[SOLVED]Installing usb wi-fi driver. Cannot compile modules :(

Hey there.
I'm trying to just compile this usb wi-fi driver, but here is the error.
Authentication requested [root] for make driver:
make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/3.13.6-1-ARCH/build M=/home/alex/Downloads/rtl/driver/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.20120405 modules
make[1]: Entering directory '/usr/lib/modules/3.13.6-1-ARCH/build'
make[1]: *** No rule to make target 'modules'. Stop.
make[1]: Leaving directory '/usr/lib/modules/3.13.6-1-ARCH/build'
Makefile:220: recipe for target 'modules' failed
make: *** [modules] Error 2
I DO have kernel-headers installed. I downloaded it from the core and did pacman -U <linux-header package> since I do not have internet connection. Is it not recognizing that linux headers is installed or is it a different issue?
Thanks for any help.
Last edited by Aquila (2014-05-29 03:13:12)

Hey there,
So I got around attempting to install 8192cu from the AUR
Found here:
https://aur.archlinux.org/packages/8192cu-dkms/
However, when I attempt to install the package(after makepkg) I get this error
make: Entering directory '/usr/lib/modules/3.14.4-1-ARCH/build'
Makefile:615: Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong not supported by compiler
CC [M] /var/lib/dkms/8192cu/v4.0.2_9000/build/core/rtw_cmd.o
gcc: error: unrecognized command line option â€˜-fstack-protector-strongâ€™
scripts/Makefile.build:308: recipe for target '/var/lib/dkms/8192cu/v4.0.2_9000/build/core/rtw_cmd.o' failed
make[1]: *** [/var/lib/dkms/8192cu/v4.0.2_9000/build/core/rtw_cmd.o] Error 1
Makefile:1274: recipe for target '_module_/var/lib/dkms/8192cu/v4.0.2_9000/build' failed
make: *** [_module_/var/lib/dkms/8192cu/v4.0.2_9000/build] Error 2
make: Leaving directory '/usr/lib/modules/3.14.4-1-ARCH/build'
Anyone have an idea on how to fix this?

Similar Messages

Z87-GD65 Can't install USB 3.0 Driver from MSI Site

I have windows 8.1 64bit and i can't install the usb 3.0 driver from the site. It says i do not meet the minimum requirements but after reading them i actually do. This board has so many problems with windows 8/8.1 i just might rollback to windows 7 to rid myself of the issues but shouldnt have to. Is there anything i might be missing?? drivers, software etc..

hmmm, sounds like windows 7 is the way to go with this board for stability. Looks like a future format is in order haha. I went to windows 8 for the boot time which is impressive over 7 but other then that...i hate it haha. Might format the old beast tonight and see what breaks next

[Solved] External USB 3.0 drive not seen under /dev/sd*

Ok, thought this would be easy but for some reason I cant get arch to see the physical drive. Its a new Seagate 2TB external USB 3.0 drive. I connected it to a windows laptop and it was quickly recognized (ntfs). I then installed ntfs-3g but still cant see it. I then formatted it under windows as ext4, but its still not seen. I tried this with 2 arch PC's, both the same issue. I seen a few other posts and tried a few things like making sure the mod xhci_hcd was running. I have the latest updates on each system. fdisk -l does not show the device at all! I can see and boot to other USB devices fine just not this one, maybe since its USB3.0??
I noticed here, they talk about maybe USB3 is broke in the new kernels, after 3.10.2 maybe?
Similar issue: https://bbs.archlinux.org/viewtopic.php?id=126299
Possible bug: https://bugs.archlinux.org/task/36296
However, I would think that by now, this would have been fixed as USB3.0 is more common? Other than trying to find a OLD 3.10.2 kernel any other advice?
dmesg:
[47653.187708] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
[48258.419876] r8169 0000:02:00.0 enp2s0: link down
[48435.623148] usb 6-1: USB disconnect, device number 2
[48697.691980] usb 6-1: new SuperSpeed USB device number 3 using xhci_hcd
[48938.171094] usb 6-1: USB disconnect, device number 3
[48975.057438] r8169 0000:02:00.0 enp2s0: link up
uname -a
Linux 3.15.7-1-ARCH #1 SMP PREEMPT Mon Jul 28 20:06:17 CEST 2014 x86_64 GNU/Linux
lsusb: (Seagate USB)
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 003: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
Bus 007 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 004: ID 0bc2:ab20 Seagate RSS LLC
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 002: ID 05af:8366 Jing-Mold Enterprise Co., Ltd
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 013 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 012 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsmod:
Module Size Used by
uvcvideo 74983 0
videobuf2_vmalloc 3368 1 uvcvideo
videobuf2_memops 2239 1 videobuf2_vmalloc
videobuf2_core 30407 1 uvcvideo
snd_usb_audio 131860 0
videodev 123032 2 uvcvideo,videobuf2_core
snd_usbmidi_lib 21428 1 snd_usb_audio
snd_rawmidi 20278 1 snd_usbmidi_lib
media 12611 2 uvcvideo,videodev
snd_seq_device 5244 1 snd_rawmidi
mousedev 10912 0
evdev 11784 8
mac_hid 3273 0
kvm_amd 52987 0
kvm 408583 1 kvm_amd
microcode 17157 0
serio_raw 5073 0
pcspkr 2059 0
k10temp 3242 0
snd_hda_codec_realtek 54803 1
r8169 59191 0
snd_hda_codec_generic 56366 1 snd_hda_codec_realtek
mii 4251 1 r8169
shpchp 25706 0
snd_hda_codec_hdmi 40396 1
radeon 1361721 21
snd_hda_intel 22831 1
snd_hda_controller 22975 1 snd_hda_intel
snd_hda_codec 104665 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
ttm 67215 1 radeon
snd_hwdep 6652 2 snd_usb_audio,snd_hda_codec
snd_pcm 83207 5 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 19294 1 snd_pcm
drm_kms_helper 39643 1 radeon
snd 61276 14 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
tpm_infineon 7786 0
tpm_tis 9310 0
soundcore 5551 2 snd,snd_hda_codec
tpm 23363 2 tpm_tis,tpm_infineon
hwmon 3346 2 k10temp,radeon
i2c_algo_bit 5480 1 radeon
i2c_piix4 10801 0
button 4765 0
processor 25153 0
vboxvideo 2029 0
drm 244846 25 ttm,drm_kms_helper,radeon,vboxvideo
i2c_core 41648 6 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon,videodev
pci_stub 1381 1
vboxpci 15059 0
vboxnetflt 17700 0
vboxnetadp 18547 0
vboxdrv 345858 3 vboxnetadp,vboxnetflt,vboxpci
ext4 494420 3
crc16 1359 1 ext4
mbcache 9155 1 ext4
jbd2 82948 1 ext4
sd_mod 37554 4
sr_mod 15026 0
crc_t10dif 1135 1 sd_mod
cdrom 35191 1 sr_mod
crct10dif_common 1436 1 crc_t10dif
ata_generic 3434 0
pata_acpi 3579 0
hid_generic 1217 0
usbhid 41250 0
hid 93052 2 hid_generic,usbhid
atkbd 17006 0
libps2 4571 1 atkbd
i8042 13666 1 libps2
serio 11018 4 serio_raw,atkbd,i8042
pata_atiixp 5163 0
ohci_pci 4192 0
ehci_pci 4152 0
ohci_hcd 35606 1 ohci_pci
ehci_hcd 64619 1 ehci_pci
ahci 24299 3
libahci 21772 1 ahci
xhci_hcd 149286 0
libata 174089 5 ahci,pata_acpi,libahci,ata_generic,pata_atiixp
usbcore 188509 9 snd_usb_audio,uvcvideo,ohci_hcd,ohci_pci,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
scsi_mod 138333 3 libata,sd_mod,sr_mod
usb_common 1712 1 usbcore
Last edited by banshee28 (2014-08-05 02:27:01)

R00KIE wrote:
Make sure you haven't blacklisted the uas driver. If the uas driver does not work well for you, check here [1] how to disable it for a particular drive.
[1] https://bbs.archlinux.org/viewtopic.php?id=183190
Awesome, THANKS!! Yes I got it to work following this and specifically Da_Coynul's post:
I was able to get my external drive working again by telling the usb-storage module to ignore uas for the device. Here is how to do it:
First, create a file named ignore_uas.conf in the /etc/modprobe.d directory containing the following*:
options usb-storage quirks=Vendor_ID:Product_ID:u
*(substitute your actual Vendor_ID and Product_ID obtained from the lsusb -v command).
Next, regenerate your inital ramdisk:
# mkinitcpio -p linux
Finally, reboot your computer.
Although this is not a solution to broken uas, at least it will let you use your drive as before hmm
https://bbs.archlinux.org/viewtopic.php … 2#p1428782
Thanks everyone...Now I can see the drive, and will work on formatting it with XFS...

[SOLVED] Installing on ZFS root: "ZFS: cannot find bootfs" on boot.

I have been experimenting with ZFS filesystems on external HDDs for some time now to get more comfortable with using ZFS in the hopes of one day reinstalling my system on a ZFS root.
Today, I tried installing a system on an USB external HDD, as my first attempt to install on ZFS (I wanted to try in a safe, disposable environment before I try this on my main system).
My partition configuration (from gdisk):
Command (? for help): p
Disk /dev/sdb: 3907024896 sectors, 1.8 TiB
Logical sector size: 512 bytes
Disk identifier (GUID): 2FAE5B61-CCEF-4E1E-A81F-97C8406A07BB
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 3907024862
Partitions will be aligned on 8-sector boundaries
Total free space is 0 sectors (0 bytes)
Number Start (sector) End (sector) Size Code Name
1 34 2047 1007.0 KiB EF02 BIOS boot partition
2 2048 264191 128.0 MiB 8300 Linux filesystem
3 264192 3902828543 1.8 TiB BF00 Solaris root
4 3902828544 3907024862 2.0 GiB 8300 Linux filesystem
Partition #1 is for grub, obviously. Partition #2 is an ext2 partition that I mount on /boot in the new system. Partition #3 is where I make my ZFS pool.
Partition #4 is an ext4 filesystem containing another minimal Arch system for recovery and setup purposes. GRUB is installed on the other system on partition #4, not in the new ZFS system.
I let grub-mkconfig generate a config file from the system on partition #4 to boot that. Then, I manually edited the generated grub.cfg file to add this menu entry for my ZFS system:
menuentry 'ZFS BOOT' --class arch --class gnu-linux --class gnu --class os {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
echo 'Loading Linux core repo kernel ...'
linux /vmlinuz-linux zfs=bootfs zfs_force=1 rw quiet
echo 'Loading initial ramdisk ...'
initrd /initramfs-linux.img
My ZFS configuration:
# zpool list
NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT
External2TB 1.81T 6.06G 1.81T 0% 1.00x ONLINE -
# zpool status :(
pool: External2TB
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
External2TB ONLINE 0 0 0
usb-WD_Elements_1048_575836314135334C32383131-0:0-part3 ONLINE 0 0 0
errors: No known data errors
# zpool get bootfs
NAME PROPERTY VALUE SOURCE
External2TB bootfs External2TB/ArchSystemMain local
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
External2TB 14.6G 1.77T 30K none
External2TB/ArchSystemMain 293M 1.77T 293M /
External2TB/PacmanCache 5.77G 1.77T 5.77G /var/cache/pacman/pkg
External2TB/Swap 8.50G 1.78T 20K -
The reason for the above configuration is that after I get this system to work, I want to install a second system in the same zpool on a different dataset, and have them share a pacman cache.
GRUB "boots" successfully, in that it loads the kernel and the initramfs as expected from the 2nd GPT partition. The problem is that the kernel does not load the ZFS:
ERROR: device '' not found. Skipping fsck.
ZFS: Cannot find bootfs.
ERROR: Failed to mount the real root device.
Bailing out, you are on your own. Good luck.
and I am left in busybox in the initramfs.
What am I doing wrong?
Also, here is my /etc/fstab in the new system:
# External2TB/ArchSystemMain
#External2TB/ArchSystemMain / zfs rw,relatime,xattr 0 0
# External2TB/PacmanCache
#External2TB/PacmanCache /var/cache/pacman/pkg zfs rw,relatime,xattr 0 0
UUID=8b7639e2-c858-4ff6-b1d4-7db9a393578f /boot ext4 rw,relatime 0 2
UUID=7a37363e-9adf-4b4c-adfc-621402456c55 none swap defaults 0 0
I also tried to boot using "zfs=External2TB/ArchSystemMain" in the kernel options, since that was the more logical way to approach my intention of having multiple systems on different datasets. It would allow me to simply create separate grub menu entries for each, with different boot datasets in the kernel parameters. I also tried setting the mount points to "legacy" and uncommenting the zfs entries in my fstab above. That didn't work either and produced the same results, and that was why I decided to try to use "bootfs" (and maybe have a script for switching between the systems by changing the ZFS bootfs and mountpoints before reboot, reusing the same grub menuentry).
Thanks in advance for any help.
Last edited by tajjada (2013-12-30 20:03:09)

Sounds like a zpool.cache issue. I'm guessing your zpool.cache inside your arch-chroot is not up to date. So on boot the ZFS hook cannot find the bootfs. At least, that's what I assume the issue is, because of this line:
ERROR: device '' not found. Skipping fsck.
If your zpool.cache was populated, it would spit out something other than an empty string.
Some assumptions:
- You're using the ZFS packages provided by demizer (repository or AUR).
- You're using the Arch Live ISO or some version of it.
On cursory glance your configuration looks good. But verify anyway. Here are the steps you should follow to make sure your zpool.cache is correct and up to date:
Outside arch-chroot:
- Import pools (not using '-R') and verify the mountpoints.
- Make a copy of the /etc/zfs/zpool.cache before you export any pools. Again, make a copy of the /etc/zfs/zpool.cache before you export any pools. The reason for this is once you export a pool the /etc/zfs/zpool.cache gets updated and removes any reference to the exported pool. This is likely the cause of your issue, as you would have an empty zpool.cache.
- Import the pool containing your root filesystem using the '-R' flag, and mount /boot within.
- Make sure to copy your updated zpool.cache to your arch-chroot environment.
Inside arch-chroot:
- Make sure your bootloader is configured properly (i.e. read 'mkinitcpio -H zfs').
- Use the 'udev' hook and not the 'systemd' one in your mkinitcpio.conf. The zfs-utils package does not have a ported hook (as of 0.6.2_3.12.6-1).
- Update your initramfs.
Outside arch-chroot:
- Unmount filesystems.
- Export pools.
- Reboot.
Inside new system:
- Make sure to update the hostid then rebuild your initramfs. Then you can drop the 'zfs_force=1'.
Good luck. I enjoy root on ZFS myself. However, I wouldn't recommend swap on ZFS. Despite what the ZoL tracker says, I still ran into deadlocks on occasion (as of a month ago). However, I cannot say definitely the cause of the issue; but it resolved when I moved swap off ZFS to a dedicated partition.
Last edited by NVS (2013-12-29 14:56:44)

[SOLVED] Arch freezes after mounting drives, cannot boot

Installed Arch maybe a week ago, and everything worked flawlessly until i rebooted today.
I havent done any major changes during that session that i recall, and after a reboot, my arch "froze" mid boot, after (what i think is) mounting drives (sda3 is OS, sda5 is Data):
/dev/sda3: clean, 168249/2298240 files, 1485743/9175040 blocks
[ 4.203801] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 4.204249] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 4.204628] microcode: failed to load file amd-ucode/microcode_amd.bin
[ 4.204940] microcode: failed to load file amd-ucode/microcode_amd.bin
systemd-fsck[248]: /dev/sda5: clean, 5230/3932656 files, 475548/15729635 blocks
This is all the info that i get.
If i remember right, this was shown when arch was booting up normally too, but it ussualy just hanged for a second or two at it. I've tried leaving it for almost half an hour now, and it didnt budge.
And it doesnt actually freeze, since there is a blinking " | " after the last line (no input is being accepted though)
This might be something stupidly simple, but im completely new to Arch (and linux in general)
I do have a live cd though, so if there's any conf that you think would help, i can get it.
Last edited by TolSatha (2012-12-28 01:09:24)

cfr wrote:
Welcome to Arch.
Please search before posting:
https://encrypted.google.com/search?hl= … lla-search
https://wiki.archlinux.org/index.php/Microcode
https://bbs.archlinux.org/viewtopic.php?id=144699
etc.
Will try resolving that, but ive had that before, and arch booted just fine. I doubt thats the problem.

Installing OSX on ext drive.

Is it possible to install os 10.6.8 snow leopard on an external drive & use it.The reason being that some softwares & plugins that I try to install on the ext drive cannot be installed without the OSX on it.If it is possible to install,will I loose data that I already have on that ext drive?
If there are links as to how to install osx on ext drive please post.Thanks.

1. Yes, if your computer has an Intel CPU and originally shipped with Mac OS X 10.6.8 or earlier.
2. Not unless it needs to be reformatted. Back up the content anyway.
3. Install it normally, picking the external drive when asked to choose a target for the installation. If you're running 10.7 or newer, insert the install DVD and restart with the C key held down.
(87498)

Cannot install NEC USB 3.0 Driver for Windows 7 - Now no USB 3.0

I was trying to update the usb 3.0 driver on my G770 - connecting a USB 3.0 portable drive (or USB 3.0 flash) would slow down Windows and browsing from folder to folder would hang.
I downloaded the latest driver from the site...
NEC USB 3.0 Driver for Windows 7 (32-bit, 64-bit) - Lenovo G770 Notebook (IN5CAR01WW5.exe)
and it asks for Renesas Electronics USB 3.0 Host Controller Driver disk during the installation.
Renesas Electronics USB 3.0 Host Controller Driver for Windows XP exists but the driver for Windows 7 is NEC USB 3.0 Driver for Windows 7 (32-bit, 64-bit)
What to do?
error:

Use the windows XP driver. They normally work fine.

How to install USB flash drive in windows 7

Could anyone please help to install USB flash drive to Windows 7. This will enable me to hook up keyboard and mouse to my laptop. Thank you so very much for any assistance.

Hi,
Could you please help us to know what is your computer, Please use the following instructions for find out the model/product of your machine:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00033108
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Installing Solaris 10 11/06 from an external USB CD-ROM drive

Hello. I recently purchased a new SunFire V245 SPARC server and would like to re-install Solairs 10 on it. However, the internal DVD-ROM is on back order from the vendor and will not arrive for a few days. I have an exteranl USB CD-ROM drive and the server sees it and the media when I access it from the Java desktop. However, I cannot boot from this device or see it in OpenBoot using any of the probe command. I've searched several forums and have seen that Solaris 10 can be installed from an external USB device on the x86/x64 platform. But I cannot find any information or steps on how to implement this procedure on the SPARC platform. Is this functionality possible? Or do I have to update my OpenBoot version? Please advise if possible. Thanks.

Hello Alex,
no, you can't use USB devices on SPARC as boot device.
The OBP (even updated ones) contains only support for the USB keyboard, but none for USB mass storage (which requires a device driver). The integrated USB ports are for slow devices like keyboard and mouse.
Using an external SCSI DVD-ROM works. Another choice is an installation via network.
Michael

Cannot install HP Photosmart 2610 Driver with windows xp

cannot install HP Photosmart 2610 Driver with windows xp. keep getting registry error messages part way through the instal.. any suggestions? Thanks

Hello,
Please check if you have an ADMIN rights to log into your PC.
Else, create an ADMIN user account and then run the installation ,
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Hi i have just purchased a mac pro. ive installed word for mac as i wanted to transfer word documents from a windows pc, which are ona usb stick. however i cannot open the usb stick. can anyone tell me what im doing wrong!

Hi, I've bought a mac pro and installed word for mac, as i wanted to transfer word documents to the new pc. I saved the documents ona usb stick but I cannot open the documents from the stick. What am i doing wrong?
thanks

Welcome to the Apple Support Communities
First of all, check that you are looking for your USB drive in the correct place. To do it, first connect the USB drive. Then, open a Finder window (press the left icon of Dock) and choose your USB drive on the Finder sidebar, under "Devices". Finally, just copy the documents you need to the internal disk.
If you want to show the USB drive in Desktop, open Finder menu (on the menu bar) > Preferences > General, and tick "External drives"

Cannot install driver, cannot update driver, cannot uninstall device

Dcannot install driver, cannot update driver, cannot uninstall device7 SB Audigy4 24 bit
Hi,
I have read the faq & tried numerous time all suggested steps, to no avail
In device mgr, I am unable to uninstall the device, services.exe goes to 50-80% cpu usage for hours & hours, without ever uninstalling my SB
If on the other hand, I try to install with one of the recommended driver, it invariably tells that it need to uninstall a previous driver, then it stays at the uninstall full sreen for hours. Oddly enough, device mgr gives me a code 8 (no driver installed)
I need to nuke whatever's left of the driver, something ctzapxx.exe has not been able to help me do so far
I have spent the better part of the last 3 days trying to get this fixed, you guys are my last hope before I reformat
Tks in advance

Thank you for the information, Harry. If you are installing from the HP CD which came with you then let us check with downloading the All-in-One software from the hp website and then check for the result.
First of all you need to uninstall the software which was already installed on your Vista computer , then we need to download the software and install the All-in-One software.
Here are the uninstallation steps to uninstall the software from the computer:
To completely uninstall the software, run the uninstaller at level three using these steps:
1. Turn the All-in-One off and disconnect any USB/Ethernet cable from All-in-One to computer.
2. Insert the all-in-one CD-ROM into the computer. Cancel any installation windows that appear.
3. Click Start on the taskbar and then click Run.
4. In the command box type the following command and press Enter key:
X:\Util\CCC\Uninstall_L3.bat
(X: is the CD-ROM drive letter of that the all-in-one CD-ROM is in)
Follow the above steps to uninstall the All-in-One software and then restart the computer .
Then download the software from the below web link:
full feature software in vista
Click on the above link and open the web page,after you open the above link click on download only button and save the file onto your desktop.
Here are the instructions to install the All-in-One software:
1) Unplug the USB cable from the back of the computer
2) Install HP Software using downloaded file => Double click on downloaded file => Choose Run and follow the onscreen instructions
3) Before starting the installation disable the antivirus and firewall and then proceed with the installation.
4) Plug in the USB cable when it prompts to connect in the midway of installation
Note : It is important that you connect the USB cable only when the software prompts you while you are installing the software.
Once you install the All-in-One software check for the result and let us know.

Usb flash boot drive with mavericks is damaged cannot get another download from apple

Hello
I successfully downloaded Mavericks 10.9 onto my Macbook Pro and clean installed, when I went to carry out the same procedure on the Mac Mini the USB flash boot drive with the downloaded Mavericks was damaged. I cannot get another copy of Mavericks as Apple do not have downloads available. I do no wish to upgrade to Yosemite just yet. How can I get a copy of Mavericks, I did looked at my account and Mavericks is there any suggestions would be appreciated.
Thank you

If it is in the Purchases tab of the App Store, you should be able to download it.

Cannot find a mounting to install a second hard drive in my Qosmio x70-A

I have looked all over the internet and have gotten no where in my search for a mounting for the secondary hard drive bay in my laptop. Anybody know where I can get one?
Also I've included pictures of the secondary drive bay and the primary bay. From the looks of it I can't use the same type of mounting in the secondary bay as in the primary.
Attachments:
20140714_220231.jpg ‏1868 KB
20140714_220242.jpg ‏2068 KB

I have the same issue, and have found Toshiba support to be completely unacceptable on this.
After getting bumped around from sales to tech to sales because "we don't answer that question, you have to talk to the other guy", I finally got a "straight" answer from sales:
"Sir, we DO NOT sell that part, and therefore I CANNOT tell you a part or model number for the part you may need to install that second hard drive. The only thing you can do is talk to our parts supplier over at National Parts (1 800 524 8338) and ask them to provide you with the model numer or sell you the part."
At this point, I was annoyed, but thought that at least with a straight answer I could proceed.
After a very short hold time with National Parts, a very kind associate answered the phone and listened to my tale of woe. Unfortunately, she was unable to help and said:
"Unfortunately, sir, I have listed that while there is no caddy for the second hard drive slot on you X70-A specific model, there is supposed to be a mounting bracket. Unfortunately, we have been trying for MONTHS to have Toshiba give us the part number, spec, or any other information other than 'mounting bracket', and therefore I'm afraid we have neither a part to sell you nor a part number for you to go looking for one".
At this point annoyance is full-blown anger. How is it possible for Toshiba to make something that should be SO SIMPLE so VERY VERY VERY complicated and impossible.
"Sorry, if you didn't want to spring for the dual drives when you bought it, you're hosed forever sucker." Does not seem like an excellent customer service strategy.
This was the FIRST Toshiba I'd ever decided to spend my hard-earned money on, and now it's a machine I can't upgrade because they can't get their act together with their parts supplier or in-house over a 3 dollar bracket?
UNACCEPTABLE.
The pictures the original poster shows are exactly what I have, no need to add more o fthe same.
ANY help, Toshiba?

Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

You can go strait to SL, all you need is a retail SL DVD available from Apple for $20. The US online store has them at:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

[SOLVED]Installing usb wi-fi driver. Cannot compile modules :(

Similar Messages

Maybe you are looking for