[solved]Possible issue with forum search

This thread does not show up in a search for "xfce" in "Topic subject only". 
Edit: apparently, all searches are "described" the same way, so nevermind the rest.
Also, the description for the search is
Topics with posts containing 'xfce'
which seems like a poor description for a search in "Topic subject only". 
Topics containing 'xfce'
would be much more appropriate I think.
Last edited by alphaniner (2012-04-30 18:45:25)

alphaniner wrote:
There's a particular cruelty in Arch having a broken forum search function, as often as people are admonished for not STFF.
If the function is known to be bugged, wouldn't it be responsible to point that out somewhere, if not remove it entirely?
https://wiki.archlinux.org/index.php/Main_Page tels you that you can use Google search too. Such a note for the forum would be nice.

Similar Messages

  • [SOLVED] Possible issue with makepkg or gnupg 2.1???

    I am quite willing to admit that it's possible I'm totally stupid and missing something basic, but I just wanted to see if this makes any sense to you folks. Basically, I'm wondering if there's a regression in makepkg or gpg-agent with GnuPG 2.1.
    Step 1: Verify the condition of my personal keyring.
    gpg -k | grep Xyne
    No results. Good.
    Step 2: Verify the condition of pacman's keyring.
    sudo pacman-key --list-keys | grep Xyne
    No results. Good
    Step 3: Use pacman-key (NOT my local GPG keyring) to import Xyne's key and trust it.
    sudo pacman-key --recv-key EC3CBE7F607D11E663149E811D1F0DC78F173680
    sudo pacman-key --lsign-key EC3CBE7F607D11E663149E811D1F0DC78F173680
    sudo pacman-key -u
    Step 4: Try to install pm2ml, signed by Xyne, and use makepkg to verify that yaourt is NOT the problem. This will not work.
    yaourt -G pm2ml
    cd pm2ml
    makepkg -s
    ==> Verifying source file signatures with gpg...
    pm2ml-2014.12.31.tar.xz ... FAILED (unknown public key 1D1F0DC78F173680)
    Step 5: Check that I'm not crazy.
    sudo gpg --homedir=/etc/pacman.d/gnupg --verify pm2ml-2014.12.31.tar.xz.sig
    gpg: WARNING: unsafe permissions on homedir '/etc/pacman.d/gnupg'
    gpg: assuming signed data in 'pm2ml-2014.12.31.tar.xz'
    gpg: Signature made Tue 30 Dec 2014 05:55:07 PM MST using RSA key ID 8F173680
    gpg: Good signature from "Xyne. (key #3) <[email protected]>" [full]
    Step 6: Import Xyne's key into my local GnuPG keyring, which I should definitely not have to do:
    gpg --recv-key EC3CBE7F607D11E663149E811D1F0DC78F173680
    gpg --lsign-key EC3CBE7F607D11E663149E811D1F0DC78F173680
    makepkg -s
    Makepkg will work at this point. I have tried this three times, and I can duplicate it 100% of the time.
    Is my configuration messed up, or can anybody else duplicate this? I'm wondering if the gpg-agent since GnuPG 2.1 doesn't switch home directories or something and refuses to see a new key even though I just imported it? It seems like the key and the signature are both clearly valid, but I can only get Xyne's package to verify using makepkg if I import his key into my ~/.gnupg keyring.
    Again, I could be totally stupid, but I legitimately do think there might be a bigger issue.
    Thanks.
    Last edited by AdrianCohea (2015-01-31 21:27:30)

    Okay, sorry! I didn't know that was intended behavior. That actually makes me a lot happier.
    It just didn't seem intuitive to me that I would have to add the developer's public key to my own keyring rather than to pacman's keyring. Almost guides I had previously read previously said I needed to use pacman-key to import the public key.
    This thread can be marked as solved, because there is no issue.

  • HT1918 How do you solve an issue with the card? I don't get the option of 'none' :(

    How do you solve an issue with the card? I don't get the option of 'none'

    I had this exact same problem with the new iPhone I bought on 1/4/13. The walk through they provide on how to do this is useless because it fails to explain that if you are already having the problem of not getting the "None" payment option with an Apple ID then you will need to create a completely new Apple ID.
    I had to do this 7 times since I bought my iPhone on Friday until this morning to figure out how to finally be able to use the Home Sharing option in iTunes to put my music collection on my brand new $500.00 iPhone. Pretty pathetic if you ask me but since it made me so angry I want to make sure other know how to do this so you don't get as upset as I did.
    #1 If your current or soon to be "old" Apple ID is not providing the option for "None" as a payment option then you need to make a brand new one. But you have to make it specifically how I tell you.
    #2 You will need to use an email address that has not already been used for anything related to a previous Apple ID. You might need to make a brand new email address.
    #3 Open iTunes, then open iTunes Store (upper right corner of iTunes).
    #4 Click on App Store (upper center of screen).
    #5 Scroll down the screen page until you see Top Free Apps on the right side.
    #6 Choose any one of the FREE apps.
    #7 You should either get the option to create a new Apple ID box, either that, or it will pop up with some kind of disclaimer and then it does the create new Apple ID.
    Either way just create a new Apple ID when it gives you the option to and then when you get to the page that looks like the payment page the "None" payment option will finally be available.
    Note: You will still have to fill out the information on the payment page. As long as you choose the "None" option it will not request any credit card information.
    #8 You will be sent a confirmation email to the new email account. Just follow through with what ever it tells you and viola now you can use your Apple Device.
    What a pain in the keester, eh?

  • Hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

    hi i have updated the 8.1 in my i phone 4s . then i got in my home screen i tunes and charging symbol only . its not getting on . can you help me out to solve the issue with my phone ?? thanks.

    Hi vijayanandhtkp,
    It sounds like you are getting the Connect to iTunes screen as discussed in this article.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    If so, please check out this article as linked from there.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    Thank you for using Apple Support Communities.
    Nubz

  • What's possible issue with original Airport?

    Hi,
    I recently just purchased a used Powerbook G4 867 512M and installed an original airport card. The signal strength indicator seems to flicker in and out from no strength to highest but mainly resting at the "second" bar strength. This laptop is sitting next to a G4 tower which is getting full strength. Is there a possible issue with my laptops connectivity? Should I re-seat the airport card? What could be the issue?
    Thanx in advance.

    Hi,
    Duane. Althoughity, I didn't verify whether the card had any physical connectivity issues, I don't think that is the problem. I made the simple move in location and that seem to have change the "bar" strength. I guess where I was was not a good area for network connectivity. Thanks for possible solutions and causes.

  • Issue With Similar Search Strings in EBS

    Hi Everybody, I'm experiencing some issue regarding a Search String that I have, the config is very similar, the only difference between one and the other is that there's a specific posting rule for one particular account.
    EG: Search String 1: (^)ACCOUNT TRANSFER TRSF TO( |$)
          Search String 2:(^)ACCOUNT TRANSFER TRSF TO 1111111111( |$)
    (Where 1111111111 is the bank account)
    Same Extenral transaction, NTRF, Same house bank and account id. Same Comapny also
    But when executing a Statement with the 1st one it works fine, but when runing the 2nd one it does not use any of them(it takes the Posting rule set for NTRF in the EBS configuration).
    I've tested it in the SS test and it takes the right posting rule.
    If you have any clue on this I'll really appreciate it.
    Regards
    Luciano

    I apologize for the above and the thread has been posted here as I was unable to access the correct category due to some technical issues with Oracle forums. Also, the mentioned issue is in critical state and has a deadline so thought of posting to get it resolved as soon as possible. Specific categorization will be surely taken care in future.
    Moving the thread to below location:
    http://myforums.oracle.com/jive3/thread.jspa?threadID=1023776
    Edited by: 931435 on Jun 6, 2012 12:25 AM

  • Mar-2015 firmware for hp 8620 solves my issue with 6x4 paper not being picked up

    I had continual problems with my hp 8620 not picking up 6x4 photo paper.
    I tried a number of fixes as suggested elsewhere on forums. I had the most success with the "scan and copy 99 blank a4 pages" workaround, but half the time the printer would still fail to feed the 6x4 on the first go.
    Good news though, the latest firmware dated Mar 17 2015 has resolved this for me, and maybe it will improve it for others with the same problem.
    The firmware says:
    "This firmware upgrade is for HP Officejet Pro 8620/8625 e-All-in-One Printers.
    File name: OJP8620_R1502A.zip
    Release details
    Released: Mar 17, 2015
    Version FDP1CN1502AR
    Fix and enhancements
    Improvement to connectivity robustness
    Improvement to paper-path reliability"
    The link is here: http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8620-e-All-in-One-Printer-series/53...

    I just spent several hours troubleshooting this printer. My rollers were all clean. I then used a bright flashlight and monitored thru the front what it was doing when trying to load paper.. There is a grey wheel that is lowered to the paper and rotates pulling the sheet in. It simply just isn't getting lowered enough because its just spinning on top of the paper. I've tried a dozen different types of paper from heavy/thick to thin. I've tried fanning the paper and I've tried not fanning the paper. I've tried a full stack of paper down to a few sheets and everywhere in between. This is just a flawed printer and based on the hundreds of people I see having the exact same issues with this printer so soon afte purchase is an eye opener. {Content Removed: no legal discussion permitted} I'm simply this fed up with my last several HP printer purchases. Anyone else that is as fed up with me please {Personal Information Removed}. I'm going to start tracking down as many people as I can. I'll likely move this discussion to a third party forum, hopefully one with a very high volume of traffic so if this post mysteriously disappears google search for it.

  • Help solve these issues with the n97

    Owner of a black N97. Software ver.: V.11.0.021(.238.01) - 19.06.2009
    Type: RM-505
    The issues I have.
    1. The alarm clock sometimes goes off 3-4-5 min, later than it was set. Ex. set alarm for 8am, and it goes off at 8:04, 8:05.
    2. Contacts. Prev. I had the E50. I have all my contacts now in the N97's mem, so no numbers/contacts are on the sim card. The problem. I have a contact that has multiple phone numbers. When I get a call from the person neither the name or the picture assigned to her will show up, just the number. **bleep**? 600 euro phone
    3. I left the phone to charge at night. I wake up in the morning it shows 2 bars. I restart the phone it shows fully charged (7 bars).
    4. Laggy orientation issues, sometimes the phone can't make up it's mind in what mode it should be.
    5. Sometimes the keyguard switch doesn't do it's job, have to slide it 2-3 times. For example, you have the screen locked. You slide the camera's protective cover. You use the keyguard switch.... once, nothing happens. You have to slide it again (2-3) times so it finally unlocks the screen/keys.
    6. Once I turned on the cam, video mode, lights on (used the phone's leds as a ligh in the night, walked for about 10 min. like this and the next thing I know when I want to turn it off.... the phone doesn't respond, freezed up, had to turn off, and when I did I had the nokia logo and an ugly red line across the screen, turned it back on, worked again....
    Sorry if I ask/talk about things that have been discussed/solved before.
    Hope to get feedback from someone on the issues I have especially for the contacts issue and if maybe somebody could tell me what dimentions does the caller id image should be so that I have no issues with it?
    Thanks in advance.
    (PS: Despite the issues I ran into even after I updated from v.10 to v.11 I like the phone and I really hope that newer software updates will solve the issues we have. BTW I advise you all not to use themes. Altho I am a big customization fanatic myself, my old E50 teached me a lesson. If it's not nokias shipped with the device theme, it's gonna cause you problems. No more will I install and use custom themes. It just makes your phone crash and do very very weird things. (and the themes I used were from babinokia not just some hillbilly site). One of my big dissapointments with the E50 was that I could not change / set a custom image as fullscreen wallpaper. It only showed a cropped version of the image on the middle of the screen. In order to change the wallpaper u had to find a theme.)

    Upgrade to V12? Might help on some issues.
    As for the contacts problem, I can report that it works fine for me, and I have several numbers on most of my contacts.
    This problem is usually because the same number exists on more than one contact. Unfortunately I haven't found a way to actually search for which contacts might have a number, so the only sugegstion I can offer is that you search through every entry in your phone book, and see if you can't find the same number on more than one contact.
    Don't forget to also check the entries on the SIM card, especially if you have set th phone to use both phone and SIM.

  • Issue with Google search on Safari

    Hello: I am having the same issue with my iPad and iPhone 6. I think it may be related to iOS 8. when I was running iOS 7 whenever I would search for something in the Google search bar with and Safari the search bar would start to get suggestions what I may be searching for. For example if I would type in IT it would suggest that I was searching for the word Italy. Ever since I up dated to iOS 8 the suggest feature no longer works. I was wondering if this is an Apple issue and they will resolve it in a future iOS update or is there a problem with my settings. FYI in my Safari settings the default search is set to Google.
    Thank you.

    I have been having this same issue since the upgrade, and I cannot seem to fix it. I have restored, but iTunes won't let me revert back to pre 8.0/2.
    Have not found any kind of resolution to this problem, and it doesn't seem to be a wide issue, as this is the only post I have seen on it.
    Really annoying.

  • Issue with Formatted Search and Sales BOM

    Good afternoon,
    One of our customers uses a Formatted Search on the Sales Order row to lookup the Project Code stored against the Item.
    This works very well, except for when a Sales BOM is selected.  I assume the FS lookup is working correctly, but the screen is quickly refreshed to list all the component items related to the BOM.  This process appears to overwrite the contents of the Project field.
    We wish to keep this functionality, but retain the FS lookup results in the Project column.  Could the order of the process be changed so that the BOM refresh occurs prior to the FS lookup.
    Thanks
    Greig
    Edited by: Greig Burrows on Jul 21, 2010 5:57 PM

    Hi,
    For metadata, which metadata are you not seeing? Are they custom properties within the PDF, and have you checked if you have crawled properties matching these?
    I know there's issue with last modified on PDF's (http://sharepointfieldnotes.blogspot.no/2013/05/understanding-and-getting-sharepoint.html) 
    Thanks,
    Mikael Svenson
    Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
    http://techmikael.blogspot.com/
    Author of Working with FAST Search Server 2010 for SharePoint

  • Possible Issues with Duplicate Training Database?

    Hello everyone!
    First off, please forgive my ignorance! I've only been working with databases lightly over the last couple of years, and thus far only with MySQL and MS SQL.
    Recently the company I work for purchased a new software package that required Oracle. We purchased a copy of Oracle 10.2 as part of the deal and the company that sold it to us, and set it up for us, has denied us dev access to the database, on our server, because it would expose their underlying data schema. I wasn't in change when the decision was made and we spent the money on a crippled copy of Oracle, but that's in the past.
    Because we don't have dev access to Oracle we're unable to create a training database for this new software in house. We have to pay this company to create a test environment for us. I was told it would cost $500, until the tech said he was going to install Oracle on our training server.
    At this point I stopped him and said at $500 they'll either be breaching their licensing agreement, or giving us a free copy! The other possibility is that they were going to install this and then just bill us for Oracle later on, despite quoting the job at $500.
    The tech who was about to do the installation went to check with someone more senior and then returned to inform me that installing the second copy of Oracle would indeed require more licensing fees.
    This verified what I already had told him, and I said we want a training database on our existing Oracle server, and then training copies of the new software can just point to that training database.
    He now needs to take time with the more senior technicians while they're "analyzing the existing database server/environment". He was trying to talk me out of installing a training database on the existing server, and instead buying another copy of Oracle, which I believe to be a total cash grab. He had no solid reason why he couldn't do it, but refused to anyway and said he needs to talk to a more senior tech (the same one who said that yes, we'll need to purchase a second copy of Oracle rather than use a second database on the existing server).
    So, these two databases, one live data and one a duplicate of that live data used in a training environment where changes won't be reported against, should be able to exist peacefully should they not? The same version of the same software accessing the same data from the same server, just a different database, shouldn't present any problems with my limited knowledge of Oracle! There will only ever be maybe 5 connections to the training environment at a time, and the server should be able to currently handle twice as many users connected as it's current maximum (edit: expected) load.
    I know this wouldn't be a problem with MySQL, or MS SQL, and Oracle is a superior database package, so can anyone think of any legitimate reason that might back up the claim that having that duplicate database will be a problem?
    Thanks in advance for any guidance here!

    Thank you very much John!
    We have a per user license and I don't expect our training needs to exceed even a half dozen people at a time to start (A small, significant, fraction of the initial user base). In the future we can easily recommission other resources, or purchase more. The whole project is in the earlier stages anyway, so the needs are smaller now (but the money we spend on licensing could be recurring).
    I understand the requirements angle from a server perspective, but those points you brought up drill down into what I need to know a bit more.
    I doubt rollback segments would be necessary, I was thinking more along the lines of scheduled replication/duplication of the production database on a weekly or monthly basis, just to keep the material at least somewhat up to date.
    I also don't think temporary table space would put much load on storage either, at least in the long run.
    RAM isn't much an issue with a 64 bit version running either, for our needs now at least.
    My instinct, and what you mention about even potential impact of altering the existing database schema enforces this, is that it's basically safer to create a separate database, but less resource intensive to alter the schema of an existing Oracle database to suit training needs (in this situation, maybe, making some vague assumptions about software probably), if done correctly (although still carrying risks).
    I do wish I had the time to read up on this more now, and I will as soon as I have the time.
    I probably will download 10g express edition to familiarize myself a bit more now, as soon as I come up with an application for it, to at least try out whatever I read.
    Thanks for the advice

  • Cups software possible issue with headphones

    Im not even sure how to word this correctly, but I have a user who uses Bose headphones to listen to music online. This user also uses the Cups software to take calls from the 7942 IP Phone. What happens is when the user takes a call it will stop the music as it should, but when the call is over it doesnt go back to the music. Is there a setting in Call Manager or the software to check? Why wouldn't it go back to regular functions on the computer through the headphones? 

    I don't think On Screen Dispay is designed for W8.  I installed it but had to do with Compatibility settings but did not see a battery drain. 
    The intel management I disabled in BIOS and never install since I don't have a subscription to the service.
    Glad you solved the issue.

  • [SOLVED]Some issues with fresh arch install.

    I freshly installed arch after a pretty long period of time of using other distributions and forgot how many issues I have to deal with when using it.
    Alsamixer does not detect my headphones when i plug them in...(does not mute / unmute automatically speakers / headphones)
    And another issue with the xorg server i think, I have a notebook and after every reboot i have to look up after touchpad with xinput --list then   --setprop <id>. How can I make it permanent? It's annoying.
    Last edited by dede24ever (2014-12-27 22:11:08)

    Add a command to toggle the auto-mute with the same key, perhaps?
    Anyway, that command in my i3 set up does not effect the auto-mute mode so there may be something else going on in your system.
    Ooops -- my mistake, my system does that as well...
    Maybe something to do with pulseaudio -- I didn't have pulseaudio when I used i3 and I didn't notice that problem then.
    EDIT: It might be wise to open a fresh thread for this specific problem -- be sure to use a descriptive title to get the attention of the sound experts (not me!).
    Last edited by Head_on_a_Stick (2014-12-27 20:26:11)

  • [SOLVED] Touchpad issues with Eee 900A, only with Arch.

    Hi guys, posting here because I'm having a hard time tracking down this issue.
    I recently aquired an Eee PC 900A, which I have running the 2-09 arch build no prob, but I'm having one massively annoying issue with the touchpad under X.
    Whenever I lift my finger and replace it on the touchpad, at anything but super slow speed (and sometimes even then), the cursor will jump, an in or so back..
    Now I thought this might be a hardware issue, so I've tried booting into different distros (after trying tons of configs  for the synaptics driver in xorg.conf), and this dosen't occur in the Xandros distro that ships with the Eee, or in Eeebuntu..
    I'm pretty certain it's not a  config issue, Eeebuntu uses hal, I've tried using hal, and dozens of xorg.confs.. I've also tried the zen-eee kernel for the 1000/901's, which is older, and still has the same issue.
    So I'm sure this is a software issue, but I'm not sure which.. It even happens if I dont have the xf86-input-synaptics driver installed.. I'm not going to post my xorg.conf here, because it's irrelevant.. I've tried using tons, including the one that ships with xandros..they all change aspects of the synaptics driver, but none affect this issue.
    Anyone else having this issue? Fixes, suggestions?
    Thanks.
    Last edited by dissimilation (2009-03-03 14:11:31)

    hi guys,
    I had a similar bug on my netbook with the Elantech touchpad. I have reported a bug to the maintainer of the Elantech driver and I get a patch that fix it.
    description of my bug:
    with two fingers above the touchpad, tap alterrnatively with each finger on the touchpad.
    - expected behaviour: the cursor does not move.
    - actual behaviour: the cursor jumps sometimes to the left or the right.
    this only happens when configuring the touchpad with synaptics (by defaults, mine is detected as a mouse)
    is your bug the same than mine ?
    are you using both the proto=exps option and synaptics ? (I still have the bug in this configuration)
    if it is the same bug, I have submited the patched kernel to AUR

  • Possible Issue with Latest Office 2001 Update

    In the last few days my MB Air mid-2013 with Mavericks did an Office 2011 update to Version 14.3.9. Today I used it for the first time and Excel crashed each time I tried to use it. To get the job done I had to revert to the earlier build (version 14.3.8) from a backup and that appears to work normally.
    I don't know if this is an issue with Mavericks or if the update to 14.3.9 would have crashed with ML, too. Nor do I know if Word would have crashed since I had to get the task in Excel done before an appointment.
    Phil

    Apparently cannot edit the above. Title should have Office 2011, not Office 2001
    Phil

Maybe you are looking for