[SOLVED] Clarify - directory ownership differs during sysmd upgrade

Hello,
I get the warning (see below) - and I am wondering if I understand it correctly that I do not need to do anything about this warning?
warning: directory ownership differs on /var/log/journal/remote/
filesystem: 0:998 package: 0:0
It is the same warning discussed in this thread: https://bbs.archlinux.org/viewtopic.php?id=193782, and since it is solved,
and the bug report here: https://bugs.archlinux.org/task/43852 also does not give me a conclusive answer, I opened this one.
Regards
Martin
Last edited by onslow77 (2015-02-21 12:12:20)

Hello,
I tried to solve this by doing:
1. Checking the systemd package
pacman -Qkk systemd
warning: systemd: /var/log/journal/remote (GID mismatch)
2. Change the "/var/log/journal/remote" to the root group and user
# chown root:root /var/log/journal/remote/
3. Checking the systemd package again
pacman -Qkk systemd
systemd: 1003 total files, 0 altered files
4. Seems correct, so I rebuild my initramfs and reboot (hoping this will keep the above chown edit)
# mkinitcpio -p linux
# reboot
Checking the systemd package again
pacman -Qkk systemd
warning: systemd: /var/log/journal/remote (GID mismatch)
So after my reboot I am back where I started - and I do not get it, what am I suppose to to with this warning, point me in the right direction please.
Regards
Martin

Similar Messages

  • [SOLVED] Systemd 2.18 - directory ownership

    Have this issue with new systemd. When I install it gives me two lines of a warning, is this safe to ignore?
    warning: directory ownership differs on /var/log/journal/remote/
    filesystem: 0:999 package: 0:0
    If not how would I go about figuring out what this means and how to remedy it?
    Also I've upgraded my Arch system but when I boot it still says loading systemd 2.17, not 2.18, wierd, any thoughts?
    Last edited by ad2phnx (2015-01-03 16:08:22)

    ad2phnx wrote:Also I've upgraded my Arch system but when I boot it still says loading systemd 2.17, not 2.18, wierd, any thoughts?
    There are already a few threads about this e.g. https://bbs.archlinux.org/viewtopic.php?id=191243
    Rebuild your initramfs.
    Last edited by karol (2015-01-02 05:57:00)

  • Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved.  It started with the last upgrade to 10.8

    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    resetpassword
    That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Error during the upgrade phase "start_shdi_first"

    Hello,
    We are having issue with upgrading r/3 4.7 enterprise extension set to ECC 6.0
    Here the error message goes....
    starting system failed rc=0
    to analyse the error during start of shadow instance
    view files 'Startsfi.log' and 'devtrace.log'
    in directory usr\..put
    repeat phase until shadow instance is started
    and u can logon instance no '01'"
    We have changed the DDIC password during upgrade.after that we ran the initphase to update the password.
    I think sapup is referring the old password which was entered initially during the upgrade and we dont remember the old password also.
    Appreciate your response
    Startsfi.log
    1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080218175653")
    2 ETQ366 Connect variables are set for shadow instance access
    4 ETQ399 System-nr = '01', GwService = 'sapgw01'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_mss_schema=de4
    4 ETQ399   auth_shadow_upgrade=1
    4 ETQ399 Set environment for shadow connect:
    4 ETQ399 ENV: dbs_mss_schema=de4
    4 ETQ399 ENV: auth_shadow_upgrade=1
    4 ETQ399 Set RFC variables for shadow connect:
    4 ETQ399 System-nr = '01', GwService = 'sapgw01'
    4 ETQ399 Set tool parameters for shadow connect:
    4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
    4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    4 ETQ399   default TPPARAM: SHADOW.TPP
    4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
    4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    2 ETQ399 Starting shadow instance
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2 ETQ353 Starting system
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2EETQ399 Starting shadow instance failed
    2EETQ399 Test RFC failed finally
    2EETQ399 Dialogue: ERROR
    2EETQ399 Starting system failed, rc=0
    DEVTRACE:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        DE4
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    111
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        2272
    Mon Feb 18 16:08:40 2008
    kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
    length of sys_adm_ext is 364 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 2272) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 111 successfully loaded
         shared lib "dw_xtc.dll" version 111 successfully loaded
         shared lib "dw_stl.dll" version 111 successfully loaded
         shared lib "dw_gui.dll" version 111 successfully loaded
         shared lib "dw_mdm.dll" version 111 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    Mon Feb 18 16:08:52 2008
    WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0065.qqq.nxst) took 12 seconds
    Mon Feb 18 16:09:10 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5361]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >MTW02SDEC01_DE4_01                      <
    DpShMCreate: sizeof(wp_adm)          19976     (908)
    DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1296)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 065C0040, size: 4241064)
    DpShMCreate: allocated sys_adm at 065C0040
    DpShMCreate: allocated wp_adm at 065C1B30
    DpShMCreate: allocated tm_adm_list at 065C6938
    DpShMCreate: allocated tm_adm at 065C6968
    DpShMCreate: allocated wp_ca_adm at 06936BF8
    DpShMCreate: allocated appc_ca_adm at 0693B248
    DpShMCreate: allocated comm_adm at 0693C9B8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 069BD868
    DpShMCreate: allocated gw_adm at 069BD8A8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 069BD8D8
    DpShMCreate: allocated wall_adm at 069BD8E0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 2046 blocks reserved for free list.
    ES initialized.
    WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12437]
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( MTW02SDEC01) [dpxxdisp.c   11753]
    DpStartStopMsg: send start message (myname is >MTW02SDEC01_DE4_01                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 111
    Release check o.K.
    Mon Feb 18 16:09:13 2008
    MBUF state ACTIVE
    DpModState: change server state from STARTING to ACTIVE
    trc file: "dev_ms", trc level: 1, release: "700"
    [Thr 4724] Mon Feb 18 16:08:40 2008
    [Thr 4724] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    110
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        5420
    [Thr 4724] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5420) [msxxserv.c   1824]
    [Thr 4724] MsInitAclInfo: acl file D:\usr\sap\put\DE4\SYS\global\ms_acl_info.DAT not found, unrestricted access
    [Thr 4724] MsGetOwnIpAddr: my host addresses are :
    [Thr 4724]   1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
    [Thr 4724]   2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
    [Thr 4724] MsHttpInit: full qualified hostname = MTW02SDEC01.mindsap.com
    [Thr 4724] HTTP logging is switch off
    [Thr 4724] MsHttpOwnDomain: own domain[1] = mindsap.com
    [Thr 4724] ms/icf_info_server : deleted
    [Thr 4724] *** I listen to port sapmsSHDDE4 (3601) ***
    [Thr 4724] CUSTOMER KEY: >J1537289841<
    trc file: "dev_rd", trc level: 1, release: "700"
    Mon Feb 18 16:09:10 2008
    ***LOG S00=> GwInitReader, gateway started ( 2344) [gwxxrd.c     1694]
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    110
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        2344
    gateway runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
    gw/local_addr : 0.0.0.0
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    Bind service sapgw01 (socket) to port 3301
    GwPrintMyHostAddr: my host addresses are :
      1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
      2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
    DpSysAdmExtCreate: ABAP is active
    DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    DpShMCreate: sizeof(wp_adm)          19976     (908)
    DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1296)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06110040, size: 4241064)
    DpShMCreate: allocated sys_adm at 06110040
    DpShMCreate: allocated wp_adm at 06111B30
    DpShMCreate: allocated tm_adm_list at 06116938
    DpShMCreate: allocated tm_adm at 06116968
    DpShMCreate: allocated appc_ca_adm at 0648B248
    DpShMCreate: allocated comm_adm at 0648C9B8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0650D868
    DpShMCreate: allocated gw_adm at 0650D8A8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0650D8D8
    MtxInit: -2 0 0
    Mon Feb 18 16:09:14 2008
    GwDpInit: attached to gw_adm at 0650D8A8
    Thanks,
    Vadi

    Dear All,
    The issue has been resolved by changing the DDIC password to what it was when we have started the upgrade.The password was "welcome" when we have started with upgrade after that it has been changed to
    "basis05" during upgrade.we changed it back to welcome and it started working fine.
    Here it took long time to find out what was the password when we have starte upgrade.Resetting to standard ddic password also ddint help out in our case.
    Thanks for all your replies.

  • SCM5 - SCM7 Upgrade Error during LiveCache upgrade Step C4

    We are in the process of upgrading our SCM5 system to SCM7 release level. During livecache upgrade step C4 to load transaction data, we are getting error CONNE_IMPORT_WRONG_COMP_TYPE. The dump says that "when importing the object 'OT_ORDERS", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "/SAPAPO/SAPLOM_UPGR_PARALLEL". The data type is "P" in the dataset, but "C in the program".
    Our source livecache version is 7.6.03.12 and target livecache version we are upgrading to is 7.7.04.29. We used BS 7 SR1 liveCache 7.7.04 DVD from service marketplace. We did not use the update DVD since the guide mentioned that customers on SCM5.1 or higher need to run livecache upgrade from update DVD.
    All steps in A, B have already been completed.
    More details from the ST22 dump -
    Error analysis | | An exception occurred that is explained in detail below. | | The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was | | not caught in | | procedure "GET_DB" "(METHOD)", nor was it propagated by a RAISING clause. | | Since the caller of the procedure could not have anticipated that the | | exception would occur, the current program is terminated. | | The reason for the exception is: | | When importing the object "OT_ORDERS", the component no. 5 in the | | dataset has a different type from the corresponding component | | of the target object in the program "/SAPAPO/SAPLOM_UPGR_PARALLEL". | | | | The data type is "P" in the dataset, but "C" in the program. Information on where terminated | | Termination occurred in the ABAP program "/SAPAPO/SAPLOM_UPGR_PARALLEL" - in | | "GET_DB". | | The main program was "SAPMSSY1 ". | | | | In the source code you have the termination point in line 3222 | | of the (Include) program "/SAPAPO/OM_UPG_CLASS_IMPCLUT". | | The termination is caused because exception "CX_SY_IMPORT_MISMATCH_ERROR" | | occurred in | | procedure "GET_DB" "(METHOD)", but it was neither handled locally nor declared | | in the RAISING clause of its signature. | | | | The procedure is in program "/SAPAPO/SAPLOM_UPGR_PARALLEL "; its source code | | begins in line | | 3221 of the (Include program "/SAPAPO/OM_UPG_CLASS_IMPCLUT ".
    We are running AIX5.3 and Oracle 10.2.0.2.0.
    Any help here will be greatly appreciated.

    This is exactly the same with OSS 305147 2010. It will be answered in BC-DB-LCA area.

  • SOLUTION to iPhoto 6 crashing without warning during library upgrade

    THE PROBLEM
    The problem which I and some others in this forum were facing was that iPhoto 6 would CRASH WITHOUT WARNING halfway through the process of updating our previous iPhoto 5 library. This is a different problem from the permissions issues which some other users have faced, which iPhoto 6 does warn you about.
    THE EXPLANATION
    After trial and error, I concluded that there was a corrupted photo in my library that iPhoto was choking on during the upgrading process. Unfortunately, there was no easy way to identify which of my 3000+ photos this was. Hence, the solution was to laboriously test my library year-by-year, to isolate the year in which the problematic photo was hiding. This meant creating individual copies of my iPhoto library, one for each year, and then test-upgrading each individual copy. Each individual year upgraded fine, except for 2004. Thus, I could deduce that the problematic photo was in 2004. I then created a new copy of my iPhoto 5 library, containing all photos except for those in 2004. It upgraded fine. I then manually dragged my photos from 2004 back into iPhoto. Thus, all my comments/ratings/keywords for other years were intact, and I only had to re-do 2004.
    THE STEPS
    In order to use this solution, you must have a backup of your iPhoto 5 library. It also helps if you can install a fresh copy of Mac OS X 10.4 and iPhoto 6 (SIX) on another partition. The steps are:
    1. Reinstall/'downgrade' to iPhoto 5 (this requires deleting the iPhoto 6 application and also all iPhoto receipts in the /Library/Receipts folder, before reinstalling from iLife '05)
    2. Create multiple copies of your iPhoto 5 library backup (the entire iPhoto Library folder from your iPhoto 5), and title the backup copies 'Early Photos', '2003', '2004', '2005' and '2006'.
    3. By holding down Option while launching iPhoto 5, open each copy of your library, and delete photos from each copy so that only one year of photos remains in each copy, i.e. you should have one library containing only 'Early Photos' (pre-2003), one containing only 2003 photos, etc.
    4. Test-upgraded each individual 'annual' library on another installation of iPhoto 6. Those that can be upgraded are fine. The one that crashes obviously contains the corrupted photo.
    5. Go back and create a fresh copy of your iPhoto 5 library, and open it in iPhoto 5. Delete only the photos from the problematic year, leaving all the rest behind. Before deleting the photos, drag them into a folder on the desktop, so that you can re-import them later.
    6. Now re-install iPhoto 6 (the end is near, trust me) and open the fresh copy of your iPhoto 5 library. Upgrade it. You will now have a upgraded library, minus all the photos from the excluded year.
    7. You should now be able to re-import photos from the excluded year, by dragging them into iPhoto 6. However, this may mean reintroducing the corrupted photo into your library. I really can't help you beyond this - re-import at your own risk, and always keep backups.
    8. Enjoy (after much frustration).
    ALTERNATIVES
    It isn't necessary to test your library year-by-year. For example, if you only have photos from one year, then you'd have to find some other way to break your library into logical chunks, and test each chunk using the procedure above. Again, the chunk that crashes during upgrading contains the corrupted photo. It's really up to you how finely you want to sub-divide and test your iPhoto 5 library, to isolate the corrupted photo.
    (P.S. Really, this should be addressed by Apple. It is murder and really tedious to do this, and I suspect it would be difficult for anyone not familiar with Mac OS X, and also difficult if you don't have multiple partitions/drives to install separate copies of iPhoto 5 and iPhoto 6.

    Thanks for your help. It should work with some iPhoto libraries, but unfortunately not with mine.
    iPhoto was crashing, so I found the guilty album, deleted it, retried: but it crashes on another album, etc. I think I have more than one corrupted picture/album, so the only solution to make iPhoto complete the update was to remove 90% of my pictures... not a real solution

  • Work process dies during an Upgrade in Shadow Instance

    Hi all,
    Systemconfiguration: Windows 2003 Server SP2  - Oracle 10.2.0.2
    during the Upgrade PHASE SET "SETSYNC_EULCK_START_D1 after STARTSAP_IMP nothing more happends on the system. No errors in den SAPup.log etc.
    The reason:
    I can`t start the shadow Instance. During the start process in mmc the dispatcher + work process died...
    Has anyone an Idea....there are som
    Here is the dev_w0 logfile:
    It might be great if anyone can help me!!!
    The errors in a row:
    1 - C     SQL error 942: 'ORA-00942: table or view does not exist'
    B  ***LOG BZA=> table SVERS      does not exist on database            [dblink#5 @ 1299] [dblink  1299 ]
    2 -
    C  *** ERROR => ORA-1403 when accessing table SAPUSER
    [dbsloci.c    11535]
    C  OCI-call failed with -1=OCI_ERROR
    C     SQL error 942: 'ORA-00942: table or view does not exist'
    3 -
    B  ***LOG BZA=> table SVERS      does not exist on database            [dblink#5 @ 1299] [dblink  1299 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1440]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10504
    trc file: "dev_w0", trc level: 1, release: "700"
    ACTIVE TRACE LEVEL           1
    ACTIVE TRACE COMPONENTS      all, MJ
    B 
    B Sat Jun 07 12:29:47 2008
    B  create_con (con_name=R/3)
    B  Loading DB library 'E:\usr\sap\put\exe\dboraslib.dll' ...
    B  Library 'E:\usr\sap\put\exe\dboraslib.dll' loaded
    B  Version of 'E:\usr\sap\put\exe\dboraslib.dll' is "700.08", patchlevel (0.152)
    B  New connection 0 created
    M sysno      50
    M sid        CDP
    M systemid   562 (PC with Windows NT)
    M relno      7000
    M patchlevel 0
    M patchno    155
    M intno      20050900
    M make:      multithreaded, Unicode, 64 bit, optimized
    M pid        3656
    M
    M  kernel runs with dp version 235000(ext=110000) (@(#) DPLIB-INT-VERSION-235000-UC)
    M  length of sys_adm_ext is 576 bytes
    M  ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3656) [dpxxdisp.c   1312]
    I 
    I Sat Jun 07 12:29:49 2008
    I  MtxInit: 30000 0 0
    M  DpSysAdmExtCreate: ABAP is active
    M  DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    M  DpShMCreate: sizeof(wp_adm)          12928     (1616)
    M  DpShMCreate: sizeof(tm_adm)          5652128     (28120)
    M  DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
    M  DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
    M  DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
    M  DpShMCreate: sizeof(comm_adm)          552080     (1088)
    M  DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    M  DpShMCreate: sizeof(slock_adm)          0     (104)
    M  DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    M  DpShMCreate: sizeof(file_adm)          0     (72)
    M  DpShMCreate: sizeof(vmc_adm)          0     (1864)
    M  DpShMCreate: sizeof(wall_adm)          (41664/36752/64/192)
    M  DpShMCreate: sizeof(gw_adm)     48
    M  DpShMCreate: SHM_DP_ADM_KEY          (addr: 0000000010A80050, size: 6336352)
    M  DpShMCreate: allocated sys_adm at 0000000010A80050
    M  DpShMCreate: allocated wp_adm at 0000000010A82150
    M  DpShMCreate: allocated tm_adm_list at 0000000010A853D0
    M  DpShMCreate: allocated tm_adm at 0000000010A85430
    M  DpShMCreate: allocated wp_ca_adm at 0000000010FE92D0
    M  DpShMCreate: allocated appc_ca_adm at 0000000010FEF090
    M  DpShMCreate: allocated comm_adm at 0000000010FF0FD0
    M  DpShMCreate: system runs without slock table
    M  DpShMCreate: system runs without file table
    M  DpShMCreate: allocated vmc_adm_list at 0000000011077C60
    M  DpShMCreate: allocated gw_adm at 0000000011077CE0
    M  DpShMCreate: system runs without vmc_adm
    M  DpShMCreate: allocated ca_info at 0000000011077D10
    M  DpShMCreate: allocated wall_adm at 0000000011077D20
    M  rdisp/queue_size_check_value :  -> off
    M  ThTaskStatus: rdisp/reset_online_during_debug 0
    X  EmInit: MmSetImplementation( 2 ).
    X  MM global diagnostic options set: 0
    X  <ES> client 0 initializing ....
    X  Using implementation view
    X  <EsNT> Using memory model view.
    M  <EsNT> Memory Reset disabled as NT default
    X  ES initialized.
    M 
    M Sat Jun 07 12:29:50 2008
    M  ThInit: running on host drfeelgood
    M 
    M Sat Jun 07 12:29:51 2008
    M  calling db_connect ...
    C  CLIENT_ORACLE_HOME is not set as environment variable or
    C  DIR_CLIENT_ORAHOME is not set as profile parameter.
    C    assuming using instant client with unspecified location.
    C 
    C Sat Jun 07 12:29:53 2008
    C  Oracle Client Version: '10.2.0.1.0'
    C 
    C Sat Jun 07 12:29:55 2008
    C  Client NLS settings: AMERICAN_AMERICA.UTF8
    C  Logon as OPS$-user to get SAPSR3SHD's password
    C  Connecting as /@CDP on connection 0 (nls_hdl 0) ... (dbsl 700 130308)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1 00000000138A2020 000000000A91EC10 00000000138C59C8
    C  Attaching to DB Server CDP (con_hdl=0,svchp=00000000138C5888,srvhp=00000000138C7CB8)
    C 
    C Sat Jun 07 12:30:20 2008
    C  Starting user session (con_hdl=0,svchp=00000000138C5888,srvhp=00000000138C7CB8,usrhp=000000000A91F428)
    C 
    C Sat Jun 07 12:30:26 2008
    C  Now '/@CDP' is connected: con_hdl=0, nls_hdl=0, session_id=55.
    C  *** ERROR => ORA-1403 when accessing table SAPUSER
    [dbsloci.c    11535]
    C  Disconnecting from connection 0 ...
    C  Closing user session (con_hdl=0,svchp=00000000138C5888,usrhp=000000000A91F428)
    C  Now I'm disconnected from ORACLE
    C  Try to connect with default password
    C  Connecting as SAPSR3SHD/<pwd>@CDP on connection 0 (nls_hdl 0) ... (dbsl 700 130308)
    C  Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
    C    0 UTF8                                                      1 00000000138A2020 000000000A91EC10 00000000138C59C8
    C  Starting user session (con_hdl=0,svchp=00000000138C5888,srvhp=00000000138C7CB8,usrhp=000000000A91F428)
    C 
    C Sat Jun 07 12:30:27 2008
    C  Now 'SAPSR3SHD/<pwd>@CDP' is connected: con_hdl=0, nls_hdl=0, session_id=52.
    C  Database NLS settings: AMERICAN_AMERICA.UTF8
    C  DB instance CDP is running on DRFEELGOOD with ORACLE version 10.2.0.2.0 since JUN 07, 2008, 00:35:17
    B  Connection 0 opened (DBSL handle 0)
    B  Wp  Hdl ConName          ConId     ConState     TX  PRM RCT TIM MAX OPT Date     Time   DBHost         
    B  000 000 R/3              000000000 ACTIVE       NO  YES NO  000 255 255 20080607 122951 DRFEELGOOD     
    C  build_stmt: reallocating stmt buffer: 256 -> 2000 characters
    C 
    C Sat Jun 07 12:30:30 2008
    C  OCI-call failed with -1=OCI_ERROR
    C     SQL error 942: 'ORA-00942: table or view does not exist'
    B  ***LOG BZA=> table SVERS      does not exist on database            [dblink#5 @ 1299] [dblink  1299 ]
    M  ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c   1440]
    M  in_ThErrHandle: 1
    M  *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10504]
    M 
    M  Info for wp 0
    M 
    M    pid = 3656
    M    severity = 0
    M    status = 0
    M    stat = WP_RUN
    M    waiting_for = NO_WAITING
    M    reqtype = DP_RQ_DIAWP
    M    act_reqtype = NO_REQTYPE
    M    rq_info = 0
    M    tid = -1
    M    mode = 255
    M    len = -1
    M    rq_id = 65535
    M    rq_source =
    M    last_tid = 0
    M    last_mode = 0
    M    semaphore = 0
    M    act_cs_count = 0
    M    csTrack = 0
    M    csTrackRwExcl = 0
    M    csTrackRwShrd = 0
    M    mode_cleaned_counter = 0
    M    control_flag = 0
    M    int_checked_resource(RFC) = 0
    M    ext_checked_resource(RFC) = 0
    M    int_checked_resource(HTTP) = 0
    M    ext_checked_resource(HTTP) = 0
    M    report = >                                        <
    M    action = 0
    M    tab_name = >                              <
    M    attachedVm = no VM
    M 
    M  *****************************************************************************
    M  *
    M  *  LOCATION    SAP-Server drfeelgood_CDP_50 on host drfeelgood (wp 0)
    M  *  ERROR       ThInit: db_connect
    M  *
    M  *  TIME        Sat Jun 07 12:30:30 2008
    M  *  RELEASE     700
    M  *  COMPONENT   Taskhandler
    M  *  VERSION     1
    M  *  RC          13
    M  *  MODULE      thxxhead.c
    M  *  LINE        10724
    M  *  COUNTER     1
    M  *
    M  *****************************************************************************
    M 
    M  PfStatDisconnect: disconnect statistics
    M  Entering TH_CALLHOOKS
    M  ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
    M  *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   724]
    M  *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c  261]
    M  Entering ThSetStatError
    M  ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
    M  Entering ThReadDetachMode
    M 
    M Sat Jun 07 12:30:31 2008
    M  call ThrShutDown (1)...
    M  ***LOG Q02=> wp_halt, WPStop (Workproc 0 3656) [dpnttool.c   333]

    Hi Markus,
    thks for your advise. I already updated the Oracle Client to version 10.2.0.2.
    The upgrade from CRM 5.0 to CRM 6.0 - 2007 is still running, but theres nothing happens in PHASE SETSYNC_EULCK_D1. This Phase comes after the EU_Imports 1-7.
    In the log directory there ist also nothing the indicates about errors.
    Here is the last SAPUp.log entries
    ************************* SAPup started in UPGRADE mode *************************
    This is SAPup version 7.00/2 patch level 24.103.
    This is UNICODE SAPup!
    Reading Parameter File "E:\usr\sap\put\bin\DBSYNC.PAR" at 20080607162600
    Condition level 1, total => TRUE '#if ( "ORA" == "ORA" )' => TRUE
    Reading Parameter File "E:\usr\sap\put\bin\R3CURENV.LST" at 20080607162600
    ...begin dialogue at 20080607162603
    ...end dialogue at 20080607162607
    ...STARTED at 20080607162607.
    Reading Parameter File "E:\usr\sap\put\bin\TRATTR.LST" at 20080607162607
    Reading Parameter File "E:\usr\sap\put\bin\TRGROUP.LST" at 20080607162607
    Reading Parameter File "E:\usr\sap\put\bin\R3CURENV.LST" at 20080607162607
    Reading Parameter File "E:\usr\sap\put\bin\DBSWTC.PAR" at 20080607162607
    Condition level 1, total => FALSE '#if "ORACLE" == "SAPDB"' => FALSE
    Condition level 1, total => FALSE '#elseif "ORACLE" == "DB2-z/OS"' => FALSE
    Condition level 1, total => FALSE '#elseif "ORACLE" == "DB2/400"' => FALSE
    Condition level 1, total => FALSE '#elseif "ORACLE" == "DB6"' => FALSE
    Condition level 1, total => FALSE '#elseif "ORACLE" == "INFORMIX"' => FALSE
    Condition level 1, total => FALSE '#elseif "ORACLE" == "MSSQL"' => FALSE
    Condition level 1, total => TRUE '#elseif "ORACLE" == "ORACLE"' => TRUE
    Condition level 1, total => FALSE '#if "Windows NT X86_64" ~= "Linux"' => FALSE
    Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT INTEL"' => FALSE
    Condition level 1, total => FALSE '#elseif "Windows NT X86_64" ~= "Windows NT IA64"' => FALSE
    Condition level 1, total => TRUE '#elseif "Windows NT X86_64" ~= "Windows NT X86_64"' => TRUE
    ...begin dialogue at 20080607162610
    ...end dialogue at 20080607162615
    ...begin dialogue at 20080607162615
    ...end dialogue at 20080607162637
    UPGRADEPHASE SETSYNC_EULCK_START_D1
    ...started at 20080607162637
    Setting syncpoint EU_LOCKED=STARTED in E:\usr\sap\put\mig\SYNC.DAT
    At the usr sap put tmp directory, that shows the current activitiy of the upgrade, there also nothing happens.
    if i have to start the shadow instance in the mmc manually at this time of the upgrade phase....at this time it doesnt work, but i dont find anything in the upgrade documentation.
    Cheers Mario

  • HT4859 My iPhone 4 siezed/froze during an upgrade and can not access any screen, etc on the phone.  How do I back up and restart?

    My iPhone 4 siezed/froze during an upgrade.  How can I back up and then reset?

    I'm fairly certain this is expected behavior if you have a CDMA carrier like Verizon or Sprint. The phone cannot handle being on a call and using data to receive messages or email.
    Someone else may be able to further clarify.
    ~Lyssa

  • File transfer during Leopard upgrade

    I'm considering upgrading from OS X 10.4.11 to Leopard on my iMac. Will all my files, pics, movie projects, and folders remain intact and in place during the upgrade? How does it work?

    Depends upon what install option you use. I would consider doing the following things:
    *1. Repair the hard drive and permissions*:
    Boot from your Tiger Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    *2. Clone your existing system to an external hard drive*:
    a. Open Disk Utility from the Utilities folder.
    b. Select the destination volume from the left side list.
    c. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
    d. Click on the Restore tab in the DU main window.
    e. Select the destination volume from the left side list and drag it to the Destination entry field.
    f. Select the source volume from the left side list and drag it to the Source entry field.
    g. Double-check you got it right, then click on the Restore button.
    Destination means the external drive to which you will clone.
    Source means the drive you are cloning - your startup volume.
    *3. Install Leopard using the Archive and Install option*:
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    A. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    B. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    C. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    D. You can now download any unpdates using Software Update.

  • Connection reset during firmware upgrade

    I have a Linksys WRT54GS (v5) router. I noticed that my firmware was outdated and tried to upgrade it tonight. During the upgrade progress, the browser reset the connection and now  cannot access my router configuration pages.
    I did a hard reset. Then I did the 30-30-30 reset.
    The reset worked but no matter what I do, I cannot navigate to any readable page within the router. I get the log in box and successfully log into the router. However, the configuration page(s) are all jumbled and devoid of useful information. It almost looks like a web page that needs flash to be enabled. Lots of colors and boxes but no text or links to other configuration pages
    I know it's an old router but it has served me well. I would love to reinstall the old firmware (or new!) and copy my saved configuration file back to the router.
    Is this a hopeless situation?
    Is there a way to access the configuration via a command line interface?
    Please, any help would be greatly appreciated.
    Solved!
    Go to Solution.

    Actually, thanks for your answer but I posted too soon. I just found a solution to my problem.
    Rather than try to rewrite the original persons instructions, I will copy and paste them below.
    I found this fix on the following site:
    http://en.kioskea.net/forum/affich-87540-can-t-view-linksys-router-web-page-wrt54g
    Scroll down to the Comments section and find the one by "elmo21". The find the reply by "Lynn". I hope this helps someone.
    It worked like a charm for me:
    Lynn - Dec 12, 2009 2:59pm GMT
    Hey guys,
    I was faced with similar problem, that the page 192.168.1.1 can't seems to load properly. After surfing the net in search for solution, i finally got the answer! Now i can access the page without problem.
    The problem is likely due to router firmware issue. This is what you can do.
    1) Go to http://www.linksysbycisco.com/APAC/en/support to search for your router model, and download the latest firmware
    2) Go to http://www.idealinternet.co.uk/restore-linksys-firmware.tpl and download the linksys-tftp.exe available on that page
    3) Run the linksys-tftp.exe program. Key in the details as below:
    Server : 192.168.1.1
    Password : admin
    File : <look for the firmware file that you had download earlier>
    4) Click Upgrade
    5) You should be able to see the progress bar that shows upgrading in process and eventually, it will show a message that firmware had been upgraded
    6) After that, try going to the page 192.168.1.1 . Leave the username blank and key password as admin
    7) The page should load nicely after the firmware had been upgraded successfully!!
    Hope the above works for you guys!!

  • Backup Service - Pool ownership conflict during import

    Hi, I am getting this error every time
    the backup service performs a backup. How do I remove the conflicting entries?
    Microsoft Lync Server 2013, Backup
    Service user store backup module detected items having pool ownership conflict during import.
    Items having pool ownership conflict: 
    ItemId: 823b033e-357e-43dc-97d1-75cb9670f640,
    DocId: 1117, DocName: urn:hcd:[email protected]
    ItemId: 823b033e-357e-43dc-97d1-75cb9670f640,
    DocId: 1118, DocName: urn:lcd:[email protected]
    ItemId: d2db9bae-4fa8-451c-b821-32e992319232,
    DocId: 1119, DocName: urn:hcd:[email protected]
    ItemId: d2db9bae-4fa8-451c-b821-32e992319232,
    DocId: 1120, DocName: urn:lcd:[email protected]

    Hi Fernando -
    How to take ownership from active directory? I searched everywhere but I didn't find any tab or command to do this. Can you please explain little bit more?
    Thanks,
    SD
    Please help....i recently deployed a second pool where i am currently facing this issue.
    My email address is : [email protected]
    PS C:\Users\xxxxx> Invoke-CsBackupServiceSync
    cmdlet Invoke-CsBackupServiceSync at command pipeline position 1
    Supply values for the following parameters:
    PoolFqdn: indyslync2013.technicolor.com
    Doing a full sync might add a heavy load to the backup service and temporarily
    increase the backup replication latency.
    Are you sure want to continue?
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [S] Suspend  [?] Help
    (default is "Y"):Y
    Invoke-CsBackupServiceSync : Failed to perform a Windows Communication Foundati
    on (WCF) call to backup service instance on computer "INDYSLYNCFE03.thmulti.com
    ". Verify that backup service is running. More details: "There was no endpoint
    listening at https://indyslyncfe03.thmulti.com/BackupService/ that could accept
     the message. This is often caused by an incorrect address or SOAP action. See
    InnerException, if present, for more details.".
    At line:1 char:1
    + Invoke-CsBackupServiceSync
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (:) [Invoke-CsBackupServiceSyn
       c], CommunicationException
        + FullyQualifiedErrorId : Failed to find a computer that has an active bac
       kup service in the specified pool. Exception: System.ServiceModel.Communic
      ationException: Failed to perform a Windows Communication Foundation (WCF)
      call to backup service instance on computer "INDYSLYNCFE03.thmulti.com".
    Verify that backup service is running. More details: "There was no endpoin    t
     listening at https://indyslyncfe03.thmulti.com/BackupService/ that could     a
    ccept the message. This is often caused by an incorrect address or SOAP     act
    ion. See InnerException, if present, for more details.". ---> System.Se    rvic
    eModel.EndpointNotFoundException: There was no endpoint listening at h    ttps:
    //indyslyncfe03.thmulti.com/BackupService/ that could accept the mess    age. T
    his is often caused by an incorrect address or SOAP action. See Inne    rExcept
    ion, if present, for more details. ---> System.Net.WebException: Th    e remote
     server returned an error: (404) Not Found.
       at System.Net.HttpWebRequest.GetResponse()
           at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel
       .HttpChannelRequest.WaitForReply(TimeSpan timeout)
       --- End of inner exception stack trace ---
    Server stack trace:
           at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponse
       WebException(WebException webException, HttpWebRequest request, HttpAbortR
      eason abortReason)
           at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel
       .HttpChannelRequest.WaitForReply(TimeSpan timeout)
           at System.ServiceModel.Channels.RequestChannel.Request(Message message,
        TimeSpan timeout)
           at System.ServiceModel.Channels.ServiceChannel.Call(String action, Bool
       ean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs,
      TimeSpan timeout)
           at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMeth
       odCallMessage methodCall, ProxyOperationRuntime operation)
           at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage mes
       sage)
    Exception rethrown at [0]:
           at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessa
       ge reqMsg, IMessage retMsg)
           at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData&
        msgData, Int32 type)
           at Microsoft.Rtc.Management.Hadr.BackupService.IBackupService.GetStatus
       (Nullable`1 category)
           at Microsoft.Rtc.Management.Hadr.BackupService.BackupServiceClient.GetS
       tatus(Nullable`1 category)
           at Microsoft.Rtc.Management.Hadr.BackupService.BackupServiceClientManag
       er.InvokeMethod(Func`2 func, Nullable`1 category, String funcName, String
      machineFqdn, Boolean throwExpectedException)
       --- End of inner exception stack trace ---
           at Microsoft.Rtc.Management.Hadr.BackupService.BackupServiceClientManag
       er.HandleCommonWCFException(Exception e, String serverFqdn, Boolean needTh
      row, String& errorMsg)
           at Microsoft.Rtc.Management.Hadr.BackupService.BackupServiceClientManag
       er.InvokeMethod(Func`2 func, Nullable`1 category, String funcName, String
      machineFqdn, Boolean throwExpectedException)
           at Microsoft.Rtc.Management.Hadr.BackupService.BackupServiceClientManag
       er.GetStatus(Nullable`1 category, IMachine& activeMachine)
           at Microsoft.Rtc.Management.Hadr.BackupService.InvokeBackupServiceSyncC
       mdlet.FindActiveBackupServiceMachine(),Microsoft.Rtc.Management.Hadr.Backu
      pService.InvokeBackupServiceSyncCmdlet

  • HELP : Crash during terminal upgrade... My BB8820 dead ?...

    Hello,
    The BB Desktop manager crashed during the upgrade of my BB 8820 terminal (Internet Explorer scrip errror messages)... Now my BB is like shutdown and is blinking RED....
    What can I do to restart it ?... Is it definitively dead ?...
    Please help....
    Thanks.... 
    Solved!
    Go to Solution.

    Use JL_cmder to wipe your device OS. Click this link for details.
    Check steps below for OS upgrade by installing device OS in
    the PC -
    Step #1:
    Before starting make sure that BlackBerry Desktop Software
    is installed on the Computer.
    Step #2:
    Make sure that you have installed updated device software
    installed in your PC. Check this link to get update device software from carrier OS download
    site.
    Step#3:
    Users can perform a full or selective backup of the data
    using the Backup and Restore tool in BlackBerry Desktop Manager by
    completing the following steps:
    1.      Connect
    the BlackBerry device to the computer running BlackBerry Desktop Manager
    2.      Open BlackBerry Desktop Manager
    3.      Double-click Backup & Restore
    4.      Select
    Backup to perform a full backup or
    select Advanced to perform a backup
    of specific databases
    5.      Choose
    a location to save the backup file, then click Save
    Step#4:
    To perform a clean install of the BlackBerry
    Device Software, perform the following steps:
    1.    Connect the
    BlackBerry smartphone to the computer and open BlackBerry Desktop Manager
    2.     Double-click
    the Application Loader icon
    3.     Click
    Next to start the installation process
    4.     Type
    your BlackBerry smartphone password, if prompted, and click OK
    5.     Click the
    check boxes next to the names of the applications you want to load, and then
    click Next
    6.     Click Advanced,
    and then click the check box beside Erase all currently installed
    applications.
    7.     Click Next.
    8.     Click
    the check box next to Do not automatically backup the application data
    during the loading process
    9.     Clear the box next to Backup and restore
    applications installed wirelessly
    10. Click
    Next -> Finish
    11.  When
    the process has completed, the message The
    loading operation was successful will appear
    12.  Click
    Close to return to BlackBerry Desktop Manager.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • WRT54GX Version1 Firmware Error "Error(12) about length during file upgrade"

    Does anyone know how to solve the following firmware upgrade problem.  About 1/10 the way into the firmware upgrade I get the following error message  "Error(12) about length during file upgrade".
    THanks
    Jim
    Message Edited by NasoShow on 01-27-2008 07:55 AM

    Yes,  I have an original that doesn't list the version number, but I chose version 1.

  • Running R/3 4.7 on a Windows Server 2008 System during an upgrade

    Dear all,
    I am plannung an upgrade project from R/3 4.7x200 to ERP6.0. The system is running on MaxDB. It's a single stack ABAP System.
    Currently the system is running on a 32 bit Windows Server 2003. During the project we want to go to a new x86 64bit hardware with OS Windows Server 2008.
    In order to use the speed of the new hardware also during the upgrade I want to move the systems to the new HW before starting the upgrade.
    The problem is that runnning R/3 4.7 on Windows Server 2008 is not supported by SAP. On the other hand running the target release ERP6.0 on Windows Server 2008 is officially supported by SAP. This information comes from the PAM.
    From the past I know that SAP allowed to run unsupported DB, OS and Release combinations during an upgrade project but I didn't find any information which fits to my situation.
    Does anyone have experience with this constellation? Is there an official statement concerning this request?
    Thanks for you support!
    Regards
    Bernd

    > So I opened the OSS Message (0000594749) to the component you mentioned but the support answered that this would be a consultant task to support me in this area (?!?)....
    I know one person who works for/in this component who did this several times to me too.
    > They asked me to open a thread here in SDN.
    That person did that too.
    > I send the message back to SAP and stated that I disagree with the statement that the confirmation of platform support is consulting...but until now I have no feedback.
    Just insist on a statement. If you still get the message back, contact the CIC (support dot emea at sap dot com) since you seem to be located in the UK according to your business card) and ask them to give you a different message processor.
    > So I hoped someone already has some official statement from SAP.
    Those special support statements are valid for a specific installation only so even if someone would have it for their installation it may not be valid for yours.
    > We would be running Production with release 4.7 on Windows 2008 for 3 weeks or so...and I will need official support for that, just for the case something goes wrong...
    I don't think this should be a problem. Technically the kernel supports it (according to the note) and also the database.
    Markus

  • Upgrade fails in the phase STARTSAP_TBUPG during the upgrade of CRM 4 to 5

    Hello,
    Upgrade failed with the below message in the upgrade phase STARTSAP_TBUPG during the upgrade of CRM 4.0 to CRM 5.0
    Error Message:
    SYSTEM START failed, code -1
                 -1: 'startsap.exe' returned an error
                 See file 'D:\usr\sap\put\log\R3up.ECO' for details.
    R3up.ECO:
    SAPup>  Starting subprocess startsap.exe with id 5844 at 20080402142258
    EXECUTING D:\usr\sap\put\exe\startsap.exe name=SID nr=00 SAPDIAHOST=Hostname
    Environment: dbms_type=mss
    Environment: dbs_mss_schema=cdu
    STARTSAP failed
    Details are written to D:\usr\sap\put\tmp\startSID.log
    Process with ID 6276 terminated with status -1
    startSID.log
    running D:\usr\sap\put\exe\sapstart.exe name=SID nr=00 SAPDIAHOST=Hostname -wait
    SAPSTART finished successfully on Host_SID_00, but at least one process doesn't run correctly:
         msg_server.exe, MessageServer, Running, 2008 04 02 14:22:58, 0:03:19
         disp+work.exe, Dispatcher, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, 2008 04 02 14:22:58, 0:03:19
         igswd.exe, IGS Watchdog, Stopped, 2008 04 02 14:22:58, 0:00:00
    D:\usr\sap\put\exe\sapstart.exe=>sapparam(1c): No Profile used.
    It is trying to start the shadow instance and failing by ending all the work process
    DEV_DISP:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        SID
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    150
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        5348
    Wed Apr 02 17:22:10 2008
    kernel runs with dp version 234(ext=109) (@(#) DPLIB-INT-VERSION-234)
    length of sys_adm_ext is 364 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 5348) [dpxxdisp.c   1245]
         shared lib "dw_xml.dll" version 150 successfully loaded
         shared lib "dw_xtc.dll" version 150 successfully loaded
         shared lib "dw_stl.dll" version 150 successfully loaded
         shared lib "dw_gui.dll" version 150 successfully loaded
         shared lib "dw_mdm.dll" version 150 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    Wed Apr 02 17:22:22 2008
    WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0100.qqq.nxst) took 12 seconds
    Wed Apr 02 17:22:40 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5373]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >HOSTNAME_SID_01                      <
    DpShMCreate: sizeof(wp_adm)          22968     (1044)
    DpShMCreate: sizeof(tm_adm)          3642120     (18120)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1296)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 05560040, size: 4281040)
    DpShMCreate: allocated sys_adm at 05560040
    DpShMCreate: allocated wp_adm at 05561B30
    DpShMCreate: allocated tm_adm_list at 055674E8
    DpShMCreate: allocated tm_adm at 05567518
    DpShMCreate: allocated wp_ca_adm at 058E0820
    DpShMCreate: allocated appc_ca_adm at 058E4E70
    DpShMCreate: allocated comm_adm at 058E65E0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 05967490
    DpShMCreate: allocated gw_adm at 059674D0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 05967500
    DpShMCreate: allocated wall_adm at 05967508
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 2039 blocks reserved for free list.
    ES initialized.
    WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12553]
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( HOSTNAME) [dpxxdisp.c   11867]
    DpStartStopMsg: send start message (myname is >HOSTNAME_SID_01                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 150
    Release check o.K.
    Wed Apr 02 17:23:20 2008
    my types changed after wp death/restart 0x1f --> 0x1e
    my types changed after wp death/restart 0x1e --> 0x1c
    my types changed after wp death/restart 0x1c --> 0x18
    my types changed after wp death/restart 0x18 --> 0x10
    my types changed after wp death/restart 0x10 --> 0x0
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1477
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 17:23:30 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Wed Apr 02 11:53:30 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     6916 Ended         no      1   0        0                                                                         
    1 DIA     7724 Ended         no      1   0        0                                                                         
    2 DIA     6044 Ended         no      1   0        0                                                                         
    3 DIA     4300 Ended         no      1   0        0                                                                         
    4 DIA     6992 Ended         no      1   0        0                                                                         
    5 DIA     2412 Ended         no      1   0        0                                                                         
    6 DIA      432 Ended         no      1   0        0                                                                         
    7 DIA     8168 Ended         no      1   0        0                                                                         
    8 DIA     5420 Ended         no      1   0        0                                                                         
    9 DIA     9712 Ended         no      1   0        0                                                                         
    10 UPD     4320 Ended         no      1   0        0                                                                         
    11 ENQ     3476 Ended         no      1   0        0                                                                         
    12 BTC     2676 Ended         no      1   0        0                                                                         
    13 BTC     6816 Ended         no      1   0        0                                                                         
    14 BTC     9636 Ended         no      1   0        0                                                                         
    15 BTC     8356 Ended         no      1   0        0                                                                         
    16 BTC     7004 Ended         no      1   0        0                                                                         
    17 BTC     7284 Ended         no      1   0        0                                                                         
    18 BTC    10048 Ended         no      1   0        0                                                                         
    19 BTC     4560 Ended         no      1   0        0                                                                         
    20 BTC     4196 Ended         no      1   0        0                                                                         
    21 SPO     4268 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Wed Apr 02 11:53:30 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    1
    2000
    1
    1
    --------++++--
    +
    DIA
    3
    3
    2000
    3
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          7
    wake_evt_udp_now     0
    wake events           total     3,  udp     3 (100%),  shm     0 (  0%)
    since last update     total     3,  udp     3 (100%),  shm     0 (  0%)
    Dump of tm_adm structure:               Wed Apr 02 11:53:30 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Wed Apr 02 11:53:30 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1477
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 17:23:35 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >HOSTNAME_SID_01                      < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (1860) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:1860  HANDLE:1448)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1477
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 17:23:36 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:1860  HANDLE:1448)
    DpStartStopMsg: send stop message (myname is >HOSTNAME_SID_01                      <)
    NiIMyHostName: hostname = 'HOSTNAME'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Wed Apr 02 17:23:37 2008
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12213]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 1356 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 1356 (pos=2)
    SiSelNRemove: removed sock 1356
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 1356
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 5348) [dpxxdisp.c   10461]
    Good Bye .....
    Please help me in resolving this issue
    Thanks,
    Vadi

    Hi Suhas,
    Have checked the hostname and it is correct.
    I am getting the below output When i run r3trans -x
    This is r3trans version 6.14 (release 700 - 04.03.08 - 16:43:00).
    r3trans finished (0000).
    I could see the below error message in dev_W21
    ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'sid_shd' setuser 'sid_shd']
    C  sloledb.cpp [ExecuteAndFlush,line 6470]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'cdu_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    C  Procname: [ExecuteAndFlush - no proc]
    C  setuser 'cdu_shd' failed -- connect terminated
    C  failed to establish conn. 0
    Thanks,
    Vadi

Maybe you are looking for

  • Dim Backlit Keyboard HP Pavilion DV6t-7000

    The backlit keyboard went dim after having it on for a few hours while working on some projects. I can only see the light if I look underneath the keys.  I have had the lights on for long times before it when dim. I have looked on these forums for an

  • Can't import songs to itunes

    i'm having trouble importing tunes from my desktop into itunes. i try to drag and drop but the songs don't import. i also tried itunes/file/add to library... this did not work either. plus just now i converted a song from vinyl using cd spin doctor a

  • Storage space question

    I am recieving messages that my storage space is maxed out.  I bought an external hard drive and connected that to the My Mac, and copied the files. What should I do next?

  • Multiple records are not loaded   in FILE to RFC  scenario

    Hi   ,      I did  File- to-RFC  scenario.. it was working fine.. but the problem is... from my file.. it was loading the first record only into the R/3 database..  what i have to do..  i'm new to XI..   generally a file must conatin multiple records

  • Own page

    Im going to make a site to advertise my own web site services now taking on advice people have given me on here i want to get it all into one page I was thinking having groups of related items inside a main fixed width containing DIV, and a different