[Solved] systemd-networkd netdev files not working

I'm trying to setup a VLAN interface using networkd. I have verified the VLAN works with a manually created interface, but when I try to create an interface with networkd I just get an error.
Jun 05 11:26:02 files systemd[1]: Starting Network Service...
Jun 05 11:26:02 files systemd-networkd[880]: NetDev with invalid Kind configured in /etc/systemd/network/eno1.10.netdev. Ignoring
Jun 05 11:26:02 files systemd-networkd[880]: [/etc/systemd/network/eno1.network:6] VLAN could not be found, ignoring assignment: eno1.10
Jun 05 11:26:02 files systemd-networkd[880]: Enumeration completed
Jun 05 11:26:02 files systemd[1]: Started Network Service.
Jun 05 11:26:02 files systemd-networkd[880]: eno1 : link configured
I have followed the VLAN setup in the wiki.
/etc/systemd/network/eno1.network
[Match]
Name=eno1
[Network]
DNS=192.168.1.1
VLAN=eno1.10
[Address]
Address=192.168.1.10
[Route]
Gateway=192.168.1.1
/etc/systemd/network/eno1.10.netdev
[Netdev]
Name=eno1.10
Kind=vlan
[VLAN]
Id=10
For what it is worth I get the same error even If i just set the Netdev kind to dummy. I am not sure if netdevs are broken or if I'm missing something
Last edited by evilhamsterman (2015-06-05 20:45:09)

evilhamsterman wrote:That did fix it. Looks like there is a small error on the wiki then because I literally copied those files from the wiki.
I'm glad you got this sorted, have you thought of editing the wiki so that no-one else runs into the same problem?
Last edited by slithery (2015-06-05 21:07:19)

Similar Messages

[Solved] Systemd in user mode not working properly

Hello.
I wrote this Systemd service that I would like to run as normal user.
[Unit]
Description=Google Drive mount
After=network-online.target
Wants=network-online.target
[Service]
ExecStart=/usr/bin/google-drive-ocamlfuse -m '/home/egidio/Google Drive'
ExecStop=/usr/bin/fusermount -u '/home/egidio/Google Drive'
[Install]
WantedBy=default.target
I start it and everything seems fine, but when I try to access the mounted point, I get this error.
[egidio@egidiolaptop user]$ ls -la ~/Google\ Drive
ls: cannot access /home/egidio/Google Drive: Transport endpoint is not connected
If I run the ExecStart command manually everything works perfectly.
Can you please help me?
Last edited by Aegidius (2015-05-13 18:17:12)

This is the output of journalctl --all
May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Activating service name='org.gnome.Terminal'
May 12 20:55:04 egidiolaptop /usr/lib/gdm/gdm-x-session[19552]: Successfully activated service 'org.gnome.Terminal'
May 12 20:55:26 egidiolaptop gnome-session[19563]: 1431456926458 addons.update-checker WARN Update manifest for {972ce4c6-7e08-4474-a285-3208198ce6fd} did not contain an updates property
May 12 20:56:03 egidiolaptop systemd[19544]: [/home/egidio/.config/systemd/user/googledrive.service:2] Unknown lvalue 'Type' in section 'Unit'
May 12 20:56:03 egidiolaptop systemd[19544]: Cannot add dependency job for unit network-online.target, ignoring: Unit network-online.target failed to load: No such file or directory.
May 12 20:56:03 egidiolaptop systemd[19544]: Created slice -.slice.
May 12 20:56:03 egidiolaptop systemd[19544]: Starting -.slice.
May 12 20:56:03 egidiolaptop systemd[19544]: Started Google Drive mount.
May 12 20:56:03 egidiolaptop systemd[19544]: Starting Google Drive mount...
May 12 20:56:03 egidiolaptop fusermount[20547]: /usr/bin/fusermount: failed to unmount /home/egidio/Google Drive: Device or resource busy
May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service: control process exited, code=exited status=1
May 12 20:56:03 egidiolaptop systemd[19544]: Unit googledrive.service entered failed state.
May 12 20:56:03 egidiolaptop systemd[19544]: googledrive.service failed.

Y Generate to File not working?

Hai,
V are facing some probelms with reports6i.
1.we are calling the report using the command line method not
run_product.for these reports 'Generate to File' menu is not working.It shows
an error like Umimplemented Error (rep-0999).How to solve this problem.
2.In one report we are using CLOB field.but when we take the print output of
this field some of the characters are missing in print out.the problem what
we think is that, there is no entre key padding when a word wrap is
occuring.We have to give it manually which is not applicable in all
cases.Please give some methods to solve these probelms.
Please treat this as an urgent matter.
thanking you,
dilip

hai,
regarding the 1st point there is one default printer attached to my m/c.but still the same error is coming. is it bcoz v r using command line arguments.but there should not be any link how u r calling the reopt.do v need to to pass any argument for doing this operations.my generate to file menu is enabled any way.pls help me to solve this problem.
regards,
dilip

Generate to File not working

Hai,
we are calling the report using the command line method not
run_product.for these reports 'Generate to File' menu is not working.It shows
an error like Umimplemented Error (rep-0999).There is one default printer attached to m/c. and the operation system is winows nt.This is working when running the report in report builder.it is not working when called through menu.Pls help me to solve this problem.
dilip

Hi,
I am not sure what do you want to convey here - "It is working with Reports builder and not working with menu". From Report builder, only way to generate the otput to file is to go through menu, there are no other shortcut or toolbar icon present. Do you want to say, it works when you run to previewer but is failing when you generate to a file. To give you a hint:
1. Does the problem exist with only this report or with all the reports?
2. If the problem is with all the reports, then there is a setup problem.
3. Try running PRINTER DRIVER TEST against your printer, to check it is ok?
4. Check that the login under which you are trying to run the report, has the priviledge to print with this default printer.
5. Try changing the printer driver?
If this does not solve the problem, please contact Oracle support to resolve this issue.
Thanks,
Rohit

[SOLVED] Suspend to ram / disk not working in newer kernels

Hi all,
this puzzles me for a while:
My desktop system was able to suspend to ram / disk flawlessly in older kernels. It stopped working with 3.3. The suspend seems to work, the machine goes to standby. But when I try to resume, the machines is on but the screen stays black. Neither the console is working nor can I ssh into it. Only hard reset gets me out here
I did investigate and found many tips and hints which all led to nowhere. I even changed my filesystem back from btrfs to ext4 and my VGA module from proprietary nvidia to nouveau.
When this all failed I got to the idea to burn several install disks. One of the official 2011.08.19 (kernel 3.0.3) and one of the snapshots 2012.06.05_04-00-01 (kernel 3.3.7) and 2012.07.17_04-00-01 (kernel 3.4.4). I guess these can not be compromised by some hosed installation. I started one by one and issued the follwing command:
echo mem > /sys/power/state
which suspends the machine successfully in all three cases. With 2011.08.19 the resume is working but the other two fail. Some more info about the hardware:
1. lspci output
harvey@obelix ~ $ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:05.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 3 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.3 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)
02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
3f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
3f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
3f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
3f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
3f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
3f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
3f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
3f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
3f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
3f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
3f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
2. lsmod output of 2012.07.17_04-00-01:
harvey@obelix ~ $ lsmod
Module Size Used by
fuse 68768 0
tun 15297 0
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
btusb 11764 0
joydev 9991 0
bluetooth 190551 22 bnep,btusb,rfcomm
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
snd_hda_intel 24053 3
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
microcode 12185 0
i7core_edac 17477 0
snd_hwdep 6300 1 snd_hda_codec
i2c_i801 8180 0
iTCO_wdt 12813 0
snd_pcm 74958 2 snd_hda_codec,snd_hda_intel
r8169 49386 0
coretemp 5654 0
edac_core 36656 3 i7core_edac
iTCO_vendor_support 1929 1 iTCO_wdt
serio_raw 4653 0
pcspkr 1899 0
snd_page_alloc 7185 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
mii 4123 1 r8169
snd 58997 12 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5410 1 snd
acpi_cpufreq 5933 0
mperf 1235 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
usbhid 36430 1 hid_logitech
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
usb_storage 44760 0
pata_acpi 3408 0
ata_piix 23160 5
crc32c_intel 1987 0
ahci 20549 0
libahci 20023 1 ahci
ata_generic 3295 0
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
uhci_hcd 23372 0
xhci_hcd 81440 0
ehci_hcd 40994 0
usbcore 147533 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784289 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64288 1 nouveau
drm 208926 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
ext4 424175 4
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
3. /var/log/pm-suspend.log of a not working suspend
Initial commandline parameters:
Tue Jul 17 11:21:18 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux obelix 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
ext4 424175 3
jbd2 73919 1 ext4
mbcache 5977 1 ext4
btusb 11764 0
bluetooth 190551 22 bnep,btusb,rfcomm
crc16 1359 2 ext4,bluetooth
joydev 9991 0
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
microcode 12185 0
coretemp 5654 0
serio_raw 4653 0
snd_hda_intel 24053 5
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
pcspkr 1899 0
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74958 3 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
r8169 49386 0
i7core_edac 17477 0
snd_timer 18966 1 snd_pcm
edac_core 36656 3 i7core_edac
mii 4123 1 r8169
snd 58997 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
iTCO_wdt 12813 0
i2c_i801 8180 0
soundcore 5410 1 snd
iTCO_vendor_support 1929 1 iTCO_wdt
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
btrfs 710578 1
libcrc32c 1002 1 btrfs
zlib_deflate 20436 1 btrfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
usbhid 36430 1 hid_logitech
usb_storage 44760 0
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
pata_acpi 3408 0
ata_piix 23160 5
ata_generic 3295 0
uhci_hcd 23404 0
crc32c_intel 1987 1
ahci 20549 0
libahci 20023 1 ahci
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
xhci_hcd 81472 0
ehci_hcd 41026 0
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784321 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64320 1 nouveau
drm 208958 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
total used free shared buffers cached
Mem: 8173500 884060 7289440 0 3764 405872
-/+ buffers/cache: 474424 7699076
Swap: 8386556 0 8386556
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Tue Jul 17 11:21:18 CEST 2012: performing suspend
This seems to be a kernel bug. Any input?
Harvey
Last edited by Harey (2012-08-06 13:51:49)

Another life-sign. The issue is still unsolved but I've come a little further. It seems to be a combination of more failures. The first one is USB hardware. I have a usb keyboard-mouse combo from Logitech (comfort cordless desktop). The USB bus does not wake up correctly when resuming from suspend. So my keyboard is unsuable. I put in a file /etc/pm/sleep.d/20_custom-ehci_hcd with the following content:
BUSES="0000:00:1a.7 0000:00:1d.7"
case "${1}" in
hibernate|suspend)
# Switch USB buses off
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/unbind
done
resume|thaw)
# Switch USB buses back on
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/bind
done
esac
The bus IDs were taken from /sys/bus/pci/drivers/ehci_hcd
When I start pm-suspend from a console (no X started) this seems to reanimate my keyboard while the screen stays black (with backlight on). I can type and reboot. Also I can ssh into the machine from my laptop.
Concerning the blank screen there seems to be a bug in both the proprietary nvidia modules as well as the nouveau driver. The nvidia folks have issued a new beta driver which seems to at least minimize the failures. This all concerns the nv50-family of nvidias cards. I have a GF8600GT which is one of these
I'll wait for this driver and then restart my testing. Until then - no suspend/hibernate
EDIT: Today's nvidia 304.32 is solving my issues - I can sleep again
Harvey
Last edited by Harey (2012-08-06 13:52:51)

Settings in .PRM file not working

Hi All, i'm using XI 3.1 with FP1.3
I want to change some settings in .PRM file (change operator 'like' to 'matches'). I do it in sqlsrv.prm which is located in BO-PATH\BusinessObjects Enterprise 12.0\win32_x86\dataAccess\connectionServer\odbc\
-> This does NOT work for WebI XI 3.1.
-> But it works for DesktopI.
-> It works for WebI XI release 2.
Any ideas how to control sql generation in WebI XI 3.1 using .PRM files or maybe there is another way to do it?
Thanks in advance.

Yes, I solved it by using this classid in the <OBJECT> tag in my HTML file:
classid = "clsid:CAFEEFAC-0014-0002-FFFF-ABCDEFFEDCBA"
The "FFFF" in the middle tells the IE browser to use the highest build of the major version of the JRE that you specifiy in the clsid. In the case of my example, above, the browser selects the highest build of JRE 1.4.2. But, the catch is that you have to install JRE 1.5.0 (I think it's 1.5.0_07) or later. Just install 1.5.0_11 and it will work. This may seem strange, but, for some reason, Sun didn't implment the fix in 1.4.

FCP Quicktime movie files not working with iDVD

I have been using iDVD for years with no issues. Now, whenever I export a QT file from FCP 7 and use it in iDVD, I get a blank screen with audio and no video.
I am able to work around the problem by using "Export Using Qucktime Conversion" and creating a smaller file, but I've never had to do that before. What in the world am I missing here? Shouldn't I be able to export as a QT movie, as long as the file is not gigantic? (the most recent one I used and had this problem occur was only about 500mb). Thanks for any help...
Ben

Hmmm,
Well this is helpful information but unfortunately didn't solve my problem. The movie in question is only 5 1/2 minutes long. When I export it as a QT movie, iDVD "acts" like everything is fine; I can preview it within iDVD, etc.But when I burn the disc, it comes out blank. I then went back to FCP and exported it using QT conversion, and the DVD burned just fine. (I exclusively use Taiyo Yuden media and have never had a bad disc).
This is just a simple 16:9 movie, shot at 720/30p on a Canon DSLR. I ingested with Log and Transfer using ProRes422, then dropped it onto the timeline, added a music track, rendered, and exported as Quicktime movie. It looks great on my desktop using the QT player, but it simply will not work in iDVD. Still stuck here...
Ben

T420s Windows 7 Offline Files Not Working

We have a new T420s laptop and the Offline Files feature in Windows 7 does not work consistently on this machine. The issue was specific to this laptop, we could run offline files on the same users on other computers which ruled out network permissions.
The Offline Files service would continually be turned off after a re-start and after hours of fighting with this machine we found that the Lenovo HyperW7 service was the cause of the problem. This service can be disabled using MSConfig or remove the Rapidboot software which initiates this service.
Lenovo technical support was absolutely useless in resolving this issue, not sure if we will be buying Lenovo in the future.
Solved!
Go to Solution.

We were able to confirm a bug within RapidBoot that affects even the latest version of the software, 1.11
At this point I would recommend to uninstall RapidBoot from all your Lenovo systems that need to use offline files, because there is not currently any solution to this problem.
Very sorry for the inconvenience caused by RapidBoot.

[SOLVED][systemd-networkd] Cant use dns or something like

[edit]
SOLUTION: You need to set a resolv.conf
[/edit]
Hi all
Im trying to use systemd-networkd and its really looks nice.
BUT I cant use any kind of dns.
At the moment, Im with this config
[Match]
Name=enp2s0
Host=my-dear-desktop
[Network]
DHCP=true
there is no error or something like on
systemctl status systemd-networkd
. I also try some other configs with static dns, nothing work.
so, i have internet/network connection, but without names =/
I have tryed many configs like UseDNS=true or DNS=8.8.8.8 at myconfig.network but nothing works.
$ ping www.google.com
ping: unknow host www.google.com
$ ping 173.194.118.145 ##google's IP##
##normal ping##
$ ping my-notebook-localname
ping: unknow host my-notebook-localname
$ ping 192.168.25.23 ##notebook local IP##
##normal ping##
Last edited by souenzzo (2014-04-30 00:52:57)

Not necessary, as your issue was specific to your system, and is unlikely to be encountered by others.
resolv.conf is provided by the filesystem package, which is of course part of every base Arch install. If it was not present on your system, somebody (or something) deleted it.

Application files not working...please help.

I have an imac g3 400MHz when i start it up it goes through its normal starting phases but without any error messages and when the color screen pops up , it freezes so the only way i can start the computer is with extensions off. Once their any application file i try to open does not work but i do get messages that read for example:"The application "Apple DVD Player" could not be opened because "ControlStripLib" could not be found". Other messages read similiarly. Can you offer any suggestions or do you require further information about my problem?
Thanks.
Rob Arrona
imac g3 400mhz Mac OS 9.0.x

Open the Servers folder inside the System Folder and throw away anything that you don't recognize, and restart your computer normally. If the issue persists, open the Extensions Manager control panel, turn off half of your extensions, and restart the machine. Repeat the process of turning off half of the remaining extensions and restarting until you've narrowed down the extension causing your issue.
The messages about items not being found are due to the extensions not being loaded.
(11587)

Edge.oam animation file not working in Muse

Anybody tell me what I'm doing wrong?
I've created an edge animation, published an .oam file and placed it on a Muse wepage (no prob).
Preview in Muse works beautifully.
Preview in browser from Muse works beautifully.
Export Muse to HTML and Edge animation not displaying – looked at the code, shows an iframe with link to edge html, but just not working.
...help please

Someone please help me with this... I dont understand where the src path should point to when updated? Can you give an example path. I am not using edge animate but instead HYPE 3 which is relatively the same thing, exports html animations as an OAM or html file. When I use the OAM in muse it previews fine in browser and in Muse. But when I publish it shows a blank box. I looked at the code and see the iframe pointing to assets/example/example.html.
I've tried exporting the Muse file as HTML after I've placed the OAM widget in Muse.. Then I navigate to the assets file and open the HTML file and try and locate the iframe code line but it does NOT exist. But if i Publish the site with Muse and OAM widget and use the developers tools I can see the iframe. After that I've tried going through filezilla to the assets folder and opening the HTML file but still NO iframe code line exists. I only find src for .js code.
PLEASE HELP... would really like to integrate these animations into my projects.
Thanks

Sharepoint 2013, event receiver to rename files not working

I coded an event receiver (ItemAdding) that renames for example a .txt file to a .text file (it does not matter the extensions, it is just an example). In my code what I do is to an SPFile.MoveTo operation. It works fine in SP2010 but when I execute
the same code in SP 2013, when the operation is done using IE I get the text "Sorry, something went wrong" and then "File Not Found".
In the logs this is what I see:
12/23/2013 15:48:49.16 w3wp.exe (0x17B0)                       0x0AC8 SharePoint Foundation
General                       ai1wu Medium System.IO.FileNotFoundException: The system cannot find the file specified.
(Exception from HRESULT: 0x80070002), StackTrace:    at Microsoft.SharePoint.SPWeb.GetFileOrFolderProperties(String strUrl, ListDocsFlags listDocsFlags, Boolean throwException, SPBasePermissions& permMask)     at Microsoft.SharePoint.SPFile.PropertiesCore(Boolean
throwException)     at Microsoft.SharePoint.SPFile.get_Length()     at Microsoft.Office.RecordsManagement.PolicyFeatures.ApplicationPages.UploadPage.OnSubmit(Object o, EventArgs e)     at Microsoft.Office.RecordsManagement.PolicyFeatures.ApplicationPages.UploadExPage.OnSubmit(Object
o, EventArgs e)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessReque... f72b639c-77b1-5045-c3a2-b23f24ae71c0
It's clear that the Sharepoint upload code tries to do things with the original name and it does not realize that it was renamed.
Can I do something from my event receiver code like using the AfterProperties to bypass this error?
Thanks

Hi Dennis,
The issue still persists. Here is the code:
        public override void ItemAdded(SPItemEventProperties properties)
            SPSecurity.RunWithElevatedPrivileges(delegate()
                try
                    OutputDebugStringA("Inside ItemAdded");
                    string szHttpUrl = properties.WebUrl + "/" + properties.AfterUrl;
                    SPWeb openedWeb = properties.Web.Site.OpenWeb(properties.Web.ID);
                    SPFile spf = openedWeb.GetFile(szHttpUrl);
                    EventFiringEnabled = false;
                    string szUrl = properties.AfterUrl;
                    szUrl = szUrl + ".renamed";
                    string szNewFileName;
                    if (szUrl.LastIndexOf('\\') != -1) szNewFileName = szUrl.Substring(szUrl.LastIndexOf('\\') + 1);
                    else if (szUrl.LastIndexOf('/') != -1) szNewFileName = szUrl.Substring(szUrl.LastIndexOf('/') + 1);
                    else szNewFileName = szUrl;
                    if (properties.ListItem != null)
                        properties.ListItem["Title"] = szNewFileName;
                        properties.ListItem.Update();
                    spf.MoveTo(szUrl);
                    EventFiringEnabled = true;
                    base.ItemAdded(properties);
                    OutputDebugStringA("Renaming to " + szUrl);
                catch (System.Exception exception)
                    OutputDebugStringA("ItemAdded ERROR: " + exception.ToString());

Delete Dataset File not working

Hi All,
I am trying to delete file from application server (AL11) directory after processing using DELETE DATASET FILE is not working , after processing also file still exists.
My code is like this,
*&      Form backup_file
      The file has been processed. Go ahead and copy it to the
      backup directory and delete it from the processing directory.
FORM backup_file .
DATA: lv_oldfile TYPE string,
        lv_backup TYPE string,
        l_rc TYPE i.
IF p_appl = 'X'. "Unix file
    lv_oldfile = wa_files-filename.
Replace the directory name with the backup directory.
    REPLACE p_dir IN wa_files-filename WITH p_back.
Tack date/time onto the end of the file name to avoid duplicate
files
    CONCATENATE wa_files-filename
                sy-datum
                sy-uzeit
              INTO wa_files-filename.
    OPEN DATASET wa_files-filename FOR OUTPUT
                                   IN TEXT MODE
                                   ENCODING DEFAULT.
    IF sy-subrc NE 0.
      f_backup_error = 'X'.
      EXIT.
    ELSE.
    Write the file contents to the new backup file.
      LOOP AT itab_input INTO wa_input.
        TRANSFER wa_input TO wa_files-filename.
      ENDLOOP.
    ENDIF.
Close the backup file.
    CLOSE DATASET wa_files-filename.
Delete the original file from the processing directory.
if sy-subrc = 0.
    DELETE DATASET lv_oldfile.
endif.
endform.
Thanks Everyone!

HI,
You have to check the value of Sy-subrc after the delete statement,
and the value present in the variable lv_oldfile that if there is correct
value in the variable populated or not.
Moreover after assigning the value to variable lv_oldfile in the step
lv_oldfile = wa_files-filename.
then you should use this variable lv_oldfile only for open dataset and close dataset also.
Hope ir helps
Regards
Mansi

Calendar Alarm Open FIle not working in Mountain Lion

Recently upgraded my mac mini server to 10.8.2 Mountain Lion. I need it to open a particular Filemaker file every morning, and close the application every night. Used to have a simple alarm in iCal set to do this with Open File and then a very simple Automator script to close the program at a scheduled time, also in iCal. Worked fine. Now, in trying to recreate this, it doesn't work - I make the scripts, and if I set them for a time I can test them (ie. 5 minutes from now), they work as planned, but they will not function on their own at the scheduled time. I thought it might be going to sleep, so I set Energy Saver to Never go to sleep, unchecked "Put hard disks to sleep when possible", and checked "Wake for network access". Still not working. Any thoughts? Any idea how to even troubleshoot this?

I thought I was on to something, but then I re-read your post and saw that you've successfully tested your scripts in Calendar. So, all I've got left to offer is a silly question: has the calendar been set to ignore alerts? I ask because just within the last few days I created an Automator calendar alarm, tested it successfully (in the same fashion as you), and set it off to run on its merrily-scheduled way, only to discover it wasn't firing on its own. Like you, I double-checked my Energy Saver settings and it looked like things should work just fine. What I finally found was that at some point during all my testing and fiddling I'd ticked the "Ignore alerts" box for the calendar, and that's what was keeping my script from firing.

Animated gif files not working in FF5 ok in every other browser

Hi .
I am having problems getting animated gifs to play in firefox 5 i am using a photo gallery script to show these files it works in every other browser i have access to (most of them on Linux and windows Xp and win7 ) if i use FF5 as a file manager and navigate to the files they run but not from a web page this is only with firefox 4 and 5 not got previous to 4 to test .

Right . this looks like it may be a problem with the way FF5 is handling various methods of viewing images i use the following code .
<pre><nowiki><a class="thumbnail" href="#thumb"><img src="photos/IMG_7039 EOS-1D Mark III copy.jpg" width="100px" height="75px" border="0"><span><img src="photos/Animations/IMG_7039 EOS-1D Mark III copy.gif"></span></a></nowiki></pre>
along with css .
<pre><nowiki>(
.gallerycontainer{
position: relative;
/*Add a height attribute and set to largest image's height to prevent overlaying*/
.thumbnail img{
border: 1px solid blue;
margin: 0 5px 5px 0;
.thumbnail:hover{
background-color: transparent;
.thumbnail:hover img{
border: 1px solid blue;
.thumbnail span{ /*CSS for enlarged image*/
position: fixed;
background-color: lightyellow;
padding: 5px;
left: -600px;
border: 1px dashed gray;
visibility: hidden;
color: black;
text-decoration: none;
.thumbnail span img{ /*CSS for enlarged image displays the large image*/
border-width: 4;
padding: 12px;
.thumbnail:hover span{ /*CSS for enlarged image*/
visibility: visible;
top: 0;
left: 230px; /*position where enlarged image should offset horizontally */
z-index: 50;
)</nowiki></pre>
to create the gallery now if i navigate directly to the dir with the gif images in they work ok but if i use the gallery method they fail .
Tried safe mode no addons no change ..

[Solved] systemd-networkd netdev files not working

Similar Messages

Maybe you are looking for