[SOLVED]nm-applet fails to start. Cannot get network GUI on i3

Hello,
I'd like to be able to find available wireless access points and connect to them via a gui, but since I'm using i3 wm, there's no clickable icon on the bottom for such a purpose. Networkmanager and nm-applet are both started, and I do connect successfully to the internet. However, when I try to run nm-applet to get a GUI, I get the following error:
Could not initialize nm-client /org/freedesktop/NetworkManager: Rejected SendMessage....
Thanks for your help
Last edited by doubleslash (2013-03-04 15:32:30)

doubleslash wrote:
Hello,
I'd like to be able to find available wireless access points and connect to them via a gui, but since I'm using i3 wm, there's no clickable icon on the bottom for such a purpose. Networkmanager and nm-applet are both started, and I do connect successfully to the internet. However, when I try to run nm-applet to get a GUI, I get the following error:
Could not initialize nm-client /org/freedesktop/NetworkManager: Rejected SendMessage....
Thanks for your help
Possibly because you don't have a "tray." Check this Wiki entry . You can also consider tint2. I think that's what you're asking.

Similar Messages

Constly get sync error message this sync failed to start cannot up date or change music or apps

I have iphone 4, cannot syn in itunes for windows ver 11.1.3.8; get error message the iphone could not be synced because the sync session failed to start, I have uninstalled and reinstalled itunes, the ios is 7.0.4 is current on phone HELP please ???

Hi, Josemne
Yes, if you can restore the system through Rescue & Recovery, then you will still have WIndows on your machine, but all your files will be deleted from the hard drive. Luckily, you have already saved those files elsewhere. I would recommend trying to restore the system and see if that works.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Nm-applet fails to start (symbol lookup error)

I can't exactly remember what I did, but nm-applet doesn't start anymore.
This is what I get:
nm-applet: symbol lookup error: /usr/lib/libgudev-1.0.so.0: undefined symbol: g_type_class_adjust_private_offset
systemctl reports:
NetworkManager.service loaded failed failed Network Manager
I tried googling the error and got no results. The only match I got using "pacman -Ss libgudev" was systemd, and I have the lastest version installed.
What am I missing?

WonderWoofy wrote:I don't think that nm-applet is able to run unless Network Manager is actually running. You are inquiring about the wrong thing I think. First solve the problem with the service, then you can look into making the graphical component work.
Thank you for your answer.
systemctl status NetworkManager:
NetworkManager.service - Network Manager
Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled)
Active: failed (Result: exit-code) since sab 2013-11-09 23:25:43 CET; 39s ago
Process: 7863 ExecStart=/usr/bin/NetworkManager --no-daemon (code=exited, status=127)
Main PID: 7863 (code=exited, status=127)
nov 09 23:25:43 paunet systemd[1]: Starting Network Manager...
nov 09 23:25:43 paunet systemd[1]: NetworkManager.service: main process exited, code=exited, status=127/n/a
nov 09 23:25:43 paunet systemd[1]: Failed to start Network Manager.
nov 09 23:25:43 paunet systemd[1]: Unit NetworkManager.service entered failed state.
Gives no output when I try to start it. Only "Job for NetworkManager.service failed" etc.
I have no idea what the problem is.
Last edited by TheGatorade (2013-11-09 22:40:38)

[SOLVED]sensord.service fails to start

Hi there!
I made a clean Arch install a couple of days ago and I've had problems trying to get sensord to work apropriately. I've went through the troubleshooting of this particular service and googled a lot the last couple of days about this topic but I found nothing really useful (or nothing that I could really understand. Maybe my search terms are not so effective ).
# systemctl status sensord -l
[sudo] password for daniel:
● sensord.service - Log hardware monitoring data
Loaded: loaded (/usr/lib/systemd/system/sensord.service; enabled)
Active: failed (Result: exit-code) since mié 2014-09-03 09:14:04 CLT; 7min ago
Process: 4231 ExecStart=/usr/sbin/sensord -i $INTERVAL -l $LOG_INTERVAL -f daemon (code=exited, status=127)
sep 03 09:14:04 Ophiel sensord[4231]: /usr/sbin/sensord: error while loading shared libraries: librrd.so.4: cannot open shared object file: No such file or directory
sep 03 09:14:04 Ophiel systemd[1]: sensord.service: control process exited, code=exited status=127
sep 03 09:14:04 Ophiel systemd[1]: Failed to start Log hardware monitoring data.
sep 03 09:14:04 Ophiel systemd[1]: Unit sensord.service entered failed state.
This is just a minor annoyance. My system performs great and I have no issues with it. It just annoys the heck out of me to see a service failing in my start up screen.
I don't know if hardware specs or other logs are useful. But if you need more info, just let me know
Thanks in advance.
Last edited by Silex89 (2014-09-03 14:16:15)

Silex89 wrote:My system performs great and I have no issues with it
Hmmm ...
Silex89 wrote:This thread is SOLVED.
Really ? Maybe there are services working but unrequested, have a look here:
https://bbs.archlinux.org/viewtopic.php?id=186244
I thought, that you explicitly installed sensord. Do you need a round robin database to visualize graphically your measured values in Nagios e.g. ?
Last edited by midixinga (2014-09-03 18:06:06)

[SOLVED] apache daemon fails to start on boot, but rc.d restart works?

I installed apache from the official repos and followed the instructions in the wiki for configuring it. I checked to make sure the http user exists, and I /etc/hosts looks good (to me). Upon boot, the daemon fails to start and I can't load local web pages, but running "rc.d restart httpd" works just fine. Since I'd rather not start it manually every time I boot, is there a way to fix this? Also, httpd is the last daemon in my DAEMONS array.
/etc/httpd/conf/httpd.conf:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 127.0.0.1:80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
#php
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#PHP
Include conf/extra/php5_module.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
/etc/hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost laptop
::1 localhost.localdomain localhost
# End of file
Per the wiki, I also tried commenting out the line that reads
LoadModule unique_id_module modules/mod_unique_id.so
Either way, it still fails on boot.
Last edited by pythonscript (2012-06-10 21:14:44)

The SIGTERM are from reboots, yes. I'm not absolutely sure that the process isn't running; I just know that I can't access http://localhost immediately upon reboot. I have to restart the httpd daemon, which works fine. How would I be able to tell if it's just hung?
I checked everything.log, and I don't see anything that leaps off the page to me.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Successfully made thread 1930 of process 1908 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Supervising 2 threads of 1 processes of 1 users.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Successfully made thread 1931 of process 1908 (/usr/bin/pulseaudio) owned by '120' RT at priority 5.
Jun 9 22:29:30 localhost rtkit-daemon[1910]: Supervising 3 threads of 1 processes of 1 users.
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: RegisterClient 106d33cade29b1ba713392593689729000000018320001
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: Adding new client 106d33cade29b1ba713392593689729000000018320001 to session
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): uid = 120
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): pid = 1842
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): App gnome-settings-daemon.desktop registered
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase INITIALIZATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase PANEL
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase PANEL
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase DESKTOP
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase DESKTOP
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase APPLICATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=106d33cade29b1ba713392593689681600000018320000
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmAutostartApp: started pid:1936
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase APPLICATION
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase RUNNING
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmPresence: adding idle watch
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:30 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:31 localhost kernel: [ 29.003352] wlan0: no IPv6 routers present
Jun 9 17:29:31 localhost NetworkManager[765]: <warn> could not commit DNS changes: (0) Could not replace /etc/resolv.conf: Operation not permitted
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS.
Jun 9 17:29:31 localhost NetworkManager[765]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0]
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Activation (wlan0) successful, device activated.
Jun 9 17:29:31 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 5 of 5 (IPv4 Commit) complete.
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Setting up new connection
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: New client '0x7f9ff0004e60 []'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Initializing client 0x7f9ff0004e60 []
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 []' received RegisterClient(106d33cade29b1ba713392593689681600000018320000)
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmManager: Adding new client 106d33cade29b1ba713392593689681600000018320000 to session
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0x7f9ff0004e60 [106d33cade29b1ba713392593689681600000018320000]'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Set properties from client '0x7f9ff0004e60 [106d33cade29b1ba713392593689681600000018320000]'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: ProcessID = '1936'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
Jun 9 17:29:31 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
Jun 9 17:29:31 localhost dhcpcd[1640]: eth0: sending IPv6 Router Solicitation
Jun 9 17:29:31 localhost dhcpcd[1640]: eth0: no IPv6 Routers available
Jun 9 17:29:33 localhost dhcpcd[1677]: wlan0: sending IPv6 Router Solicitation
Jun 9 17:29:33 localhost dhcpcd[1677]: wlan0: no IPv6 Routers available
Jun 9 17:29:33 localhost NetworkManager[765]: <warn> error monitoring device for netlink events: error processing netlink message: Object busy
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:34 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Jun 9 17:29:35 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:35 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:40 localhost NetworkManager[765]: <info> (eth0): IP6 addrconf timed out or failed.
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jun 9 17:29:40 localhost NetworkManager[765]: <info> Activation (eth0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jun 9 17:29:41 localhost NetworkManager[765]: <info> (wlan0): IP6 addrconf timed out or failed.
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jun 9 17:29:41 localhost NetworkManager[765]: <info> Activation (wlan0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: handling signal 15
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Got callback for signal 15
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Logout called
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: requesting logout
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase RUNNING
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Caught signal 15, shutting down normally.
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GdmSignalHandler: Done handling signals
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received SaveYourselfDone(success = True)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: sms_error_handler (0x1491c70, FALSE, 3, 9, 32771, 0)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: query end session complete
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmShell: Connected to the shell
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received SaveYourselfDone(success = True)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXsmpServer: sms_error_handler (0x1491c70, FALSE, 3, c, 32771, 0)
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: unable to find application for client - not restarting
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1428a40
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase END_SESSION
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Using ConsoleKit for session tracking
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: starting phase EXIT
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]')
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: Client '0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000]' received CloseConnection
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: in shutdown, not restarting application
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x7f9ff0004e60
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0x7f9ff0004e60 [gnome-shell 106d33cade29b1ba713392593689681600000018320000])
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: in shutdown, not restarting application
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1428ac0
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: last client disconnected - exiting
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: ending phase EXIT
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): Unreffing manager
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmManager: disposing manager
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1473070
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Unreffing object: 0x1473150
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gnome-session[1832]: DEBUG(+): GsmStore: Clearing object store
Jun 9 17:29:42 localhost gdm-simple-slave[1728]: WARNING: Child process 1832 was already dead.
Jun 9 17:29:43 localhost gnome-session[1970]: EggSMClient-WARNING: Desktop file '/home/ak5791/.config/autostart/dropbox.desktop' has malformed Icon key 'dropbox.png'(should not include extension)
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2022 of process 2022 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 4 threads of 2 processes of 2 users.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2023 of process 2022 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 5 threads of 2 processes of 2 users.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Successfully made thread 2024 of process 2022 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 9 22:29:43 localhost rtkit-daemon[1910]: Supervising 6 threads of 2 processes of 2 users.
Jun 9 17:29:44 localhost dbus[739]: [system] Activating service name='org.freedesktop.ColorManager' (using servicehelper)
Jun 9 17:29:44 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Jun 9 17:29:44 localhost dbus[739]: [system] Activating service name='org.freedesktop.colord-sane' (using servicehelper)
Jun 9 17:29:45 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.colord-sane'
Jun 9 22:29:46 localhost rtkit-daemon[1910]: Successfully made thread 2079 of process 2079 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 9 22:29:46 localhost rtkit-daemon[1910]: Supervising 7 threads of 3 processes of 2 users.
Jun 9 17:29:46 localhost pulseaudio[2079]: [pulseaudio] pid.c: Daemon already running.
Jun 9 17:29:48 localhost dbus[739]: [system] Activating service name='org.freedesktop.UDisks2' (using servicehelper)
Jun 9 17:29:48 localhost udisksd[2110]: udisks daemon version 1.94.0 starting
Jun 9 17:29:48 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jun 9 17:29:48 localhost udisksd[2110]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jun 9 17:29:48 localhost kernel: [ 46.319778] gnome-shell-cal[2103] trap int3 ip:7ff3f55b85e1 sp:7fff94941890 error:0
Jun 9 17:30:19 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:40:53 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:47:15 localhost kernel: [ 1092.983585] usb 8-1.4.1: new high-speed USB device number 8 using ehci_hcd
Jun 9 22:47:15 localhost mtp-probe: checking bus 8, device 8: "/sys/devices/pci0000:00/0000:00:1d.7/usb8/8-1/8-1.4/8-1.4.1"
Jun 9 22:47:15 localhost mtp-probe: bus: 8, device: 8 was not an MTP device
Jun 9 22:47:15 localhost kernel: [ 1093.132002] usbcore: registered new interface driver uas
Jun 9 22:47:15 localhost kernel: [ 1093.135601] Initializing USB Mass Storage driver...
Jun 9 22:47:15 localhost kernel: [ 1093.135785] scsi6 : usb-storage 8-1.4.1:1.0
Jun 9 22:47:15 localhost kernel: [ 1093.135905] usbcore: registered new interface driver usb-storage
Jun 9 22:47:15 localhost kernel: [ 1093.135913] USB Mass Storage support registered.
Jun 9 22:47:16 localhost kernel: [ 1094.137579] scsi 6:0:0:0: Direct-Access Kingston DT 101 G2 1.00 PQ: 0 ANSI: 2
Jun 9 22:47:16 localhost kernel: [ 1094.140133] sd 6:0:0:0: [sdb] 15636304 512-byte logical blocks: (8.00 GB/7.45 GiB)
Jun 9 22:47:16 localhost kernel: [ 1094.140631] sd 6:0:0:0: [sdb] Write Protect is off
Jun 9 22:47:16 localhost kernel: [ 1094.140634] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
Jun 9 22:47:16 localhost kernel: [ 1094.141128] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.141132] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.144916] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.144921] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.146680] sdb: sdb1
Jun 9 22:47:16 localhost kernel: [ 1094.151407] sd 6:0:0:0: [sdb] No Caching mode page present
Jun 9 22:47:16 localhost kernel: [ 1094.151411] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Jun 9 22:47:16 localhost kernel: [ 1094.151414] sd 6:0:0:0: [sdb] Attached SCSI removable disk
Jun 9 22:47:17 localhost ntfs-3g[2636]: Version 2012.1.15 external FUSE 29
Jun 9 22:47:17 localhost ntfs-3g[2636]: Mounted /dev/sdb1 (Read-Write, label "kingstonGB", NTFS 3.1)
Jun 9 22:47:17 localhost ntfs-3g[2636]: Cmdline options: rw,nodev,nosuid,uid=1000,gid=100,dmask=0077,fmask=0177,uhelper=udisks2
Jun 9 22:47:17 localhost ntfs-3g[2636]: Mount options: rw,nodev,nosuid,uhelper=udisks2,allow_other,nonempty,relatime,fsname=/dev/sdb1,blkdev,blksize=4096,default_permissions
Jun 9 22:47:17 localhost ntfs-3g[2636]: Global ownership and permissions enforced, configuration type 7
Jun 9 22:47:17 localhost udisksd[2110]: Mounted /dev/sdb1 at /run/media/ak5791/kingstonGB on behalf of uid 1000
Jun 9 22:47:28 localhost dbus[739]: [system] Activating service name='org.freedesktop.UDisks' (using servicehelper)
Jun 9 22:47:28 localhost dbus[739]: [system] Successfully activated service 'org.freedesktop.UDisks'
Jun 9 22:47:46 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 22:57:59 localhost dbus[739]: [system] Failed to activate service 'org.freedesktop.Avahi': timed out
Jun 9 23:01:02 localhost /USR/SBIN/CROND[5529]: (root) CMD (run-parts /etc/cron.hourly)
Jun 9 23:21:02 localhost -- MARK --
All I notice is that my system's time is having a few problems, since you'll notice that events occur at 22:00 and change, then 17:00 and change, then back to 22:00 and change afterwards. Could this be the problem? I've had the CMOS batteries peg out on me suddenly in the last few weeks. I would hope this sytem is not also suffering a similar fate. Nothing else was happening on my system except for the standard processes from /etc/rc.conf and other standard ones, since I've just been rebooting, checking the logs, then posting here.

[SOLVED] Crashplan Engine fails to start

Crashplan Engine fails to start. Here is the status output from systemctl.
[steve@scwalla ~]$ systemctl status crashplan.service
● crashplan.service - CrashPlan Backup Engine
Loaded: loaded (/usr/lib/systemd/system/crashplan.service; enabled)
Active: failed (Result: exit-code) since Thu 2014-09-11 10:12:01 EDT; 30min ago
Process: 581 ExecStop=/opt/crashplan/bin/CrashPlanEngine stop (code=exited, status=0/SUCCESS)
Process: 545 ExecStart=/opt/crashplan/bin/CrashPlanEngine start (code=exited, status=0/SUCCESS)
Main PID: 574 (code=exited, status=126)
Sep 11 10:11:51 scwalla systemd[1]: Starting CrashPlan Backup Engine...
Sep 11 10:11:51 scwalla systemd[1]: Started CrashPlan Backup Engine.
Sep 11 10:11:51 scwalla systemd[1]: crashplan.service: main process exited, code=exited, status=126/n/a
Sep 11 10:11:51 scwalla CrashPlanEngine[545]: /opt/crashplan/bin/CrashPlanEngine: line 110: warning: setlocale: LC_ALL: cannot change locale (C.UTF-8): No such file or directory
Sep 11 10:11:51 scwalla CrashPlanEngine[545]: Starting CrashPlan Engine ... Using standard startup
Sep 11 10:11:51 scwalla CrashPlanEngine[545]: OK
Sep 11 10:11:51 scwalla CrashPlanEngine[581]: /opt/crashplan/bin/CrashPlanEngine: line 110: warning: setlocale: LC_ALL: cannot change locale (C.UTF-8): No such file or directory
Sep 11 10:11:51 scwalla CrashPlanEngine[581]: Stopping CrashPlan Engine ... /opt/crashplan/bin/CrashPlanEngine: line 144: kill: (574) - No such process
Sep 11 10:12:01 scwalla CrashPlanEngine[581]: OK
Sep 11 10:12:01 scwalla systemd[1]: Unit crashplan.service entered failed state.
I see the following error in /opt/crashplan/log/engine_error.log.
[steve@scwalla log]$ cat engine_error.log
/usr/bin/java: line 2: /usr/lib/jvm/default/bin/java: Too many levels of symbolic links
/usr/bin/java: line 2: exec: /usr/lib/jvm/default/bin/java: cannot execute: Too many levels of symbolic links
Can anyone help with this please?
Last edited by scwalla (2014-09-11 21:52:24)

Thanks, firecat53.
I found a thread here: https://bbs.archlinux.org/viewtopic.php?id=186640 that has the solution I used to solve this.
$ archlinux-java fix

[SOLVED]nm-applet fails to launch after update

Hi,
I've just updated NetworkManager and network-manager-applet:
[2012-10-31 20:16] upgraded networkmanager (0.9.6.0-2 -> 0.9.6.4-1)
[2012-10-31 20:16] upgraded network-manager-applet (0.9.6.2-1 -> 0.9.6.4-1)
After reboot nm-applet fails to launch with the following error:
** (nm-applet:6657): WARNING **: Could not initialize NMClient /org/freedesktop/NetworkManager: Rejected send message, 2 matched rules; type="method_call", sender=":1.48" (uid=1000 pid=6657 comm="nm-applet ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination="org.freedesktop.NetworkManager" (uid=0 pid=267 comm="/usr/sbin/NetworkManager --no-daemon ")
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
** Message: applet now removed from the notification area
** (nm-applet:6657): WARNING **: Failed to register as an agent: (32) Session not found
When using sudo nm-applet:
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
** (nm-applet:6767): WARNING **: Failed to register as an agent: (32) Session not found
Any idea on what went wrong after the update?
Thank you in advance!
EDIT:
While migrating to systemd, I forgot to replace the ConsoleKit line in /etc/pam.d/slim with:
session required pam_systemd.so
->Problem solved
Last edited by geekmiki (2012-11-01 00:53:29)

Related news: https://www.archlinux.org/news/consolek … by-logind/

[SOLVED] systemd : services failing to start on boot

I have removed sysvinit completely as per the systemd wiki pages.
I don't usually re-boot very often so I'm not sure exactly when the problem started.
I only noticed this problem about 4 or 5 days ago.
But now whenever I reboot my machine 2 services fail consistently.
adsl.service
colord.service
They both start flawlessly once I can log in at a console.
I'm using kde and in the last couple of days, while trying to fix my problem, the kdm service has failed to start a couple of times too - saying there is no X server.
Before switching to systemd I never had any of these problems using the old rc.conf method. My DAEMONS array had the adsl service start after the network service.
I need some help and advice to find out what is causing the problem and how to fix it.
Last edited by bhrgunatha (2012-10-25 05:44:22)

Thanks. That seems plausible. So I've been snooping at the journal.
journalctl -ab
Oct 25 17:06:13 starch systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.
Oct 25 17:06:14 starch systemd[1]: Started Recreate Volatile Files and Directories.
Oct 25 17:06:14 starch systemd[1]: Starting System Initialization.
Oct 25 17:06:14 starch systemd[1]: Reached target System Initialization.
Oct 25 17:06:14 starch systemd[1]: Starting CUPS Printing Service Sockets.
Oct 25 17:06:14 starch systemd[1]: Listening on CUPS Printing Service Sockets.
Oct 25 17:06:14 starch systemd[1]: Starting Console System Startup Logging...
Oct 25 17:06:14 starch systemd[1]: Starting Restore Sound Card State...
Oct 25 17:06:14 starch systemd[1]: Starting CUPS Printer Service Spool.
Oct 25 17:06:14 starch systemd[1]: Started CUPS Printer Service Spool.
Oct 25 17:06:14 starch systemd[1]: Starting D-Bus System Message Bus Socket.
Oct 25 17:06:16 starch ntpd[381]: ntpd [email protected] Tue Aug 21 15:06:24 UTC 2012 (1)
Oct 25 17:06:16 starch ntpd[413]: proto: precision = 0.156 usec
Oct 25 17:06:17 starch ntpd[413]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Oct 25 17:06:17 starch ntpd[413]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Oct 25 17:06:18 starch ntpd[413]: Listen and drop on 1 v6wildcard :: UDP 123
Oct 25 17:06:18 starch ntpd[413]: Listen normally on 2 lo 127.0.0.1 UDP 123
Oct 25 17:06:18 starch ntpd[413]: Listen normally on 3 lo ::1 UDP 123
Oct 25 17:06:18 starch ntpd[413]: peers refreshed
Oct 25 17:06:18 starch ntpd[413]: Listening on routing socket on fd #20 for interface updates
Oct 25 17:06:18 starch dbus[384]: [system] Activating systemd to hand-off: service name='org.freedesktop.ColorManager' unit='colord.service'
Oct 25 17:06:18 starch dbus[384]: [system] Successfully activated service 'org.freedesktop.systemd1'
Oct 25 17:07:03 starch dbus[384]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Oct 25 17:07:03 starch dbus[384]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Oct 25 17:07:03 starch dbus[384]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Oct 25 17:07:04 starch kernel: r8169 0000:02:00.0: eth0: link down
Oct 25 17:07:03 starch systemd[1]: Starting Manage, Install and Generate Color Profiles...
Oct 25 17:07:03 starch systemd[1]: Started Manage, Install and Generate Color Profiles.
Oct 25 17:07:03 starch systemd[1]: colord.service: main process exited, code=killed, status=6
Oct 25 17:07:03 starch systemd[1]: Unit colord.service entered failed state.
Oct 25 17:07:04 starch kernel: r8169 0000:02:00.0: eth0: link down
Oct 25 17:07:04 starch kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Oct 25 17:07:04 starch kernel: PPP generic driver version 2.4.2
Oct 25 17:07:04 starch cupsd[380]: Unknown directive DefaultAuthType on line 26.
Oct 25 17:07:04 starch kernel: r8169 0000:02:00.0: eth0: link up
Oct 25 17:07:04 starch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Oct 25 17:07:04 starch pppoe-start[382]: TIMED OUT
Oct 25 17:07:04 starch kernel: NET: Registered protocol family 24
Oct 25 17:07:04 starch pppoe-start[382]: /usr/sbin/pppoe-start: line 193: 394 Terminated $CONNECT "$@" > /dev/null 2>&1
That seems to confirm your theory.
eth0 link is not up when attempting to start colord and adsl
So the $64,000 question:
How do I defer them until eth0 is ready?
Or how can I force the eth0 link to be up before colord or adsl try to use it?
Last edited by bhrgunatha (2012-10-25 01:33:36)

HT201320 always server failed and i cannot get mail

everytime i open my email with my iphone, it says cannot get mail, connection to the server failed

Who is the email provider? Have to tried to find out from them what settings you need to set up their email account on a mobile device?

Ix2 fails to respond, cannot get past login screen

I am having intermittent problems with my Iomega ix2 failing to respond. After some time being on the drive fails to respond. I cannot open any files through Windows explorer. If i attempt to connect using the web interface i cant get past the login screen. I put in my user name and password and hit enter. The page simply reloads the login screen. The only solution is to power the drive down using the button on the back of the unit. Powering it up it works fine. Eventually though this will happen again. It's happened a half dozen time or more in the last few days. Now I'm stuck out in the field and cannot access any files. Please help.

No. No errors in the event log of any kind other than the time sync error. I recently replaced one of the disks as it had failed. I receieved a warranty disk from Lenovo/Iomega about a month ago. i installed it and it rebuilt the RAID with no problems. This error has been happening since then. When the time sync error happens i get all kinds of strange behavior. SFTP, which is how I access the files, will start giving Goodsync 'cannt reach end of file error' type errors. Like I've mentioned before I also get an issue where the web login screen gets caught in a loop too. I type in the user name and the password, hit enter, and it just reloads the login screen again. Rebooting the device from the power button on the back is the only solution.

[Solved] mpd.service fails to start

hello, i've switched to arch recently,
love it so far.
I've been trying to start mpd, with no success :
systemctl status mpd.service
mpd.service - Music Player Daemon
Loaded: loaded (/usr/lib/systemd/system/mpd.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since Sat 2015-02-21 12:52:02 CET; 3s ago
Process: 1924 ExecStart=/usr/bin/mpd --no-daemon (code=exited, status=1/FAILURE)
Main PID: 1924 (code=exited, status=1/FAILURE)
I cant really see what goes wrong, I get no error message on "systemctl start mpd.service", and I dont see anything in "journalctl" :
Feb 21 12:30:42 SGC cantata[1694]: libpng warning: iCCP: known incorrect sRGB profile
Feb 21 12:30:42 SGC cantata[1694]: libpng warning: iCCP: known incorrect sRGB profile
Feb 21 12:30:42 SGC cantata[1694]: QStringList Solid::Backends::UDisks::UDisksManager::allDevicesInternal() error: "org.freedesktop.DBus.Error.ServiceUnknown"
Feb 21 12:35:01 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:35:01 SGC baloo_file[507]: Normal
Feb 21 12:35:44 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:35:44 SGC baloo_file[507]: Normal
Feb 21 12:36:50 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:36:50 SGC baloo_file[507]: Normal
Feb 21 12:39:45 SGC konsole[659]: org.kde.kurlfilter-ikws: "d2a291c6bf4fad8aaf7442433364ab6bfb2eecd969885543bfd1e4071db8633b"
Feb 21 12:40:26 SGC konsole[659]: org.kde.kurlfilter-ikws: "d2a291c6bf4fad8aaf7442433364ab6bfb2eecd969885543bfd1e4071db8633b"
Feb 21 12:42:48 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:42:48 SGC baloo_file[507]: Normal
Feb 21 12:43:43 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:43:43 SGC baloo_file[507]: Normal
Feb 21 12:43:52 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:43:52 SGC baloo_file[507]: Normal
Feb 21 12:45:45 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:45:45 SGC baloo_file[507]: Normal
Feb 21 12:45:48 SGC konsole[659]: org.kde.kurlfilter-ikws: "systemctl status mpd.service ● mpd.service - Music Player Daemon Loaded: loaded (/usr/lib/systemd/system/mpd.serv
Feb 21 12:45:56 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:45:56 SGC baloo_file[507]: Normal
Feb 21 12:46:07 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:46:07 SGC baloo_file[507]: Normal
Feb 21 12:48:52 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:48:52 SGC baloo_file[507]: Normal
Feb 21 12:49:07 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:49:07 SGC baloo_file[507]: Normal
Feb 21 12:49:40 SGC konsole[659]: org.kde.kurlfilter-ikws: "Feb 21 12:45:56 SGC baloo_file[507]: Normal Feb 21 12:46:07 SGC baloo_file[507]: "/home/demo/.xsession-errors" Fe
Feb 21 12:49:44 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:49:44 SGC baloo_file[507]: Normal
Feb 21 12:50:04 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:50:04 SGC baloo_file[507]: Normal
Feb 21 12:50:28 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:50:28 SGC baloo_file[507]: Normal
Feb 21 12:51:00 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:51:00 SGC baloo_file[507]: Normal
Feb 21 12:53:49 SGC konsole[659]: org.kde.kurlfilter-ikws: "Feb 21 12:14:12 SGC kded5[480]: kf5.kservice.sycoca: Trying to open ksycoca from "/home/demo/.cache/ksycoca5" Feb
Feb 21 12:54:03 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:54:03 SGC baloo_file[507]: Normal
Feb 21 12:54:56 SGC konsole[659]: org.kde.kurlfilter-ikws: "systemctl status mpd.service ● mpd.service - Music Player Daemon Loaded: loaded (/usr/lib/systemd/system/mpd.serv
Feb 21 12:55:01 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:55:01 SGC baloo_file[507]: Normal
Feb 21 12:55:17 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:55:17 SGC baloo_file[507]: Normal
Feb 21 12:55:36 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:55:36 SGC baloo_file[507]: Normal
Feb 21 12:55:48 SGC baloo_file[507]: "/home/demo/.xsession-errors"
Feb 21 12:55:48 SGC baloo_file[507]: Normal
Here's my /etc/mpd.conf :
# See: /usr/share/doc/mpd/mpdconf.example
music_directory "~/Music"
playlist_directory "~/.mpd/playlists"
db_file "~/.mpd/mpd.db"
log_file "~/.mpd/mpd.log"
pid_file "~/.mpd/mpd.pid"
state_file "~/.mpd/mpdstate"
bind_to_address "127.0.0.1"
port "6600"
audio_output {
type "alsa"
name "Output"
#pid_file "/run/mpd/mpd.pid"
#db_file "/var/lib/mpd/mpd.db"
#state_file "/var/lib/mpd/mpdstate"
#playlist_directory "/var/lib/mpd/playlists"
Thanks in advance,
Last edited by demo (2015-02-21 13:14:00)

Raynman wrote:
Spider.007 wrote:Mpd runs as a system service
In this case the system service is indeed the one that failed, but mpd also provides a user service file and all the paths in demo's /etc/mpd.conf (even though that is the default config for the system service) seem to indicate a user service might be more appropriate.
Indeed, I've made the appropriate change to run it as user service
(put my mdp.conf in ~/.mpd, and add "mpd ~/.mpd/mpd.conf" to my home ".profile")
Last edited by demo (2015-02-21 13:13:41)

[SOLVED] Net install fails at starting mkinitcpio

trying to do net install today and during the install after you do the configurations i get the following message:
STARTING MKINITCPIO , Executing chroot /mnt /sbin/mkinitcpio -p linux >>/var/log/aif/mkinitcpio.log 2>&1\n
chroot: failed to run command '/sbin/mkinicpio' : No such file or directory.
This happens every time since 4/12, i've tried on 2 machines, one intell, one amd, and i've tried using different mirrors for net install.
going to try local core install and see what that gets me.
Last edited by Mert7 (2012-04-13 08:35:12)

zebulon wrote:
Alternatively, after installing the base packages (between step 6 and step 7), you can switch to another console, login as root and do:
cd /mnt/sbin
ln -s ../usr/bin/mkinitcpio .
ok just to be clear, i tend to take cli instruction verbatim, so when i did it, that last dot, made it not work, it just turned up what i said in original post, so i had to do it again.
# cd /mnt/sbin
# ln -s ../usr/bin/mkinitcpio
no errors ^_^
so now i'll move on to my gui but i think every is nice now.

Cannot get Network Manager to start

I was using netcfg but I really wanted to switch to something that had a GUI. I am running kdemod (kde4) and networkmanager came with the install but it will not start... am I Missing something, i click it in the menu and it does absolutely nothing.... i have no idea where to go with this one.

JoeKer1086 wrote:I was using netcfg but I really wanted to switch to something that had a GUI. I am running kdemod (kde4) and networkmanager came with the install but it will not start... am I Missing something, i click it in the menu and it does absolutely nothing.... i have no idea where to go with this one.
I presume you read this?
http://wiki.archlinux.org/index.php/Networkmanager#KDE4
I just installed this recently and am using nm flawlessly on my desktop. I just followed the wiki.
After installing the applet (pacman -S kdeplasma-applets-networkmanager) as it said in the wiki I was able to merely right click on it to get a menu to set up everything. I'm using the standard KDE4 though.
I'm guessing you might have this one installed since you state kdemod?
There is new version of KNetworkManager in [kdemod-core] providing system tray icon and configuration:
# pacman -S kdemod-networkmanagement-knetworkmanager-kde4

Java Applet fails to start, but Java is installed correctly

Hello,
I have tried everything to get Java functioning in our IT rooms, different versions, permissions, etc.
But to no avail, we are behind a DMZ and a Proxy Server. This only occours when logged in as a student (differnt proxy server, with filtering) but the internet still funtions.
This is the error I recieve: (when performing the "Have I got Java" test on this website).
load: class testvm.class not found.
java.lang.ClassNotFoundException: testvm.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception in thread "Thread-37" java.lang.NullPointerException
     at sun.plugin.util.AnimationPanel.createTranslucentImage(Unknown Source)
     at sun.plugin.util.AnimationPanel.createGradientShapeImage(Unknown Source)
     at sun.plugin.util.AnimationPanel.initBackground(Unknown Source)
     at sun.plugin.util.AnimationPanel.preloadResources(Unknown Source)
     at sun.plugin.util.AnimationPanel.doPaint(Unknown Source)
     at sun.plugin.util.AnimationPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Any help would be appriciated!
Regards,
Alex.

Applet for my project play very important roll because it does what other technology can not or very hard , the applet I developed is about 6MB in size it control a remote observatory completely with server side java program consist of web server and JSP engine and ftp server plus code to control hardware through COM drivers and many things without java technology it is very hard to do the same development in reasonable time and resources , the applet I developed has a dynamic integrated planetarium with thousands of deep sky objects observers can zoom in and out and search for object can slew telescope to any object in the sky just with mouse click and they can do observation planning and take images of deep sky object plus ftp all in one applet and it is dynamic let observer feel he is in real time observatory control I tried before the HTML 5 but no thing to compare if applet run correctly and it does under windows , OK I was little frustrating because maybe some BUGs but I have to remember many peoples working hard to bring us all these features of Java and I think Java is offer me as developer a great technology and let me offer my customers very good service.

[Solved] kdm.service fails to start X with systemd 185-4

Hello
After updating systemd yesterday to 185-4 and booting my pc in the morning I found out that either the boot stops in the middle giving me just black screen or it would throw me to console prompt after some time.
systemctl status kdm.service shows two errors
Jul 1 11:20:57 pc kdm[285]: X server startup timeout, terminating
Jul 1 11:21:08 pc kdm[285]: X server for display :0 cannot be started, session disabled
The same can be observed in logs. However, there are no errors in Xorg.0.log.
Moreover when I do
systemctl stop kdm.service
systemctl start kdm.service
kdm loads fine and I can login to kde.
I have temporarily reverted to 185-3 and the problem seems to be gone.
Does anybody experience a similar issue?
thanks
Last edited by aya (2012-07-02 14:05:53)

~ $ ls -l /etc/systemd/system/graphical.target.wants/kdm.service
lrwxrwxrwx 1 root root 35 мая 31 20:33 /etc/systemd/system/graphical.target.wants/kdm.service -> /usr/lib/systemd/system/kdm.service
~ $ cat /usr/lib/systemd/system/kdm.service
cat: /usr/lib/systemd/system/kdm.service: No such file or directory.
Also read - https://projects.archlinux.org/svntogit … 833ee7a0c8

[SOLVED]nm-applet fails to start. Cannot get network GUI on i3

Similar Messages

Maybe you are looking for