[SOLVED] Fresh Install Error - Issue with PGP Key 4096R/753E0F1F

Hello Guys,
This is my first topic. I have done all the research in this forum and in Google for the issue, with no luck in finding a solution. I have done several Arch linux installs before on Virtual Machines and PC's all of them working properly, except for this one that I can not get to pass the install phase.
Description of Hardware:
HP Laptop Pavilion Entertainment PC dv2-1030us
Athlon AMD Processor
4 GB RAM
300GB HD
ATI Video Card
Broadcom wireless Card (Default drivers Not Working)
Wired Network Card (Working)
I'm trying to install Arch from USB drive created from another arch machine via:
sudo dd if=/name_of_file.iso of=/dev/sdX
Using Arch Version:
Current Release: 2014.08.01
Included Kernel: 3.15.7
ISO Size: 559.0 MB
The above bootleable USB drive have been used to install Arch in another machine currently running it.
After creating the partitions on the drive, namely:
BOOT
SWAP
ROOT
HOME
And formatting them accordingly to the install guide, and having the system ready to download all the base and base-devel packages via:
pacstrap -i /mnt base base-devel
Right after it finishes downloading I get the following error:
downloading required keys in keyring...
:: Import PGP key 4096R/753E0F1F, "Anatol Pomozov <[email protected]>", created: 2014-02-04? [Y/n] y
error: key "Anatol Pomozov <[email protected]>" could not be imported
error: required key missing from keyring
error: failed to commit transaction (unexpected error)
Errors occurred, no packages were installed.
==> ERROR: Failed to install packages to new root
I first ignored the error and then tried to proceed with the installation process and executed the following sequences of commands:
genfstab -U -p /mnt >> /mnt/etc/fstab
and then tried to chroot with:
arch-chroot /mnt
Then i got the following error:
mount: mount point /mnt/etc/resolv.conf does not exist
chroot: failed to run command "/bin/sh": No such file or directory
Here is list of the Topics i Found in this forum that throw some light into the issue, some of the solutions I have tried with no luck at all:
https://bbs.archlinux.org/viewtopic.php?id=185089
https://bbs.archlinux.org/viewtopic.php?id=181057
https://bbs.archlinux.org/viewtopic.php?id=178185
I hope you can help find a direction where to start fixing this issue, since i feel pretty lost right now. By the way I'm a Newbie in the Arch Linux world, so there are a lot of thing that are not that obvious to me...
Thank you in advance.
Last edited by alejandroccs (2014-08-20 21:12:13)

I've had the same issue with an (outdated) Arch Linux iso. As far as I am aware, it is caused by pacman's keys becoming out of date.
I've managed to get around this before, but the exact method eludes me.
You could try just updating the archlinux-keyring package, by refreshing pacman (pacman -Sy), then reinstalling only that package (try pacman -S archlinux-keyring).
Then you should be able to continue as normal.
Note that this only affects the CD filesystem in RAM - it will not persists across reboots using the CD.
The reason why this might work is that the package archlinux-keyring might not be signed by the key you were having issues with. If it still fails, you could temporarily set the SigLevel for the core repo to 'Never', however this does disable package signing, at least until you reset the SigLevel.
Unfortunately, I could not replicate the problem in a Qemu VM, so I'm not sure how good my method is. Hopefully, it fixes the problem.
Here are some links that might help shed some light:
http://calvinx.com/category/unix-linux/archlinux/
https://wiki.archlinux.org/index.php/Pacman-key
Hopefully this is helpful!
pypi

Similar Messages

Exchange 2013 CU5 fresh install suffering issues with services not starting and coexistence with 2007

Hi everyone,
Hope you can help me out on a couple of issues I've been experiencing during the initial stages of a project to upgrade an on premise Exchange 2007 to 2013.
On Monday last week I installed the first Exchange 2013 server into the network after a few weeks of careful planning, information gathering and remediation of our current Exchange 2007 environment and associated systems.
The server itself has been having some issues from the word go, some of which I've resolved but none that are show stoppers but I want to get them resolved before building more servers and setting up the planned 2 x 2 node DAG's
The main problems are as follows:
There's usually one service that does not start following an OS restart and it's not always the same service. So far I've seen the following not start: DAG Management, Migration Workflow, Anti-spam Update, Unified Messaging, UM Call Router, Transport
Service.
The critical system event log entries are complaining of timeouts when the services are starting up but I can't imagine that the servers boot time is too long... It's a 2 vCPU/12Gb vRAM VM, Windows 2012 R2
I receive an error in the Event Log regarding RPC over HTTP Proxy
to one of the 2007 CAS servers (not our primary one). The first error was because the Windows Component was missing but since installing it, disabling Outlook Anywhere, reenabling it, restarting the server, I now have a new error which is shown further down
this post
The Exchange 2013 server install is pretty default, CAS/MBX roles and some basic configuration performed such as new DNS entries, Public SSL certs installed and assigned, URL's updates, SCP updated. I have review and resolved some errors from the event logs
for over chatty warnings about disk space (the warning is that we have loads of space...)
This is a brief outline of the environment:
Exchange 2007 SP3 RU13
UK - Two physical locations in a stretch LAN (100Mb WAN)
4 x CCR Cluster Mailbox Servers in two separate CCR Clusters
Cluster 1 - Windows 2003 R2: One physical, one virtual server - don't ask, legacy install and I know the virtual is not a supported configuration.
Cluster 2 - Windows 2008 R2: Two virtuals - New cluster built following a 4 day failure of Cluster 1. The aim was to move to supported config and decommission cluster 1.
Note: Migration of Cluster 1 to Cluster 2 was halted as 2013 was so close it seemed pointless to continue the migration and instead migrate both Clusters to 2013 once in production.
2 x Virtual Windows 2003 R2 - Hub Transport Servers
2 x Virtual Windows 2003 R2 - Client Access Servers
1 x Virtual Windows 2003 R2 - Unified Messaging Server
1 x Virtual Windows 2003 R2 - Edge Transport Server (DMZ)
US - One physical location
1 x Physical Windows 2008 R2 - Mailbox, Client Access, Hub Transport Server
Exchange 2013 CU5
UK - Installed into same site along side Exchange 2007 servers
1 x Virtual Windows 2012 R2 - Mailbox, Client Access Server
Problem 2 Error Message - Please note, server names and domain name changed:
Log Name:      Application
Source:        MSExchange Front End HTTP Proxy
Date:          18/07/2014 10:00:37
Event ID:      3005
Task Category: Core
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      EXC2013.domain.local
Description:
[RpcHttp] Marking ClientAccess 2010 server EXC2007CAS1.domain.local (https://EXC2007CAS1.domain.local/rpc/rpcproxy.dll) as unhealthy due to exception: System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly.
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)
Event Xml:
<Event xmlns=http://schemas.microsoft.com/win/2004/08/events/event>
<System>
    <Provider Name="MSExchange Front End HTTP Proxy" />
    <EventID Qualifiers="32768">3005</EventID>
    <Level>3</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-07-18T09:00:37.000000000Z" />
    <EventRecordID>64832</EventRecordID>
    <Channel>Application</Channel>
    <Computer>EXC2013.domain.local</Computer>
    <Security />
</System>
<EventData>
    <Data>RpcHttp</Data>
    <Data>EXC2007CAS1.domain.local</Data>
    <Data>https://EXC2007CAS1.domain.local/rpc/rpcproxy.dll</Data>
    <Data>System.Net.WebException: The underlying connection was closed: The connection was closed unexpectedly.
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.Exchange.HttpProxy.ProtocolPingStrategyBase.Ping(Uri url)</Data>
</EventData>
</Event>

Hi Off2work,
I've gone through the article and the Get-OutlookAnywhere commandlet looks fine (especially when compared with our working CAS).
Having looked through IIS I have spotted two additional misconfigurations with a missing setting to require SSL on the RPC folder and also the .NET version was not set.
I've now set those to Require SSL and .NET 2.0.5072 however this has made no difference following restarted of both 2007 CAS and 2013 servers.
I could potentially reinstall the CAS server or additionally decommission it as we have two of them and the other is not causing any errors with the 2013 server. This broken CAS server doesn't even have DNS records (except it's own hostname) or firewall
rules pointing to it, nor does it have any active client connections if I check with a quick netstat -a
As for UM, it's next on my list following some client/server connectivity testing so I have not yet assigned the SSL to the services or setup the dial plans, etc.
The services do start most of the time, but others then don't so it's not a consistent issue with just this service. On my current boot, the DAG Management service failed to start, but again I don't have a DAG implemented yet.
I will see if UM drops out of that list once I've configured it shortly
Thanks for taking the time to respond (and that goes to DareDevil too)

Fresh installed arch hanged with Skype in wmii during video call.

Fresh installed arch hanged with Skype in wmi during video call. The keyboard stopped reacting to any keys, including Ctrl+Alt+F1 (F2, F3, F4, F5, F6), Ctrl+Alt+Backspace.
The timer was actually working but updating in 3-5 seconds. While I had powerful laptop (i5 2.6GHz, 8Gb RAM). So,... I had to use power button to restart.
Any ideas how to avoid this in future?
Dis anybody experience similar issue?

try webcam scharing had 20 scharing on there and wibe them out
and myn works again

Install error 0X80080001 with Windows 7 RC1

Install error 0X80080001 with Windows 7 RC1

This Error Come when you have Intel Processor or if you dont that also you can solve the problem by getting whole detail.You will see the DVD Work in your friend P.c But show error in your p.c .get the solution from here.Web site: yadvi.com/how-to-install-window-7-in-intel-processor

[SOLVED]linux-headers upgrade fails with PGP signature error

Whe trying to upgrade the linux kernel using:
pacman -S linux linux-headers
it fails with the following error:
(2/2) checking package integrity [#################################] 100%
error: linux: signature from "Tobias Powalowski <[email protected]>" is unknown trust
error: linux-headers: signature from "Tobias Powalowski <[email protected]>" is invalid
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
I have tried deleting /etc/pacman.d/gnupg and the recreating it with
pacman-key --init
, I have also run
pacman -Syy
to make sure the repository is up to date. I read the wiki post about time, but my ntp daemon is running, and I have confirmed that my time is exactly right.
Last edited by MikeDacre (2013-04-01 23:32:27)

Hi,
Sorry, but that doesn't help me. I can't find any reference in that post to this problem. I get a similar issue when I try to upgrade mysql:
>> sudo pacman -S mariadb libmariadbclient mariadb-clients 16:06 Mon 04-01-2013
resolving dependencies...
looking for inter-conflicts...
:: libmariadbclient and libmysqlclient are in conflict. Remove libmysqlclient? [y/N] y
:: mariadb-clients and mysql-clients are in conflict. Remove mysql-clients? [y/N] y
:: mariadb and mysql are in conflict. Remove mysql? [y/N] y
Targets (6): libmysqlclient-5.5.30-6 [removal] mysql-5.5.30-6 [removal]
mysql-clients-5.5.30-6 [removal] libmariadbclient-5.5.30-2 mariadb-5.5.30-2
mariadb-clients-5.5.30-2
Total Download Size: 16.85 MiB
Total Installed Size: 152.41 MiB
Net Upgrade Size: 28.51 MiB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
libmariadbclient-5.5.30-2-x86_64 6.6 MiB 1479K/s 00:05 [#################################] 100%
mariadb-clients-5.5.30-2-x86_64 871.8 KiB 421K/s 00:02 [#################################] 100%
mariadb-5.5.30-2-x86_64 9.4 MiB 440K/s 00:22 [#################################] 100%
(3/3) checking package integrity [#################################] 100%
error: libmariadbclient: key "BBE43771487328A9" is unknown
:: Import PGP key , "Bartlomiej Piotrowski <[email protected]>", created 2011-10-10? [Y/n] y
error: key "Bartlomiej Piotrowski <[email protected]>" could not be imported
error: mariadb-clients: key "BBE43771487328A9" is unknown
:: Import PGP key 487328A9, "Bartlomiej Piotrowski <[email protected]>", created 2011-10-10? [Y/n] y
(3/3) checking package integrity [#################################] 100%
error: libmariadbclient: signature from "Bartlomiej Piotrowski <[email protected]>" is unknown trust
error: mariadb-clients: signature from "Bartlomiej Piotrowski <[email protected]>" is unknown trust
error: mariadb: signature from "Bartlomiej Piotrowski <[email protected]>" is unknown trust
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.

[SOLVED] - Arch Fresh Install - Errors

I have a few ERRORS from a Fresh Install that I need a bit of help with:
1. I've created a user (larry) and added myself to audio,lp,optical,wheel,storage,video,power,scanner and inserted the password.
But when I try to login with user larry and my password, I am unable to login. (My password is the same as root and I can login
as root.) Is there a way to reset my user password without deleting user larry? I don't want to lose the files I have in /home/larry.
2. In /var/log/xorg.0.log I have an error displayed:
(EE) Failed to load module "fbdev"
I've searched and found that I might also need to use pacman -S xf86-video-fbdev Do I also need to install this package even though
I have the xf86-video-intel (i915 Video Driver is used in Debian 6) installed? Some postings say don't use it as it is SLOW? I haven't
a clue????
3. My .xinitrc in /home/user has startxfce4 enabled, but xfce never starts. But, I can ONLY login as root, and that might be causing the
problem by not using /home/larry/.xinitrc I've only got two partitions on my USB Flash Drive and they are / (1.95 Gig) and also
/home (1.96 Gig). I'd like to get Arch running from USB Flash Drive before I install on a Hard Drive. If I am logged in as root, how can
I get xfce to start
4. I installed the ttf-dejavu fonts with pacman -S ttf-dejavu I got an error stating: mkfontscale: /usr/lib/libz.so.1 Version ZLIB_1.2.5.2 NOT FOUND!
How do I correct this missing lib problem?
I've got my Wifi working via a small script, so far I've kept fixing the errors/problems and I'm keeping a log so I can duplicate the process.
I just need a bit of help getting the above issues solved. When XFCE finally runs as my Desktop I'll be happy.
Thanks.
Larry
Last edited by lkraemer (2012-02-21 15:16:34)

1) Congrats.
2) You can remove it, but I don't think it should matter; it will likely only take up a bit of space.
3) Glad that's working. This means X is set up well. If you do find yourself in the TWM environment again, the default is pretty vanilla. To exit I believe you just type "exit" into each terminal, when there are no running 'clients' remaining, TWM and X quit. Alternately, you can Ctrl-Atl-F1 to get to tty1 (or where ever you ran startx/xinit from) and hit Ctrl-C to force-quit X.
Other) X can be fairly verbose. I don't think those warnings are anything to be concerned with, unless they seem related to a feature you are lacking. It is common for programs to try one feature and fall-back on another if it is not available. I suspect the gtk warning is just this sort. I get a boatload of gtk warnings whenever I run many gui apps, but everything works fine. The thunar error is likely because you don't have one of the addons installed. Thunar has many bells and whistles that can be added, and it may be checking for all of them when it starts. The warning says one of them is not there. If it's a feature you want, check out the thunar wiki's and install the required packages - otherwise, I suspect it's safe to ignore.
Do you have Xfce up and running?

KB26671 does not solve app install error

Has anyone else had an error when trying to download and install an app? I keep getting the error installing app, try again later when installing one specific app.
I was on the phone with BB tech support for over an hour, and went through the steps in that KB article numerous times. The paypal registration and authorization has not solved the problem. Has anyone been able to resolve the issue? I have been able to download both paid and free apps other than this one. Please help!!!

are you both referring to this article?
KB26671 "Install Error: There was a problem during installation. Please try again." is encountered when attempting to download an application from BlackBerry App World on the BlackBerry PlayBook tablet
if you wish to get the logs, please read this other article:
KB26038 How to obtain logs from the BlackBerry PlayBook
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Issues with Fn-keys and Synaptics touchpad on Asus X51RL laptop

Hello,
Since I installed Arch on my laptop, it's been working great. But I still have a few issues:
1) Fn-keys do not work. The brightness Fn-keys work, but I think that's done internally by the laptop, since it works even in the BIOS. The sound Fn-keys don't work, which is the ones I really need. How can I fix this? And I read somewhere that I have to switch from the kbd drivers to the evdev driver, is that true?
2) Since the latest update to the synaptics package in testing, the touchpad lost one-touch tapping, along with some other stuff. I know the solution is to disable hotplugging, but I sometimes need to plug in a keyboard or mouse, so I can't. How can I retain the scrolling and one-touch tapping settings from Xorg.conf AND hotplugging while using the latest synaptics?
3) The pre-configured options for the synaptics touchpad in the archwiki are good, but not that accurate. The size of the scrolling section of the touchpad is a bit too large, among other things. It's a minor problem compared to the others, but it'd be nice to fix it. In Windows, I definitely remember the settings being more accurate. Is there a way to have the Synaptics driver autodetect like the Windows one, or am I missing something here?
Thanks a lot in advance!

I have the S62J (Intel verified whatnot version) with this Asus, the brightness keys work. I think they are hard wired though as they work in the BIOS.
I tried the acpi-support, but I haven't had any luck with it yet. I'll have to mess with it some more to see if I'm missing something.
I'm also wondering if there isn't a different keyboard layout I should use. I notice that there is a 30-something-asus-something.fdi (I'm not on the notebook at the moment) on the system, but I don't know if it's being used by anything.
The other observation is that using the Fn button is throwing ACPI calls into my dmesg.log file. I need to research to find out how to use them.

Error Record with Same Key

Can anyone help me out with a master data load failure.
My request goes off red and the message looks somehow like "Record filtered in advance as error records with the same key exist", "Filter out new records with same key". I have already checked the duplicate handle record setting in DTP. Still why am i getting this error.
Would appreciate if some one could suggest me in this.

Hello Shridevi M ,
When I execute my DTP, I get a master data load failure : "Record filtered in advance as error records with the same key exist" . It's the same as you get. Please tell me how did you solved this probelm?
Thanks in advance,
Abdellatif

FF 8.0.1 Issue with cursor keys

Hi,
I encounter issue with using any of the keyboard cursor arrow keys (i.e. up/down/left/right, page up/dwn) in any textboxes on any websites that I open with FireFox.
I made sure I have the latest mouse/keyboard drivers installed and I also checked the behaviour by openiung a web site using Internet Explorer where these sympthoms do not occur.
When ever I enter any text and try to press arrow left/right the cursor didn't move. It only moves when I keep pressing the cursors key. The same happens by pressing Ctrl+arrow left/right or page down/up in multiline fields.
Any advices are greatly appreciated.
Thanks
Bodo

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

[SOLVED] Fresh install read only file system

I just did a fresh install of Arch this morning, and I have been trying to fix it most of the day. I was following the Beginner's Guide in the wiki as close as I could. (There were a couple items that didn't quite match up.) I only edited the files that it told me to, and then just minor edits. I checked out /etc/fstab during the process and noticed that none of my hard drives were present. I didn't think this was normal, so I opened another terminal and grabbed the UUIDs with ls -l /dev/disk/by-uuid/. I have two hard drives, but only sda1 (/) and sda2 (swap) showed up. (sdb1 is the entire second hard drive as /home.) Here is the default fstab:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
/dev/fd0 /media/fl auto user,noauto 0 0
The example documentation indicated that the file should have lines similair to...
/dev/disk/by-uuid/6334340b-87f1-406e-a777-13210ba85887 / ext3 defaults,noatime,nodirtime 0 1
/dev/disk/by-uuid/5ffd6a40-6d72-4710-82af-ae894e557f89 swap swap defaults 0 0
/dev/disk/by-uuid/32935c6c-6b75-4039-6b69-21f8b805e8f8 /home ext3 defaults,noatime,nodirtime 0 2
...but then I found an example while searching around that showed the lines like this:
UUID=6334340b-87f1-406e-a777-13210ba85887 / ext3 defaults,noatime,nodirtime 0 1
UUID=5ffd6a40-6d72-4710-82af-ae894e557f89 swap swap defaults 0 0
UUID=32935c6c-6b75-4039-6b69-21f8b805e8f8 /home ext3 defaults,noatime,nodirtime 0 2
In the first scenario, everything boots like normal, but when I tried to do anything that required writing to disk, the operation failed with a message about the file system being read-only. (I was trying to edit some config files because I couldn't get online.) Mind you, I was working as root the whole time, because I hadn't even gotten to adding a user yet. The only way I could make changes was to boot a live cd, mount, edit, reboot. remember to remove the live cd, reboot again, repeat.
In the second version of fstab, the bootup process kept trying to check the disk for errors. When it was done it wanted to reboot. Then it tried to check again (presumably because it couldn't save the fact that it had already checked).
I am at a loss. I really wish to use Arch Linux. I've been baby-fed for quite a while on Ubuntu, but it always ran slow. Please somebody help me! I am happy to provide more information; just let me know what you need.
Last edited by ravinggenius (2008-07-05 18:33:22)

Thank you so much for pointing out that typo! Turns out that is what was wrong. Well plus two of uuids had one typo each....
Also from what I can tell it doesn't matter which format I use for the uuids in fstab. I will use the UUID=xxxxx... version unless somebody can tell me why I shouldn't.

Install Error 0008 with WebWorks App

I have a problem with an app I wrote for BB10 and Playbook.
The app is accepted in the Blackberry World without any problems. But now the clients are complaining, that they are getting an install error 0008 after buying that app and installing on their playbook.
I myself now also bought my own app and had to discover, that I got the same error on my playbook.
At first this app was ported from Android, but the actual version was completly rewritten using HTML5 and WebWorks.
Searching the internet, I found, that it could be a signing error and I had to verify the signing with "blackberry-signer -verify <BAR_File>.bar". I did the verifying and it told me "Info: Bar verified" - so the bar-file should be ok.
If I deploy that bar-file to my playbook, it's working without any problems. But buying and installing from the Blackberry World gives the install error 0008 - and it doesn't matter, whether the app is already on the the playbook or not and if the developer mode is switched on or off.
I hope, that someone has an idea, whats going wrong here and can help me.
Thanks a lot from Germany

You'd probably have more success in either the WebWorks or BlackBerry World developer forums:
http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/bd-p/browser_dev
http://supportforums.blackberry.com/t5/BlackBerry-World-Development/bd-p/appworld_dev
Files & Folders, the unified file & cloud manager for PlayBook and BB10 with SkyDrive, SugarSync, Box, Dropbox, Google Drive, Google Docs. Free 3-day trial! - Jon Webb - Innovatology - Utrecht, Netherlands

How to solve Photoshop install errors ?

Can you help please ?
This message was received when I tried to download and install Photoshop CS6, 64 bit system, Windows XP:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF023, DW063 ... WARNING: DF054, DS013 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 17 error(s), 4 warning(s)
WARNING: DS013: Payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.
WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1
----------- Payload: {8085C16A-3148-40B4-BC8B-12ED59C9C478} Recommended Common Fonts Installation x64 2.0.0.0 -----------
ERROR: DF023: Unable to delete backup file at "C:\adobeTemp\backup\adobetmp153627033" Error 5 Access is denied.(Seq 58)
ERROR: DW063: Error committing command ARKDeleteFileCommand(Seq 58)
ERROR: DF023: Unable to delete backup file at "C:\adobeTemp\backup\adobetmp153227029" Error 5 Access is denied.(Seq 54)
ERROR: DW063: Error committing command ARKDeleteFileCommand(Seq 54)
ERROR: DF023: Unable to delete backup file at "C:\adobeTemp\backup\adobetmp150427016" Error 5 Access is denied.(Seq 26)
ERROR: DW063: Error committing command ARKDeleteFileCommand(Seq 26)
ERROR: DF023: Unable to delete backup file at "C:\adobeTemp\backup\adobetmp149327010" Error 5 Access is denied.(Seq 15)
ERROR: DW063: Error committing command ARKDeleteFileCommand(Seq 15)
----------- Payload: {63594DD4-0241-422A-93A5-B6530040E1C7} Required Common Fonts Installation x64 2.0.0.0 -----------
ERROR: DF023: Unable to delete backup file at "C:\adobeTemp\backup\adobetmp159027095" Error 5 Access is denied.(Seq 39)
ERROR: DW063: Error committing command ARKDeleteFileCommand(Seq 39)
ERROR: DF023: Unable to delete backup file at "C:\adobeTemp\backup\adobetmp155927085" Error 5 Access is denied.(Seq 8)
ERROR: DW063: Error committing command ARKDeleteFileCommand(Seq 8)
----------- Payload: {3289C0E8-78B9-47D4-98E5-F25BFF1CBED4} Adobe Photoshop CS6 Core_x64 13.0.0.0 -----------
WARNING: DF054: Unable to read Adobe file version for file path 'C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\A3DLIBS.dll'(Seq 2)
ERROR: DF012: Unable to find file(Seq 2)
ERROR: DF024: Unable to preserve original file at "C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\A3DLIBS.dll" Error 5 Access is denied.(Seq 2)
ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 2)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop CS6 English Language Pack_x64_AdobePhotoshop13-en_US_x64: Install failed
ERROR: DW050: - Adobe Photoshop CS6 Core_x64: Failed due to Language Pack installation failure

Errors "Exit Code: 6," "Exit Code: 7"
And not to state the obvious: XP64 never was officially supported for any Adobe product.
Mylenium

[SOLVED] Fresh Install, won't boot past grub

I did a fresh install of Arch (GPT partitioning table) with a 8 GB root directory, 138 GB home directory, 4 GB swap, and a 1007 KB bios boot partition. Everything went well, I got through the installation with no problems, but when I rebooted the computer. It showed this after the grub menu: https://lh6.googleusercontent.com/-UM-3 … 2014-06-22
So now my question is, was I supposed to do anything extra during the installation process? Or is this a hardware problem? Linux Mint, Ubuntu, Lubuntu, and Zorin OS works fine so I'm assuming I need to do something extra during installation...
Last edited by ryukiri (2014-07-03 21:44:44)

Trilby wrote:
ryukiri wrote:That only tells me how to make it a boot option...I assume I need to be chrooted from the install CD to do this.
You can do it one of two ways: boot the install cd/usb, mount all the partitions as in the original installation process, then chroot. From there you can just use pacman to install packages as it it were a normal system: `pacman -S linux-lts`.
There is, however, no need for the chroot. The alternative, and somewhat simpler, approach would be to boot the install media and mount the partitions as above, then use the pacstrap tool just like you did when installing the 'base' group: `pacstrap -i /mnt linux-lts`.
I think it is safer to arch-chroot because you still need to be chrooted to generate your grub.cfg "grub-mkconfig -o /boot/grub/grub.cfg"
Last edited by ugjka (2014-07-03 08:24:30)

Left shift issue with certain keys.

Hello,
From today, I have noticed an issue when using the right shift button,
It seems to only work with certain keys, the ones I have noticed do not work are ? and :
these works ok when using Left Shift
Right shift works ok for other keys.

Hi,
Thanks for the reply, I dont have one with me at present,
I find it strange, as I would normally agree with you but...
The shift key works ok when used with other buttons indicating the shift key is ok.
the ? and the : button work ok when no shift modifyer is present or when the shift key on the left hand side is used.
proving both bottons work just not when used together

[SOLVED] Fresh Install Error - Issue with PGP Key 4096R/753E0F1F

Similar Messages

Maybe you are looking for