[solved] Obmenu do not apply my changes

Hello
I'm working on a config based on Openbox.
I use Obmenu, I edit the menu.xml with it.
I added "Lxtask" with "lxtask" in the execute field, after that I've done the same thing for Chromium "Chromium" with "chromium" in the execute field but It did not worked.
I saved my changes, I've even made "Openbox Reconfigure", I retry three or four times, but it did not work
The entry "Chromium" is visible, but when i click on it, it did not do anything
I've started obmenu again, and nothing appears in the field "execute"
Could someone help me ?
Thanks
Last edited by Lowra (2010-06-05 13:48:08)

stryder wrote:Don't reuse the entries that were originally in obmenu by editing them. Create new entries instead. Worked for me.
It seems to work now
Thank you

Similar Messages

  • Windows Theme not applied after changing OS language

    Hi,
        I have a theme(.theme file) which I have created and applied on my system. However after I change the language from "Control Panel > Region and Language" setting, my theme which was applied goes away. I tried retaining the theme
    by Enabling below settings in Group Policy but was of no help.
    - Prevent Changing Theme
    -Prevent Changing Window Color and Appearance
         Does anyone know the solution to this? Any help would be appreciated.
    Thanks,
    Rommel;

    Hi,
    For the deny error message, it would be better to use Process Monitor to capture the trace and it would record the deny message when you encounter the error.
    Process Monitor:
    http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
    If there is any difficult to use Process Monitor,please feel free let me know.
    In addition, I'm not suggest you use 3rd theame in Windows 7, it's probably infect system stability with a lot of unknown problem.
    Roger Lu
    TechNet Community Support

  • Saved Selections not applying hierarchy change in dimension

    I am using Oracle BI Discoverer 10.1.2.54.25. I have created Saved Selections and am trying to have 3 saved selections for a certain dimension in my report. I want each saved selection to apply a different hierarchy within that dimension, but when I do a replace to apply the new saved selection in the report, it looks like its working, but it does not change the hierarchy - it looks like it always uses the default. I do select the hierarchy I want in the saved selection definition. Can anyone help?
    Thank you!
    Ann

    You should post your question to [disco forum|http://forums.oracle.com/forums/forum.jspa?forumID=56&start=0].
    I noticed that I cannot include the saved selection created for other hierarchies than default.
    Thanks
    Brijesh

  • ASDM not applying config changes

    Hi
    I am running version 9.1(1) and ASDM 7.3.1 as Cisco recommended.
    It looks like the creating of objects or something similar doesn't get applied. I don't see any progress bar window which generally says applying your config changes. So after a while when u want to save , it will ask you haven't applied. Then again when u say apply, it just doesn't do anything.
    Has anyone seen this issue before.
    Regards
    Mohit
    Sent from Cisco Technical Support iPad App

    it is 6. I tried using 7 but that completely stuffed the ASDM. I couldnt even open ASDM at all fromt that version. So i rolled back to 6 but still the same issue where i cannot apply after making major changes.
    i can make minor rules addition deletion but trying to create objects never helped me so far.
    i was thinking of downgrading the asdm version to 7.1.1 which is the min required for this IOS 9.1 (1), any suggestions??

  • Sysprep unattend file not applying when image is captured with wds (no errors)

    So I've been around the block a bit using sysprep and wds.  Recently I've created a reference image with a virtualbox environment using windows 7 x64. I was succesfully able to create a reference image, sysprep it and capture it to the wds server. My
    plan there after was to create driver specific images for each model computer we use here after not having much success using the driver store (another story)
    Any how So I take my reference image and deploy it to a new computer... In this case an HP Probook 5310m.  Install any missing drivers and Sysprep it with the following command.  sysprep /generalize /oobe /unattend:unattend.xml /shutdown
    Below is the sysprep file I have been using
    <?xml version="1.0" encoding="utf-8"?>
    <unattend xmlns="urn:schemas-microsoft-com:unattend">
        <settings pass="generalize">
            <component name="Microsoft-Windows-Security-SPP" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <SkipRearm>0</SkipRearm>
            </component>
            <component name="Microsoft-Windows-PnpSysprep" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <DoNotCleanUpNonPresentDevices>true</DoNotCleanUpNonPresentDevices>
                <PersistAllDeviceInstalls>true</PersistAllDeviceInstalls>
            </component>
        </settings>
        <settings pass="specialize">
            <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <SkipAutoActivation>true</SkipAutoActivation>
            </component>
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <ShowWindowsLive>false</ShowWindowsLive>
                <TimeZone>Eastern Standard Time</TimeZone>
                <CopyProfile>true</CopyProfile>
                <ProductKey>74fdj-7dtw8-q9mp9-ypth8-qb27y</ProductKey>
            </component>
        </settings>
        <settings pass="oobeSystem">
            <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <OEMInformation>
                    <Logo>c:\windows\system32\oemlogo.bmp</Logo>
                    <SupportHours>Regular Business Hrs (Overnight Support Provided)</SupportHours>
                    <SupportURL>url</SupportURL>
                    <SupportPhone>Phone number</SupportPhone>
                </OEMInformation>
                <OOBE>
                    <HideEULAPage>true</HideEULAPage>
                    <NetworkLocation>Work</NetworkLocation>
                    <ProtectYourPC>1</ProtectYourPC>
                    <HideWirelessSetupInOOBE>false</HideWirelessSetupInOOBE>
                </OOBE>
                <UserAccounts>
                    <LocalAccounts>
                        <LocalAccount wcm:action="add">
                            <Password>
                                <Value>TAAxAEQAMwBzAHQAcgBpACEAUABhAHMAcwB3AG8AcgBkAA==</Value>
                                <PlainText>false</PlainText>
                            </Password>
                            <Description>Local Administrator</Description>
                            <DisplayName>Root</DisplayName>
                            <Group>Administrators</Group>
                            <Name>Root</Name>
                        </LocalAccount>
                    </LocalAccounts>
                </UserAccounts>
                <TimeZone>Eastern Standard Time</TimeZone>
                <ShowWindowsLive>false</ShowWindowsLive>
                <FirstLogonCommands>
                    <SynchronousCommand wcm:action="add">
                        <Order>1</Order>
                        <CommandLine>slmgr.vbs /ipk {serial key}</CommandLine>
                    </SynchronousCommand>
                    <SynchronousCommand wcm:action="add">
                        <Order>2</Order>
                        <CommandLine>slmgr.vbs /ato</CommandLine>
                    </SynchronousCommand>
                </FirstLogonCommands>
            </component>
            <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <InputLocale>en-US</InputLocale>
                <SystemLocale>en-US</SystemLocale>
                <UILanguage>en-US</UILanguage>
                <UILanguageFallback>en-US</UILanguageFallback>
                <UserLocale>en-US</UserLocale>
            </component>
        </settings>
        <cpi:offlineImage cpi:source="catalog:v:/sources/install_windows 7 professional.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
    </unattend>
    The machine succesfully syspreps and shuts down. I restart the computer pxe boot and capture the image succesfully.
    Now here comes my problem...
    Upon deploying the above driver specific image.. my sysprep file is not applied.  Nothing from the OOBE wizard answers to the pc logo , or first logon commands are applied ... nothing.. I have gotten no errors during this whole process.  I have
    started to try to read the logs within the panther folder but havent gotten far.
    What is weird to me is that I have tried recreating this image... deploy the reference image... add drivers ... sysprep ...shutdown.  And if I boot normally (without capturing the image) the computer shows all of the sysprep changes..  Only when
    i capture the image does it not apply the changes....
    I'm stumped...
    Any ides?

    Confirm this scenario: You installed Windows, then ran sysprep and used the /unattend switch. Then you captured the image.
    In this scenario there are 2 deployment methods.
    1. If you deploy the image with DISM, the answer file generated by sysprep is detected on first boot and settings are applied. It is the same function as if you ran sysprep and chose to restart.
    2. If you deploy the image using Setup.exe, it does not use the answer file specified by sysprep prior to capturing. I have not looked into *why* this happens, but I suspect that after the image is applied, it replaces the unattend.xml with the generic one.
    If you are using Setup.exe, you need to use its /unattend switch and point to the answer file location. This location cannot be inside of the image. If you are not using setup.exe in a manual method (using WDS) you will need to apply the answer file to the
    install image in the WDS snap-in.

  • Clicking a Paragraph Style Does Not Apply Style to Text

    I just switched from a PC to a brand new MacBook Pro (OSX Lion 10.7), and I bought InDesign CS5.5. I have been using CS4 on a PC for a couple of years and had no issues. For some reason, I cannot apply Paragraph Styles by placing my cursor in the text and clicking the Paragraph style. It highlights the clicked style for a moment, and then de-highlights all the styles, but does not apply any changes. The only way I can apply a Paragraph Style right now is by right clicking the style and selecting "Apply..." from the drop down menu. It's very puzzling. I was wondering if anyone had any experience with this. I also have Microsoft Office: Mac 2011 installed on the laptop if that makes a difference to anyone. Any help would be greatly appreciated, since I typeset and edit for my living, and this problem is slowing me down a bit.

    Neither. Let's say I click into a paragraph. The current style will be highlighted. If I click on another style (or even attempt to re-apply the same style by clicking on it in the styles pane), it momentarily highlights the new style, then flashes a little bar underneath (like the one that shows up if I were to try to re-organize the styles list by dragging a style to a different pace in the styles list), then all the styles become unselected, but no changes have been applied to the paragraph in question. Very definitely not normal. It is almost as if the pane assumes that I am attempting to drag the style even when I am merely clicking on it. Very weird.

  • Changed column order not applied to interactive report

    Hi,
    I've changed column order for interactive report.
    But it is not applied.
    How can I solve this issue?
    Thanks,
    Guy

    Hi Guy
    It depends on where you have changed the column order. If you change the column order using the 'Select Columns' function when you click on the 'Wheel of Magic', then it should work.
    If you are changing the column order from the Interactive Reports Attributes page then this will only affect the column order for non displayed items and the single row view.
    I hope that helps
    Shunt

  • My dvd player will not let me change regions, it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?

    My dvd player will not let me change regions, it says i have one more chance to change it, then it just quits when i do, now its stuck on region 1. Any thoughts how i can solve this problem or get round it in some way?

    Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
    So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
    Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
    Memory can be tested with memory diagnostics programs like Memtest+
    Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
    If the motherboard has no response then do the basics first:
    Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

  • Changes are not applying

    I have made a couple of changes to a movie and they are not applying in the canvas.
    EG - I have changed the colour of some text that appears. The preview icon on the clip in the timeline has changed the colour of the text, the preview in the viewer has changed, but the canvas hasnt. Also it isnt asking me to render which it usually would.

    You can quickly force a render by lowering, then raising the opacity of the clip. There are also more involved/complex ways to replace a render.
    -DH

  • Changes are not applying to the reports

    hi all
    i have moved the RPD and catalog file to UAT there i got few changes
    i did the changes in DVE and again i moved the changed reports to UAT ,but the report changes are not applied in UAT
    so i again i copied same RPD and catalog to UAT now it is working fine,
    why the changes are not applied to the reports that i have moved to UAT
    is it mandatory to move RPD and catalog to the other environment ??
    Thanks

    Hi,
    if you change even the filters and column names you cant modify only reports and place them in UAT,if you want to cnahge that way there is a tool CAF follow this link how to do that process
    http://debaatobiee.wordpress.com/category/obiee/setup-and-environment/
    If not you need to deploy RPD and catalog into UAT.
    By,
    KK

  • Why when i make changes to songs in my itunes library and then sync, the changes do not apply on my ipod?

    When i go to edit songs in my library, like changing the artists name or album, i then click sync and look on my ipod and the changes have not applied. I tried clicking the manage music manually box and to edit the songs manually from my ipod and still when i edit them and make changes on my actual ipod the songs are still the same. Any help?

    I have tried everything I have read on the Internet about sync issues and restore etc and not there isn't a single song on my iPad or iPod touch. All of the songs are listed in my iTunes but are all greyed out, some have the cloud symbol next to them but lots don't and some say waiting.
    Long and short is nothing will save to my devices at all.....HELP !!!!!!!?

  • Any changes on SCCM console not applied

    Hello,
    We have stand-alone primary site based on System Center 2012 R2 Configuration Manager, suddenly I notice that any changes occur in console is not applied for example I change local admin password in task sequence, remove computer from specific collection
    but no changes applied.
    Plus on System status I didn't found any component monitor.
    I notice that backup SQL maintenance task was stopped because Symantec net backup client was installed, after removing the client I could initiate SQL backup by starting the service.
    Anyone receive such issue ?
    I'm going to check SQL, because it's look like changes are not stored in database, maybe SQL logs are full or something like that, if any one have an idea please share it with me.
    Thanks
    Abduljalil Abolzahab

    @Narcoticoo
    Thanks Narcoticoo
    Actually I found errors in smsdbmon.log files such as
    Failed to connect to the SQL server, connection type: SMS ACCESS
    A network-Related or instance-specific error had occurred while establish a connection to SQL server. Server is not found or not Accessible.... etc
    SQL installed with the same server.
    I checked services and found that SMS_EXCUTIVE was running under local account and status is "Stopping" I change the account to Site admin account then restart and everything is working fine.
    Thanks again 
    Abduljalil Abolzahab

  • Folder Redirection policy is not applied to a user, when the server target is changed, but works after resetting the windows profile.

    Folder Redirection policy is not applied to a user, when the server target is changed. 
    After server target is changed via group policy, when user login  (roaming profile)first time, the the new server target has not been applied, instead it's pointing to the old folder redirection path.
    But if we reset the windows profile (roaming ), the new folder redirection works, can you please specify a solutions that the new folder redirection works when the user login for the first time. so it reduce the time on resetting users profile.
    it seems that we need to delete the old folder redirection path from the user profile (roaming user profile) via group policy or similar solutions..
    Many Thanks

    >   But when the specific users login they all get the same error, it
    Is the old server removed from the domain? Seems so - or some other
    authentication related issue, hard to tell from here...
    > seems that the roaming user profiles still keeps the old server details,
    Yes - if you change redirection targets, FR moves content from old to
    new, and only if this ends sucessfully, it will update the redirection
    target.
    Make the old redirection target accessible to the user and you'll be fine.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Apply Disk Utility Partition Changes not Applying

    Hey Folks
    I've a 2013 iMac with a 3TB Fusion Drive - Currently the HDD is split 2.48 TB as the primary HD - and 521 GB as FreeSpace.
    What I want to do is format this 521 GB section for Windows Bootcamp - The Bootcamp Utility created this split in the first place; but after sitting for 5 hrs it appeared to feeze mid-process and after checking for advice online; I reluctantly force-quit the utility.  Next I attempted formatting this HD section in Disk Utlity as MS-DOS (FAT) but when I choose Apply - and click Partition - absolutely nothing happens - and no changes take place.
    When I re-open Bootcamp Utility - it's seemingly unaware of this 521GB of Free-space and only sees the primary Partition; which I do not want to further split up - remember it's Bootcamp stalling in the middle of the partition process that caused this mess in the first place.
    I've also tried booting form the Windows 7 Disk to reformat and Partition this Free-space - but the installer just spits back the message that the partition is GPT and Windows 7 requires NTFS.  So next -  I  bought and installed Camptune X - which now adds the NT file-system formats directly into Disk Utility but since I cannot 'Apply' these changes - it makes no difference whatsoever.
    To troubleshoot -  I've already repaired my HD permissions, and repaired the drives, booted into recovery mode - done the same steps - but am now at a totally loss what else I can do to successfully create a Windows Partition - if Disk Utility simply won't Apply any of the changes I select. 
    Any suggestions or advice yourselves could give me would be hugely appreciated.

    Hey Folks
    Still no luck - I've now tried using iPartition to add a new Windows formatted Partition in the area that is currently designated 'Free Space' and I get this error message. 
    "iPartition was unable to get write access to the device .... This may mean the device is write protected, that you do not have permission to access it, or that it is in use by something else. "
    Does this mean I can unlock the write access through a command in the terminal and return to Disk Utility or indeed iPartition to add the Windows Partition I need?
    Some advice would be hugely appreciated.

  • I am trying to use the brightness adjustment on a grayscale photoshop CS6 file.  The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment.  I have run into this problem b

    I am trying to use the brightness adjustment on a grayscale photoshop CS6 file.  The preview shows the adjustment working and changes the brightness, but when you click to apply the change, it does not apply the adjustment.  I have run into this problem before, although rarely, with some other files over the years and with earlier versions of CS.  I would like to know how to overcome this problem?

    Make sure you are viewing your image at 100%. At smaller views, pixels and layers and the way they interact are approximate interpolations and won't show you the actual pixel-for-pixel changes.

Maybe you are looking for