[SOLVED]s2ram leads to kernel panic

Hey guys, i recently experienced a problem when suspending using
# s2ram
, my laptop screen goes blank and the CAPSLOCK starts blinking (I assume it's a kernel panic). here's a log of my recent upgrade http://paste.pocoo.org/show/450909/
And my pm-suspend.log is http://paste.pocoo.org/show/450910/
Thanks in advance.
Wow, turns out virtualbox modules were the issue. Refer to these 2 posts if you experience the same thing
https://bbs.archlinux.org/viewtopic.php?id=122957
https://bbs.archlinux.org/viewtopic.php?id=122956
At the moment i shall disable these modules until a fix is submitted maybe on the next upgrade.
Last edited by kanine5 (2011-08-02 00:56:17)

Hello!
Just out of curiosity, how much free drive space does your PBook have? Open a Finder window, the info is displayed at the bottom. Anything less than 15% and an installer freezes or won't complete the installation.
You might want to check your drive for errors also. Run Disk Utility from your Tiger disk and click Verify. If there are errors, click Repair.
Click the Apple logo top left in your Menu, then click Software Updates. Make sure you system software is up to date.
Carolyn

Similar Messages

  • Time Machine Restore Leads to Kernel Panic and Time Machine Inaccuracies

    Last night I had to do a full restore from time machine because I had disturbed system files. So I boot in the OSX disk and run time machine from utilities to a time before I messed things up. After it finishes I restart as the screen prompts me to do and I get in a kernel panic restart cycle.
    So I reinstall snow leopard from the disk, and for some reason instead of being formatted everything appears as it did at the beginning of summer (I've had Snow Leopard since it came out). So I boot in the disk and try a time machine full restore to a different backup, and after it completes I again get into the kernel panic restart cycle.
    So I reinstall snow leopard to the same effect, thinking I'll just go into time machine (star wars interface) and manually update all the important files, but even though I have regular updates that run all the way to may, they are inaccurate. For instance: my downloads folder remains identical in all of them, even though it is altered almost daily, also my documents don't change: for instance an essay I'm working on doesn't contain changes which I made and through all of the time machine backups has not been modified since may 10th (quite wrong). But oddly, programs which I had installed recently remain on the computer.
    Disk Utility and Disk Warrior both report my internal hard drive and my external hard drive (where the time machine backups are stored in their own partition) are intact.
    All I want is data restoration, and none of my methods have worked.... if there is a workaround to my time machine kernel panic issue and time machine would give an accurate restoration then I would do this... hopefully some of you have ideas... Thanks.
    Running:
    Macbook 2.13 Ghz
    2 gb ram
    was running the most recent edition of Snow Leopard, after restore I'm running the original OSX 10.6

    You might try the following to repair permissions in your Home folder. Disk Utility does not repair permissions in the Home folder.
    To fix Home folder permissions
    Open the Terminal application in the Utilities folder. At the command line prompt enter or paste the following command line:
    sudo chown -R `id -un`:`id -gn` ~
    Press RETURN. You will be prompted to enter your admin password which will not be echoed.

  • [SOLVED] Windows/Arch UEFI--kernel panic at bootloader install?

    I've been trying for two days now to get a Windows/Arch dual boot going, UEFI style.   After HOURS of struggle (it's hell being a noob) I managed to get Windows 7 installed UEFI-style from a USB.  Arch install is fine until I get to the step that involves installing a bootloader, and everything turns to crap.
    Some kind of....I don't even know what.  Core dump??  A screen full of numbers & letters!
    With both rEFInd and gummiboot (haven't tried grub yet), I get the same result:
    http://imgur.com/XS6NxzV
    What the heck is going on?!
    Last edited by wilberfan (2014-04-20 02:38:13)

    Just INSTALLING gummiboot causes mass chaos:
    http://imgur.com/VWJNbvD
    There's a whole screen full of "call traces" and stuff...  UNINSTALLING gummiboot generates a metric ton of this stuff, too....
    [edit]  Something is SERIOUSLY borked in my system.  I've now gotten the identical (or very similar) result trying to install gummiboot, rEFInd, AND grub.  Some kind of kernel panic, or something...
    All of that screen verbage going by is WAY above my pay grade at this point...  :-/
    Last edited by wilberfan (2014-04-18 17:00:48)

  • Upgrade leads to kernel panic

    Hey I was doing a system upgrade that failed with a hang and an error about not being able to execute /sbin/mingetty which I don't remember exactly. When I rebooted I got
    EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
    switch_root: can't execute '/sbin/init': No such file or directory
    Kernel panic - not syncing: Attempted to kill init!
    Pid: 1, comm: switch_root Not tainted 2.6.36-ARCH #1
    Call Trace:
    I booted up with a rescue CD and pacman.log ends with Running 'pacman -Syu'; synchronizing package lists; starting full system upgrade; upgraded linux-api-headers (2.6.36.2-1 -> 2.6.37-1)
    That's it. When I try to chroot back into my regular setup according to the instructions at https://wiki.archlinux.org/index.php/Chroot, chroot complains that /bin/bash doesn't exist.
    Any ideas on where to go next to try and fix my borked upgrade?
    Patrick

    Well I can't get the system to boot but I took your advice and chroot'd in and ran pacman -Su. It finished and seemed to be happy. When I try and reboot now I get a kernel panic "No init found". I checked grub's menu.lst and found that the uuid was now wrong. I ran mkinitcpio -p kernel26 and put the correct uuids in grub/menu.lst. That didn't change anything so I added a init=/sbin/init to the kernel line in grub/menu.lst but now it just complains that it can't execute init or /sbin/init. Anyone have a clue of what to try next?
    Patrick

  • Can anyone help solve my forced reboot/Kernel panic situation?

    Dear mac users,
    Since 3 months I own my first macbook pro.
    Since some days, this happens: first the a transparent grey screen rolls down; then a grey box appears in which is written
    *You need to restart your computer. Hold down the Power button for several*
    *seconds or press the Restart button.*
    It happens quite regularly, the last time just after booting. There's no other choice but to switch off and reboot. The apple hardware test didn't reveal any problems.
    The problems started to occur after I applied the latest upgrades, and installed Parallels, in which I'm running Windows XP. The event however also occurs when Parallels is not running. I also freed up HD space, but to no result. After using the last major upgrade and rebooting, I noticed a one-time event of the screen seeming to darken forcing me to adjust brightness to the previous levels. The mouse pointer has disappeared and reappeared on one occasion.
    The last report seems to point to the USB drivers or bluetooth devise. Bluetooth and airport have both been switched off during the events. I might add that I have an external screen attached as I do a lot of photo editing.
    Any help will be grately appreciated! After finally abandoning windows, I thought my life would at last be free of trouble...
    This is the *last report*:
    Thu May 29 12:33:48 2008
    panic(cpu 1 caller 0x001A8CD4): Kernel trap at 0x0425fe00, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0xe0004050, CR3: 0x013da000, CR4: 0x00000660
    EAX: 0x0489fa00, EBX: 0xe0004051, ECX: 0x0489fa00, EDX: 0x0489f000
    CR2: 0xe0004050, EBP: 0x46e97c58, ESI: 0x46e97c70, EDI: 0x0457ec00
    EFL: 0x00010202, EIP: 0x0425fe00, CS: 0x00000008, DS: 0x04220010
    Error code: 0x00000002
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x46e97a58 : 0x12b0fa (0x459294 0x46e97a8c 0x133243 0x0)
    0x46e97aa8 : 0x1a8cd4 (0x4627fc 0x425fe00 0xe 0x461fac)
    0x46e97b88 : 0x19ede5 (0x46e97ba0 0x2e 0x46e97c58 0x425fe00)
    0x46e97b98 : 0x425fe00 (0xe 0x48 0x10 0x2e990010)
    0x46e97c58 : 0x97b86c (0x489fa00 0x46e97c70 0x97dfa8 0xe0004051)
    0x46e97d88 : 0x5973dd (0x489fa00 0x457ec00 0xe0004051 0x0)
    0x46e97df8 : 0x80338f (0x42d9000 0x487b500 0xe0004051 0x0)
    0x46e97e68 : 0x801c30 (0x42d9000 0x4770000 0xe0004051 0x4769040)
    0x46e97ec8 : 0x5938f7 (0x42d9000 0x3e8 0x46e97f08 0x139906)
    0x46e97f28 : 0x42313c (0x42d9000 0x4846d80 0x46e97f44 0x1398d6)
    0x46e97f78 : 0x13eb1d (0x4846d80 0x4831670 0x0 0x2e03)
    0x46e97fc8 : 0x19ebdc (0x0 0x0 0x1a20b5 0x41701c0)
    Backtrace terminated-invalid frame pointer 0
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleUSBBluetoothHCIController(2.1f17)@0x978000->0x97efff
    dependency: com.apple.iokit.IOBluetoothFamily(2.1f17)@0x941000
    dependency: com.apple.iokit.IOUSBFamily(3.1.5)@0x592000
    com.apple.driver.AppleUSBUHCI(3.1.5)@0x7fd000->0x80afff
    dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x5c1000
    dependency: com.apple.iokit.IOUSBFamily(3.1.5)@0x592000
    com.apple.iokit.IOUSBFamily(3.1.5)@0x592000->0x5b9fff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    9D34
    Kernel version:
    Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F4238BC8)
    System configuration:
    Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
    Graphics: GeForce 8600M GT, GeForce 8600M GT, spdisplayspciedevice, 256 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
    AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.5
    Bluetooth: Version 2.1.0f17, 2 service, 0 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Network Service: Parallels Host-Guest, Ethernet, en2
    Network Service: Parallels NAT, Ethernet, en3
    PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
    Serial ATA Device: FUJITSU MHW2160BHPL, 149,05 GB
    Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
    USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
    USB Device: USB2.0 Hub, high_speed, 500 mA
    USB Device: USB Keyboard, Chicony, low_speed, 500 mA
    USB Device: deskjet 3600, hp, full_speed, 500 mA
    USB Device: USB2.0 Hub, high_speed, 500 mA
    USB Device: Super Multi Rewriter, HLDS Inc., high_speed, 500 mA
    USB Device: Mass Storage Device, Generic, high_speed, 500 mA
    USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
    USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA
    USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
    USB Device: PHILIPS VOIP321, full_speed, 500 mA

    I doubt this is a permissions issue.
    Try unplugging your USB devices, see if the problem occurs again.
    I've had this happen when I tried to plugin a PHILIPS VOIP321 phone for attempted use over parallels. For some odd reason, the USB bus drivers of OS X just can't seem to recognize 2 VOIP phone thus far. The Philips VOIP321 and the Linksys CIT300 are both that I've tested and have never been able to get functioning.
    I saw you had USB Device: PHILIPS VOIP321, full_speed, 500 mA in your report, so may be the same issue.
    Thing is I find it odd that the USB Device was even named. I don't think my panic reports had that in it. Which leads me to believe that perhaps your issue is not the same as mine.
    has your VOIP321 functioned properly ever? if so, how?

  • Runaway RAM Usage leading to Kernel Panic using FilmConvert Plugin (updated x3)

    Hello, filed a bug report on this but cuious if anyone sees it.
    Late 2012 27 iMac, top line i7 with 680MX, 32 GB RAM.
    Promise R6 TB RAID.
    Trying to render out a 15 min edit from Premiere that has each clip with 3 filters on it - MB Looks, MB Colorista, Filmconvert.
    Since 7.01, every time I render previews or encode out, RAM use skyrockets way past the 25GB I allocated. I get up to a 50GB swap file in fact before the computer just craps out and I can't finish my render. (Nothing past 15 min anyway, I can do under that length ok.) As of this moment PPro Headless in Activity Monior has allocated 40GB and climbing....
    Any ideas?  Kind of a major issue. Does not happen on CS6 with same filters and similar project.
    PS - The same issue is happening with the same project on my Macbook Pro 15" retina with 16GB of RAM. It's creating a huge swap file. On the iMac with Fusion drive I can't complete the render at all due to the system SSD filling up on the Fusion drive. It eventually crashes and reboots. I can complete the render on the laptop, but it ends up with a 50+ GB swap file.
    UPDATE 1:
    I had my suspicions a Plugin I am using, the excellent (but now unusable for over 10 min projects) plugin "FilmConvert" was causing the issue on all my Macs.
    To prove it's the plugin, I removed duplicated my main 15 min sequence, removed the FilmConvert plugin from all clips while keeping the two Magic Bullet effects on. So, all filters (MB Looks, MB Colorista II) BUT filmConvert.
    Result?
    RAM usage stays where it should be (at the limit set in Premiere Pro CC) and there is zero swap file usage. Same project, same filters, same everything except FilmConvert was removed on this duplicate timeline.
    As it stands, the plugin is unusable for longer projects.  I'm still curious if anyone else has seen this, or if Adobe has any input.
    UPDATE 2: I developed a workaround workflow and the vendor wrote back and thinks it's a bug in PPro CC, but will try to see if they can't code around it:
    "We have had one other very recent report of this type of behaviour, but when rendering through the CC version
    of Adobe Media Encoder or Premiere (but not After Effects). I believe the issue is with Media Encoder / Premiere,
    although it's probably preventable within our plugin. The problem I believe is that Premiere and Media Encoder
    create many instances of the plugin during a  render, one instance per frame, and it seems in CC those instances
    do not get cleaned up until after the render finishes.
    As each plugin instance is expecting to be called many times, to render multiple frames, it keeps a certain amount
    of memory allocated, in order to gain a speed advantage."
    I am using the render previews workflow to deal with it for now. I set my sequence to my master codec (in this case ProRes 422 HQ, with maximum quality checked). Then I preview chunks of the timeline setting in/out, render. Then I quit the program, which frees up the RAM and the need for the swap file, which starts reducing itself. Then I run PPro again, and preview another chunk, and repeat the process until done.
    To export final piece, I just export using previews matching the sequence (which is ProRes 422 HQ) and it is a straight copy at that point and quick. This is a useful workflow if you are making tons of minor edits for a client anyway, as it vastly speeds up re-renders of the final file.  No loss in quality as the previews are the same as my final encode would be anyway.
    Still, it would be nice if Adobe/FilmConvert or both could fix this bug so I can just queue up a whole sequence and walk away without chunking it up if I need to.
    Update 3: If only Adobe could move so fast. Rubber Monkey sent me a new version to test today, and it fixed the problem. Amazing customer service!! It has not been released yet but I suspect it will be at some point. Case closed.

    Glad I'm not the only one. My temporary solution was to download the kernel and wl package from December 2012 found http://repo-ck.com/PKG_source/ and then mkpkg and install it. It'll work as an alternative for now, without messing up the primary kernel setup.

  • Can too much memory lead to a kernel panic on a MacBook Pro? specs 2.4GHz intel core i7 16GB DDR3 RAM   late2011..My laptop began suffering from kernel panics 3 mos ago first noticed using public wifi. Gone thru apple support all the way to engineers

    Can too much RAM memory in a late 2011 model macbook pro lead to kernel panic? That is what I was told by a senior supervisor from apple support who troubleshot this issue.First noticed this problem in Dec 2014 while using a private wifi at a relative's home. Did not occur again until Feb1 using a public wifi at a hotel. Never happened on my private wifi network until last night  attempting to use airplay. ( have used airplay before without issue). Late 2011 MacBook Pro running 10.9.5; 2.4 GHz Intel core i7, 16 GB DDR3,AMD Radeon HD 6770m 1024 MB graphic card.  The laptop came with 8GB RAM and I installed 8 GB about 2 years ago for some reason I cannot remember... probably because I thought the system was slowing down a little. I know that sounds silly. I do not run multiple programs at a time except I leave 6-8 website tabs open simultaneously. I don't photo or video edit.  I would describe my use as "light"  based on reading these blogs.I had purchased apple support and spent hours on the phone with them in early Feb moving up through support  and senior support to sending logs to the "engineers." Of course lots of things were done some of which I am sorry to report I cannot recall their technical definitions. Deleted  3rd party apps/programs; re-worked start up menu; re-installed operating system; reset " this, that and the other" using acrobatic simultaneous key strokes both in and out of safe mode..Anyway the results from the engineers came back and they suggested that if it happened again I was to remove the 8GB of RAM I had installed as the system was getting confused as to which chip to use.( that is my interpretation of what was said..prob dumbed down for me)...Anyway 1 day after these pronouncements came down I read that Apple had agreed to fix  graphics cards in some late model 2011 MBPs. I felt this was unlikely to be the issue  given all that had been done including an extended hardware test but called the Senior Support Supervisor I was working with to ask him to make sure. He never phoned me back. Should I go to the trouble of removing 8GB of RAM from my laptop? Of course I will try it as the alternative is a new computer.Blogs read that this model can support 16GB but Apple didn't test for it. Senior Supervisor claims this is my trouble.  Does that make sense?  Not to me....but it is clear to all my level of knowledge.  Can a malfunctioning graphics card be missed by an extended hardware test? I appreciate comments.

    The RAM needs specs as shown below.
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

  • Kernel Panics when running Photoshop

    I have a mid 2010 macbook pro that I recently purchased, refurbished.  I stupidly never thought to look at the system requirements to run Adobe Creative Cloud, and discovered that I do not have enough VRAM to run Creative Cloud.
    Unfortunately for me, having Photoshop is an absolute essential program.  I have an old version of PS5;  I have enabled it to run only 32 bit mode which I was hoping would solve the problem of Kernel panics, but my 3rd party plug-ins, that I use all the time don't load, and if I try to run other programs while in Photoshop, I get kernel panics anyway.
    I'm at a loss as to what to do;  it sounds like I'm maybe stuck selling this macbook so I can pay more money for a newer one that will have the necessary VRAM to run Photoshop. 
    My graphics cards are Intel HD Graphics 288mb and Nvidia Geforce GT330M 256 mb.  Thanks in advance for any assistance or suggestions. 

    Sun Nov  9 15:41:51 2014
    panic(cpu 0 caller 0xffffff7f8574cf7c): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811f010000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.6.22/src/Apple MuxControl/kext/GPUPanic.cpp:127
    Backtrace (CPU 0), Frame : Return Address
    0xffffff810d242ea0 : 0xffffff8003622f79
    0xffffff810d242f20 : 0xffffff7f8574cf7c
    0xffffff810d242ff0 : 0xffffff7f84026f1b
    0xffffff810d2430b0 : 0xffffff7f840f050a
    0xffffff810d2430f0 : 0xffffff7f840f057a
    0xffffff810d243160 : 0xffffff7f8436f056
    0xffffff810d243290 : 0xffffff7f84113ba9
    0xffffff810d2432b0 : 0xffffff7f8402d96d
    0xffffff810d243360 : 0xffffff7f8402b478
    0xffffff810d243560 : 0xffffff7f8402cdc7
    0xffffff810d243630 : 0xffffff7f84f923df
    0xffffff810d243700 : 0xffffff7f84fbc7b3
    0xffffff810d243780 : 0xffffff7f84fa4ae0
    0xffffff810d2437e0 : 0xffffff7f84fa53da
    0xffffff810d243830 : 0xffffff7f84fa5754
    0xffffff810d2438a0 : 0xffffff7f84fa5fc8
    0xffffff810d2438e0 : 0xffffff7f84f72fea
    0xffffff810d243a60 : 0xffffff7f84fa2940
    0xffffff810d243b20 : 0xffffff7f84f71ad9
    0xffffff810d243b70 : 0xffffff8003acf146
    0xffffff810d243b90 : 0xffffff8003ad0741
    0xffffff810d243bf0 : 0xffffff8003ace1af
    0xffffff810d243d40 : 0xffffff80036b6998
    0xffffff810d243e50 : 0xffffff8003626bc1
    0xffffff810d243e80 : 0xffffff80036139c5
    0xffffff810d243ef0 : 0xffffff800361e013
    0xffffff810d243f70 : 0xffffff80036c9b9d
    0xffffff810d243fb0 : 0xffffff80036f4196
          Kernel Extensions in backtrace:
             com.apple.driver.AppleMuxControl(3.6.22)[32862231-50BC-3AF6-87A2-703321AE4F90]@ 0xffffff7f8573e000->0xffffff7f85751fff
                dependency: com.apple.driver.AppleGraphicsControl(3.6.22)[AA46D551-BE0F-33DA-93A3-8F46197BB 36F]@0xffffff7f85736000
                dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f83f2c000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f83cbf000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f83f84000
                dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[80899285-3952-30DA-A0F9-357C51E104 CF]@0xffffff7f85739000
             com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f83fd7000->0xffffff7f8423ffff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f83cbf000
                dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f83fc7000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f83f84000
             com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f8424a000->0xffffff7f844f3fff
                dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f83fd7000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f83cbf000
             com.apple.GeForceTesla(8.2.4)[B0074750-2FC6-3E26-BEA0-5AD5469686CF]@0xffffff7f8 4f60000->0xffffff7f8502afff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[2852ACFE-FD28-3C37-9B39-885201BB8D25]@0xffffff 7f83cbf000
                dependency: com.apple.iokit.IONDRVSupport(2.4.1)[D41125CE-69BD-32E7-9B1D-4E83431662DD]@0xff ffff7f83fc7000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[75D81741-64C1-3941-ADFA-9D6B6C434EE4]@0 xffffff7f83f84000
                dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[D61B2BB9-4289-318D-9197-5E1E13B 1FF32]@0xffffff7f83fd7000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    13F34
    Kernel version:
    Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
    Kernel slide:     0x0000000003400000
    Kernel text base: 0xffffff8003600000
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 702735605578
    last loaded kext at 267486151141: com.apple.filesystems.msdosfs 1.9 (addr 0xffffff7f85a8b000, size 65536)
    last unloaded kext at 359867321413: com.apple.driver.AppleUSBCDC 4.2.1b5 (addr 0xffffff7f85a31000, size 16384)
    loaded kexts:
    com.apple.filesystems.ntfs 3.11
    com.apple.driver.AudioAUUC 1.60
    com.apple.driver.AppleHWSensor 1.9.5d0
    com.apple.driver.AGPM 100.14.34
    com.apple.driver.AppleMikeyHIDDriver 124
    com.apple.driver.AppleHDA 2.6.3f4
    com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
    com.apple.filesystems.autofs 3.0
    com.apple.driver.AppleMikeyDriver 2.6.3f4
    com.apple.iokit.IOUserEthernet 1.0.0d1
    com.apple.driver.AppleIntelHDGraphics 8.2.4
    com.apple.Dont_Steal_Mac_OS_X 7.0.0
    com.apple.driver.AppleHWAccess 1
    com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
    com.apple.driver.AppleIntelHDGraphicsFB 8.2.4
    com.apple.GeForceTesla 8.2.4
    com.apple.driver.AppleUpstreamUserClient 3.5.13
    com.apple.driver.AppleMuxControl 3.6.22
    com.apple.driver.AppleMCCSControl 1.2.5
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
    com.apple.driver.AppleSMCPDRC 1.0.0
    com.apple.driver.AppleSMCLMU 2.0.4d1
    com.apple.driver.AppleLPC 1.7.0
    com.apple.driver.SMCMotionSensor 3.0.4d1
    com.apple.driver.AppleUSBTCButtons 240.2
    com.apple.driver.AppleUSBTCKeyboard 240.2
    com.apple.driver.AppleIRController 325.7
    com.apple.driver.AppleUSBCardReader 3.4.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.iokit.SCSITaskUserClient 3.6.7
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage 2.6.0
    com.apple.driver.AppleUSBHub 683.4.0
    com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
    com.apple.driver.AirPort.Brcm4331 700.20.22
    com.apple.driver.AppleFWOHCI 5.0.2
    com.apple.driver.AppleAHCIPort 3.0.5
    com.apple.driver.AppleUSBEHCI 660.4.0
    com.apple.driver.AppleSmartBatteryManager 161.0.0
    com.apple.driver.AppleACPIButtons 2.0
    com.apple.driver.AppleRTC 2.0
    com.apple.driver.AppleHPET 1.8
    com.apple.driver.AppleSMBIOS 2.1
    com.apple.driver.AppleACPIEC 2.0
    com.apple.driver.AppleAPIC 1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
    com.apple.nke.applicationfirewall 153
    com.apple.security.quarantine 3
    com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
    com.apple.AppleGraphicsDeviceControl 3.6.22
    com.apple.driver.DspFuncLib 2.6.3f4
    com.apple.vecLib.kext 1.0.0
    com.apple.iokit.IOAudioFamily 1.9.7fc2
    com.apple.kext.OSvKernDSPLib 1.14
    com.apple.iokit.IOSerialFamily 10.0.7
    com.apple.kext.triggers 1.0
    com.apple.iokit.IOSurface 91.1
    com.apple.iokit.IOBluetoothFamily 4.2.7f3
    com.apple.iokit.IOFireWireIP 2.2.6
    com.apple.driver.AppleHDAController 2.6.3f4
    com.apple.iokit.IOHDAFamily 2.6.3f4
    com.apple.driver.AppleSMBusPCI 1.0.12d1
    com.apple.driver.IOPlatformPluginLegacy 1.0.0
    com.apple.nvidia.classic.NVDANV50HalTesla 8.2.4
    com.apple.nvidia.classic.NVDAResmanTesla 8.2.4
    com.apple.driver.AppleGraphicsControl 3.6.22
    com.apple.driver.AppleBacklightExpert 1.0.4
    com.apple.driver.AppleSMBusController 1.0.12d1
    com.apple.iokit.IONDRVSupport 2.4.1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
    com.apple.iokit.IOGraphicsFamily 2.4.1
    com.apple.driver.IOPlatformPluginFamily 5.7.1d6
    com.apple.driver.AppleSMC 3.1.8
    com.apple.driver.AppleUSBMultitouch 240.10
    com.apple.iokit.IOUSBHIDDriver 660.4.0
    com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.7
    com.apple.iokit.IOUSBMassStorageClass 3.6.0
    com.apple.driver.AppleUSBMergeNub 650.4.0
    com.apple.driver.AppleUSBComposite 656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily 1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.iokit.IOAHCISerialATAPI 2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
    com.apple.iokit.IOUSBUserClient 660.4.2
    com.apple.iokit.IOEthernetAVBController 1.0.3b4
    com.apple.driver.mDNSOffloadUserClient 1.0.1b5
    com.apple.iokit.IO80211Family 640.36
    com.apple.iokit.IONetworkingFamily 3.2
    com.apple.iokit.IOFireWireFamily 4.5.5
    com.apple.iokit.IOAHCIFamily 2.6.5
    com.apple.iokit.IOUSBFamily 686.4.1
    com.apple.driver.AppleEFINVRAM 2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.driver.AppleEFIRuntime 2.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.security.sandbox 278.11.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 7
    com.apple.driver.AppleKeyStore 2
    com.apple.driver.DiskImages 371.1
    com.apple.iokit.IOStorageFamily 1.9
    com.apple.iokit.IOReportFamily 23
    com.apple.driver.AppleFDEKeyStore 28.30
    com.apple.driver.AppleACPIPlatform 2.0
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily 1.4
    com.apple.kec.corecrypto 1.0
    com.apple.kec.pthread 1

  • Kernel panic and  freezing

    Can anyone help, in the past 4 months I have had two new logic boards fitted to try and solve the problem of kernel panics and , the message saying 'please restart your computer. now since the last repair 10 days ago it has now starting freezing on me.
    Apple not much help, saying take it back to be reapired again. would a reinstall of the OS solve the problem? and if I did would I lose data
    Thanks in advance for replies.

    I've responded to your other post as I hadn't seen this one - have a look there.
    Kernels are usually, but not inevitably, hardware related and RAM is the first suspect - but again it isn't the only suspect.
    Chesck the other thread. :-))

  • Kernel Panic and power off

    Hi all,
    I have now for a couple of days Kernel Panics and auto power off of my iMac G5!
    I have experienced KP in several occasions. Notably (can be reproduced) in iPhoto when I try to order prints online. The dialogue box pops up and then after 10 sec I have a KP!
    Also some KP when viewing clips with Quicktime (wmv with Flip4Mac as well as plain mov files!).
    Note that my software is up-to-date. I re-applied the combo Mac OSX 10.4.8 but that did not help.
    I did reset the MPU and now I even have the iMac powering off (actually crashing badly).
    For info, I have experienced KP at sleep mode since day 1! I rally fear an hardware issue.
    Question: how can I trouble-shoot Kernel Panics?
    PS: I have rebuilt the authorizations, no luck...
    Thanks

    Hi, Emilio.
    You wrote: "Although my Kernel Panic problem is not solved…"See my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics.
    My FAQ is a roadmap: start at the beginning and work through to the end, following the instruction in the order specified, including the "If all else fails..." section if a cause or resolution is not found in an earlier troubleshooting step therein.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • [SOLVED] Random kernel panics during boot (Waiting for UDev uevents..)

    Update 2012-03-31: Workaround confirmed to work, see tenthirteen's post.
    Update 2012-02-03: I've narrowed down the problem to the 3.x kernels. Downgrading to kernel26-2.6.38.5-1, with the other packages up-to-date (using nouveau instead of nvidia driver), solves the problem. Still, I still consider this a problem since it forces me to use an older kernel, so if anyone has any idea how to find the problem I would be very thankful!
    When I came back home after the summer vacations I did a huge upgrade with pacman -Syu (of course I read the announcements before). This included linux (3.0.3-1) from kernel26 (2.6.38.5-1) and udev (167-2 -> 173-3). After this point, the boot process randomly fails from time to time; today I had to restart more than 20 times before my machine would boot successfully.
    It always occurs during "Waiting for UDev uvents to be processed". Some of the errors are:
    1. The computer freezes when the message is shown (cursor stops to blink).
    2. Nothing happens for a long time, then Waiting for UDev uvents to be processed [ FAIL ]s.
    3. Short and long error messages that look similar to this guy's (except for the last line).
    I greped for some of the error messages in /var/log but they don't seem to be logged, so the examples below are from my handwritten notes and thus not very complete (there are a lot of other error messages except these lines). It's also possible that there are some mistakes. Note that they're from different boots.
    BUG: Soft lockup - CPU#1 stuck for 23 s! [modprobe:256]
    BUG: Unable to handle kernel
    --[End ...]--
    note: udevd[225] exited with preempt_count 2
    Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c0147299
    BUG: Unable to handle kernel paging request at f8d20076
    Code: Bad EIP value.
    EIP: ...
    CRZ: ...
    --[End ...]--
    Kernel panic - not syncing: Attempted to kill the idle task!
    Lock: Bad EIP value
    Note: modprobe [296] exited with preempt_count 3
    WARNING: at kernel/watchdog.c:240 watchdog-overflow-callback+0xac/...
    BUG: Unable to handle kernel NULL pointer dereference at 00000286
    BUG: Unable to handle kernel NULL pointer dereference at (null)
    These errors are seemingly arbitrary which makes it very hard to find the problem. Sometimes it works without a single complaint, sometimes it says something about "No caching mode page present, Assuming drive cache: write through", and sometimes I get different errors (the examples above are only from today!). As you can imagine, it gets pretty annoying.
    So far I've tried to:
    * Use the fallback mode - nope.
    * Rerun mkinitcpio -p linux - nope.
    * Append noapic and nomodeset to the kernel in GRUB - nope.
    * Install and try kernel26-lts - seems to work, although I don't understand what other differences there are (e.g., it doesn't start X). At least this seems to suggest that it's not a hardware problem.
    * Unplug all USB devices before boot - sometimes works, sometimes not. Doesn't seem to be a direct connection.
    * Remove my custom settings in /etc/modprobe.d - nope.
    * A lot of other things I've forgotten.
    Edit: I forgot to mention, once it's booted, the system works perfectly fine. No kernel panics etc. That's the second reason why I suspect it's not a hardware failure.
    I've been thinking about trying to downgrade the kernel and udev, but with the renaming and all dependencies I'm not sure how to do that.
    Since I've run out of ideas how to troubleshoot this issue, I would appreciate if I could get some suggestions here. I've search around and found similar posts but no solution that works for me.
    Finally, here are some more information.
    uname -a:
    Linux archon 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011 i686 Intel(R) Pentium(R) 4 CPU 2.60GHz GenuineIntel GNU/Linux
    The packages that I upgraded with pacman -Syu that day (removed most KDE packages from the list):
    [2011-08-26 15:14] Running 'pacman-color -Syu'
    [2011-08-26 15:14] synchronizing package lists
    [2011-08-26 15:18] Running 'pacman-color -Sy pacman'
    [2011-08-26 15:18] synchronizing package lists
    [2011-08-26 15:18] upgraded linux-api-headers (2.6.38.1-1 -> 3.0.1-1)
    [2011-08-26 15:19] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
    [2011-08-26 15:19] Generating locales...
    [2011-08-26 15:19] en_US.UTF-8... done
    [2011-08-26 15:19] en_US.ISO-8859-1... done
    [2011-08-26 15:19] sv_SE.UTF-8... done
    [2011-08-26 15:19] sv_SE.ISO-8859-1... done
    [2011-08-26 15:19] Generation complete.
    [2011-08-26 15:19] upgraded glibc (2.13-5 -> 2.14-5)
    [2011-08-26 15:19] upgraded pacman (3.5.3-1 -> 3.5.4-4)
    [2011-08-26 15:27] Running 'pacman-color -Syu'
    [2011-08-26 15:27] synchronizing package lists
    [2011-08-26 15:27] starting full system upgrade
    [2011-08-26 15:29] Running 'pacman-color -Syu'
    [2011-08-26 15:29] synchronizing package lists
    [2011-08-26 15:29] starting full system upgrade
    [2011-08-26 15:29] Running 'pacman-color -Rsn linuxwacom-bamboo-cth-ctl'
    [2011-08-26 15:29] removed linuxwacom-bamboo-cth-ctl (0.10.99.1-1)
    [2011-08-26 15:29] Running 'pacman-color -Syu'
    [2011-08-26 15:29] synchronizing package lists
    [2011-08-26 15:29] starting full system upgrade
    [2011-08-26 15:29] Running 'pacman-color -Syu'
    [2011-08-26 15:29] synchronizing package lists
    [2011-08-26 15:29] starting full system upgrade
    [2011-08-26 15:53] Running 'pacman-color -Syu'
    [2011-08-26 15:53] synchronizing package lists
    [2011-08-26 15:54] starting full system upgrade
    [2011-08-26 16:03] warning: /etc/krb5.conf saved as /etc/krb5.conf.pacsave
    [2011-08-26 16:03] removed heimdal (1.3.3-4)
    [2011-08-26 16:03] removed eigen (2.0.15-1)
    [2011-08-26 16:03] removed python2-qt (4.8.3-1)
    [2011-08-26 16:03] removed kernel26 (2.6.38.5-1)
    [2011-08-26 16:04] removed kernel26-headers (2.6.38.5-1)
    [2011-08-26 16:04] removed libreoffice (3.3.2-2)
    [2011-08-26 16:04] upgraded readline (6.2.001-1 -> 6.2.001-2)
    [2011-08-26 16:04] upgraded bash (4.2.008-1 -> 4.2.010-1)
    [2011-08-26 16:04] upgraded attr (2.4.44-3 -> 2.4.46-1)
    [2011-08-26 16:04] upgraded acl (2.2.49-2 -> 2.2.51-1)
    [2011-08-26 16:04] upgraded rsync (3.0.8-1 -> 3.0.8-2)
    [2011-08-26 16:04] upgraded abs (2.4.2-1 -> 2.4.3-1)
    [2011-08-26 16:04] upgraded gcc-libs (4.6.0-4 -> 4.6.1-3)
    [2011-08-26 16:04] upgraded zlib (1.2.5-3 -> 1.2.5-4)
    [2011-08-26 16:04] upgraded icu (4.6.1-1 -> 4.8.1-1)
    [2011-08-26 16:04] upgraded boost-libs (1.46.0-4 -> 1.47.0-1)
    [2011-08-26 16:04] upgraded libmysqlclient (5.5.11-1 -> 5.5.15-1)
    [2011-08-26 16:04] upgraded mysql-clients (5.5.11-1 -> 5.5.15-1)
    [2011-08-26 16:04] hostname and {,yp,nis}domainname has moved:
    [2011-08-26 16:04] ----------
    [2011-08-26 16:04] hostname is now in coreutils
    [2011-08-26 16:04] domainname is now in yp-tools
    [2011-08-26 16:04] their functionality might have changed slightly
    [2011-08-26 16:04]
    [2011-08-26 16:04] dnsdomainname remains in net-tools
    [2011-08-26 16:04] ----------
    [2011-08-26 16:04] upgraded net-tools (1.60-14 -> 1.60-18)
    [2011-08-26 16:04] warning: directory permissions differ on var/lib/mysql/
    filesystem: 755 package: 700
    [2011-08-26 16:04] upgraded mysql (5.5.11-1 -> 5.5.15-1)
    [2011-08-26 16:04] upgraded libpng (1.4.5-1 -> 1.4.8-1)
    [2011-08-26 16:04] upgraded sqlite3 (3.7.6.1-1 -> 3.7.7.1-1)
    [2011-08-26 16:04] upgraded run-parts (3.4.1-1 -> 3.4.4-1)
    [2011-08-26 16:04] upgraded db (5.1.25-1 -> 5.2.28-1)
    [2011-08-26 16:04] installed libgssglue (0.3-1)
    [2011-08-26 16:04] installed libtirpc (0.2.2-2)
    [2011-08-26 16:04] upgraded pam (1.1.3-1 -> 1.1.4-1)
    [2011-08-26 16:04] Fixing gshadow file ...
    [2011-08-26 16:04] upgraded shadow (4.1.4.3-1 -> 4.1.4.3-2)
    [2011-08-26 16:04] upgraded gmp (5.0.1-2 -> 5.0.2-3)
    [2011-08-26 16:04] upgraded libcap (2.20-1 -> 2.22-1)
    [2011-08-26 16:04] upgraded coreutils (8.12-1 -> 8.12-3)
    [2011-08-26 16:04] Updating certificates. This might take a while...
    [2011-08-26 16:04] upgraded ca-certificates (20090814+nmu2-1 -> 20110421-3)
    [2011-08-26 16:04] upgraded pcre (8.12-1 -> 8.13-2)
    [2011-08-26 16:04] upgraded glib2 (2.28.6-1 -> 2.28.8-1)
    [2011-08-26 16:04] upgraded iana-etc (2.30-1 -> 2.30-2)
    [2011-08-26 16:04] warning: /etc/fstab installed as /etc/fstab.pacnew
    [2011-08-26 16:04] warning: directory permissions differ on run/
    filesystem: 1777 package: 755
    [2011-08-26 16:04] upgraded filesystem (2011.04-1 -> 2011.08-1)
    [2011-08-26 16:04] upgraded dbus-core (1.4.1-1 -> 1.4.14-1)
    [2011-08-26 16:04] upgraded xproto (7.0.21-1 -> 7.0.22-1)
    [2011-08-26 16:04] upgraded libx11 (1.4.3-2 -> 1.4.4-1)
    [2011-08-26 16:05] upgraded dbus (1.4.1-1 -> 1.4.14-1)
    [2011-08-26 16:05] upgraded freetype2 (2.4.4-2 -> 2.4.6-1)
    [2011-08-26 16:05] upgraded libxfont (1.4.3-1 -> 1.4.4-1)
    [2011-08-26 16:05] upgraded util-linux (2.19-4 -> 2.19.1-3)
    [2011-08-26 16:05] upgraded module-init-tools (3.12-2 -> 3.16-1)
    [2011-08-26 16:05] ATTENTION UDEV:
    [2011-08-26 16:05] ----------
    [2011-08-26 16:05] Kernel 2.6.32 or newer is now required.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] OSS emulation modules are not loaded by default, add to rc.conf if needed.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] Arch specific cd symlinks are now no longer created.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] cd and net persistent rules will no longer be autogenerated,
    [2011-08-26 16:05] see <https://wiki.archlinux.org/index.php/Udev> for details.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] Errors are now logged (possibly to the console) by default.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] Arch's custom blacklisting logic has been removed. MOD_AUTOLOAD and
    [2011-08-26 16:05] blacklisting in MODULES no longer works.
    [2011-08-26 16:05] See 'man modprobe.conf' for a replacement to blacklisting.
    [2011-08-26 16:05] To disable a module mod1 on the kernel command line, use
    [2011-08-26 16:05] mod1.disable=1
    [2011-08-26 16:05] or
    [2011-08-26 16:05] modprobe.blacklist=mod1
    [2011-08-26 16:05] --
    [2011-08-26 16:05] The following modules are no longer unconditionally loaded:
    [2011-08-26 16:05] pcspkr irtty-sir analog lp ppdev ide-generic
    [2011-08-26 16:05] Add them to MODULES in rc.conf if you need them.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] Support for non-devtmpfs self-compiled kernels have been moved to udev-compat.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] Blacklisting of framebuffer devices has moved from /etc/modprobe.d to
    [2011-08-26 16:05] /lib/modprobe.d. Any customizations shoud be done to the file in /etc, as it
    [2011-08-26 16:05] takes precedence.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] kbd and rtc devices are no longer world readable.
    [2011-08-26 16:05] --
    [2011-08-26 16:05] rtc is no longer in the audio group and fb devices are no longer in
    [2011-08-26 16:05] the video group, as permissions and ownership of fb devices are controlled
    [2011-08-26 16:05] by X.
    [2011-08-26 16:05] ---------------
    [2011-08-26 16:05] upgraded udev (167-2 -> 173-3)
    [2011-08-26 16:05] upgraded libdrm (2.4.25-1 -> 2.4.26-1)
    [2011-08-26 16:05] upgraded pixman (0.20.2-1 -> 0.22.2-1)
    [2011-08-26 16:05] upgraded libgpg-error (1.9-3 -> 1.10-1)
    [2011-08-26 16:05] upgraded libgcrypt (1.4.6-3 -> 1.5.0-1)
    [2011-08-26 16:05] upgraded xorg-xkbcomp (1.2.1-2 -> 1.2.3-1)
    [2011-08-26 16:05] upgraded xorg-server-common (1.10.1-1 -> 1.10.3.901-1)
    [2011-08-26 16:05] upgraded xorg-server (1.10.1-1 -> 1.10.3.901-1)
    [2011-08-26 16:05] upgraded nvidia-173xx-utils (173.14.30-1 -> 173.14.31-1)
    [2011-08-26 16:05] upgraded libxext (1.2.0-1 -> 1.3.0-1)
    [2011-08-26 16:05] upgraded libxrandr (1.3.1-1 -> 1.3.2-1)
    [2011-08-26 16:05] upgraded inputproto (2.0.1-1 -> 2.0.2-1)
    [2011-08-26 16:05] upgraded libxi (1.4.2-1 -> 1.4.3-1)
    [2011-08-26 16:05] upgraded xorg-xset (1.2.1-2 -> 1.2.2-1)
    [2011-08-26 16:05] upgraded xdg-utils (1.1.0rc1-2 -> 1.1.0rc1-3)
    [2011-08-26 16:05] upgraded qt (4.7.2-6 -> 4.7.3-3)
    [2011-08-26 16:05] installed libssh2 (1.2.9-1)
    [2011-08-26 16:05] upgraded curl (7.21.6-1 -> 7.21.7-1)
    [2011-08-26 16:05] upgraded raptor (2.0.2-1 -> 2.0.4-1)
    [2011-08-26 16:05] upgraded mpfr (3.0.1-1 -> 3.0.1.p4-2)
    [2011-08-26 16:05] upgraded rasqal (1:0.9.21-1 -> 1:0.9.27-1)
    [2011-08-26 16:05] upgraded binutils (2.21-7 -> 2.21.1-2)
    [2011-08-26 16:05] upgraded libmpc (0.9-1 -> 0.9-2)
    [2011-08-26 16:05] upgraded isl (0.06-1 -> 0.06-2)
    [2011-08-26 16:05] upgraded cloog (0.16.2-1 -> 0.16.2-2)
    [2011-08-26 16:05] upgraded ppl (0.11.2-1 -> 0.11.2-2)
    [2011-08-26 16:05] upgraded gcc (4.6.0-4 -> 4.6.1-3)
    [2011-08-26 16:05] upgraded libtool (2.4-3 -> 2.4-4)
    [2011-08-26 16:05] upgraded redland (1:1.0.12-1 -> 1:1.0.14-1)
    [2011-08-26 16:05] upgraded redland-storage-virtuoso (1:1.0.12-1 -> 1:1.0.14-1)
    [2011-08-26 16:05] upgraded soprano (2.6.0-5 -> 2.7.0-1)
    [2011-08-26 16:05] upgraded akonadi (1.5.2-1 -> 1.6.0-2)
    [2011-08-26 16:05] upgraded dialog (1.1_20110302-1 -> 1.1_20110707-1)
    [2011-08-26 16:05] upgraded psmisc (22.13-1 -> 22.14-1)
    [2011-08-26 16:05] upgraded alsa-utils (1.0.24.2-1 -> 1.0.24.2-3)
    [2011-08-26 16:06] upgraded exiv2 (0.21.1-1 -> 0.21.1-2)
    [2011-08-26 16:06] upgraded strigi (git20110405-1 -> 0.7.5-4)
    [2011-08-26 16:06] upgraded xz (5.0.2-1 -> 5.0.3-1)
    [2011-08-26 16:06] upgraded libsasl (2.1.23-5 -> 2.1.23-7)
    [2011-08-26 16:06] upgraded libldap (2.4.24-1 -> 2.4.26-3)
    [2011-08-26 16:06] upgraded keyutils (1.4-1 -> 1.5.2-1)
    [2011-08-26 16:06] installed krb5 (1.9.1-3)
    [2011-08-26 16:06] upgraded shared-desktop-ontologies (0.6.0-1 -> 0.7.1-1)
    [2011-08-26 16:06] upgraded libdbusmenu-qt (0.8.2-1 -> 0.8.3-1)
    [2011-08-26 16:06] upgraded grantlee (0.1.8-1 -> 0.1.9-1)
    [2011-08-26 16:06] upgraded aspell (0.60.6-5 -> 0.60.6.1-1)
    [2011-08-26 16:06] upgraded dbus-glib (0.92-1 -> 0.94-2)
    [2011-08-26 16:06] upgraded hunspell (1.2.15-1 -> 1.3.2-1)
    [2011-08-26 16:06] upgraded enchant (1.6.0-1 -> 1.6.0-3)
    [2011-08-26 16:06] upgraded libogg (1.2.2-1 -> 1.3.0-1)
    [2011-08-26 16:06] upgraded flac (1.2.1-2 -> 1.2.1-3)
    [2011-08-26 16:06] upgraded libsndfile (1.0.24-1 -> 1.0.25-1)
    [2011-08-26 16:06] upgraded libpulse (0.9.22-2 -> 0.9.23-1)
    [2011-08-26 16:06] installed libqzeitgeist (0.7.0-1)
    [2011-08-26 16:06] upgraded pango (1.28.4-2 -> 1.28.4-3)
    [2011-08-26 16:06] upgraded gstreamer0.10 (0.10.32-1 -> 0.10.35-1)
    [2011-08-26 16:06] upgraded gstreamer0.10-base (0.10.32-4 -> 0.10.35-1)
    [2011-08-26 16:06] upgraded gstreamer0.10-base-plugins (0.10.32-4 -> 0.10.35-1)
    [2011-08-26 16:06] upgraded phonon-gstreamer (4.5.0-1 -> 4.5.1-1)
    [2011-08-26 16:06] upgraded sdl (1.2.14-6 -> 1.2.14-7)
    [2011-08-26 16:06] upgraded xvidcore (1.3.1-1 -> 1.3.2-1)
    [2011-08-26 16:06] upgraded x264 (20110327-1 -> 20110617-1)
    [2011-08-26 16:06] upgraded libvpx (0.9.6-2 -> 0.9.7.p1-1)
    [2011-08-26 16:06] upgraded libva (1.0.12-1 -> 1.0.14-1)
    [2011-08-26 16:06] installed rtmpdump (2.4-1)
    [2011-08-26 16:06] upgraded ffmpeg (20110330-1 -> 20110724-1)
    [2011-08-26 16:06] upgraded cifs-utils (4.9-2 -> 4.9-3)
    [2011-08-26 16:06] upgraded smbclient (3.5.8-2 -> 3.6.0-4)
    [2011-08-26 16:06] upgraded mesa (7.10.2-2 -> 7.11-1)
    [2011-08-26 16:06] upgraded libsamplerate (0.1.7-1 -> 0.1.8-1)
    [2011-08-26 16:06] upgraded jack (0.120.1-1 -> 0.121.2-2)
    [2011-08-26 16:06] upgraded fluidsynth (1.1.3-2 -> 1.1.4-1)
    [2011-08-26 16:06] upgraded libass (0.9.11-1 -> 0.9.13-1)
    [2011-08-26 16:06] upgraded libproxy (0.4.6-6 -> 0.4.7-1)
    [2011-08-26 16:06] upgraded libjpeg-turbo (1.1.0-1 -> 1.1.1-3)
    [2011-08-26 16:06] upgraded v4l-utils (0.8.3-1 -> 0.8.5-1)
    [2011-08-26 16:06] upgraded taglib (1.7-1 -> 1.7-3)
    [2011-08-26 16:06] upgraded libdvbpsi (0.1.7-1 -> 0.2.0-1)
    [2011-08-26 16:06] upgraded libebml (1.2.0-1 -> 1.2.1-1)
    [2011-08-26 16:06] upgraded libmatroska (1.1.0-1 -> 1.2.0-1)
    [2011-08-26 16:06] upgraded libmodplug (0.8.8.1-1 -> 0.8.8.3-1)
    [2011-08-26 16:06] upgraded libmpeg2 (0.5.1-1 -> 0.5.1-3)
    [2011-08-26 16:06] upgraded libmtp (1.0.2-2 -> 1.1.0-1)
    [2011-08-26 16:06] installed libupnp (1.6.13-1)
    [2011-08-26 16:06] upgraded vlc (1.1.9-1 -> 1.1.11-4)
    [2011-08-26 16:06] upgraded phonon-vlc (0.4.0-1 -> 0.4.1-1)
    [2011-08-26 16:06] upgraded phonon (4.5.0-1 -> 4.5.55-1)
    [2011-08-26 16:06] upgraded upower (0.9.10-1 -> 0.9.12-1)
    [2011-08-26 16:07] upgraded device-mapper (2.02.84-1 -> 2.02.88-1)
    [2011-08-26 16:07] upgraded parted (2.3-1 -> 3.0-3)
    [2011-08-26 16:07] upgraded lvm2 (2.02.84-1 -> 2.02.88-1)
    [2011-08-26 16:07] upgraded eject (2.1.5-5 -> 2.1.5-7)
    [2011-08-26 16:07] upgraded udisks (1.0.3-2 -> 1.0.3-6)
    [2011-08-26 16:07] upgraded libxcursor (1.1.11-1 -> 1.1.12-1)
    [2011-08-26 16:07] upgraded ntrack (1:13-1 -> 1:13-2)
    [2011-08-26 16:07] upgraded libssh (0.4.8-1 -> 0.5.1-1)
    [2011-08-26 16:07] upgraded oxygen-icons (4.6.2-1 -> 4.7.0-1)
    [2011-08-26 16:07] upgraded xorg-xauth (1.0.5-2 -> 1.0.6-1)
    [2011-08-26 16:07] installed qjson (0.7.1-1)
    [2011-08-26 16:08] upgraded amarok (2.4.0-4 -> 2.4.3-1)
    [2011-08-26 16:08] upgraded apr (1.4.2-1 -> 1.4.5-1)
    [2011-08-26 16:08] upgraded apr-util (1.3.10-2 -> 1.3.12-2)
    [2011-08-26 16:08] upgraded atk (2.0.0-1 -> 2.0.1-1)
    [2011-08-26 16:08] upgraded avahi (0.6.30-2 -> 0.6.30-4)
    [2011-08-26 16:08] installed eigen2 (2.0.16-1)
    [2011-08-26 16:08] upgraded libffi (3.0.9-1 -> 3.0.10-1)
    [2011-08-26 16:08] upgraded python (3.2-2 -> 3.2.1-1)
    [2011-08-26 16:08] installed sip (4.12.4-1)
    [2011-08-26 16:08] installed pyqt (4.8.5-1)
    [2011-08-26 16:08] upgraded python2 (2.7.1-9 -> 2.7.2-2)
    [2011-08-26 16:08] upgraded python2-sip (4.12.1-1 -> 4.12.4-1)
    [2011-08-26 16:08] upgraded dbus-python (0.83.1-2 -> 0.84.0-1)
    [2011-08-26 16:08] installed python2-pyqt (4.8.5-1)
    [2011-08-26 16:08] upgraded glew (1.5.8-1 -> 1.6.0-1)
    [2011-08-26 16:08] upgraded blas (3.3.0-2 -> 3.3.1-2)
    [2011-08-26 16:08] upgraded lapack (3.3.0-2 -> 3.3.1-2)
    [2011-08-26 16:08] upgraded python2-numpy (1.5.1-2 -> 1.6.0-1)
    [2011-08-26 16:08] upgraded avogadro (1.0.3-1 -> 1.0.3-3)
    [2011-08-26 16:08] upgraded bison (2.4.3-1 -> 2.5-1)
    [2011-08-26 16:08] upgraded bluez (4.93-1 -> 4.96-1)
    [2011-08-26 16:08] upgraded boost (1.46.0-4 -> 1.47.0-1)
    [2011-08-26 16:08] upgraded cabextract (1.3-1 -> 1.4-1)
    [2011-08-26 16:08] upgraded libsigc++ (2.2.9-1 -> 2.2.10-1)
    [2011-08-26 16:08] upgraded cairomm (1.9.8-1 -> 1.10.0-1)
    [2011-08-26 16:08] upgraded chmlib (0.40-1 -> 0.40-2)
    [2011-08-26 16:08] installed nettle (2.2-1)
    [2011-08-26 16:08] upgraded gnutls (2.12.3-1 -> 3.0.1-1)
    [2011-08-26 16:08] upgraded libcups (1.4.6-1 -> 1.4.8-2)
    [2011-08-26 16:08] upgraded gdk-pixbuf2 (2.23.3-1 -> 2.23.5-1)
    [2011-08-26 16:08] upgraded gtk-update-icon-cache (2.24.4-1 -> 2.24.5-3)
    [2011-08-26 16:08] upgraded gtk2 (2.24.4-1 -> 2.24.5-3)
    [2011-08-26 16:09] upgraded nspr (4.8.7-1 -> 4.8.9-1)
    [2011-08-26 16:09] upgraded nss (3.12.9-1 -> 3.12.11-1)
    [2011-08-26 16:09] upgraded libevent (2.0.10-1 -> 2.0.12-1)
    [2011-08-26 16:09] upgraded xorg-mkfontscale (1.0.8-1 -> 1.0.9-1)
    [2011-08-26 16:10] upgraded ttf-dejavu (2.32-2 -> 2.33-1)
    [2011-08-26 16:10] upgraded chromium (11.0.696.57-1 -> 13.0.782.215-1)
    [2011-08-26 16:10] upgraded cln (1.3.1-1 -> 1.3.2-1)
    [2011-08-26 16:10] upgraded clucene (0.9.21b-1 -> 2.3.3.4-1)
    [2011-08-26 16:11] upgraded cmake (2.8.4-1 -> 2.8.5-1)
    [2011-08-26 16:11] upgraded consolekit (0.4.4-1 -> 0.4.5-1)
    [2011-08-26 16:11] upgraded cryptsetup (1.2.0-1 -> 1.3.1-2)
    [2011-08-26 16:11] upgraded poppler (0.16.4-1 -> 0.16.7-1)
    [2011-08-26 16:11] daemon script has been renamed to /etc/rc.d/cupsd
    [2011-08-26 16:11] change your entry in /etc/rc.conf
    [2011-08-26 16:11] upgraded cups (1.4.6-1 -> 1.4.8-2)
    [2011-08-26 16:11] upgraded cvs (1.11.23-6 -> 1.11.23-7)
    [2011-08-26 16:11] upgraded dash (0.5.6.1-2 -> 0.5.7-2)
    [2011-08-26 16:11] upgraded dconf (0.7.3-2 -> 0.8.0-1)
    [2011-08-26 16:11] upgraded dcron (4.4-2 -> 4.5-2)
    [2011-08-26 16:11] upgraded diffutils (3.0-2 -> 3.1-1)
    [2011-08-26 16:11] upgraded libksba (1.0.8-1 -> 1.2.0-1)
    [2011-08-26 16:11] upgraded libassuan (2.0.1-1 -> 2.0.2-1)
    [2011-08-26 16:11] upgraded dirmngr (1.1.0-1 -> 1.1.0-3)
    [2011-08-26 16:11] upgraded dri2proto (2.3-1 -> 2.6-1)
    [2011-08-26 16:11] upgraded fakeroot (1.15.1-1 -> 1.17-1)
    [2011-08-26 16:11] upgraded file (5.06-1 -> 5.08-1)
    [2011-08-26 16:11] upgraded startup-notification (0.10-2 -> 0.12-1)
    [2011-08-26 16:11] upgraded mime-types (1.0-3 -> 8-1)
    [2011-08-26 16:11] upgraded libnotify (0.7.2-1 -> 0.7.3-1)
    [2011-08-26 16:11] upgraded firefox (4.0.1-1 -> 6.0-1)
    [2011-08-26 16:11] upgraded flashplugin (10.2.159.1-2 -> 10.3.183.7-1)
    [2011-08-26 16:11] - The directories /usr/lib/perl5/current, /usr/lib/perl5/site_perl/current,
    [2011-08-26 16:11] /usr/lib/perl5/site_perl/5.10.1, and /usr/share/perl5/site_perl/5.10.1
    [2011-08-26 16:11] have been removed from @INC.
    [2011-08-26 16:11] - The script/binary directories are now /usr/bin/*_perl instead of
    [2011-08-26 16:11] /usr/lib/perl5/*_perl/bin which will be eventually removed.
    [2011-08-26 16:11] upgraded perl (5.12.3-1 -> 5.14.1-3)
    [2011-08-26 16:11] upgraded foomatic-db (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
    [2011-08-26 16:11] upgraded foomatic-filters (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
    [2011-08-26 16:11] upgraded foomatic-db-engine (4.0.6_20101215-1 -> 1:4.0.7_20110707-1)
    [2011-08-26 16:11] upgraded fortune-mod (1.99.1-4 -> 1.99.1-5)
    [2011-08-26 16:12] upgraded fpc (2.4.2-1 -> 2.4.4-3)
    [2011-08-26 16:12] upgraded gawk (3.1.8-2 -> 4.0.0-1)
    [2011-08-26 16:12] upgraded gc (7.1-1 -> 7.1-3)
    [2011-08-26 16:12] upgraded gcc-fortran (4.6.0-4 -> 4.6.1-3)
    [2011-08-26 16:12] upgraded gdb (7.2-2 -> 7.3-2)
    [2011-08-26 16:12] upgraded libftdi (0.18-2 -> 0.19-1)
    [2011-08-26 16:12] upgraded lirc-utils (1:0.9.0-2 -> 1:0.9.0-6)
    [2011-08-26 16:12] installed mpg123 (1.13.3-2)
    [2011-08-26 16:12] upgraded mplayer (33159-1 -> 34007-1)
    [2011-08-26 16:12] upgraded gnome-mplayer (1.0.3-1 -> 1.0.4-1)
    [2011-08-26 16:12] upgraded gecko-mediaplayer (1.0.3-1 -> 1.0.4-1)
    [2011-08-26 16:12] upgraded libggz (0.0.14.1-1 -> 0.0.14.1-2)
    [2011-08-26 16:12] upgraded ggz-client-libs (0.0.14.1-1 -> 0.0.14.1-2)
    [2011-08-26 16:12] upgraded ghostscript (9.02-1 -> 9.04-5)
    [2011-08-26 16:12] upgraded pygobject-devel (2.28.4-1 -> 2.28.6-1)
    [2011-08-26 16:12] upgraded pygobject (2.28.4-1 -> 2.28.6-1)
    [2011-08-26 16:12] upgraded pygtk (2.24.0-1 -> 2.24.0-2)
    [2011-08-26 16:12] upgraded gimp (2.6.11-5 -> 2.6.11-6)
    [2011-08-26 16:12] upgraded git (1.7.5-1 -> 1.7.6.1-1)
    [2011-08-26 16:12] upgraded glibmm (2.28.0-1 -> 2.28.2-1)
    [2011-08-26 16:12] upgraded glib-networking (2.28.6.1-2 -> 2.28.7-4)
    [2011-08-26 16:12] upgraded glproto (1.4.12-1 -> 1.4.14-1)
    [2011-08-26 16:12] upgraded gnugo (3.8-1 -> 3.8-2)
    [2011-08-26 16:12] upgraded gnupg (1.4.11-2 -> 1.4.11-3)
    [2011-08-26 16:12] upgraded pinentry (0.8.1-1 -> 0.8.1-3)
    [2011-08-26 16:12] upgraded gnupg2 (2.0.17-1 -> 2.0.18-1)
    [2011-08-26 16:12] upgraded wxgtk (2.8.12-1 -> 2.8.12.1-1)
    [2011-08-26 16:12] ==> To add the gnuplot mode in Emacs, add the content of /usr/share/emacs/site-lisp/dotemacs to your ~/.emacs file.
    [2011-08-26 16:12] Updating TeX tree...
    [2011-08-26 16:12] mktexlsr: Updating /etc/texmf/ls-R...
    [2011-08-26 16:12] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2011-08-26 16:12] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2011-08-26 16:13] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2011-08-26 16:13] mktexlsr: Done.
    [2011-08-26 16:13] upgraded gnuplot (4.4.2-2 -> 4.4.3-1)
    [2011-08-26 16:13] upgraded gtkmm (2.24.0-1 -> 2.24.2-1)
    [2011-08-26 16:13] upgraded gparted (0.8.0-2 -> 0.9.0-3)
    [2011-08-26 16:13] upgraded gpgme (1.3.0-1 -> 1.3.1-1)
    [2011-08-26 16:13] upgraded gpsd (2.96-1 -> 3.0-3)
    [2011-08-26 16:13] upgraded graphicsmagick (1.3.12-1 -> 1.3.12-2)
    [2011-08-26 16:13] upgraded grep (2.7-1 -> 2.9-1)
    [2011-08-26 16:13] warning: /boot/grub/menu.lst installed as /boot/grub/menu.lst.pacnew
    [2011-08-26 16:13] upgraded grub (0.97-17 -> 0.97-20)
    [2011-08-26 16:13] upgraded gsl (1.14-1 -> 1.15-1)
    [2011-08-26 16:13] upgraded vim-runtime (7.3.138-1 -> 7.3.266-1)
    [2011-08-26 16:13] upgraded ruby (1.9.2_p180-1 -> 1.9.2_p290-1)
    [2011-08-26 16:13] Updating desktop and mime database...done.
    [2011-08-26 16:13] upgraded gvim (7.3.138-1 -> 7.3.266-1)
    [2011-08-26 16:13] upgraded hdf5 (1.8.6-1 -> 1.8.7-1)
    [2011-08-26 16:13] upgraded heirloom-mailx (12.5-1 -> 12.5-2)
    [2011-08-26 16:13] upgraded htop (0.9-1 -> 0.9-2)
    [2011-08-26 16:13] installed lcms2 (2.2-1)
    [2011-08-26 16:13] upgraded imagemagick (6.6.9.4-1 -> 6.7.1.6-1)
    [2011-08-26 16:13] installed iproute2 (2.6.39-1)
    [2011-08-26 16:13] upgraded kbd (1.15.2-1 -> 1.15.3-1)
    [2011-08-26 16:13] warning: /etc/inittab installed as /etc/inittab.pacnew
    [2011-08-26 16:13] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
    [2011-08-26 16:13] Blacklisting of modules is no longer supported in rc.conf,
    [2011-08-26 16:13] please add blacklist entries to /etc/modprobe.d/ instead.
    [2011-08-26 16:13] VERBOSE= in rc.conf no longer has any effect.
    [2011-08-26 16:13] Please append 'quiet' to your kernel command line.
    [2011-08-26 16:13] upgraded initscripts (2011.04.1-2 -> 2011.07.3-1)
    [2011-08-26 16:13] upgraded poppler-glib (0.16.4-1 -> 0.16.7-1)
    [2011-08-26 16:13] upgraded inkscape (0.48.1-2 -> 0.48.2-1)
    [2011-08-26 16:13] upgraded irssi (0.8.15-4 -> 0.8.15-5)
    [2011-08-26 16:13] upgraded jfsutils (1.1.14-2 -> 1.1.15-2)
    [2011-08-26 16:14] upgraded jre (6u25-1 -> 7-3)
    [2011-08-26 16:14] upgraded libdmtx (0.7.2-2 -> 0.7.4-1)
    [2011-08-26 16:14] installed qrencode (3.1.1-2)
    [2011-08-26 16:14] installed prison (1.0-1)
    [2011-08-26 16:14] upgraded libedit (20110227_3.0-1 -> 20110802_3.0-1)
    [2011-08-26 16:14] upgraded openssh (5.8p2-1 -> 5.8p2-9)
    [2011-08-26 16:14] upgraded lm_sensors (3.3.0-1 -> 3.3.1-2)
    [2011-08-26 16:14] upgraded xorg-xprop (1.2.0-2 -> 1.2.1-1)
    [2011-08-26 16:14] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
    [2011-08-26 16:14] installed libkexiv2 (4.7.0-2)
    [2011-08-26 16:15] upgraded qscintilla (2.5.1-1 -> 2.5.1-2)
    [2011-08-26 16:15] installed ocaml (3.12.1-1)
    [2011-08-26 16:15] installed libkipi (4.7.0-2)
    [2011-08-26 16:16] upgraded sane (1.0.22-1 -> 1.0.22-2)
    [2011-08-26 16:16] installed libksane (4.7.0-2)
    [2011-08-26 16:16] installed libkdcraw (4.7.0-2)
    [2011-08-26 16:16] upgraded poppler-qt (0.16.4-1 -> 0.16.7-1)
    [2011-08-26 16:16] upgraded libidn (1.21-1 -> 1.22-1)
    [2011-08-26 16:16] upgraded qt3 (3.3.8-19 -> 3.3.8-20)
    [2011-08-26 16:16] upgraded libktorrent (1.1.1-1 -> 1.1.2-1)
    [2011-08-26 16:16] installed libmms (0.6.2-1)
    [2011-08-26 16:16] upgraded libgadu (1.10.1-1 -> 1.11.0-1)
    [2011-08-26 16:16] installed ortp (0.16.5-1)
    [2011-08-26 16:16] installed mediastreamer (2.7.3-3)
    [2011-08-26 16:17] upgraded qwt (5.2.1-1 -> 6.0.0-1)
    [2011-08-26 16:17] upgraded neon (0.29.3-2 -> 0.29.6-2)
    [2011-08-26 16:17] upgraded subversion (1.6.15-1 -> 1.6.17-6)
    [2011-08-26 16:17] upgraded linux-firmware (20110227-1 -> 20110727-1)
    [2011-08-26 16:17] upgraded mkinitcpio-busybox (1.18.2-1 -> 1.18.5-1)
    [2011-08-26 16:17] upgraded mkinitcpio (0.6.11-1 -> 0.7.2-1)
    [2011-08-26 16:18] >>> Updating module dependencies. Please wait ...
    [2011-08-26 16:18] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2011-08-26 16:18] ==> Building image from preset: 'default'
    [2011-08-26 16:18] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2011-08-26 16:18] ==> Starting build: 3.0-ARCH
    [2011-08-26 16:18] -> Parsing hook: [base]
    [2011-08-26 16:18] -> Parsing hook: [udev]
    [2011-08-26 16:18] -> Parsing hook: [autodetect]
    [2011-08-26 16:18] -> Parsing hook: [pata]
    [2011-08-26 16:18] -> Parsing hook: [scsi]
    [2011-08-26 16:18] -> Parsing hook: [sata]
    [2011-08-26 16:18] -> Parsing hook: [filesystems]
    [2011-08-26 16:18] -> Parsing hook: [usbinput]
    [2011-08-26 16:18] ==> Generating module dependencies
    [2011-08-26 16:18] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2011-08-26 16:18] 7278 blocks
    [2011-08-26 16:18] ==> Image generation successful
    [2011-08-26 16:18] ==> Building image from preset: 'fallback'
    [2011-08-26 16:18] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2011-08-26 16:18] ==> Starting build: 3.0-ARCH
    [2011-08-26 16:18] -> Parsing hook: [base]
    [2011-08-26 16:18] -> Parsing hook: [udev]
    [2011-08-26 16:18] -> Parsing hook: [pata]
    [2011-08-26 16:18] -> Parsing hook: [scsi]
    [2011-08-26 16:18] -> Parsing hook: [sata]
    [2011-08-26 16:18] -> Parsing hook: [filesystems]
    [2011-08-26 16:18] -> Parsing hook: [usbinput]
    [2011-08-26 16:18] ==> Generating module dependencies
    [2011-08-26 16:18] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2011-08-26 16:18] 23389 blocks
    [2011-08-26 16:18] ==> Image generation successful
    [2011-08-26 16:18] installed linux (3.0.3-1)
    [2011-08-26 16:18] installed linux-headers (3.0.3-1)
    [2011-08-26 16:18] upgraded koffice-servicetypes (2.3.3-3 -> 2.3.3-5)
    [2011-08-26 16:18] upgraded koffice-libs (2.3.3-3 -> 2.3.3-5)
    [2011-08-26 16:18] upgraded koffice-templates (2.3.3-3 -> 2.3.3-5)
    [2011-08-26 16:18] upgraded koffice-plugins (2.3.3-3 -> 2.3.3-5)
    [2011-08-26 16:19] upgraded koffice-krita (2.3.3-3 -> 2.3.3-5)
    [2011-08-26 16:19] upgraded ktorrent (4.1.1-1 -> 4.1.2-1)
    [2011-08-26 16:19] upgraded kwebkitpart (1.1-1 -> 1.1.1-1)
    [2011-08-26 16:19] upgraded less (443-1 -> 444-1)
    [2011-08-26 16:19] upgraded usbmuxd (1.0.6-2 -> 1.0.7-2)
    [2011-08-26 16:19] upgraded libimobiledevice (1.1.0-1 -> 1.1.1-2)
    [2011-08-26 16:19] upgraded libgpod (0.8.0-2 -> 0.8.2-2)
    [2011-08-26 16:19] upgraded libgsf (1.14.20-1 -> 1.14.21-1)
    [2011-08-26 16:19] upgraded liblqr (0.4.1-1 -> 0.4.1-2)
    [2011-08-26 16:19] installed libreoffice-en-US (3.4.2-2)
    [2011-08-26 16:19] installed libtextcat (2.2-8)
    [2011-08-26 16:19] * see https://wiki.archlinux.org/index.php/LibreOffice
    [2011-08-26 16:19] -------------------------------------------------------------------
    [2011-08-26 16:19] LibreOffice has been split into several packages:
    [2011-08-26 16:19] - libreoffice-common
    [2011-08-26 16:19] - libreoffice-{base,calc,draw,impress,math,writer} - frontend applications
    [2011-08-26 16:19] - libreoffice-{gnome,kde4} - desktop integration plugins
    [2011-08-26 16:19] - libreoffice-{sdk,sdk-doc} - add-on and doc for programming using
    [2011-08-26 16:19]  the LibreOffice APIs and for creating
    [2011-08-26 16:19] extensions (UNO components).
    [2011-08-26 16:19] -------------------------------------------------------------------
    [2011-08-26 16:19] * you need to install at least one libreoffice-langpack
    [2011-08-26 16:19] * you may want to pacman -Ss libreoffice-extensions
    [2011-08-26 16:19] to see what additional extensions are prepared to install
    [2011-08-26 16:19] * it's recommended to install {hunspell,mythes,hyphen}-xx pkg
    [2011-08-26 16:19] for spell checking
    [2011-08-26 16:19] * make sure you have installed some ttf font (ttf-dejavu recommended)
    [2011-08-26 16:19] installed libreoffice-common (3.4.2-2)
    [2011-08-26 16:19] installed libreoffice-base (3.4.2-2)
    [2011-08-26 16:19] installed libreoffice-calc (3.4.2-2)
    [2011-08-26 16:19] installed libreoffice-draw (3.4.2-2)
    [2011-08-26 16:19] installed libreoffice-impress (3.4.2-2)
    [2011-08-26 16:19] installed libreoffice-math (3.4.2-2)
    [2011-08-26 16:19] upgraded libwpd (0.9.1-1 -> 0.9.2-1)
    [2011-08-26 16:19] installed libwps (0.2.2-1)
    [2011-08-26 16:19] installed libreoffice-writer (3.4.2-2)
    [2011-08-26 16:19] upgraded libreoffice-extension-ct2n (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] The jdk package is licensed software.
    [2011-08-26 16:20] You MUST read and agree to the license stored in
    [2011-08-26 16:20] /usr/share/licenses/jdk/LICENSE before using it.
    [2011-08-26 16:20] Please relogin to include jdk in your PATH
    [2011-08-26 16:20] installed jdk (7-3)
    [2011-08-26 16:20] upgraded libreoffice-extension-diagram (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-hunart (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-nlpsolver (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-numbertext (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-oooblogger (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-pdfimport (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-presentation-minimizer (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-presenter-screen (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-report-builder (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-typo (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-watch-window (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libreoffice-extension-wiki-publisher (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded make (3.81-5 -> 3.82-3)
    [2011-08-26 16:20] upgraded libreoffice-sdk (3.3.2-2 -> 3.4.2-2)
    [2011-08-26 16:20] upgraded libsoup (2.34.1-1 -> 2.34.3-1)
    [2011-08-26 16:20] upgraded libwebkit (1.4.0-1 -> 1.4.2-1)
    [2011-08-26 16:20] upgraded links (2.3pre1-1 -> 2.3-1)
    [2011-08-26 16:20] upgraded logrotate (3.7.9-1 -> 3.8.0-1)
    [2011-08-26 16:20] upgraded luasocket (2.0.2-4 -> 2.0.2-5)
    [2011-08-26 16:20] upgraded lzo2 (2.04-1 -> 2.05-1)
    [2011-08-26 16:20] upgraded man-db (2.6.0.2-1 -> 2.6.0.2-2)
    [2011-08-26 16:20] upgraded mdadm (3.2.1-3 -> 3.2.2-3)
    [2011-08-26 16:20] upgraded mercurial (1.8.3-1 -> 1.9.1-1)
    [2011-08-26 16:21] ERROR: Module nvidia is in use
    [2011-08-26 16:21] In order to use the new nvidia module, exit Xserver and unload it manually.
    [2011-08-26 16:21] upgraded nvidia-173xx (173.14.30-1 -> 173.14.31-2)
    [2011-08-26 16:21] upgraded octave (3.4.0-2 -> 3.4.2-2)
    [2011-08-26 16:21] upgraded openal (1.13-1 -> 1.13-2)
    [2011-08-26 16:21] upgraded openbox (3.4.11.2-2 -> 3.5.0-3)
    [2011-08-26 16:21] upgraded xine-lib (1.1.19-2 -> 1.1.19-3)
    [2011-08-26 16:21] ==> Documentation and samples are in separate packages:
    [2011-08-26 16:21]
    [2011-08-26 16:21] * opencv-docs
    [2011-08-26 16:21] * opencv-samples
    [2011-08-26 16:21] upgraded opencv (2.2.0-5 -> 2.3.0-1)
    [2011-08-26 16:21] upgraded oxygen-gtk (1.0.4-1 -> 1.1.2-1)
    [2011-08-26 16:22] upgraded oxygen-icons-svg (4.6.2-1 -> 4.7.0-1)
    [2011-08-26 16:22] upgraded p7zip (9.20.1-1 -> 9.20.1-4)
    [2011-08-26 16:22] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2011-08-26 16:22] upgraded pacman-mirrorlist (20110324-1 -> 20110816-1)
    [2011-08-26 16:22] upgraded pcmciautils (017-2 -> 018-1)
    [2011-08-26 16:22] upgraded perl-text-iconv (1.7-5 -> 1.7-6)
    [2011-08-26 16:22] upgraded perl-xml-parser (2.40-2 -> 2.41-1)
    [2011-08-26 16:22] upgraded pkg-config (0.25-3 -> 0.26-1)
    [2011-08-26 16:22] upgraded postgresql-libs (9.0.4-3 -> 9.0.4-4)
    [2011-08-26 16:22] upgraded procps (3.2.8-3 -> 3.2.8-4)
    [2011-08-26 16:22] upgraded python2-distribute (0.6.16-1 -> 0.6.19-1)
    [2011-08-26 16:22] upgraded qtcurve-gtk2 (1.8.8-1 -> 1.8.9-1)
    [2011-08-26 16:22] upgraded qtcurve-kde4 (1.8.7-1 -> 1.8.8-1)
    [2011-08-26 16:24] upgraded qt-doc (4.7.2-1 -> 4.7.3-1)
    [2011-08-26 16:24] >>> The kernel-mode plugin has a new place.
    [2011-08-26 16:24] >>> It's now located under /usr/lib/rp-pppoe/rp-pppoe.so
    [2011-08-26 16:24] >>> Change LINUX_PLUGIN to the new path in your /etc/ppp/pppoe.conf
    [2011-08-26 16:24] upgraded rp-pppoe (3.10-6 -> 3.10-7)
    [2011-08-26 16:24] upgraded rrdtool (1.4.5-1 -> 1.4.5-4)
    [2011-08-26 16:24] updating gtk.immodules... done.
    [2011-08-26 16:24] upgraded scim (1.4.9-2 -> 1.4.11-1)
    [2011-08-26 16:24] upgraded screen (4.0.3-11 -> 4.0.3-12)
    [2011-08-26 16:24] upgraded skype (2.2.0.25-1 -> 2.2.0.35-1)
    [2011-08-26 16:24] upgraded soundtouch (1.5.0-1 -> 1.6.0-1)
    [2011-08-26 16:24] upgraded sudo (1.8.1.p1-1 -> 1.8.2-1)
    [2011-08-26 16:24] upgraded syslog-ng (3.2.2-2 -> 3.2.4-3)
    [2011-08-26 16:25] upgraded tcl (8.5.9-1 -> 8.5.10-1)
    [2011-08-26 16:26] Updating font cache... done.
    [2011-08-26 16:26] Note: terminus-font is in /usr/share/fonts/local/
    [2011-08-26 16:26] upgraded terminus-font (4.32-1 -> 4.36-1)
    [2011-08-26 16:26] upgraded tk (8.5.9-1 -> 8.5.10-1)
    [2011-08-26 16:27] Updating font cache... done.
    [2011-08-26 16:27] upgraded ttf-liberation (1.06.0.20100721-1 -> 1.07.0-1)
    [2011-08-26 16:27] upgraded tzdata (2011g-1 -> 2011h-1)
    [2011-08-26 16:27] upgraded usbutils (002-2 -> 004-1)
    [2011-08-26 16:27] upgraded vi (050325-4 -> 1:050325-1)
    [2011-08-26 16:27] Updating vim help tags...done.
    [2011-08-26 16:27] upgraded vim-supertab (1.5-1 -> 1.6-1)
    [2011-08-26 16:27] Updating vim help tags...done.
    [2011-08-26 16:27] upgraded vim-vcscommand (1.99.42-1 -> 1.99.43-1)
    [2011-08-26 16:27] upgraded wget (1.12-5 -> 1.13.1-1)
    [2011-08-26 16:27] upgraded wine (1.3.19-2 -> 1.3.26-1)
    [2011-08-26 16:27] upgraded winetricks (20110429-1 -> 20110629-1)
    [2011-08-26 16:27] upgraded xcursor-themes (1.0.2-1 -> 1.0.3-1)
    [2011-08-26 16:27] upgraded xorg-iceauth (1.0.4-2 -> 1.0.5-1)
    [2011-08-26 16:27] upgraded xorg-util-macros (1.13.0-1 -> 1.15.0-1)
    [2011-08-26 16:27] upgraded xorg-server-devel (1.10.1-1 -> 1.10.3.901-1)
    [2011-08-26 16:27] upgraded xorg-twm (1.0.6-2 -> 1.0.7-1)
    [2011-08-26 16:27] upgraded xorg-x11perf (1.5.3-2 -> 1.5.4-1)
    [2011-08-26 16:27] upgraded xorg-xlsclients (1.1.1-2 -> 1.1.2-1)
    [2011-08-26 16:28] upgraded xorg-xrandr (1.3.4-2 -> 1.3.5-1)
    [2011-08-26 16:28] upgraded xorg-xwininfo (1.1.1-2 -> 1.1.2-1)
    [2011-08-26 16:28] upgraded xpdf (3.02_pl6-1 -> 3.03-1)
    [2011-08-26 16:28] upgraded xscreensaver (5.12-2 -> 5.14-1)
    [2011-08-26 16:28] upgraded xterm (269-1 -> 271-1)
    [2011-08-26 16:28] upgraded xulrunner (2.0.1-1 -> 6.0-2)
    [2011-08-26 16:28] upgraded zsnes (1.51-7 -> 1.51-9)
    /etc/rc.conf without any comments:
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK="UTC"
    TIMEZONE="Europe/Stockholm"
    KEYMAP="se-lat6"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    MODULES=()
    UDEV_TIMEOUT=30
    USEDMRAID="no"
    USEBTRFS="no"
    USELVM="no"
    HOSTNAME="archon"
    interface=eth0
    address=
    netmask=
    broadcast=
    gateway=
    NETWORK_PERSIST="no"
    DAEMONS=(syslog-ng @network dbus preload !netfs @crond @cups @sshd @startntpd)
    /etc/mkinitcpio.conf without any comments:
    MODULES=""
    BINARIES=""
    FILES=""
    HOOKS="base udev autodetect pata scsi sata filesystems"
    Please let me know if you need to know anything else.
    Last edited by Mogger (2012-03-30 23:33:38)

    I've temporarily fixed the problem by doing the following:
    removed cryptsetup (1.3.1-2)
    removed lvm2 (2.02.88-1)
    removed mdadm (3.2.2-4)
    removed linux (3.0.6-2)
    upgraded mkinitcpio-busybox (1.18.5-1 -> 1.18.2-1)
    installed gen-init-cpio (2.6.36-1)
    upgraded udev (173-3 -> 167-2)
    upgraded mkinitcpio (0.7.3-1 -> 0.6.11-1)
    installed kernel26 (2.6.38.5-1)
    upgraded nvidia-173xx-utils (173.14.31-1 -> 173.14.30-1)
    upgraded nvidia-173xx (173.14.31-2 -> 173.14.30-1)
    upgraded initscripts (2011.07.3-1 -> 2011.04.1-2)
    upgraded net-tools (1.60.20110819cvs-1 -> 1.60-18)
    I also restored my old /etc/mkinitcpio.conf, /etc/inittab and /etc/rc.conf.
    I'm still interested in a solution to the original problem. Is it a problem with my configuration, the new kernel, the udev version or something else?
    The difference in inittab is just a -s option and the mkinitcpio.conf files are the same except for some comments. rc.conf has the biggest changes and is now (removed comments):
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK="UTC"
    TIMEZONE="Europe/Stockholm"
    KEYMAP="se-lat6"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    VERBOSE="3"
    MOD_AUTOLOAD="yes"
    MODULES=(!usblp !pcspkr)
    UDEV_TIMEOUT=30
    USEDMRAID="no"
    USEBTRFS="no"
    USELVM="no"
    HOSTNAME="archon"
    eth0="dhcp"
    INTERFACES=(eth0)
    ROUTES=(!gateway)
    NETWORK_PERSIST="no"
    DAEMONS=(syslog-ng @network dbus preload !netfs !wicd @crond @cups @sshd @startntpd)
    Last edited by Mogger (2011-10-11 14:04:20)

  • WORKAROUND/SOLVED: Kernel panic on Macbook Air 5,2 on Lion 10.7.5 on wake

    Hi all. I had been getting plagued by kernel panics with my relatively new Macbook Air (which I otherwise have had no issues with) when I did the following in sequence:
    While connected to a power supply, lock screen
    Close the lid
    Disconnect power supply
    Open the lid
    For me, this seemed to have been caused by the Automatically adjust brightness option. To access it, go to System Preferences > Displays > Automatically adjust brightness, and uncheck the box. I also unchecked similar options that dim the screen before sleep in Energy Saver. This seems to have fixed it. I'm including the full kernel panic report -- if you're having problems with kernel panics, give it a try. I'm going to see for the next few days if this solves the issue. My guess is that this option and the display driver for this computer are really not playing well together in this version of Lion. I tried various other things:
    Disabling bluetooth
    Using pmset to set the hibernatemode to 0 as well as 25
    Restting SMC
    and none of them fixed it. This did, though, or at least it seems that way -- I am going to check for the next few days and see how it does. I am not running any third party kexts, though I do have a few third party launch agents for daemons, servers and such which have been installed via Homebrew. Feel free to comment. I am definitely a little underwhelmed by this kind of behavior coming from what is a several thousand dollar piece investment that is the most important piece of equipment for me to do my work on any given day, but if I can bypass it for now without too much of a loss in functionality, so be it.
    Wed Nov 14 18:06:10 2012
    panic(cpu 2 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816a11f1, type 13=general protection, registers:
    CR0: 0x000000008001003b, CR2: 0x000000010c0c4000, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
    RAX: 0x3f1cb290b54fb5d7, RBX: 0xffffff80d17da000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
    RSP: 0xffffff80ef5cbb60, RBP: 0xffffff80ef5cbb70, RSI: 0x00000000b513b5c6, RDI: 0xffffff80d17da000
    R8:  0x000000000000001f, R9:  0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0x0000000000000200
    R12: 0xffffff80d17da000, R13: 0x0000000000000000, R14: 0xffffff80d17da000, R15: 0xffffff80ef5cbbc0
    RFL: 0x0000000000010282, RIP: 0xffffff7f816a11f1, CS:  0x0000000000000008, SS:  0x0000000000000000
    CR2: 0x000000010c0c4000, Error code: 0x0000000000000000, Faulting CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff80ef5cb810 : 0xffffff8000220792
    0xffffff80ef5cb890 : 0xffffff80002c4794
    0xffffff80ef5cba40 : 0xffffff80002da55d
    0xffffff80ef5cba60 : 0xffffff7f816a11f1
    0xffffff80ef5cbb70 : 0xffffff7f816a2413
    0xffffff80ef5cbbb0 : 0xffffff7f81691e31
    0xffffff80ef5cbca0 : 0xffffff7f816aec05
    0xffffff80ef5cbce0 : 0xffffff7f81690257
    0xffffff80ef5cbd10 : 0xffffff7f80c92832
    0xffffff80ef5cbd50 : 0xffffff7f817184f0
    0xffffff80ef5cbda0 : 0xffffff7f8171a692
    0xffffff80ef5cbde0 : 0xffffff7f8171a7c4
    0xffffff80ef5cbe20 : 0xffffff7f80c964c5
    0xffffff80ef5cbe60 : 0xffffff7f80c96628
    0xffffff80ef5cbe90 : 0xffffff7f80c99fd7
    0xffffff80ef5cbef0 : 0xffffff800063d4d6
    0xffffff80ef5cbf30 : 0xffffff800063c250
    0xffffff80ef5cbf70 : 0xffffff800063c0f4
    0xffffff80ef5cbfb0 : 0xffffff8000820057
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c87000->0xffffff7f80cbffff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8086b000
             com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f8170d000->0xffffff7f8176afff
                dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f80c30000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8086b000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c87000
             com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f8168d000->0xffffff7f816f3fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f8086b000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc0000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c87000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    11G63b
    Kernel version:
    Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
    Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
    System model name: MacBookAir5,2 (Mac-2E6FAB96566FE58C)
    System uptime in nanoseconds: 108364440503
    last loaded kext at 59338179474: com.apple.filesystems.smbfs          1.7.2 (addr 0xffffff7f807d9000, size 241664)
    last unloaded kext at 78468272086: com.apple.driver.AppleUSBTCKeyEventDriver          227.6 (addr 0xffffff7f814c7000, size 8192)
    loaded kexts:
    com.apple.filesystems.smbfs          1.7.2
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AGPM          100.12.75
    com.apple.driver.ApplePlatformEnabler          2.0.5d3
    com.apple.driver.X86PlatformShim          5.0.0d8
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleHDA          2.2.5a5
    com.apple.driver.AppleMikeyDriver          2.2.5a5
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AppleSMCPDRC          5.0.0d8
    com.apple.driver.AppleSMCLMU          2.0.1d2
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AudioIPCDriver          1.2.3
    com.apple.driver.ApplePolicyControl          3.1.33
    com.apple.driver.AppleBacklight          170.2.2
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleIntelHD4000Graphics          7.3.2
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.driver.AppleIntelFramebufferCapri          7.3.2
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
    com.apple.driver.AppleUSBCardReader          3.0.6
    com.apple.driver.AppleUSBTCButtons          227.6
    com.apple.driver.AppleUSBTCKeyboard          227.6
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.1.0
    com.apple.driver.AirPort.Brcm4331          561.7.22
    com.apple.driver.AppleUSBHub          5.1.0
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleAHCIPort          2.3.1
    com.apple.driver.AppleUSBXHCI          1.1.0
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleUSBEHCI          5.1.0
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.4
    com.apple.security.TMSafetyNet          8
    com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.2.5a5
    com.apple.driver.X86PlatformPlugin          5.1.1d6
    com.apple.driver.AppleHDAController          2.2.5a5
    com.apple.iokit.IOHDAFamily          2.2.5a5
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.iokit.IOAudioFamily          1.8.6fc18
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleGraphicsControl          3.1.33
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.IOPlatformPluginFamily          5.1.1d6
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleSMC          3.1.3d10
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
    com.apple.iokit.IOBluetoothFamily          4.0.8f17
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.1
    com.apple.iokit.IOUSBMassStorageClass          3.0.3
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
    com.apple.driver.AppleUSBMultitouch          230.5
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.0
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.driver.AppleThunderboltNHI          1.6.0
    com.apple.iokit.IOThunderboltFamily          2.0.3
    com.apple.iokit.IO80211Family          420.3
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOUSBFamily          5.1.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.8
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          331.7
    com.apple.iokit.IOStorageFamily          1.7.2
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4

    As far as my question itself -- why does this happen? Has anybody had this issue on Lion and had it resolved on Mountain Lion?

  • I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

    I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
    Interval Since Last Panic Report:  665204 sec
    Panics Since Last Report:          8
    Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
    Sat May 26 07:23:05 2012
    panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8160313b00 : 0xffffff8000220792
    0xffffff8160313b80 : 0xffffff80002b4f36
    0xffffff8160313b90 : 0xffffff8000227e68
    0xffffff8160313bd0 : 0xffffff7f80d14250
    0xffffff8160313c20 : 0xffffff7f80d14f73
    0xffffff8160313cc0 : 0xffffff800059a237
    0xffffff8160313d00 : 0xffffff8000586cbf
    0xffffff8160313d20 : 0xffffff800057e6e3
    0xffffff8160313df0 : 0xffffff800057ed06
    0xffffff8160313e20 : 0xffffff8000583c52
    0xffffff8160313e70 : 0xffffff8000583d05
    0xffffff8160313e90 : 0xffffff80005358b4
    0xffffff8160313ef0 : 0xffffff80005367c3
    0xffffff8160313f30 : 0xffffff8000536897
    0xffffff8160313f60 : 0xffffff80005ccfe8
    0xffffff8160313fb0 : 0xffffff80002da5e9
          Kernel Extensions in backtrace:
    com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
    dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
    BSD process name corresponding to current thread: iStatLocalDaemon
    Mac OS version:
    11E53
    Kernel version:
    Darwin Kernel Version 11.4.0: Mon Apr  9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
    Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 69777074610
    last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
    loaded kexts:
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
    Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
    USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
    USB Device: CanoScan, 0x04a9  (Canon Inc.), 0x1904, 0xfa141200 / 6
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: HUAWEI Mobile, 0x12d1  (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
    USB Device: My Passport 070A, 0x1058  (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    Immediate suspects are the additions you added to you rsystem that installed kexts (drivers).  From above,
    com.intego.iokit.VBX6NKE            1
    com.intego.iokit.BehavioralKext            1
    com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
    com.intego.kext.VirusBarrierKPI            10.6.8
    com.globaldelight.driver.BoomDevice            1.1
    com.huawei.driver.HuaweiDataCardACMData            4.2
    Two experiments you can try.
    1.  Boot in safe mode and see if you can shut down normally.  All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
    2. Uninstall all the intego VirusBarrier stuff.  That's my first guess and the troublemaker.

  • [SOLVED] kernel panic - no init found

    Hello:
    After my last system update, (including kernel) two problems appeared. First the magic files problem, solved with pacman -Qo, delleting and reinstalling (perhaps it has something to do with this problem). Second, this kernel panic when I restarted the pc.
    failed to execute /init
    kernel panic - no init found
    specify init= (or something similar)
    I get only these lines as error, before is the message of the freed kernel memory.
    At the moment I tried with the solutions that I have find at the forum:
    - Run with livecd, mount all (including boot, proc, sys, dev), chroot and
    mkinitcpio -p kernel26
    - Check if the partitions uuids are the correct ones in grub config.
    - Check if I have the symlink to asm in the includes, that someone report on the arch news that could be conflictive (I have a folder there).
    - Reinstall the kernel26, mkinitcpio, klibc, etc. all the stuff that I thought that could be related.
    - Specify in grub config init=/sbin/init, and check if the file was there-> there was a new message saying that also failed to execute /sbin/init
    The problem persists, and google doesn't helps and in the forum I can't find an answer neither. I don't know what else I can do, so all help will be apreciated
    Thank you
    PD: sorry for my English
    SOLVED:
    The problem was that mkinitcpio outputed an error with zgrep and I think that it wasn't changing nothing. I reinstalled gzip and no errors were reported, so the new ramdisk was created and now the system boots ok. The error with zgrep I think that it comes from my last upgrade, because I didn't have enough space and a lot of errors in a few packages appeared, the errors were cannot execute or file already exists in the system.
    Thanks for the answers.
    Last edited by foucelhas (2009-05-13 13:05:02)

    Seems init is present in the initrd image (very small image?):
    1199 blocks
    /bin/kinit
    /bin/run-init
    /init
    The initrd path I think it's also correctly setted up:
    # (0) Arch Linux
    title Arch Linux
    root (hd0,1)
    kernel /vmlinuz26 root=/dev/disk/by-uuid/bfb12545-43dd-49de-9a70-c8ab9926181c resume=/dev/sda5 ro
    initrd /kernel26.img
    # (1) Arch Linux
    title Arch Linux Fallback
    root (hd0,1)
    kernel /vmlinuz26 root=/dev/disk/by-uuid/bfb12545-43dd-49de-9a70-c8ab9926181c ro
    initrd /kernel26-fallback.img
    I have one separate boot partition, as you say, sda2, and the filesystem/general partition is sda6. I tried to put this names instead the uuids too, but didn't worked.
    The fallback image neither helped.
    I also tried to check if the partitions are ok (sda2 and sda6), with xfs_check and xfs_repair (filesystem it's xfs).
    Last edited by foucelhas (2009-05-13 12:16:12)

  • [SOLVED] Kernel panic for an unknown reason

    [Solved] Steps done to solve it:
    0. Panic because I couldn't play starcraft2 (this step is sooo important! ;)
    1. Updated my mirrorlist.
    2. Forced a refresh on the package list from the new mirrorlist. "pacman -Syy"
    3. Downgraded the kernel.
    4. Deleted the latest kernel package from the pacman cache.
    5. Updated the system. (pacman -Syu)
    6. Thanked lilsirecho for helping out!
    7. Profit
    Hi all
    I just did a "pacman -Syu" this afternoon and after that I'm getting kernel panics for unknown reasons.
    edit: I had kernel 3.0.4 befure syu and I have kernel 3.0.7 now. I tried downgrading wine and the kernel with no success.
    It first happened when I tried to run StarCraft2 with wine. I even created a post looking for help because of that.
    Later on I tested another game, just in case, and it crashed too.
    Looks like a wine problem, right? Or even a graphics driver problem.
    That's what I thought too. But then I tried to update with "yaourt -Syu --aur" and in the first package compression it freezed once again. And it does fail everytime I try to update with yaourt during the compression phase.
    What do this situations have in common?
    My opinion is that they all require a lot of resources. StarCraft 2 puts my PC at 100% almost all the time. The other game is pretty old, but it freezed during an "environment loading" phase, right when the map was loading. The compression phase of yaourt also consumes a lot of resources.
    This is my view of this problem, but I could be completely wrong.
    What I need is help finding what is the real source of this kernel panics. I don't know where to look for the logs or the error reports when a kernel panic occurs.
    I hope someone can help me trace the problem somehow. I think I'm lost
    ty in advance.
    cheers!
    Last edited by fatum (2011-11-10 23:16:10)

    lilsirecho wrote:
    Possibly caused by a mirror download.
    Perhaps you need to revert kernel and insure you have the latest mirrorlist and then syu again.
    When I saw your response I thought: "Why should that be true? I downgraded the kernel with no success. Doesn't make much sense".
    But then I did what you said:
    Downgraded the kernel back to 3.0.4.
    Moved the latest mirrorlist.pacnew I had to be the mirrorlist in use.
    Then did a "pacman -Syyu".
    And, miraculously, it works fine now.
    How in the world did you know that could be the reason? It would have been the last possibility I would have thought about, no doubt about that
    Thank you very much lilsirecho. Your post really helped me.
    Not gonna mark this as SOLVED yet. Yesterday I marked my other thread as solved too soon and I regretted my decision.
    I will leave a 1week time-frame to be 100% sure that it is fixed, just in case.

Maybe you are looking for

  • Problems using screen saver slideshow

    I have a selection of travel pictures which I use as screensaver on my Apple TV. After the last ATV software upgrade an annoying black window appears on the screen along with the slideshow asking me to select an Airplay source (choose 1 for my LAN or

  • HT201316 i accidentally changed the name of my hd on the desktop

    Hi everyone, glad to be here, and glad you might be able to help me. I can't remember what the original name was on my desktop hardrive icon, how can I find out the original name so I can change it back?  Thanks All.

  • Wrong data for Bi Consumer Role

    Hi, i've a problem. I've developed a report in BI Publisher. If i access with Administrator user, i see correct data, but if i access with user not belonging to Administrator Group (BI Consumer or BI Author). i see uncorrect data. I have created new

  • HT1430 Can't send mail from yahoo on my iPhone 3G through AT&T

    I tried resetting the phone and it still won't send emails. It's not my yahoo account as it works from my iPad and my laptop. I'm trying to  til fall to buy a new phone so I can switch carriers...any ideas on how to fix this issue?

  • HT5457 How do I download iOS 6

    I need help too find iOS 6 so I can use Siri on my I pad 3