[SOLVED] journald not logging

Hi all,
I am really confused, since journald is not logging anything. Actually there is no log file at all. I did not change anything, so I have no idea what's going on. So, do you have an idea, what I should try next (re-installing the packets didn't fix the problem).
Thank's in advance!!
no log files:
% journalctl -xn
No journal files were found.
The reason is that, journald is not running.
% systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● systemd-journal-flush.service loaded failed failed Trigger Flushing of Journal to Persistent Storage
● systemd-journald.service loaded failed failed Journal Service
● systemd-journald.socket loaded failed failed Journal Socket
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
The status for the journald-service is:
% systemctl status systemd-journald.service :(
● systemd-journald.service - Journal Service
Loaded: loaded (/etc/systemd/system/systemd-journald.service; static)
Active: failed (Result: start-limit) since Sat 2014-09-27 14:20:03 CEST; 4h 9min ago
Docs: man:systemd-journald.service(8)
man:journald.conf(5)
Process: 432 ExecStart=/usr/lib/systemd/systemd-journald (code=exited, status=1/FAILURE)
Main PID: 432 (code=exited, status=1/FAILURE)
Status: "Shutting down..."
and the status of the socket
% systemctl status systemd-journald.socket :(
● systemd-journald.socket - Journal Socket
Loaded: loaded (/etc/systemd/system/systemd-journald.socket; static)
Active: failed (Result: service-failed-permanent) since Sat 2014-09-27 14:20:03 CEST; 4h 9min ago
Docs: man:systemd-journald.service(8)
man:journald.conf(5)
Listen: /run/systemd/journal/stdout (Stream)
/run/systemd/journal/socket (Datagram)
/dev/log (Datagram)
Last edited by mkind (2014-09-28 15:30:00)

hm.. here my output of the service:
% cat /etc/systemd/system/systemd-journald.service
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Journal Service
Documentation=man:systemd-journald.service(8) man:journald.conf(5)
DefaultDependencies=no
Requires=systemd-journald.socket
After=systemd-journald.socket syslog.socket
Before=sysinit.target
[Service]
ExecStart=/usr/lib/systemd/systemd-journald
Restart=always
RestartSec=0
NotifyAccess=all
StandardOutput=null
CapabilityBoundingSet=CAP_SYS_ADMIN CAP_DAC_OVERRIDE CAP_SYS_PTRACE CAP_SYSLOG CAP_AUDIT_CONTROL CAP_CHOWN CAP_DAC_READ_SEARCH CAP_FOWNER CAP_SETUID CAP_SETGID
WatchdogSec=1min
# Increase the default a bit in order to allow many simultaneous
# services being run since we keep one fd open per service.
LimitNOFILE=16384
and pacman says they are owned by no package
% pacman -Qo /{usr/lib,etc}/systemd/system/systemd-journald.{service,socket}
/usr/lib/systemd/system/systemd-journald.service is owned by systemd 216-3
/usr/lib/systemd/system/systemd-journald.socket is owned by systemd 216-3
error: No package owns /etc/systemd/system/systemd-journald.service
error: No package owns /etc/systemd/system/systemd-journald.socket
actually no package owns any of the services in /etc/systemd/system/.
Last edited by mkind (2014-09-28 13:29:31)

Similar Messages

[SOLVED] Slim not logging me in into openbox

Right. Since my Arch Xfce system crashed on me, I decided to reinstall, this time with openbox.
The problem is that after I have configured ~/.xinitrc and X, and Slim seems to be configured too, when I rebooted, logging in through slim only put me back to slim, for some reason. What should I do? I cannot log in through slim at all now.
Last edited by Firepower (2010-01-18 08:00:51)

Also, to get a clue you can use something like this to catch the error messages:
exec ck-launch-session openbox-session 2> ~/.xsession_errors
After your X session aborts and puts you back in the Slim login screen, drop to VT1 and check your ~/.xsession_errors file.
Last edited by hw-tph (2010-01-17 11:50:03)

Can not log on after successfull installation - SAP Netweaver Trial JAVA

Hello,
I have successfully downloaded and installed the NW Java trial. (NW_JAVA_700SP14_SR3.rar)
I can see in SAP MMC that all the services was started. At http://vjm:50000 I can see the default page.
Unfortunately I can not log on to any page that need SAP authentication (eg. User management, NW administrator),
but can log to pages which needs just basic browser authentication (eg: Web Service Navigator, UDDI client, System Information).
The portal also does not let me log on (http://vjm:50000/irj ).
When I get the standard SAP NW log on screen, after entering Administrator with the correct master password, simply the log on screen appears again (the password field is cleared). I also tried some incorrect user name / password just to check the difference. In that case I got the correct error message.
I installed the software with WMware, Windows 2003 server, allocated enough disk space and 1.6Gbyte RAM. The installation finished without errors. Prior, I installed the MS loopback too (tried without it too). In SAP MMC everything is green, only have an open alert in J2E 00 -> Services -> Security -> Aggregated Data -> Invalid session count "262 > 200 last reported value above treshold".
I am using the standard internet explorer coming with Win2003 server.
Tried the users: Administrator, SDM, Guest, ADSUSER. I know that the password is correct, because I don't get any error if I use it, just getting the log on screen back ...
Could anyone pls help me how can I log on to the system? Or is there any security trace file or log which could help me solve this problem?
I am desperately trying to install this trial, I completely reinstalled the software 5 times but still can not use it
Laszlo

Hi,
is your problem persisting?
CAVE: If you use a wrong user/pw combination > 3 times the account of the user may be locked!
try j2ee_admin instead of administrator or try adm together with your Masterpassword
Do you have to specify the users pw inside the installation procedure? In "normal" installations this has to be done.
If not the pw´s in the documentation of the previous answer`may fix your problem.
The sap mmc is irrelevant for user authentication.
Green means your system is running, nothing else.
kind regards
Tom

I have an original iPad and when I try to login on Yahoo through Safari it will not log me in. What could be the problem?

My original iPad will not log me into Yahoo through Safari. It's been this way for one week. I can access Yahoo on my PC with no problem so I think the problem is my iPad or Safari.

Your description of the behavior of the ipad1 during a login attempt is more precise than mine, it is the exactly as my ipad1 reacts and supposedly as all other iPad1 will behave. This could be solved either by apple with an update of the safari browser for ipad1. I do not think that apple will do that. Also yahoo could undo the change of the login procedure which they recently made and which is incompatible do the ipad1s safari browser. They hardly will do that either if not be urged by lots of ipad1 users.
!!!! SO SEND COMPLAINS TO YAHOO, PHONE THE HOTLINE ETC !!!!!!
Otherwise you have to buy a new iPad or to change the email provider.

Oracle error 1012 ("Not Logged On") & AUTOTRAN=Y

Hi.
I have a problem trying to access an Oracle 8.0.6
database from a 6.5 Tuxedo server.
Both TMS and server execute tpopen correctly
All services are declared as AUTOTRAN
Everything seems to be OK according to the logsgenerated by Oracle XA libraries
However, I always get the Oracle error 1012 ("Not Logged On")
when executing SQL statements from my pro*C server.
I just can't figure out why this error occurs.
I also tried to explicitly open a transaction from the client,
but the result is exactly the same (tpbegin is successfull,
however).
Could someone help me to make this work ?
Thanks.

Solved by removing "DB=<db>" from my OPENINFO string, as far as this parameter
should only be used when using proc*C "EXEC SQL ... AT <db>" statements.
"Mathieu Chauvin" <[email protected]> wrote:
>
Hi.
I have a problem trying to access an Oracle 8.0.6
database from a 6.5 Tuxedo server.
Both TMS and server execute tpopen correctly
All services are declared as AUTOTRAN
Everything seems to be OK according to the logsgenerated by Oracle XA libraries
However, I always get the Oracle error 1012 ("Not Logged On")
when executing SQL statements from my pro*C server.
I just can't figure out why this error occurs.
I also tried to explicitly open a transaction from the client,
but the result is exactly the same (tpbegin is successfull,
however).
Could someone help me to make this work ?
Thanks.

Oracle Instance shows connected,Yet am ORA-01012: not logged on

Hi experts,
Please help in log in to my database, which unfortunately was happening an hour before, but now it is not working
In between I only did a change in some permission stuff for my base directory, but later brought it back to original permissions.
Still it is haunting me..
I have set up my SID/HOME/PATH perfectly, tried to check processes at OS level, they are less, still nothing is happening though database is up and running.
I can see it at OS level and through ALert log..
==================
oracle@dap-csw-ora01 /home/oracle > ps -ef|grep pmon
oracle 3145946 1 0 18 feb - 0:44 asm_pmon_+ASM1
oracle 7995430 1 0 18 feb - 0:50 ora_pmon_adobe_2
oracle 13828212 11141232 0 14:59:09 pts/0 0:00 grep pmon
oracle 7471386 1 0 18 feb - 0:57 ora_pmon_fxss_1
oracle@dap-csw-ora01 /home/oracle > sqlplus
SQL*Plus: Release 11.2.0.3.0 Production on Thu Feb 21 14:59:12 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Enter user-name: /as sysdba
Connected.
SQL> show user
USER is "SYS"
SQL> select instance_name,status from v$Instance;
select instance_name,status from v$Instance
ERROR at line 1:
ORA-01012: not logged on
Process ID: 0
Session ID: 0 Serial number: 0

CKPT wrote:
Now I understood,..it is not a problem with permission something else is making this mess..though unknown..
I bounced one of the database after taking permission from apps team, Now it works perfect...no issue whatsoever..
But I want to know the reason..I dont want to face it any more...Whenever oracle installs[OUI], It knows well what the permissions to be assigned and what needed.
You should not disturb them, What are the users, groups, executable, read, write permissions earlier and after changes and now?
And i interestingly wanted to know why you wanted to test such things on production. Its like playing with fire so be cautious or else it costs a lot :)Basha,
I don't think that there was any other way for the OP to solve the error. Either he could wait (which doesn't help normally in this error) or had to bounce the db, which he did. Also, with permission he meant, telling to the App team and than going for a bounce. I can't a mentioning of changing permissions anywhere .
Aman....

Could not log on to SAP R/3 from XI system to import IDOC/RFC objects

Could not log on to SAP R/3 systems from XI system to import IDOC/RFC objects:
As soon I enter the SAP IP address, system number, user id and passowrd , getting following error.
Details
java.lang.ArrayIndexOutOfBoundsException
STACKTRACE:
com.sap.aii.ibrep.sbeans.upload.RemoteUploadException: java.lang.ArrayIndexOutOfBoundsException
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceBean.openSAPSource(UploadServiceBean.java:79)
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceRemoteObjectImpl0.openSAPSource(UploadServiceRemoteObjectImpl0.java:320)
 at com.sap.aii.ibrep.sbeans.upload.UploadServiceRemoteObjectImpl0p4_Skel.dispatch(UploadServiceRemoteObjectImpl0p4_Skel.java:196)
 at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:291)
 at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
 at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:119)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
java.lang.ArrayIndexOutOfBoundsException
Can anyone help me to solve this issue.

Venkat,
You can download them from http://service.sap.com/download
For 4.6c follow
Download
 Support Packages and Patches
 Entry by Application Group
Select Support Packages and Patches -> SAP Application Components -> SAP R/3 -> SAP R/3 4.6C -> Entry by Component
Mainly You need SAP ABA 4.6C and SAP BASIS 4.6C and SAP APPL 4.6C
The most latest one is Support Package 50. What you can do is after applying half of them you can try to logon from XI system for import of RFC/IDoc.
regards
SKM

I have a problem in imessages I can not log on

I have a problem in imessages I can not log on and update through the application.Every time you logon work shows me a message saying "The server encountered an error processing registration. Please try again later"

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Restart your broadband device and your router, if different. You may have to skip this step if you don't control those devices.
Step 3
From the menu bar, select
 ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or obviously invalid, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 4
Back up all data, then take the steps suggested in this support article.
There are five steps in that article. Please take all of them. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 5
From the menu bar, select
 ▹ System Preferences ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
Step 6
Select from the menu bar
 ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 7
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 8
Boot in safe mode and log in. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, reboot as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but didn't work when you booted out of safe mode, stop here and post your results.
Step 9
Reset the NVRAM.
Step 10
Reinstall OS X.
Step 11
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support.

My new macbook pro (Mountain Lion) will not log into my 1and1 server to connect to my e mail. My snow leopard macbook does not have this problem - Apple support say it is a 1and1 problem! do I have to wait for an update of Mountain Lion?

My new macbook pro (Mountain Lion 10.8.1) will not log into my 1and1 outgoing mail server. ( It will receive mail - but does not send)My old Snow Leopard macbook does not have the same problem ( server settings etc. are identical) . Apple Support say its a 1and1 problem , 1and1 say it is an operating System prob - I have tried changing port numbers.

My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck!

Cisco Secure ACS not logging correctly

I asked an ACS question in this thread the other day and it got answered so not sure if this is the right thread or not but I couldn't see any ACS questions under the Security or AAA threads.
I'm running 2 ACS 4.2(patch 11) servers and the logging seems to have stopped working. Whilst some events are logged sporadically (some devices in particular consistently work - CatOS switches seem to still log TACACS accounting), the majority of messages I would expect to see in most of the logs are not present.
I have tried changing the frequency of the logging from monthly to weekly to daily and each time I change the frequency its as if some messages that were "held up" suddenly appear in the penultimate log file where they should have been present the whole time.
I can confirm that the ACS server is handling the AAA correctly just that it seems to not log it.
I was thinking about raising a TAC but thought I'd try here first.

Paul
I was browsing by and I want to express our collective thanks to those who raise a question and then come back to post an answer when they have solved the issue. It helps make the forum more useful when people can read about an issue and can read what resolved the issue. And it is even better when the original poster is able to post the solution.
So thanks to you.
HTH
Rick

After update to 11.3.1 users are not logged in to the ZAA

Hi,
we did a update from 11.2.3 to 11.3.1 a few weeks ago. All works fine but there is one problem. A lot of users are not logged in to the ZAA. If i try to start a remote session with the username i get the message the user is not logged in to any device.
If i connect me to the device and look at the ZAA the user is not logged in and i can not log in because i get the error message that the username or password is wrong.
The solution is to go to the registry -> HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\Cache\domain.local and i have to delete the user.
After that the login works fine
Sometimes i have to delete the user in this registry key too -> HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\CachedUserZenNames
Is that a known bug? What can i do to solve that problem?

I would recommend an SR.
You should not have to do that.
There were some similar bugs in the past, but were fixed in 11.2.x and
should not exist in 11.3.x at all.
On 10/15/2014 7:26 AM, SteffenMuch wrote:
>
> Hi,
>
> we did a update from 11.2.3 to 11.3.1 a few weeks ago. All works fine
> but there is one problem. A lot of users are not logged in to the ZAA.
> If i try to start a remote session with the username i get the message
> the user is not logged in to any device.
> If i connect me to the device and look at the ZAA the user is not logged
> in and i can not log in because i get the error message that the
> username or password is wrong.
>
> The solution is to go to the registry ->
> HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\Cache\domain.local
> and i have to delete the user.
> After that the login works fine
> Sometimes i have to delete the user in this registry key too ->
> HKEY_LOCAL_MACHINE\SOFTWARE\Novell\ZCM\ZenLgn\Hist ory\CachedUserZenNames
>
> Is that a known bug? What can i do to solve that problem?
>
>
Going to Brainshare 2014?
http://www.brainshare.com
Use Registration Code "nvlcwilson" for $300 off!
Craig Wilson - MCNE, MCSE, CCNA
Novell Technical Support Engineer
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

HT4798 I can not log into my computer to download an app.   I wrote it down but it is not working. I can not find a way to access it or reset it? help

I can not log into my computer to download an app. my password is not working. i wrote it down but it is not working.
is there a way to reset this or have it emailed to me? this is different from my apple ID password.

Only you have the password. No one can email it to you.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself
    Reset OS X Password Without an OS X CD — Tech News and Analysis
    How To Create A New Administrator Account - Hack Mac

Eprintcenter locked out both my e-mail addresses still not logged in

eprintcenter locked out both my e-mail addresses still not logged in. Every time I use forgot my password it says use e-mail address associated with account. No place to enter printer code. Where is the actual eprintcenter support that can reset my account?

Hello Sherry!
Did you try to login with any of the icons listed next to Sign in? If so, please try to log back in using the one when entering your email address. (Google, Facebook, Yahoo, AOL)
Please let me know if this works for you.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Linksys WRT54GL not logging for its "Incoming Log Table"?

Hello.
Is it me or does Linksys WRT54GL v1.1, with its firmware v4.30.13, not log "Incoming Log Table"? I see nothing in http://192.168.0.1/Log_incoming.asp (yes, I changed its IP address from its default 192.168.1.1). I do see logs in its outgoing though. I assume incoming log table is logging blockages and other datas.
Thank you in advance.
Solved!
Go to Solution.

Same problem in IE6, SeaMonkey v2.0.6, Firefox v3.5.11, etc. on two different computers (Windows XP Pro. SP3 and Debian/Linux). I only see:
Incoming Log Table
Source IP Destination Port Number
No IP addresses, etc. Just empty logs. I also tried power cycling the router too.

Computer recognizes camera, but does not log & capture

I teach in a classroom where we have 23 new iMACs and the new Final Cut Studio. FCP recognizes the Sony miniDV camcorders we have, but some of the computers, although they recognize the camera, will not log and capture. The new iMACs plus the loading of FCP (making an image and transferring it to all the computers) was done by the tech dept. The question: Why does FCP on most of the computers recognize cameras and log and capture, while on others it does not? It was suggested I go to a FCP users group meeting to ask the question. Does anyone out there know? Thanks.

If it's working correctly on some machines and not others, and all installs were identical, then here are a few things to try:
• First, are the FireWire cables good? Test one from a working machine on a non working one.
• Also, are they inserted securely at camera and mac ends?
• Do any of the non working macs have other firewire devices connected to other firewire ports? The iMac has only one firewire bus, even though it has multiple ports, and this can sometimes cause a problem.
• Is everything being turned on and connected in the proper order? Usually it's best to have the firewire cable connected at both ends, and the camera powered on before the mac is started up.
• Check the cameras themselves; in the camera's record in/out menu, it should be set to play out DV, and when the firewire cable is connected, most Sony cams will display a DV in/out message on the LCD screen.
• And, finally, are you using the same Easy Setup for all of the macs/cameras? I'm guessing you would want the NTSC DV setup; this should be chosen before a new project is opened to capture into; are all machines set up the same way?
Sony camcorders generally work pretty well with FCP, so I'm guessing one of the above choices will solve your problem.

[SOLVED] journald not logging

Similar Messages

Maybe you are looking for