Any changes on SCCM console not applied

Hello,
We have stand-alone primary site based on System Center 2012 R2 Configuration Manager, suddenly I notice that any changes occur in console is not applied for example I change local admin password in task sequence, remove computer from specific collection
but no changes applied.
Plus on System status I didn't found any component monitor.
I notice that backup SQL maintenance task was stopped because Symantec net backup client was installed, after removing the client I could initiate SQL backup by starting the service.
Anyone receive such issue ?
I'm going to check SQL, because it's look like changes are not stored in database, maybe SQL logs are full or something like that, if any one have an idea please share it with me.
Thanks
Abduljalil Abolzahab

@Narcoticoo
Thanks Narcoticoo
Actually I found errors in smsdbmon.log files such as
Failed to connect to the SQL server, connection type: SMS ACCESS
A network-Related or instance-specific error had occurred while establish a connection to SQL server. Server is not found or not Accessible.... etc
SQL installed with the same server.
I checked services and found that SMS_EXCUTIVE was running under local account and status is "Stopping" I change the account to Site admin account then restart and everything is working fine.
Thanks again 
Abduljalil Abolzahab

Similar Messages

  • Changes made in Console not appearing on portal until restart.

    When I make any change using the Console, such as changing the title of a channel, that change does not appear on the Portal unless I restart it. Does anyone have any advice?
    The following errors occur:
    In iwtPll logs:
    8/14/02 12:36:15 PM EDT: Thread[Thread-171,5,main]
    Cannot get service handler for synchronize :
    java.lang.ClassNotFoundException: Service class not found:synchronize
    at java.lang.Throwable.fillInStackTrace(Native Method)
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at java.lang.ClassNotFoundException.<init>(ClassNotFoundException.java:69)
    at com.iplanet.portalserver.naming.WebtopNaming.getServiceClass(WebtopNaming.java:126)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.getServiceHandler(Compiled Code)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.handleRequest(Compiled Code)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.doPost(Compiled Code)
    at javax.servlet.http.HttpServlet.service(Compiled Code)
    at javax.servlet.http.HttpServlet.service(Compiled Code)
    at com.netscape.server.http.servlet.NSServletRunner.Service(Compiled Code)
    in iwtProfile log
    8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
    setAttrPrivValues.walkTree
    com.iplanet.portalserver.profile.service.ProfileServiceException: 321^Supp
    lyQuickplace-title-at
    at java.lang.Throwable.fillInStackTrace(Native Method)
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileServiceException.<init>(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.walkTree(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.setAttrPrivValues(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.setProfile(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.processProfileRequest(Compiled Code)
    at com.iplanet.portalserver.profile.service.SyncService.processRequest(Compiled Code)
    at com.iplanet.portalserver.profile.service.SyncService.process(Compiled Code)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.handleRequest(Compiled Code)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.doPost(Compiled Code)
    at javax.servlet.http.HttpServlet.service(Compiled Code)
    at javax.servlet.http.HttpServlet.service(Compiled Code)
    at com.netscape.server.http.servlet.NSServletRunner.Service(Compil
    at java.lang.Throwable.fillInStackTrace(Compiled Code)
    at java.lang.Throwable.<init>(Compiled Code)
    at java.lang.Exception.<init>(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileServiceException.<init>(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.walkTree(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.setAttrPrivValues(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.setProfile(Compiled Code)
    at com.iplanet.portalserver.profile.service.ProfileService.processProfileRequest(Compiled Code)
    at com.iplanet.portalserver.profile.service.SyncService.processRequest(Compiled Code)
    at com.iplanet.portalserver.profile.service.SyncService.process(Compiled Code)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.handleRequest(Compiled Code)
    at com.iplanet.portalserver.pll.server.PLLRequestServlet.doPost(Compiled Code)
    at javax.servlet.http.HttpServlet.service(Compiled Code)
    at javax.servlet.http.HttpServlet.service(Compiled Code)
    at com.netscape.server.http.servlet.NSServletRunner.Service(Compiled Code)
    8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
    ProfileResponse: exception key:321
    8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
    ProfileResponse: exception string:SupplyQuickplace-title-at
    8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
    ProfileRequest.GetProfile:In atts 1
    8/14/02 12:36:15 PM EDT: Thread[Thread-709,5,main]
    ProfileRequest.GetProfile:In privs 0

    The exceptions indicate that there is profile service errors which could have happend when it was trying to fetch those attributes.
    What version of portal are you using ?, are you running a multi server instance ?, if so there is a possibility that the profile cache could be out of sync between the two instances. Generally making profile changes would necessitate the need to logout and log back and only when you change ldap auth information or property file changes you would need to make server restarts ..

  • How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes. And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

    How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes.
    And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

    Are you just asking because you want to know, or do you have a problem you need to solve? I don't know how to write a program, but I think what your are describing is not an unusual thing for a  program to do. The * tells you that changes have been made since the last save, and the program reserves a portion of memory for undo functions. I suppose a coder could tell you how it works, but I don't think it would help an average user to know, but that's just my opinion.

  • Changes in SpeedGrade do not apply to Clips in Premiere

    Hi there,
    I have edited three commercials from ProRes4444 material.
    I have color corected these in SpeedGrade. so far so good.
    Then i made minor adjustements in editing and mastered the sound.
    Now as a last step i wanted to finetune the colorcorrection.
    I can open the project in speedgrade an it remebered the cc from before, but if i make any changes now and send them back to premiere they simply won't apply to the clips, they remain with their first color correction.
    I don not suspect that i still see pre rendered clips in the premiere timeline, as i rendered out a test without using the previews already, and still no change in color correction there
    Can anybody please help me out here?

    I only have cs6 .. so everyone knows what that is... going to SG as dpx and or xml etc.
    One of the things important, I think, regarding color stuff and basic out of camera corrections is that there is a wide range of people who feel that color correction is pre edit and grading is post edit. There are lots of threads on internet about this subject..
    Basically , if you wanna get your source material close to what you intended ( and here you can use grayscales and color stuff you shoot at heads of shots ) you do that before edit..
    takes time and is pain to do but is good starting point..
    then you edit and do what you have to do in order to 'grade' .. so initial color correction is pre edit , grade is post edit ... and the workflow follows that criteria more or less...
    I know this doesn't influence the workflow of this thread but it might be cool to keep in mind ... ??

  • Sound Blaster Extreme Music do not detect changes on the console

    I'm using the sound blaster X-Fi XtremeMusic with Logitech Z-5500 and the Flexi Jack, connected on Digital mode (Using Coaxial and Optical). The OS? Is Windows Vista Ultimate 32 Bits.
    The problem at this moment is that I can not make any change on the console configuration, I mean, if I change the speaker connection or change any parameter of the configuration has no reaction,I even change the EAX effects, the CMSS-3D ad nothing happen, all that I can control with the console launcher is the volume.
    I reinstall the drivers and download from the website the latest drivers I found and same problem.
    ?Any help?
    THANKS?

    Choose Soundblaster in the dropdown box and you will see XFi listed , you will find the latest drivers there....Seems rather strange to me since this is a XFi card, but hey I did not design the Website......
    Message Edited by warriorking on 03-05-200706:40 PM

  • Has anyone a solution to two update having the following popup-"We could not complete your request.  There was an error in the App store.  Please try again later.?"  I've tried over 4 days without any change.

    Has anyone a solution to two update having the following popup-"We could not complete your request".  There was an error in the App store.  Please try again later.  I've tried over 4 days without any change.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • ZCM 11 Group Policies not applying to satellite servers

    Hi there
    We are running 2 Windows 2012 Primary Servers and a SQL 2012 Database server at our main site, all remote sites have SLES11 SP2/OES11 SP1 as satellite servers. We upgraded all servers last weekend to 11.3.1 and now have an issue with Group Policies applying to the satellites. The satellites are all set up the same with Authentication, Collection, Content and Imaging roles.
    Since we upgraded Group Policies are (99% of the time) not applying on satellite sites. I have tried manually replicating content (I assume policies will come from content replication?) to the satellites - I've done this with a zac cdp replicate and zac cvc and everything seems to replicate over however I tried highlighting a satellite server and clicking on Action, Specify Content - select the Policy that is not applying and move it into the selected Content to update column and when I click finish I get the error "The Wizard cannot continue for the following reason(s): Unable to complete your request for the following reason: Error updating content"
    On a managed device at the satellite site if you look at the properties of the Zenworks agent and click on Policies it has applied 4 device assigned policies successfully - Remote Management, Power Management, Application Launcher Config and Application Control Policy, also has successfully applied 3 out of the 4 User Assigned Policies - Mandatory Profile, Dynamic Local User, Application Control - but not the Windows Group Policy.
    Our PCs are on Windows 8.1 and all policies were applying fine before the weekend upgrade......
    Has anyone else had any experience of Group Policies not applying that could point me where to look? I have logged an SR with Novell through our reseller but as yet I am getting no response back at all, not even asking me for more information.
    Many thanks
    Sharon

    Sounds like you have a content replication issue more than a GPO issue.
    Especially if the GPO works for locations that point to the Primaries
    for Content.
    Do you have throttling configured anywhere in any fashion?
    You may need to increase the Replication Timeout to make sure content is
    getting over to the Sats. Often increasing from 60 to 240 helps, but
    watch out for throttling preventing content replication.
    It is possible things are backing up.
    On 7/31/2014 8:26 AM, shazzypoos wrote:
    >
    > I should add that when you looked at the "Click for Details" to the
    > right of the Effective "Failed" status the message is "Policy
    > Enforcement Failed : The action (0) threw an exception. Message (1).
    > Exception (2) (grouppolicy, "None of the source locations could be
    > found"
    >
    > Hmmmm! Currently in closest server rules there is only the server for
    > the site it's on set - we do not want it to come back to the Primary for
    > policies. As I say, this was working before the weekend upgrade. Thanks!
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Technical Support Engineer
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • How inDesign notify for any changes on document.?

    How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes.
    And after saving * symbol is get removed from the name of document. How and where indesign@ handles this? How to get Notification?

    Are you just asking because you want to know, or do you have a problem you need to solve? I don't know how to write a program, but I think what your are describing is not an unusual thing for a  program to do. The * tells you that changes have been made since the last save, and the program reserves a portion of memory for undo functions. I suppose a coder could tell you how it works, but I don't think it would help an average user to know, but that's just my opinion.

  • GPO not applied at all with build 9926

    Hello,
    I have a Samba 4 Active Directory Domain controler. My LAN is composed of XP and 7 computers ; everything works well.
    I also have tested previous builds of Windows 10, and had no particular problem with Group Policies.
    With build 9926, my GPOs are not applied at all. It seems there is a big change making Group Policies not applied / not reloaded when users log in. Here are step by steps what I have noticed :
    0) At the very first log in, when I do a gpresult /V, i have a message saying something like "no rsop data for this user"
    1) I performed a gpupdate /force
    2) I performed another gpresult /V and then I got information about my GPO
    3) I logged out and logged in with same user --> my GPO is applied
    4) I modified my GPO to set new policy
    5) I loggged out and in again --> old policies are applied but new policy is not applied
    6) I performed gpresult /V --> new policy is not displayed
    7) I performed a gpupdate /force and then a gpresult /V --> new policy appears
    8) I loggged out and in again --> All policies, including the new one are applied
    So it seems the GPOs are not automatically updated and applied when logging in, and I have to force them manually.
    The good question is : WHY ? :)
    Thanks
    Will

    Hi Will799114,
    I tested this in my environment, it seems a restart would apply group policy successfully, but a sign out and sign in would not trigger this procedure.
    Here I would suggest you post your feedback directly to our Feedback channel:
    http://windows.microsoft.com/en-in/windows/preview-how-to#how-to=tab7
    Alex Zhao
    TechNet Community Support

  • Problem with Out of Band Discovery resulting with Out of Band features not available in SCCM console for computers with provisioned AMT device

    Hi,
    We configured the Out of Band component, but are using Intel SCS RCS to provision AMT devices remotely­. The remote configuration process with Intel SCS works fine; we are able to connect to the AMT web UI and we can use a free KVM tool to manage the computer
    remotely.
    The AMT devices are configured with AD integration, so an object is created for each of them in a specific OU. Also, an AD group is added to the AMT devices so remote PT Administration permission is granted to it. This group includes the ConfigMgr Site
    Server account, the account of the server running the Out of Band Service Point and my own user account.
    This configuration seems OK since when connecting to the AMT web UI, I use Windows Integrated authentication with my user account and can manage the device successfully.
    So the only step remaining is running the OOB discovery to enable Out of Band features for the computers in the SCCM console. We want to use the ConfigMgr OOB console. I right-click a computer or a collection and launch the AMT discovery. I check the OOB
    server log, I don't see errors; the OOB service point connects to the AMT device and discover a status of 4, which is Externally provisioned, as expected. The problem is the AMT Status, AMT Version and Provisioned AMT fields for the computer in the ConfigMgr
    console doesn't get updated, even after doing display refresh.
    Here's the amtopmgr.log (I changed computer name and IP address information to protect client privacy) :
    General Worker Thread Pool: Work thread 364 started SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
    Discover COMPUTERA using IP address 192.168.12.7 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
    AMT Discovery Worker: There are 1 tasks in pending list SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
    AMT Discovery Worker: Wait 20 seconds... SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
    AMT Discovery Worker: Wakes up to process instruction files SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
    AMT Discovery Worker: There are 1 tasks in pending list SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
    AMT Discovery Worker: Wait 20 seconds... SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
    DoPingDiscoveryForAMTDevice succeeded. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
    Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
    session params : https://COMPUTERA.contoso.com:16993   ,  11001 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
    DoWSManDiscovery succeeded with user name: admin. AMTStatus = 1. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    Start Kerberos Discovery SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    session params : https://COMPUTERA.contoso.com:16993   ,  484001 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    DoKerberosWSManDiscovery succeeded. AMTStatus = 4. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    Discovery to IP address 192.168.12.7 16 15:16:32 364 (0x016C)
    CSMSAMTDiscoveryTask::Execute, discovery to STI17259CPCO succeed. AMT status is 4. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    CSMSAMTDiscoveryTask::Execute - DDR written to E:\SMS\MP\OUTBOXES\ddr.box SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Fill Machine Property' SID=1 MUF=0 PCNT=5, P1='COMPUTERA' P2='' P3='COMPUTERA.contoso.com' P4='' P5='' SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    CStateMsgReporter::DeliverMessages - Created state message file: E:\SMS\MP\OUTBOXES\StateMsg.box\6heghx71.SMX SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Unspecified' SID=10 MUF=0 PCNT=1, P1='COMPUTERA.contoso.com' 16 15:16:32 364 (0x016C)
    CStateMsgReporter::DeliverMessages - Created state message file: E:\SMS\MP\OUTBOXES\StateMsg.box\rmit91js.SMX SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    General Worker Thread Pool: Succeed to run the task COMPUTERA.contoso.com 16 15:16:32 364 (0x016C)
    General Worker Thread Pool: Work thread 364 has been requested to shut down. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    General Worker Thread Pool: Work thread 364 exiting. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
    The Management Point is up and running.
    Any suggestion or advice is welcomed!
    Thank you
    Patrick

    I found something interesting on this problem, it seems the OOB discovery process is working fine, but for an unknown reason, the site server is not receiving the information from the OOB Service Point to update the AMT Status of the client in the SCCM
    database.
    The log tells me that a DDR file is created to be sent to the site server. When looking into the SMS\MP\Outboxes\ddr.box folder, I see about 50 DDR files, the oldest one is dated when I started testing OOB discovery.
    So the server is unable to send the files to the site server.
    Also, since I started this thread, I noticed another issue that could be related to this problem. The same server is also holding the State Migration Point role, it is working fine, but when doing USMT operations, the status of the computer association is
    not updated in the console (In Progress, Completed, missing USMT store path, etc.). When looking into the SMS folder on the server, I see a big backlog of SVF files containing information related to the SMP.
    I looked into the log files, but didn't find the errors yet to explain this.
    The computer account of the server is a member of the SMS_SiteSystemToSiteServerConnection_Stat_XXX group on the site server.
    Note that status messages are being sent successfully, I see them in the Monitoring node of the console under Component State, and there is no backlog in the SMS\MP\Outboxes\statemsg.box folder.
    Tnx for your help
    Patrick

  • SBS 2011 GPO for changing the default save path applying to Win7 but not working

    So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
    folder.
    The GPO (U-Office2013 Default Save Location) only contains:
    1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
    2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
    The GPO is linked at the OU that contains my users for my SBS organization.
    When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
    Applied GPOs
    Default Domain Policy dyndns.local AD (24), Sysvol (24)
    U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
    In the gpresult report, the applied settings appear under:
    Administrative Templates
    Extra Registry Settings
    software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
    software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
    BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
    The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
    Any ideas?
    I've already tried re-installing the ADMX templates and re-created the GPO's several times.
    Thanks in advance.

    When a group policy is not applying, it is often that it has been linked to the wrong OU. Please first check this.
    You might also check the apply status on the client site based on the GPSVC.log.
    How to enable GPO logging:
    http://blogs.technet.com/b/csstwplatform/archive/2010/11/09/how-to-enable-gpo-logging-on-windows-7-2008-r2.aspx
    It looks more like an issue on server side than an issue of Office Group Policy settings. Try to post in Server forum and see if there is any luck:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver

  • Logical standby is in Normal State but it dosent apply any changes.

    I had a Rac  active data guard 11.2.0.3   and i converted it to logical standby database.
    My soluition was same as this link :  http://docs.oracle.com/cd/E11882_01/server.112/e41134/create_ls.htm#SBYDB4734
    After that configuration was complete,
    When i change for example 1 row in a table in primary server, it does'nt Apply in standby server .I have checked alert log file and i have not seen any error in alert logfile.
    Primary parameter file:
    *.db_name='KS'
    *.db_unique_name='KS'
    *.dg_broker_start=true
    *.fal_client='KS'
    *.fal_server='KSSTBY_standby'
    *.log_archive_config='DG_CONFIG=(KS,ksstby)'
    *.log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=KS'
    *.log_archive_dest_2='SERVICE=KSSTBY_standby LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=ksstby'
    *.log_archive_dest_3='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=KS'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_dest_state_3='ENABLE'
    *.log_archive_format='archive_%s_%t_%r'
    *.log_file_name_convert='+DATA/KSSTBY','+DATA/KS','+fra/KSSTBY','+fra/KS'
    *.db_file_name_convert='+DATA/KSSTBY','+DATA/KS'
    *.standby_file_management='auto'
    Logical standby parameter file:
    *.db_name='KS'
    *.db_unique_name='ksstby'
    *.fal_client='ksstby'
    *.fal_server='KS_primary'
    *.log_archive_config='DG_CONFIG=(KS,ksstby)'
    *.log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=ksstby'
    *.log_archive_dest_2='SERVICE=KS_primary LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=KS'
    *.log_archive_dest_3='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=ksstby'
    *.log_archive_dest_state_1='ENABLE'
    *.log_archive_dest_state_2='ENABLE'
    *.log_archive_dest_state_3='ENABLE'
    *.log_archive_format='archive_%s_%t_%r'
    *.log_file_name_convert='+DATA/KS','+DATA/KSSTBY','+fra/KS','+fra/KSSTBY'
    *.db_file_name_convert='+DATA/KS','+DATA/KSSTBY'
    *.standby_file_management='auto'
    The Status of Standby server :
    select sequence#,applied from dba_logstdby_log;
        SEQUENCE# APPLIED
    1 5486 CURRENT
    2 5487 CURRENT
    3 5488 CURRENT
    4 5489 NO
    5 5490 NO
    6 5491 NO
    7 5492 NO
    8 5493 NO
    9 5494 NO
    select * from v$logstdby_stats;
        NAME VALUE
    1 logminer session id 1
    2 number of preparers 1
    3 number of appliers 5
    4 server processes in use 9
    5 maximum SGA for LCR cache (MB) 30
    6 preserve commit order TRUE
    7 transaction consistency FULL
    8 coordinator state INITIALIZING
    9 coordinator startup time 28-APR-15
    select * from v$logstdby_state;
        PRIMARY_DBID SESSION_ID REALTIME_APPLY STATE
    1 3130490787 1 Y APPLYING
    Please help to me.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    In Firefox 4 [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
    Check if there is an update available for your graphics display card driver.
    * Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • Template Changes Do Not Apply Globally

    I am having issues with Templates.
    I have setup editable regions and saved my pages as
    templates, etc but nothing seems to work.
    How do I make changes to editable regions and have those
    changes apply globally throughout my pages which all have the same
    editable regions?
    Also, when I open a new page from the templates I saved, it
    only allows changes to the editable regions??? What gives? Isn't
    the whole point of opneing up &quot;new from template&quot;
    to create a new pages which shares the same editable
    regions?

    > Maybe we should start here then...
    > Usually, (the way I am used to building sites), is I
    create a page I like,
    > then
    > whenever I I want to create a new page, based on that
    design I open that
    > page
    > and do Save As a different file name.
    This is the wrong way to use templates.
    To use templates, you must spawn a child from the template
    using FILE | New
    from Template...
    This will create a page that no longer contains "Template"
    markup, but
    instead contains "Instance" markup so that DW can tell what
    to do with
    editable/non-editable regions.
    > The alternative to the Save As method, is that I choose
    create
    > new from template, but then I typically have to change
    more stuff.
    That's wrong. It's not an alternative - it's the right way to
    do it. And
    what "more stuff" do you have to change?
    > I have tried making
    > changes to that page and uploading - I mean putting, but
    it changes
    > nothing
    Of course, because you still have not understood how
    templates work. They
    have NO function on the server. They only work INSIDE of DW
    to change your
    local files. It's the changed local files that must be PUT to
    the server,
    NOT the template.
    For what it's worth, I cannot stand what the nasty webforum
    does to your
    post....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "DJ Website Designer" <[email protected]>
    wrote in message
    news:[email protected]...
    >
    quote:
    Originally posted by:
    Newsgroup User you've missed
    > the
    > purpose and process entirely.-- Alan Adobe Community
    Expert, dreamweaver
    >
    http://www.adobe.com/communities/experts/
    Maybe we should start here
    > then...
    > Usually, (the way I am used to building sites), is I
    create a page I like,
    > then
    > whenever I I want to create a new page, based on that
    design I open that
    > page
    > and do Save As a different file name. Then, since the
    template regions,
    > i.e.;
    > the navigation or footer, or anything that might have to
    be altered later
    > and
    > global changes applied are already on that copied page,
    I can change one
    > or the
    > other and all the changes are applied to all pages which
    share the
    > navigation
    > or footer, etc. The alternative to the Save As method,
    is that I choose
    > create
    > new from template, but then I typically have to change
    more stuff. So,
    > for
    > example the site in question here:
    http://towtruckswreckerscarriers.com
    I
    > have
    > several pages which may be duplicated time and time
    again, with only
    > certain
    > portions of them being changed to suit the new page.
    Pages like this would
    > be
    >
    http://towtruckswreckerscarriers.com/wrecker-new-tow-truck-2007-red-ford-f550-su
    > percab-xlt-7EA86941.html Obviously if I am creating gobs
    of these pages,
    > if I
    > make any changes to the main navigation or any other
    elements which are
    > global,
    > I would like these changes to appply to all these pages
    as well. SO...
    > Not
    > having ESP to DW's designer's philisophy (and Help Pages
    certainly don't
    > convey
    > it), that's what I thought the purpose of using DW
    templates was. To
    > eliminate
    > the need of opening each and every page and updating
    site features over
    > and
    > over, then re-uploading (putting), pages on my host
    server. I do have a
    > folder
    > in my directory named templates, with a file index.dwt
    (I have tried
    > making
    > changes to that page and uploading - I mean putting, but
    it changes
    > nothing).
    > So, in my case how would I save a page to be used over
    an over again,
    > which I
    > could make multiple copies of and yet still change stuff
    on those pages
    > (like
    > images, text, Title, metas) PLUS have the ability to
    make a change to site
    > navigation, etc and see it populate all the pages I have
    already created?
    >
    >

  • Why when i make changes to songs in my itunes library and then sync, the changes do not apply on my ipod?

    When i go to edit songs in my library, like changing the artists name or album, i then click sync and look on my ipod and the changes have not applied. I tried clicking the manage music manually box and to edit the songs manually from my ipod and still when i edit them and make changes on my actual ipod the songs are still the same. Any help?

    I have tried everything I have read on the Internet about sync issues and restore etc and not there isn't a single song on my iPad or iPod touch. All of the songs are listed in my iTunes but are all greyed out, some have the cloud symbol next to them but lots don't and some say waiting.
    Long and short is nothing will save to my devices at all.....HELP !!!!!!!?

  • Not Widely Deploying the SCCM Console?

    Hello all -
    We are in the process of implementing SCCM 2012 R2 and the company I work for is fairly spread out, with lots of geographically dispersed locations and IT staff. Ideally we were looking to not deploy the SCCM console to these folks, but instead find
    ways to make the functionality work outside of it. A few examples are:
    All needed Collections based off AD Security Groups (tested this works)
    SCCM Remote Connection, pull out of the console (tested this works)
    I had a few questions based on this scenario:
    Is there any way to make the resource explorer accessible outside of the SCCM Console?
    Do a lot of people try and extrapolate the functionality out of SCCM like we are, or do most people deploy and train on the console?
    When we were just looking at the collections and remove connection, i'll admit that I was leaning towards not deploying the console. Once I found out folks needed the Resource Explorer I started to wonder if just deploying the console would be the best
    bet. I am worried we will keep finding these scenarios and it may been beneficial to just go the route of the console from the beginning. 
    I appreciate any feedback. Thanks.

    A couple of additional notes here. The console uses a "fat" RPC connection to the SMS Provider. This generally does not perform well over WAN links so if you truly have a very spread IT population of folks needing access to console, I highly
    recommend you use an RDSH solution.
    Next, resource explorer would be the last reason I would give anyone access to the console. It's a nice tool for sure, but you can get the exact same (and a whole lot more) information out of the reports. I'm not saying don't give them the console,
    just that resource explorer is not all that useful at the end of the day and can easily be replaced by reports.
    Jason | http://blog.configmgrftw.com | @jasonsandys

Maybe you are looking for