[Solved] Find the module that claim a device

I have seen that Mandriva has a nice functionality in the "Mandriva Control Center". It gives the name of the module that claim a given device. Is there a command I can use to have the same functionality on arch. I do not want to install the Mandriva control center on arch. This is a big GUI tool, the purpose of which is to configure Mandriva. What am I looking for is a small CLI tool that give this precise functionality.
Last edited by olive (2010-10-26 12:02:29)

thestinger wrote:
this gets a bit of what you want:
lspci -k
Thanks! I had completely miss this option of lspci.

Similar Messages

  • All I need is to install Adobe Photoshop CS6 on two computers if someone could show me were to find the download that wouod solve my issue thanks

    All I need is to install Adobe Photoshop CS6 on two computers if someone could show me were to find the download that wouod solve my issue thanks

    Download CS6 products
    Mylenium

  • My Ipad and macbookair have been stolen. How can I find the imei code of both devices considering that were all registered on icloud?

    My Ipad and macbookair have been stolen. How can I find the imei code of both devices considering that were all registered on icloud?

    Unless you have configured iCloud on the MacBook Air and made sure that Find My Mac was turned on, you can't track that.  And even if you did do that, that is not a foolproof method of tracking, as it relies on the thief connecting to the internet using the guest account on the machine and not getting in to your account and disabling Find My Mac or wiping the hard drive and installing a clean system.
    As for the iPad, similar rules apply there.  If it is a wifi-only iPad, it cannot be tracked any other way.  If it has 3G, your wireless carrier may be able to help you track it.

  • Running FOXFIRE 6.0 on a Windows 7system and when I go to Sync I can not find the option of adding another device. Where is it?

    Trying to sync another computer to sync, but going from Tools to Options to Sync I can not find the Add A Device choice. have looked everywhere but can not find the frame that allows me to enter the codes from the second computer. Have installed the sync function on the first computer and have received a sync key.
    What am I missing and where do I find "Add A Device"?

    Thanks for trying to help solve a problem in Foxfire's sync function. I guess I haven't done a very good job describing the problem so I'll try again.
    My desktop computer is running Windows 7 and Foxfire 6.0. I had no problem establishing a sync account and obtaining the Foxfire Sync Key. Now I would like to sync my Asus Eee Transformer Tablet running Android 3.2 and Foxfire 3 (for Android). On the tablet I go to Sync, then Connect, and get the three-box code to be entered on the desktop computer where the sync account was established. So far, so good.
    I then go back to the desktop computer and in Foxfire click Tools, then Options, then click on the Sync symbol, then click on Set Up Foxfire Sync, which is the only option available. I am then taken to a page with two options: Create A New Account, or Connect. sunce I have already created an account I click on Connect. I then get a page with a three box code and am told to go to the other device (the tablet) and select Add A Device. Unfortunately, on the tablet the only choices available are Sync and connect, which returns a three box code. No where can I find a page or an option fo Add A Device and enter the three box code.
    So, in summary, I can not find w page to Add A Device and enter the three box code on either the desktop computer or the tablet. If all else fails, I guess I can go back to day one and establish a new sync account on the desktop computer, or completely give up on the sync, which is a nice feature but one that doesn't work.

  • PageComposer Error - Cannot find the module necessary for printing C5051

    Hi
    Having some problems trying to setup a Windows 2008 R2 print server with shared Canon iR C5051 printer
    I've created the printer, installed the 64 bit driver Canon iR-ADV C5045/5051 PCL6 v 20.90 and works fine for 64 bit Windows 7 clients, installed the 32 bit driver by selecting printer properties, sharing tab, additional drivers and selecting x86 and pointing to the 32 bit PCL driver. Driver installs fine on the print server without any errors.
    Goto 32 bit client, add printer, select the shared printer from the printserver, printer installs Ok. When the user however tries to print, get the error:-
    Canon PageComposer
    Cannot find the module necessary for printing
    Re-install the printer driver
    I've done this countless times, any idea's on how to fix ?
    Thanks

    Where is the code you posted? Running in a separate project, I assume? Does that project have a dependency on the project containing the app module specified?
    And just to check (although by default, JDev should do this for you)--the app module project has been compiled since adding the configuration, right? You need to check to make sure the config exists not only under Project/src, but under Project/classes.
    Edited by: Avrom Roy-Faderman on Oct 6, 2008 2:02 PM
    Oh, and BTW--I assume this is not a typical ADF application, right? In a standard ADF application, you would very rarely need to instantiate an application module in code like this; you could just let the data binding facility do it for you. The technique like the one you're using is most appropriate for purely programmatic, no-UI cases. (e.g., once I tried to implement an SMTP server backed by business components. That was an appropriate case for ditching databindings and doing the sort of thing you're doing, because it had no view layer (because it had no UI to render).

  • Finding the modules implemented in a SAP system

    Hi All,
        Is there any way of finding the modules implemented in a SAP system?
    Please reply.
    Thanks in advance
    Dhanapal S

    Hi Dhanpal,
    This is more of a functional question than a technical question. But if you can give a list of all the modules that you would like to know about, then it may be possible to get fair idea of which of them have been implemented.
    For example, if you'd like to know whether SD is imploemented or not, you would look for data in tables like TVKO, VBAK, VBAP etc.,
    In case of HR, you will see if there are any infotypes being used. for example tables PA0001 etc.,
    In case of MM, you will look at tables like MARA etc.,
    These points are by no means comprehensive. There are so many other factors that neeed to be considered. For example, if SD is implemented, then in general MM will also be implemented (may not necessairly be the case, but this is common).
    The point is that we examine the Customizing Data and Master Data for each of the modules and figure out if it is being implemented.
    But the easiest way is to ask the customer which ones he is implementing.
    Regards,
    anand Mandalika.

  • Where can I find the purchases that were made from itunes and apps?

    Where can I find the purchases that were made from itunes and apps?

    You can view the full purchase history on your account via your computer's iTunes : log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases.
    On an iOS device you can only view the last 90 days purchases (and optionally contact iTunes Support if you have a problem with one of them) via http://reportaproblem.apple.com

  • Is it possible to disable the trackpad when a wireless or usb mouse is present? With Lion 10.7.2, I can not find the checkbox that was there before I installed Lion. Is the option gone on Lion?

    Is it possible to disable the trackpad when a wireless or usb mouse is present? With Lion 10.7.2, I can not find the checkbox that was there before I installed Lion. Is the option gone on Lion?

    There is no BIOS in OS X. There is only the EFI stored in ROM that is not user modifiable. OS X is probably checking Bay 0 for the boot drive since that is where it should be. It won't check the Tempo drive since it is treated like an external drive. I suggest you open Startup Disk preferences to see if the Tempo device is selected as the boot device. If it isn't, then select it. That will probably shave off a few seconds in the startup time.

  • TS2972 used to be able to pick out which songs in iTunes in my computer were not on a 2nd computer on homeshare in iTunes 10.  Now with V11, cant find the button that compares two libraries and finds the songs that are different.  Anyone know how to do th

    Used to be able to pick out which songs in iTunes in my computer were not on a 2nd computer on homeshare in iTunes 10.  Now with V11, cant find the button that compares two libraries and finds the songs that are different.  Anyone know how to do this now?

    Jneklason wrote:
    ~snip~
    I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
    On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
    I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
    I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter?

  • My daughters ipod touch says disabled. went on help, did the sync, cant find the asst that asks me to restore.

    my daughters ipod touch says disabled. went on help, did the sync, cant find the asst that asks me to restore.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Where would I find the drivers for an external device after I install it?

    Okay, so I need help. I installed a driver for osx 10.5 thinking that installing the software 10.7 would support it. If it did, then it created a bigger problem, which is I cannot create a USB Ethernet connection in the networks pane. Mind helping out and telling me what I should do?

    you would generally find the drivers for an external device on the manfacturers website.  However, with printers for example, I have recieved updates directly through Software Update.

  • "Could not find the application that created this file" error when trying to combine files

    I am working with a user that is trying to combine a pdf & word doc (docx).  When they try to combine the files she gets the error:  "Could not find the application that created this file" & "Please select a file created by an application that resides on your computer".  The computer is running windows XP, with office 2010 SP1, & Adobe Acrobat Pro X.
    Per previous suggestions, I have already checked to see if Adobe PDFMaker is enabled as a Word plugin, and it is.
    Recentley the user was running Acrobat 6, and this error did not occur.  It is only after upgrading to Acrobat X that this is happening.  Any help with this issue would be appreciated.

    This can also be caused if the files are in a folder deep in the file system. For example C:/xxxxxxxxxxxxxxx/yyyyyyyyyyyyyyy/zzzzzzz/aaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbb /cccccccccccccccccccc/dddddddddddddddd/eeeeeeeeeeeeeeeeeeee/ffffffff/ggggggg/hhhhhhhhhhhhh hhhhhhhhhh/myPDF.pdf
    At some point Adobe PDFMaker cannot handle the path length (also, Windows can't handle the path length either eventually)
    Solution: move the files to a shorther path (perhaps the desktop) and try from there.
    I am filing a bug report with Adobe. A descriptive exception message should be thrown instead of "could not file the app.."

  • Ram? how do i find the type that my macbook pro has?

    ram? how do i find the type that my macbook pro has?
    and whats the best brand to use?
    thanks
    also what kind of express cards addons are available for the macbooks?
    thanks again

    A_MaStA wrote:
    You simply take out and look on the ram chip(s), the manufacturer's name should be all over the chip(s).
    Not very helpful. Micron / Crucial makes maybe 2000 RAM types. If all you have is the RAM and the label you may be thin on luck.
    Reading the manual +*that came with the mac*+ is one resource, regrettably rarely used before posting here.

  • Trouble creating a pdf converting Word doc ..."Could not find the application that created the file"

    Hello,
    I am working with Acrobat Pro 8 and am trying to create a pdf by converting a word doc. When I try that, I keep getting an error message, " Could not find the application that created this file...please select a file created by an application that resides on your computer." I can always convert a word into pdf first and then insert it into the pdf project that I am working on, however I have multiple files and I really would like to bypass that long step.
    I found another thread in this forum which talks about a simillar issue (http://forums.adobe.com/thread/429585).I tried the solution suggested there by Bill@vt regarding the print menu. I am not really sure if t have distiller installed, so I tried opening it in acrobat, but it failed. During the process, I got the follwing message "Check the Status column for a list of files that could not be printed".I do not have any clue how to check for AcroTray running in the background.
    I would really appreciate any help.
    Thanks!

    If Distiller failed to open, it sounds like you need to do a repair of your Acrobat installation. Have not heard that one before!

  • I've lost a load of notes, but dont know why or how to get them back. I cant find the folder that is in my Yahoo account that people have suggested might be the location for the messages.  I recently signed into iCloud for the first time.

    I've lost a load of notes, but dont know why or how to get them back. I cant find the folder that is in my Yahoo account that people have suggested might be the location for the messages.  I recently signed into iCloud for the first time.  Any idea how to get the notes back?   I really dont want to lose them.

    It should keep asking for the password, because it's trying to check for purchases... As soon as you login, it will see you have pending downloads and create the downloads section on the left below Purchases under the Store section. Then it will start the music downloads there, as they will be listed one below the other.
    You could just try to check your account balance or view your account and that will trigger a password request too. You can just click on that and say that now iTunes keeps asking for the password and ask him to help you with that. Trick would be to interrupt him so that he carries on with another task after, so he doesn't notice the download. Or you carry on with email or browsing which you were "busy" with when iTunes interrupted you for the password (stupid iTunes)

Maybe you are looking for