[SOLVED] ssh authorized_keys and command="" generating multiple proces

Hey everyone, I've been using use
command="(tmux attach-session -t tmux_session || tmux new-session -s tmux_session)"
at the start of my authorized_keys file to make sure I remember to use tmux when I connect to my server. I have noticed however that every time I connect there are two processes with the command above
11476 bash -c (tmux attach-session -t tmux_session || tmux new-session -s tmux_session)
11477 bash -c (tmux attach-session -t tmux_session || tmux new-session -s tmux_session)
can anyone explain to me why there are two processes started from this command?
Also on another note why does detaching the tmux session close the ssh connection instead of giving me my normal shell?
Thanks for any help,
tpolich
Last edited by tpolich (2011-10-16 21:24:12)

You've volunteered a subshell in that command by wrapping it in parenthesis. So, yes, there's an extra process spawned.
Aside: The || condition is unnecessary. Name your tmux socket rather than your session (via -L) and use attach. If the socket doesn't exist, it'll be created. If it does, you'll reattach to it. In other words:
command="tmux -L default attach"
Last edited by falconindy (2011-10-15 14:42:08)

Similar Messages

Purchase order generating multiple outputs

Hi All,
We are facing this unusal problem where the PO is generating multiple messages .The most tricky part is its doing only in the morning at 9.30 am when the goods movement file is run.
During this time the PO close goes crazy and it generates multiple outputs per line item.
Please advice.
Regards,
Jinen

Hi,
What does the goods movement file run do ? Based on this you can do the same manually to a PO and check why the output is triggered.
Cheers !

Generate and Print Preview Multiple Forms in a Single PDF

There have been other questions similar to this but none directly address my problem. We have the need to generate multple forms in a .pdf using Adobe interactive forms. We can generate the multiple forms, but the user has to click on each form to view. They want to have the forms in a single document that they can scroll through before printing. We can do this in SmartForms but need to do it in Adobe. Does anyone know how to generate multiple forms, either multiple copies of the same form or various forms, from an ABAP program into a single pdf that can be print previewed, in scrollable form, by the user?

I can describe it one more time, I think:))
You have multiple options, but only one "reasonable" within SAP.
You can call an external application (through command line etc.) to concatenate forms for you.
You can use iText as mentioned in the thread, and write yourself a "tool" which will concatenate the forms for you.
Both these "options" would not be acceptable for my clients, I name them to help you get the whole picture.
Then there is the third option: use a form for a single instance (template/ form A) and create a new form (form B), where you will use the A template:
- you need to: create a new interface where everything from the old interface is a row of the table (example: you have a form to print out the personal card of the employee, so in a new form you will need to use a table, where a row is an employee)
- you need to create a new form layout based on the new interface:
in this new layout you will paste the whole layout of the old form (A/ single instance) and wrap it into a subform. The added subform will work as a table (you will bind that to the table from interface) and everything from the old template within this new subform will work as a "row" (something what you can repeat for each data item).
Does that sound reasonable?
Cheers Otto

Using Start-Job to launch multiple SSH sessions and esxtop?

Hello folks,
I am trying to start an esxtop session on multiple esx servers at the same time.
I started trying using Start-Job thinking it would help do it asynchronously.
The script I have below works on one host so far, but need suggestions to repeat it for multiple hosts, thinking by looping through changing the $i each time?
Checking if anyone would have comment?
$i = 1
$seconds = 5
$iterations = 2
$esxtopfile = "esxtop$i_$((Get-Date).ToString('MMddyyy-hhmm')).csv"
$ComputerName = "z420esxi$i.domain.net"
# Start an esxtop session using SSH.net and start an esxtop command - module already loaded.
$sb = {New-SshSession -ComputerName $($args[0]) -KeyFile C:\esxi-key-openssh.key -Username root
Invoke-SshCommand -ComputerName $($args[0]) -command "esxtop -d $($args[1]) -a -b -n $($args[2]) > /tmp/$($args[3])"
Start-Job -ScriptBlock $sb -ArgumentList $ComputerName,$seconds,$iterations,$esxtopfile | Wait-Job | Receive-Job

A: Using Start-Job to launch multiple SSH sessions and esxtop?

You're starting for a job, waiting for that job to complete and then finally receiving that job
before allowing anything else to happen with your script.
In other words, if you had some code after the Start-Job line, it would not be executed until the job had completed and you had received the job, which partially negates the benefits of using a job to begin with (specially bearing in mind you don't have
a form).
The way to achieve what you're after is to start all jobs at the same time, one per ESX host, and then finally to wait for all jobs and collect all jobs at the end.
Here's a quick example that starts 5 jobs and wait for all of them to complete before receiving the results.
$jobs = @()
$jobs += 1..5 | ForEach-Object {Start-Job -ScriptBlock {Sleep $args[0]; "I just slept for $($args[0]) seconds"} -ArgumentList $_}
[void] (Wait-Job $jobs)
Receive-Job $jobs
Notice that each of the subsequent jobs will take longer and longer to run, with the first being the fastest and the last the slowest. Still, I'm waiting for *all* jobs to complete before performing the Receive-Jobs on all of them at the same time.

TYPING AUTOMATICALLY GENERATES MULTIPLE LETTERS AND ERASES BY ITSELF

While texting my keyboard has started to generate multiple letters, periods after words, and to erase letters that I just typed.
I need to retype everything.
is it a bug, is it broken, do I have an incorrect setting?

Try Pulling the Battery out without turning the phone OFF.
Make sure its not connected to anything (cable, charger), Make sure its turned ON, then pull battery out.
OR
It sounds like a software fault. Even more so if nothing is behind the buttons to cause them getting stuck.
You need to download the latest version for your device from the carrier the phone was sold with.
Save the folder to your desktop, double click it to install it your computer. (can take 40 mins to download)
Then you connect up the blackberry and using the program called application loader,(which is built into the desktop manager program that came on the cd) push the new software to the device. Ensure when you see an 'advanced' box, you click into it, to check both check boxes to remove all current installed software.
Here is a list of software carrier sites:
http://na.blackberry.com/eng/support/do ... _sites.jsp
And Also
Use BlackBerry Application Loader to install BlackBerry Device Software
Good Luck and let us know how you go..
9/10 times this is a software fault.
If your issue is resolved, put a checkmark in the green box that contains the resolution.
OR
If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
~Gday from Down Under~

[Solved]SSH messed command prompt

Hello,
I try to describe what is my problem. [CURSOR] - is my cursor
I connect to SSH. OK
I type command. OK
I can correct beginning of command. OK
I execute command. OK
$ echo 11111111111111111111111111
$ echo 0000000000000000000000000
I go to history - first command shows OK
$ echo 0000000000000000000000000
second history command when I try correct beginning(click home button or left arrow), I simply can't, I can access only 11-th letter of command.
$ echo 11111[CURSOR]111111111111111111111
now I go back to first history command
$ echo 11111echo 000000000000000000000000[CURSOR]
command prompt stay messed, and command can be executed successfuly only if I dont touch it.
I can go to beggining, but only 11th character
$ echo 11111[CURSOR]echo 000000000000000000000000
I press once more arrow down to get "live" clear command prompt.
$ echo 11111[CURSOR]
prompt stay messed, I cant delete string, only ctrl+c helps.
I tried urxvt and xterm. Generally it will happen If I execute command which has more than 30 letters.
Thanks for help.
Last edited by kubco2 (2013-11-18 20:31:39)

$TERM says same: xterm
local machine
$ infocmp
# Reconstructed via infocmp from file: /usr/share/terminfo/x/xterm
xterm|xterm terminal emulator (X Window System),
am, bce, km, mc5i, mir, msgr, npc, xenl,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
ind=^J, indn=\E[%p1%dS, invis=\E[8m,
is2=\E[!p\E[?3;4l\E[4l\E>, kDC=\E[3;2~, kEND=\E[1;2F,
kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~,
kPRV=\E[5;2~, kRIT=\E[1;2C, kb2=\EOE, kbs=^H, kcbt=\E[Z,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q,
kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q,
kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\EOH, kich1=\E[2~,
kind=\E[1;2B, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
kri=\E[1;2A, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
rmir=\E[4l, rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m,
rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd,
host machine
$ infocmp
# Reconstructed via infocmp from file: /lib/terminfo/x/xterm
xterm|xterm-debian|X11 terminal emulator,
am, bce, km, mc5i, mir, msgr, npc, xenl,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
ind=^J, indn=\E[%p1%dS, invis=\E[8m,
is2=\E[!p\E[?3;4l\E[4l\E>, kDC=\E[3;2~, kEND=\E[1;2F,
kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~,
kPRV=\E[5;2~, kRIT=\E[1;2C, kb2=\EOE, kbs=\177, kcbt=\E[Z,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q,
kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q,
kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\EOH, kich1=\E[2~,
kind=\E[1;2B, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
kri=\E[1;2A, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
vpa=\E[%i%p1%dd,
I dont know, what should I find in infocmp.
Last edited by kubco2 (2013-11-18 17:36:08)

[Solved] SSH not working (ISP blocks my port 22)

OK full story:
I want to be able to connect to my home arch linux box from school. The setup there are winxp machines whit putty on my usb or the pc itself. I know that my school is not blocking any ports as my friend can connect to his linux box at home. (also ssh)
These are things i did and can think of i need to to do get ssh working:
Before everything else i started to configure my Linsys router.
My ISP gives me an Dynamic IP so i need to use the dyndns.org service. I made an account and configured my linsys router DDNS tab to work with the account. I got into the port forward tab an putted in ssh port forwarding (on port 22 TCP for my ip 192.168.1.102 => did ifconfig to be sure). Port forwarding for port 9091 is also on for my transmission webgui i'm saying this here because this works when i'm at school.
1. Installed openssh
# pacman -S openssh
All installed fine.
2. I've put the sshd into the daemon part of my rc.conf file.
DAEMONS=(syslog-ng network netfs crond @alsa @g15daemon @samba @sshd dbus hal)
3. Hosts.allow file =
# /etc/hosts.allow
SSHD: ALL
# End of file
4. Hosts.deny =
# /etc/hosts.deny
ALL: ALL: DENY
# End of file
5. sshd_config file =
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options change a
# default value.
#Port 22
#AddressFamily any
ListenAddress 0.0.0.0
#ListenAddress ::
# Disable legacy (protocol version 1) support in the server for new
# installations. In future the default will change to require explicit
# activation of protocol 1
Protocol 2
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
LoginGraceTime 120
PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile .ssh/authorized_keys
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
#ChrootDirectory none
# no default banner path
Banner /etc/issue
# override default of no subsystems
Subsystem sftp /usr/lib/ssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server
6. ssh_config file=
# $OpenBSD: ssh_config,v 1.25 2009/02/17 01:28:32 djm Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
Host *
# ForwardAgent no
# ForwardX11 no
# RhostsRSAAuthentication no
# RSAAuthentication yes
# PasswordAuthentication yes
# HostbasedAuthentication no
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# Port 22
# Protocol 2
# Cipher 3des
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,[email protected],hmac-ripemd160
# EscapeChar ~
# Tunnel no
# TunnelDevice any:any
# PermitLocalCommand no
# VisualHostKey no
HashKnownHosts yes
StrictHostKeyChecking ask
7. Im sure SSH is running i even did => /etc/rc.d/sshd restart
8. I have never installed any firewall on my arch box (that i know off). I can connect to it using my other linux laptop
ssh -p 22 192.168.1.102 => works
ssh -p 22 xxxxxx.dyndns.org => works (xxx replaced by my dyndns.org domain)
ssh -p 22 9x.xxx.xxx.xx5 => works (xxx is my normal WAN ip offcourse)
Keep in mind that transsmission port forwarding is working fine. I can connect from everywhere to my webgui wich is on port 9091. Anyone can help me get whats wrong?
Last edited by Redostrike (2010-02-25 17:06:14)

Wild guess but:
# /etc/hosts.allow
SSHD: ALL
# End of file
I don't know if this is case-sensitive, but if it is: it should be "sshd".
If it doesn't work, doesnt hurt to try.

How to generate multiple "gift certificate" pdfs with unique serial #s

I am a new Acrobat user (have Adobe Acrobat 9 Pro) and poked around a bit to see if I could find out how to do this, but found nothing.
I assume this has been done before and hope someone can point me in the right direction.
Here's what I am trying to do:
1. I currently have a pdf doc with a field for a unique serial # (let's call the doc a "Gift Certificate" for simplicity, though that's not quite what it is).
2. I want to generate multiple pdf files, say 100 of them, based on this original Gift Certificate, but with each one having a unique serial # in the appropriate field, say starting at ser # 1001, and running through to ser # 1100.
3. I want to be able to save each of these new files on a hard drive - not outputting them to a printer (though this might come in handy in the future too).
Is this something I can do in Adobe Acrobat Pro 9? I looked at the Batch Processing tool, but that didn't seem to have any ability to create new files.
Or do I need a plug-in? Or a separate software altogether?
Any help for this novice would be greatly appreciated.
Thanks
keith

Problem solved.
Forum member try67 wrote me a script, complete with simple installation instructions.
It works perfectly right out of the box. Great stuff!!!
Wish it always worked that way.
Keith

A note in the Notes application generates multiple copies of itself

A note in the Notes application spontaneously generates multiple copies of itself. This is the second time. This also happened with Mountain Lion. It makes Notes unusable. Any ideas on why this is happening and how to solve it?

Hi,
I had this problem where the app is showing you drafts of your notes you are making which means multiple copies are showing up in the list. I did the following and it fixed my notes on the machine having the issue which is my MacBook Air. I have an iPhone, iPad, and a MacPro which all were acting normal.
1. Open Notes on the machine having the issue and compare to other devices.
2. Make sure to copy and paste any notes on the problematic machine to a text edit document because you are going to delete all notes on the problematic machine.
3. Open the sidebar on the Notes app so you can see all accounts to sync with notes (iCloud Account).
4. If you select the iCloud account does the redundant notes dissapear? For me they did but I went farther with troubleshooting because some of the notes I made on my MacBook Air were not syncing properly.
5. Open System Preferences/iCloud and selct the account you are using to sync notes (iCloud for me).
6. Uncheck Notes from the list
7. Go to the notes app and confirm all notes are gone and you can also erase any stored on your Mac (if you have backed the up or if there are on the iCloud server)
8. Recheck the Notes box in System Preferences/iCloud and confirm that notes sync back to your machine.
9. Operation should be back to normal
Good luck,
R

How can I generate multiple unique random numbers?

Hello,
I am trying to generate multiple random numbers between a given set of numbers (1-52) and not have the same number generated twice within that set. I can compare the last and next numbers with the compare function but how would I go about comparing all of the generated numbers without using a huge list of shift registers...
Any help/ideas are welcome and appreciated.
Jason
Solved!
Go to Solution.

Here is an implementation of Jason's solution.
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.
Attachments:
random.vi ‏10 KB

Generate Multiple Invoices in One PDF

Hi,
I have requirement whereby I need to generate multiple invoices in one PDF file. I am using Oracle BI Publisher with Oracle APEX 4.0.2
If there is only one invoice that needs to be generated in one PDF file then I already have the solution whereby I print the APEX page item session state values on Invoice Header and get the invoice line items from a SQL Query in my RTF template.
However how to the do the same when multiple invoice needs to be generated in one single PDF file ?
Any pointers will highly appreciated.
Thanks & Regards,
Ashish

asagarwal wrote:
However how to the do the same when multiple invoice needs to be generated in one single PDF file ?It should be pretty straight forward.
Once you've got the query returning multiple rows, then just add a repeating group to your report (if an existing report, just select the section of the document that will repeat -> add-ins menu -> insert repeating group...; or right click selection -> BI Publisher -> Create group...), wherein the column values exist. You can even specify a page break at the end.
By the way, this question is probably more suited for the {forum:id=245} forum.
Ta,
Trent

Not able to generate multiple lines for headers in report

Hi,
I am new to BI publisher and not able to generate multiple lines for headers. Please help me to resolve.
I am using RTF template, data source as PS Query and XML file (system generated from the data source)
When I am using system generated 'First XML' file, I am getting output in the follwoing format.
TEAM_MEMBER, PROJECT_ID, NAME, START_DT
e.g.
EMP1 , 71000, Sample, 01-Jan-2010
EMP1 , 72000, Sample, 01-Feb-2010
EMP1 , 73000, Sample, 01-March-2010
But I want the report to be generate with multiple projects for one employee like below format , for that I used 'Second XML' file but I am getting blank report.
In short if there is one to many case, how to show in reports??? Please correct if I am going wrong.
TEAM_MEMBER
PROJECT_ID, NAME, START_DT
PROJECT_ID, NAME, START_DT
PROJECT_ID, NAME, START_DT
e.g.
EMP1
71000, Sample, 01-Jan-2010
72000, Sample, 01-Feb-2010
73000, Sample, 01-March-2010
**********First XML**************System generated XML ****************************
<?xml version="1.0"?>
<query numrows="2" queryname="SY_EMP_PROJECT" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="">
<row rownumber="1">
<TEAM_MEMBER>TEAM_MEMBER </TEAM_MEMBER>
<PROJECT_ID>PROJECT_ID samp</PROJECT_ID>
<NAME>NAME sample data</NAME>
<START_DT>2010-08-25</START_DT>
</row>
<row rownumber="2">
<TEAM_MEMBER>TEAM_MEMBER</TEAM_MEMBER>
<PROJECT_ID>PROJECT_ID samp</PROJECT_ID>
<NAME>NAME sample data</NAME>
<START_DT>2010-08-25</START_DT>
</row>
</query>
**********Second XML**************Manually created XML and using to show multiple projects for one employee****************
<?xml version="1.0"?>
<TEST numrows="2" queryname="SY_EMP_PROJECT" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="">
<TEAM_MEMBER rownumber="1">
<TEAM_MEMBER>1</TEAM_MEMBER>
<EMPLOYEE_NAME>SAMPLE</EMPLOYEE_NAME>
<PROJECT>
<PROJECT_ID>1111</PROJECT_ID>
     <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01012010</START_DATE>
</PROJECT>
<PROJECT>
<PROJECT_ID>1112</PROJECT_ID>
     <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01022010</START_DATE>
</PROJECT>
</TEAM_MEMBER>
<TEAM_MEMBER rownumber="2">
<TEAM_MEMBER>2</TEAM_MEMBER>
<EMPLOYEE_NAME>SAMPLEC</EMPLOYEE_NAME>
<PROJECT>
<PROJECT_ID>1111</PROJECT_ID>
     <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01012010</START_DATE>
</PROJECT>
<PROJECT>
<PROJECT_ID>1112</PROJECT_ID>
     <PROJECT_DESCR>SAMPLE</PROJECT_DESCR>
<START_DATE>01022010</START_DATE>
</PROJECT>
</TEAM_MEMBER>
</TEST>
Edited by: ganeshtw on Aug 25, 2010 12:14 AM

Hi,
With your first xml you can print like
EMP1
71000, Sample, 01-Jan-2010
72000, Sample, 01-Feb-2010
73000, Sample, 01-March-2010While creating the RTF template you can use the Group by option.
<?for-each-group:ROW;./columnname> then print the column name
<?columnname?>
--Then your table format
71000, Sample, 01-Jan-2010
72000, Sample, 01-Feb-2010
73000, Sample, 01-March-2010
<?end for-each-group?>
Thanks.

I need to create a fillable form and then generate a reports.

Hello everybody. I need to create a fillable form and then generate a report using numbers. You know, for example if you have customers, I need to be able to write the usual , name, last name, address, and some other details and then using a standard letter I would like the form to be able to populate these fields automatically in a standard pre formatted letter by our company and then be able to print it.
Any help to point me in the right direction I would appretiate very much.
I have iwork 9 installed in my macbook pro

This is acalled a mail merge and is solved using a combination of Numbers (or address book) and Pages. To get detailed help how to performa a mail merge start in Pages, then in the help menu type Mail Merge:
Also download the help files for Numbers and Pages here:
http://support.apple.com/manuals/#
Page 247 in the Pages User's Guide has details how to perform a a mail merge.
Post back with specific questions if you need to.
Regards,
Wayne

How to generate multiple idoc's from single appl document

All,
Iam looking for a way to generate multiple idoc's from single appl document (sales order). Based on the plant details on line items in the sales order i have to generate multiple idocs, i.e., send one idoc to each plant entered in sales order line items. any help will be appreciated.
Thanks

Hi,
You can create a Z-program and call Function Module <b>MASTER_IDOC_DISTRIBUTE</b>.
You can make a call to this FM to send the Idoc as many times as u have plants in your Sales Order.
You can call FM <b>IDOC_OUTPUT_ORDRSP</b> to fill the IDoc structure.
Then u can keep the materials of only that plant for which u want to pass on the information.
Thanks,
Utsah Garg.

Solaris 10 x86 cdrw trouble. Gnome and command line problems writing.

I'm experiencing general weirdness trying to write CD's and DVD's using a new internal DVD-RW device -- It's a Sony NEC AD 7220 A CD / DVD RW drive on a Solaris 10 x86 AMD system. I have searched far and wide for other threads of similar instances but no one has posted an issue like the one I'm having.
I have a Sony Optiarc AD 7220 A CD-RW on a x86 AMD Athalon 1.6 ghz based server with 2 GB RAM.
The DVD-RW drive gets detected by BIOS (Phoenix TrustedCore 2.3) and reads disks fine. I installed Solaris 10.08 from DVD using this DVD-RW drive.
However, trying to write to new blank media does not work properly, (effectively at all).
I've tried different brands of brands of blank CD's and CD-R and CD+R (have not tried using CD-RW disks yet). Ditto with DVD's - tried DVD-R and DVD+R's.
1. Inside the Solaris 10 GUI (Gnome, a.k.a. Java Desktop), when I put in a blank CD-R, a dialog box "Format Media...?" pops up. If I click "Ok" it formats the blank CD and closes the session, CD has been written to and is ruined.
2. I open a terminal window, as root, and put in a blank CD. "mkisofs r /home/foo 2>/dev/null | cdrw i p 1" will write a directory tree OK, but if I go back into gnome GUI and open and close the CD tray, again, up pops the "Format Media..." dialog box instead of the CD appearing on the desktop. If I restart vold (svcadm restart volfs) then open and close the CD tray, voila, the contents appear on desktop as CD icon.
3. When I try to write to a DVD-R: "cdrw -i /local/iso_image" It always fails with: Write Track 1....Failed. after a few minutes. It did in fact write part of the .iso but bails out with a failure.
I've tried various other write commands (specifying the device ID, speed, so on and so forth) and command line switch options (following the rules of course) and it seems to me to be more than a syntax / media issue. However if it is I would like to know. I did see a similar CDRW device on the HCL for OpenSolaris with a 'reported to work' rating. That was for a Optiarc AD-5200A, which is going away thus my company has chosen to use the AD 7220A in speciality racks we build and deliver to the U.S. Navy.
I really need to get a handle on this CD-RW device issue and decide if a different brand / model is what it's going to take to solve this and move on to producing and delivering these systems in working conditions.

Sony systems are often very particular about what CD's and DVD's they'll take. I have several Sony systems that I use for video work and they'll read almost anything but they'll only write to DVD RW. They also don't like cheap brand CD's and DVD's. Be sure to try both CD RW and DVD RW before doing anything else. Because of the requirement for DVD RW, they won't take fast speed (16x) DVD's, just 4x. If all of this turns out to be the case, you may want to go with a different manufacturer for the drive, DVD +RW 4x aren't always easy to find in the store.

[SOLVED] ssh authorized_keys and command="" generating multiple proces

Similar Messages

Maybe you are looking for