do a backup.
Quit Preview.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Remove the following. You may not find them all.
Containers/com.apple.Preview
Preferences/com.apple.Preview.LSSharedFileList.plist
Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
Saved Application State/com.apple.Preview.savedState
Credit Linc Davis for this solution.

[Solved] Problems with xinit after upgrade xorg-xinit to 1.3.4-2 versi

Hi,
Today I've upgraded my system with pacman -Syu and after upgrading xorg-xinit to 1.3.4-2 version I cannot use X.
When I run "xinit" then single white window appears but there is not any reaction for mouse or keyboard events.
I cannot even get back to VT by ctrl-alt-Fx or switch on/off NumLock. The only reaction on keyboard is issuing sysrq commands (ctrl-alt-sysrq E) which kills X.
I also discovered that running following command helps: "xinit -- vt12" - I mean it launches X and mouse and keyboard are working fine.
Is this a bug or I have misconfigured system?
Last edited by wtx (2015-03-23 15:08:14)

I can confirm what appears to be the same problem on my two machines running Arch with systemd. On both machines, after upgrading the xorg-* packages yesterday, X would not start as it normally did: I'd get a blank screen with only a _ up in the top left corner. Pressing ctrl-alt-(number) had no effect, nor did anything else I tried. (I didn't try killing X like the OP did.) Googled and searched the forums yesterday to no avail; nothing I tried worked.
Caveat: In my case(s), I use 'startxfce4' instead of 'startx', so it might not be the exact issue. Trying 'startx' just took me to a default X installation setup, with three terminal windows and a clock. I'm sure anyone who's set up Arch for the first time has seen the same windows.
So in case it helps, here's what I did to get them working again:
1. This morning, I checked the forums again and saw the thread at https://bbs.archlinux.org/viewtopic.php?id=195107, which recommended changing a line in the file /etc/X11/xinit/xserverrc from:
exec /usr/bin/X -nolisten tcp "$@"
to
exec /usr/bin/X -nolisten tcp "$@" vt$XDG_VTNR
2. I didn't want to change the default file, so I created a ~/.xserverrc file (note that it's in my home directory, so it will only work for my one user; if you want it to work for multiple users you'd follow step one exactly, as recommended in the other thread). I put the line
exec /usr/bin/X -nolisten tcp "$@" vt$XDG_VTNR
in that file, saved it, and fired up 'startxfce4'. Everything works perfectly.
Again, since I use XFCE I don't know if it's exactly the same issue you have, but at least this might help point you towards a solution.
PS
In case you're wondering why I tried the solution in the other thread: The blank screen error only appears when I had
needs_root_rights=yes
in /etc/X11/Xwrapper.config. When I changed it to 'no' (or removed the file entirely), I would get an error message like "xf860OpenConsole: Cannot open /dev/tty0", which is similar to the error message the OP on that thread would get.
EDIT:
Actually, the more I think about it, the less I think this is the same problem. And the lack of details from the OP doesn't help. Still, it does appear that both of these problems concern passing a virtual terminal parameter to X, or failing to do so.
Last edited by Massimiliano (2015-03-23 13:21:58)

I have updated my Macbook Pro from 10.7.5 to 10.9.1 and it keeps on restarting after upgrade. Please help me fix this issue.

Hi All,
I have updated the Macbook Pro from 10.7.5 to 10.9.1 today and once it is done I restarted the system and it keeps on crashing/restarting the system every 2 min.
I have found the below backtrace. Please help me fix this issue.
Anonymous UUID:
C72C8841-51A0-BB21-689C-2AB204820087
Mon Dec 30 23:57:23 2013
panic(cpu 0 caller 0xffffff801da5260f): "a freed zone element has been modified: expected 0xdeadbeefdeadbeef but found 0, bits changed 0xdeadbeefdeadbeef, at offset 8 of 128 in zone: kalloc.128"@/SourceCache/xnu/xnu-2422.1.72/osfmk/kern/zalloc.c:461
Backtrace (CPU 0), Frame : Return Address
0xffffff8096bf3690 : 0xffffff801da22f69
0xffffff8096bf3710 : 0xffffff801da5260f
0xffffff8096bf3770 : 0xffffff801da51d09
0xffffff8096bf3870 : 0xffffff801da2aa2f
0xffffff8096bf38a0 : 0xffffff801dde080d
0xffffff8096bf38e0 : 0xffffff7f9fcada11
0xffffff8096bf3930 : 0xffffff7f9fcae16e
0xffffff8096bf39a0 : 0xffffff7f9fcae523
0xffffff8096bf39d0 : 0xffffff801dc13438
0xffffff8096bf3a00 : 0xffffff801dd83378
0xffffff8096bf3a70 : 0xffffff801dbfd1ae
0xffffff8096bf3ae0 : 0xffffff801dbf437a
0xffffff8096bf3b80 : 0xffffff801dbe5f15
0xffffff8096bf3c30 : 0xffffff801dbe67d2
0xffffff8096bf3f50 : 0xffffff801de3de23
0xffffff8096bf3fb0 : 0xffffff801daf3e06
Kernel Extensions in backtrace:
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib(1.0d1)[E163B7AE-F6E5-328 6-B827-66DB3FE3DB7B]@0xffffff7f9fcac000->0xffffff7f9fcaffff
BSD process name corresponding to current thread: applet
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:
0x000000001d800000
Kernel text base: 0xffffff801da00000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 172506613860
last loaded kext at 107245362778: com.trendmicro.kext.KERedirect 1.0.0 (addr 0xffffff7f9ff33000, size 24576)
loaded kexts:
com.trendmicro.kext.KERedirect 1.0.0
com.logmein.driver.LogMeInSoundDriver 1.0.0
org.virtualbox.kext.VBoxUSB 3.2.6
org.virtualbox.kext.VBoxDrv 3.2.6
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDAHardwareConfigDriver 2.5.3fc1
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.14.11
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.filesystems.autofs 3.0
com.apple.GeForceTesla 8.1.8
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMikeyDriver 2.5.3fc1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMuxControl 3.4.12
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.nvidia.NVDAStartup 8.1.8
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.iokit.IOBluetoothUSBDFU 4.2.0f6
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.3.5
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.6.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.AppleUSBEHCI 650.4.1
com.apple.driver.AppleUSBOHCI 650.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 216.0.0
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 216.0.0
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.kext.triggers 1.0
com.apple.nvidia.classic.NVDANV50HalTesla 8.1.8
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOSurface 91
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleGraphicsControl 3.4.12
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.nvidia.classic.NVDAResmanTesla 8.1.8
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.AppleSMC 3.1.6d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleUSBMultitouch 240.6
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.0
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IO80211Family 600.34
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Unable to gather system configuration information.Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 0 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK2555GSXF, 250.06 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N
USB Device: Built-in iSight
USB Device: Internal Memory Card Reader
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus:
Please help me fix this issue.
Thank you,
Nishanth

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Screen Resolution Changes after Sleep

After my 15 minute threshold my MacBook Pro puts the external display to sleep. Neither use of the keyboard or mouse reactivates the screen. I have to raise the lid on the closed MacBook Pro before the external display comes back. When it resumes its display, it isn't in the proper resolution. Using the Display Panel to reset the resolution reveals a scale that doesn't show the full capability of the external monitor. It doesn't show the monitor's maximum resolution of 2560 x 1600.
I'm using a 2011 March MacBook Pro with Windows 7 Ultimate 64-bit install. The Boot Camp drivers are at 4.0. I've got AMD's 8.812.0.0 driver installed on the AMD Radeo HD 6750M. The external monitor is a HP zr30W with driver version 1.0.0.0 with 14/12/2009 date.
Any ideas on how to resolve this?
Thanks.

Try this
Click the Apple
System Preferences
Security
General
There should be a tab that says "Log out after ___ minutes of activity.
Make sure that is set to whatever you want it to be or disabled. I disabled mine.
after that your macbook shouldnt log you out automatically and you won't have that problem anymore.
i had the same problem and did that and now its all good.
hope this helps.

Yoga 13 touch screen stopped working after update KB3000850, please help!

Hi, my Yoga 13 touch screen has been working fine until yesterday. The laptop came with Windows 8, and last year I upgraded to Windows 8.1 without issue. Yesterday, I installed optional update KB3000850 from Windows Update, and immediately the touch screen stopped working. I have tried the following methods, all without success:
* Uninstall KB3000850 from Windows Update
* Use Windows Restore to restore to the point before yesterday
* Re-install Intel Chipset Driver from Lenovo official driver page
* In Device Manager, uncheck all the "allow system to turn off to save power" options for the USB input devices under Human Interface Devices then restart
* Two-button shutdown and restart
* Install Lenovo Driver Manager and let it check for new drivers
* Download Cando multi touch panel driver (Note: I could not install the driver because all I got was a .cab file which does not allow me to install)
As of now my touch screen is still not working. Computer Information page from Settings shows that there is no touch or pen device for my screen.
Can anybody help me with this? Thanks!

Very true, this has been a known problem since the first day Lenovo released the Yoga 13.
I need to send Lenovo a bill for my time spent rebooting. So far i am on my 8th reboot. In the past, around 5 reboots after winddows update would work. This time... who knows.
Of course it always happens when you have a deadline.
Please post back if you have found a better soultion than system restore.
Thanks for posting this issue. More users need to bring this to Lenovo's attention.

I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!

I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!

You did turned in Settings > General > Usage > Battery Percentage: ON?
Try a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Screen resolution changed only in the browser after update of version 9.0.1 how do I change it back

Screen resolution changed only in the browser after update of version 9.0.1 how do I change it back?

http://kb.mozillazine.org/Screen_resolution_changes_when_launching_application ?

Screen resolution changes on iphone 4s after downloading OS 6.

Screen resolution changes on iphone 4s after downloading OS 6. Can't see entire home screen. I must reboot to restore original resolution, but while zoomed I can't see the ok button. What is the fix?

No one here knows when the next iOS update will be released or what changes it will include until Apple releases it.
iOS 6.1.2 does not disable Wi-Fi, the vast majority of issues with iPhones that appear after an iOS update can be resolved with basic troubleshooting which is reset, restart, restore (first from backup then as new).
If that does not resolve, then the issue is hardware related and no amount of iOS updates or restores will ever get it functional again.

Spontaneous screen resolution change

I am running OS X Maverick since a few days.
If I don't use my system, the screen "goes to sleep" after 10 min. (like I always had).
Since the OS X upgrade I have the problem that my screen resolution changes to 800 * 600 after when I "rewake" the screen (by pressing a key).
When I look in the system preferences, the screen resolution is set to "best for my screen"
I have to change it manually to the original setting (1280 * 960)
Error in the screendriver????

Hello viharij,
Where do you download the Windows enterprise?
Please download from the following link.
http://www.microsoft.com/en-us/evalcenter/evaluate-windows-8-1-enterprise
About how to change the screen resolution, please refer to the following article.
http://windows.microsoft.com/en-HK/windows-8/get-best-display-monitor
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

T420 Screen Resolution Change Issue

My T420 laptop is capable of 1600 X 900 screen resolution. After changing the resolution temporarily to 1024 X 768,
I tried to change it back a couple of hours later to 1600 X 900. However, now I do not even see 1600 X 900 as an option.
The highest option is its' current setting of 1024 X 768. Can someone tell me how I can get the 1600 X 900 resolution to show up
again as an option so I can change the screen resolution back to its' factory setting? I do not know what could have happened
except for maybe a windows update took place before I attempted to change the screen resolution back. Any help
would be greatly appreciated.

hey Quinn,
welcome to the forums. could you check the graphic card version on your unit and compare it to the version available on http://support.lenovo.com .
is it the same or is the one on the support site ? If both of it is the same, uninstall the graphic driver from your unit and then download the driver from our support site.
do not install it yet, set your unit to diagnostic mode via msconfig first and then only install.
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Facebook screen resolution changes automatically everytime on Mozilla Firefox 4. Other websites opens fine.

I have recently updated to Firefox 4. I am having many problems with this version.
I am unable to use Facebook properly. The Facebook screen resolution changes every time automatically. The screen resolution gets very big.
When I open the FB site the resolution will be fine as soon I open another tab to check other website and roll back to the FB tab the screen resolution gets big and can't get back to normal view.
I have to close the FB tab and open a new tab to put the FB URL to use it. When I try to view other tabs and then open the FB tab the screen resolution is changed.
I have problem with only FB on Firefox 4, other websites are working fine.
I also tried opening FB on IE8 and Chrome. Their the site is opening normal. Have no issues with their browsers. I spotted it to be a problem with Firefox 4 and also the IDM (Internet Download Manager) doesn't work on the FF4 where it used to work on the earlier version of FF.
Do something about the IDM integration with FF4 to download FLV,MP4 videos from YouTube and other websites.
There is no "Go back to multiple pages" button in a FF4 tab. It only allows us to go back to the previous page. If I have open 10 pages in a single tab then I have to click the back button 10 TIMES to open the last (10th page) but in the previous FF3 there is a facility to view all the pages in a drop down which the current version of FF4 doesn't have :-( I am using Windows XP 2 Professional 32-bit and owner of the computer.
Please fix the issues asap else I have to move back to the earlier version or have to shift to some other browser :
Here goes the screenshots :
http://i55.tinypic.com/2s8s8c6.jpg
http://i51.tinypic.com/j7vynq.jpg
http://i55.tinypic.com/1yuwbq.jpg

Reset the page zoom on pages that cause problems: View > Zoom > Reset (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

How to solve screen resolution in bdc

hi experts,
please tell me how to solve screen resolution in bdc.
regards.
subhasis

Hi,
Pls check other posts in SDN before posting ur thread..there is same thread related to this on this forum on same day.
Screen resolution means different in the screen display depending on ur system screen resolution.
suppose ur system resolution is diff and another's system is different then like in Tcode VA01, there will be 3 lineitems and another there will be 5 lineitems ,
so while doing recording and page down that will bw diff so there will be some problem
So u have to set the screen resolution as default by using CTU parameters..
write this code then
f_option-updmode = 'S'.
f_option-defsize = 'X'.* f
_option-dismode = 'N'.
*call transaction 'VA01' using bdcdata options from f_option messages into bdcerror.
Hope it helps.
Regards,
Sonika

[SOLVED]X start failure after upgrade: dri3,present modules missing

I start X with ~.xinitrc from console, which won"t work after last upgrade --first in two weeks.
(EE) Server terminated with error (1).Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
Xorg.log.0 :
[51:778] (EE) intel: Failed to load module "dri3" (module does not exist, 0)
[51:779] (EE) intel: Failed to load module "present" (module does not exist, 0)
Installed packages (EDIT: completed):
xf86-video-intel-2.99.{914-4,916-1}-i686 and also tried with xf86-video-intel-git, with "SNA" acceleration.
intel-dri 10-2.7-3
dri2proto 2.8-2
dri3proto 1.0-1
xf86driproto 2.1.1-3
Linux 3.15.5-2-ARCH i686
Linux CK Atom 3.16.2-1
Issue occurred after upgrading from v2.99.912-1 to v2.99.914+. I was going to try downgrade xf86-video-intel to v2.99.912-1 (as in the first thread in Refs) but went in a dependency conflict, with the older intel driver requiring glamor-egl which conflicts with xorg-server ':-|
Atom netbook
lspci:
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
Some refs :
» [SOLVED] X start failure after upgrade https://bbs.archlinux.org/viewtopic.php?pid=1426837
» [Solved] xf86-video-Intel-2.99.912-1 breaks xorg https://bbs.archlinux.org/viewtopic.php?id=182932
Last edited by kozaki (2014-09-12 09:45:53)

The issue occurred after upgrading from xf86-video-intel-v2.99.912-1 to v2.99.914+ and xorg-server-1.15.2-1 to 1.16.0-6 (and -devel).
same issue if:
- Switching accelaration method to "UXA" as per https://bugs.archlinux.org/task/40860
- Adding Option "DRI" "False"
Digged a bit:
- same modules errors but appears to be a Gnome bug (X starts): https://bbs.archlinux.org/viewtopic.php?pid=1441716
- same modules errors but X starts up without problems http://www.linuxquestions.org/questions … 175511372/
makes me doubt if this issue is related to the modules not found. Which is the single indication I found so far x-/
Any light on where can the issue comes from? hardware is pretty much standard even if getting a bit old. Never had Xorg related issue so far on this pancake.
Last edited by kozaki (2014-09-11 11:05:42)

[solve] Screen resolution changed after upgrading xorg please help?

Similar Messages

Maybe you are looking for