[SOLVED] Trouble using WiFi

I haven't had problems with this before, but then again, I don't use WiFi a whole lot.
ArchLinux simply cannot use WiFi, even if it's connected. I'm not sure why that is. I am connected using the GNOME interface and what I assume is NetwokManager, although I'm not sure. I have done a lot of Googling but I can't seem to find any solutions, mainly because I don't know what is causing the problem.
Any ideas on what to do? How to diagnose the problem? How to fix it?
Last edited by Binero (2014-04-06 17:36:34)

I know I needed to give some information, but my question also was how to diagnose the problem. I had no idea what to do still. Also for some reason GNOME seems to have stopped detecting WiFi networks as well. Not sure why that is, I've not changed any settings.
lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 02)
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06)
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06)
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 06)
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 06)
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06)
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06)
00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 06)
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a6)
00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 06)
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 06)
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 06)
02:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] [1002:68c1]
02:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Redwood HDMI Audio [Radeon HD 5000 Series] [1002:aa60]
08:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01)
14:00.0 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. 1394 OHCI Compliant Host Controller [1217:10f7] (rev 01)
14:00.1 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD Controller [1217:8120] (rev 01)
14:00.2 Mass storage controller [0180]: O2 Micro, Inc. Integrated MS/MSPRO/xD Controller [1217:8130] (rev 01)
20:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 03)
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
ff:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
ff:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)
ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp32s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether 00:26:b9:ed:6e:7e brd ff:ff:ff:ff:ff:ff
3: wlp8s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether c4:46:19:a3:5c:76 brd ff:ff:ff:ff:ff:ff
iw list
Wiphy phy0
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
Coverage class: 0 (up to 0m)
Device supports RSN-IBSS.
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP (00-0f-ac:4)
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
Band 1:
Capabilities: 0x70
HT20
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412 MHz [1] (19.0 dBm)
* 2417 MHz [2] (19.0 dBm)
* 2422 MHz [3] (19.0 dBm)
* 2427 MHz [4] (19.0 dBm)
* 2432 MHz [5] (19.0 dBm)
* 2437 MHz [6] (19.0 dBm)
* 2442 MHz [7] (19.0 dBm)
* 2447 MHz [8] (19.0 dBm)
* 2452 MHz [9] (19.0 dBm)
* 2457 MHz [10] (19.0 dBm)
* 2462 MHz [11] (19.0 dBm)
* 2467 MHz [12] (19.0 dBm) (no IR)
* 2472 MHz [13] (19.0 dBm) (no IR)
* 2484 MHz [14] (disabled)
Band 2:
Capabilities: 0x70
HT20
Static SM Power Save
RX Greenfield
RX HT20 SGI
RX HT40 SGI
No RX STBC
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 5180 MHz [36] (21.0 dBm)
* 5200 MHz [40] (21.0 dBm) (no IR)
* 5220 MHz [44] (21.0 dBm)
* 5240 MHz [48] (21.0 dBm) (no IR)
* 5260 MHz [52] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5280 MHz [56] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5300 MHz [60] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5320 MHz [64] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5500 MHz [100] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5520 MHz [104] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5540 MHz [108] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5560 MHz [112] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5580 MHz [116] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5600 MHz [120] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5620 MHz [124] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5640 MHz [128] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5660 MHz [132] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5680 MHz [136] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5700 MHz [140] (21.0 dBm) (no IR, radar detection)
DFS state: usable (for 1457431 sec)
* 5745 MHz [149] (21.0 dBm) (no IR)
* 5765 MHz [153] (21.0 dBm) (no IR)
* 5785 MHz [157] (21.0 dBm) (no IR)
* 5805 MHz [161] (21.0 dBm) (no IR)
* 5825 MHz [165] (21.0 dBm) (no IR)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* connect
* disconnect
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
software interface modes (can always be added):
* AP/VLAN
* monitor
interface combinations are not supported
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports low priority scan.
Device supports scan flush.
Device supports AP scan.
systemctl --no-pager
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys-fs-binfmt_misc.automount loaded active running Arbitrary Executable File Formats File System Automount Point
sys-devices-pci0000:00-0000:00:01.0-0000:02:00.0-backlight-acpi_video0.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:02:00.0/backlight/acpi_video0
sys-devices-pci0000:00-0000:00:01.0-0000:02:00.0-drm-card0-card0\x2dLVDS\x2d1-radeon_bl0.device loaded active plugged /sys/devices/pci0000:00/0000:00:01.0/0000:02:00.0/drm/card0/card0-LVDS-1/ra
sys-devices-pci0000:00-0000:00:1b.0-sound-card0.device loaded active plugged 5 Series/3400 Series Chipset High Definition Audio
sys-devices-pci0000:00-0000:00:1c.1-0000:08:00.0-bcma0:0-ieee80211-phy0-rfkill0.device loaded active plugged /sys/devices/pci0000:00/0000:00:1c.1/0000:08:00.0/bcma0:0/ieee80211/phy0/rf
sys-devices-pci0000:00-0000:00:1c.1-0000:08:00.0-bcma0:0-net-wlp8s0.device loaded active plugged Wireless 1520 Half-size Mini PCIe Card
sys-devices-pci0000:00-0000:00:1c.5-0000:20:00.0-net-enp32s0.device loaded active plugged RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda1.device loaded active plugged TOSHIBA_MK5056GSY DellUtility
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda2.device loaded active plugged TOSHIBA_MK5056GSY RECOVERY
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda3.device loaded active plugged TOSHIBA_MK5056GSY OS
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda4.device loaded active plugged TOSHIBA_MK5056GSY 4
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda5.device loaded active plugged TOSHIBA_MK5056GSY 5
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda-sda6.device loaded active plugged TOSHIBA_MK5056GSY 6
sys-devices-pci0000:00-0000:00:1f.2-ata1-host0-target0:0:0-0:0:0:0-block-sda.device loaded active plugged TOSHIBA_MK5056GSY
sys-devices-pci0000:00-0000:00:1f.2-ata5-host4-target4:0:0-4:0:0:0-block-sr0.device loaded active plugged Optiarc_DVD+_-RW_AD-7640S
sys-devices-platform-serial8250-tty-ttyS0.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS0
sys-devices-platform-serial8250-tty-ttyS1.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS1
sys-devices-platform-serial8250-tty-ttyS2.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS2
sys-devices-platform-serial8250-tty-ttyS3.device loaded active plugged /sys/devices/platform/serial8250/tty/ttyS3
sys-module-configfs.device loaded active plugged /sys/module/configfs
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subsystem-net-devices-enp32s0.device loaded active plugged RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
sys-subsystem-net-devices-wlp8s0.device loaded active plugged Wireless 1520 Half-size Mini PCIe Card
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File System
proc-sys-fs-binfmt_misc.mount loaded active mounted Arbitrary Executable File Formats File System
run-user-1000-gvfs.mount loaded active mounted /run/user/1000/gvfs
run-user-1000.mount loaded active mounted /run/user/1000
sys-fs-fuse-connections.mount loaded active mounted FUSE Control File System
sys-kernel-config.mount loaded active mounted Configuration File System
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
systemd-ask-password-console.path loaded active waiting Dispatch Password Requests to Console Directory Watch
systemd-ask-password-wall.path loaded active waiting Forward Password Requests to Wall Directory Watch
session-2.scope loaded active abandoned Session 2 of user jeroen
session-5.scope loaded active running Session 5 of user jeroen
accounts-daemon.service loaded active running Accounts Service
colord.service loaded active running Manage, Install and Generate Color Profiles
dbus.service loaded active running D-Bus System Message Bus
gdm.service loaded active running GNOME Display Manager
kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
netctl@wlp8s0\x2dJesus.service loaded failed failed Automatically generated profile by wifi-menu
NetworkManager.service loaded active running Network Manager
polkit.service loaded active running Authorization Manager
rtkit-daemon.service loaded active running RealtimeKit Scheduling Policy Service
systemd-backlight@backlight:acpi_video0.service loaded active exited Load/Save Screen Backlight Brightness of backlight:acpi_video0
systemd-backlight@backlight:radeon_bl0.service loaded active exited Load/Save Screen Backlight Brightness of backlight:radeon_bl0
systemd-binfmt.service loaded active exited Set Up Additional Binary Formats
systemd-hostnamed.service loaded active running Hostname Service
systemd-journald.service loaded active running Journal Service
systemd-localed.service loaded active running Locale Service
systemd-logind.service loaded active running Login Service
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
[email protected] loaded active exited Load/Save RF Kill Switch Status of rfkill0
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Boot/Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power management
[email protected] loaded active running User Manager for UID 1000
wpa_supplicant.service loaded active running WPA supplicant
-.slice loaded active active Root Slice
system-getty.slice loaded active active system-getty.slice
system-netctl.slice loaded active active system-netctl.slice
system-systemd\x2dbacklight.slice loaded active active system-systemd\x2dbacklight.slice
system-systemd\x2drfkill.slice loaded active active system-systemd\x2drfkill.slice
system.slice loaded active active System Slice
user-1000.slice loaded active active user-1000.slice
user.slice loaded active active User and Session Slice
dbus.socket loaded active running D-Bus System Message Bus Socket
dmeventd.socket loaded active listening Device-mapper event daemon FIFOs
lvmetad.socket loaded active listening LVM2 metadata daemon socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility Named Pipe
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-udevd-control.socket loaded active running udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
dev-sda5.swap loaded active active /dev/sda5
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User System
network.target loaded active active Network
paths.target loaded active active Paths
remote-fs.target loaded active active Remote File Systems
slices.target loaded active active Slices
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
timers.target loaded active active Timers
systemd-tmpfiles-clean.timer loaded active waiting Daily Cleanup of Temporary Directories
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
102 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
uname -a
Linux localhost 3.13.8-1-ARCH #1 SMP PREEMPT Tue Apr 1 12:19:51 CEST 2014 x86_64 GNU/Linux

Similar Messages

  • Trouble using wifi exclusively.

    Hello there,
    I am totally new to the forums here, but I got my first blackberry ages ago, since then I have worked my way through an 8330, a curve, and eventually a bold 9900.  I loved them all, but I had a couple of issued, with the bold that had me stray over to a Galaxy S4.  Now with the Q20 on the horizon and the large availability of apps not available on its predicessor (namely skype), I really want to come back over.
    The problem I was running into on my 9900 is that I work offshore and we don't have network coverage as soon as we get on the helicopters.  When I started doing this my 9900 seemed to operate just fine on wifi alone except that I had no text or voice.  But then about a year and a half ago it just stopped connected to anything requiring a blackberry enterprise services, namely yahoo messenge and BBM.  I am not sure if this is a problem with the phone or just the way that blackberry works now.  I would hate to buy a new Q20 and then find out I can't use it offshore because it operates the same.  So I am really hoping that someone can shed some light on this and that I just had a bit of bad luck with my 9900, not working the way it should.
    Any insight you guys could offer would be greatly appreciates, keeping in mind that I am overseas as we speak and have no access to that handsett for about 2 weeks, but I am happy to take any advice under advisement.
    Cheers!

    BB10 does not require any kind of specific BlackBerry data plan so it will do everything on wifi with exception of phone and sms. 
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Im having trouble using bbciplayer on my ipad it says i need to switch to wifi but im already connected can any one help?

    im having trouble using bbciplayer on my ipad it says i need to switch to wifi but im already connected can any one help? I ve uninstalled/ reinstalled  switched it on and off what next?

    Did you try downloading the movie from iTunes on your iPad?  I know it takes longer but I'd try that. 
    Also try to reset all settings. 
    Settings > General > Reset. Reset all settings. 

  • Drop in speed using WiFi. Does a powerline solve t...

    Upgraded to Infinity 2. Plug my laptop into the hub using the ethernet cable. Speed 55M.
    Remove the cable and use WiFi, speed drops to 35. Laptop 10 metres away from hub (although the result is the same if I take the laptop to within a foot of the hub)
    Done all the necessary to make sure it's on the best channel etc.
    Does the purchase and use of a pair of Powerline adaptors (ie plug the hub into the power socket using an ethernet cable and the laptop into another power plug..on the same circuit..using another cable) effectively mean that I should then get the 55M speed?
    Any advice will help. Keep it as non technical as possible, please.

    There are a couple of pages with information about wireless, and network connections, which have some sample diagrams.
    Wireless connection problems
    Network connection problems and possible solutions
    Powerline adapters normally work quite well.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • TS1398 After upgrade to iOS 6 i am not able to use wifi.

    Connected, but no wifi traffic (at home).
    After upgrade to iOS 6 i am not able to use wifi. I am connected to my home wifi but no trafic is coming through (safari, skype, twitter, app store). I have even tried recovery of my iPhone 4S using iTunes as well as using iPhone. But without effect.
    Can not connect at all (at work).
    Thank you for helpfull advice.
    Vladimir
    Please do not give me advice like:
    switch proxy to auto
    turn the flight mode on and off
    turn the iphone on and off
    release the ip
    recovery the network settings
    recovery firmware
    I have tried all these, but did not work.
    PS to apple:
    I really did not expect this kind of trouble. If I would want to waste my time "repairing my device", I would buy an android phone!!!!!!

    This helped me solve the problem:
    I have changed the security from TKIP to AES and now my wifi works fine /sofar/.
    Targat

  • Asha 302 doesn't want to use WiFi

    So I'm a user of Nokia Asha 302 and though I generally love the phone, one problem just gives me nightmares.
    Namely, I can't do almost anything requiring WiFi. The only thing that works is the stock browser - if I want to use the built-in email client, it gives me "connection error, please try again later" prompt. If i want to install opera - same thing, I can download the package from the Ovi Store but as soon as installation starts, it requires my GPRS connection rather than the WiF that it's connected to and which is working.
    I have WiFi set as defaut and always select it as the desired connection method when asked to but it just doesn't work. How can I force the phone to use WiFi for such tasks and not my packets which I have to pay for?
    I googled my head off and found absolutely nothing. The onky method I found involved adding some custom configs like "my web" and such and even though I followed the instructions, it hadn't helped a bit.
    Could someone please tell me how to fix it?
    Solved!
    Go to Solution.

    Hello,
    Setting the mobile APN manually might help so that the phone will use WiFi when available. Please check these links for the steps required:
    http://developer.nokia.com/Community/Wiki/Manual_internet_settings_for_Nokia_Asha_and_Series_40_phon...
    http://discussions.nokia.com/t5/Pool-of-Knowledge/Manual-internet-settings-for-Asha-and-other-Nokia-...
    Nokia Lumia 520 3046.0000.1329.2001 RM-914
    Nokia Asha 302 V15.09 22-05-13 RM-813

  • How can you manage data usage when cellular data is off, but you are using WiFi where your WiFi provider charges for data use?

    I spend quite a few months each year in Canada where I use a Telus Cellular Hub device which is also my WiFi Router.  My iPhone 5 has Cellular Data set to "Off" which insures I won't be charged via my Verizon Wireless Service Provider for charges while in Canada.  Trouble is Telus, Rogers and all the Canadian Internet Providers charge for all Data going through their Systems.  Again, My Cellular Data on the iPhone 5 is turned off, but I use WiFi for such things as checking the Weather, or FaceBook, or searching the Web. 
    I believe that things may be happening in the background from various Apps that use quite a lot of Data.  It could be that iCloud is part of the issue with things being backed up automatically.  It also could be that Apps like AP or other News Apps are sending large amounts of Data in the photos associated with their New Stories, etc.  I typically turn off the App Store "Updates" such that they don't automatically load.  The FaceBook works now posted videos play when you are just scrolling through the News Feed. 
    I have been trying to fine an article somewhere which focuses on this specific problem but unfortunately many if not most articles are about folks worried about using Cellular Data while in a WiFi environment when their Cellular Data is turned on. 
    Does anyone know of a fairly comprehensive article about what settings on which Apps might reduce the Data Usage when Cellular Data is turned "Off" but you are going through a Service Provider who charges for all Data Accessed even when you are using WiFi?

    Thanks for your comments, it is clear you understand my plight.  The trouble is fully understanding what Apps and App Features are transferring data in the background any time you happen to turn WiFi to on (even if you have had it off most of the day or night).  Obviously things like Location Services can constantly be sending and receiving data from my iPhone without any action on my part.  Also if you have things like photo backup on the iCloud then each time you take a photo you are sending a copy out.  All App Updates if set to Automatic also can add up to quite a bit of Data.  Reading the News on AP or scrolling through FB News Feed is actually adding up to a lot of Data.  There could be other culprits that I am not even thinking of.  I don't want to turn Apps like Find My Phone off or turn iCloud off due to loosing the value of such a program entirely.  Again thanks for your quick response. 

  • I lost the ability to use wifi after the 8.02 update.  Is there a way to fix this?  I've already tried resetting network.  Turned the phone off and on. Nothing is working and now I have to run on just data.

    I lost the ability to use wifi after the 8.02 update.  Is there a way to fix this?  I've already tried resetting network.  Turned the phone off and on. Nothing is working and now I have to run on just data.

        csdwarf,
    So sorry to hear about the trouble with Wi-Fi! Let's get that working the way it should. Could you provide us some more details regarding where this breakdown occurs? Are you having trouble with turning Wi-Fi on or connecting to your Wi-Fi? Are other devices connecting to your Wi-Fi without issue?
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • 4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes on for a while and goes off in a few minutes The phone is unable to scan networks available for use

    4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes ON for a while and goes off in a few minutes The phone is unable to scan networks available for use
    Am having ipad2, ipad mini and iphone 4 with family of two persons. One hp laptop and a DELL professional computer also in operation
    Myself an engineer for projects
    Looks the company apple cannot grow if they do not support solving the problems of their existing customers
    Ashok Dhingra
    India

    You are not addressing Apple here. If you have a problem, describe it and someone might be able to help. Just to be sure, the wi-fi on the phone will go off after the phone goes into sleep mode unless it is actively being used. This is a battery saving measure. If you are actively using the internet, and the phone is still awake, then the wi-fi should remain connected.
    What troubleshooting steps have you tried.

  • E6-00 and Belle update : Cannot use Wifi and LEAP ...

    Upgraded the E6-00 yesterday. First issues arise and even after a full reset, it still does not work.
    - Wifi connection using LEAP authentication
    Network is found, popup to enter username and password, all is good. Except the phone keep trying to connect while I type the password and each time, it re-ask the username. In short I cannot use connect at all as I don't have time to enter both username and password before it loop.... No more wifi connection possible as it use this LEAP authentication. Any way to increase the connection retry timeout ?
    - IMAP folder not found
    Same config as under Anna, but under Belle, it does not find any folder for IMAP account (and yes, the mail root folder is right), refreshing the folder list, just do nothing.
    - MAPS
    Say that it's empty and need maps. Give few options:
       * use OVI on the PC : OVI doesn't find MAP on the phone
       * use wifi to download map : .... if wifi would work, why not
    Anybody else got the same issue ? Or found solution ?
    L.\
    Solved!
    Go to Solution.

    Upgraded the E6-00 yesterday. First issues arise and even after a full reset, it still does not work.
    - Wifi connection using LEAP authentication
    Network is found, popup to enter username and password, all is good. Except the phone keep trying to connect while I type the password and each time, it re-ask the username. In short I cannot use connect at all as I don't have time to enter both username and password before it loop.... No more wifi connection possible as it use this LEAP authentication. Any way to increase the connection retry timeout ?
    Ok try to delete your apn, reset the device and resintall the OS. Don't restore any backup ans configure the WLAN apn: settings> connectivity> settings>destinations. Into the WLAN settings go to WI-fi security settings> in the fifrst field select EAP> in the second field EAP plugin settings > select EAP-LEAP.
    This way the apn will work again
    - IMAP folder not found
    Same config as under Anna, but under Belle, it does not find any folder for IMAP account (and yes, the mail root folder is right), refreshing the folder list, just do nothing.
    Please delete your mailboxes and configure them as you want. To create a IMAP access mailbox , for example Nokia Mail (outside of Messaging server) select Other. Put you credentials and choose Standard. You will see into Settings> your mailbox > sync content > Folder subscriptions> choose which folder to sync and it's done
    - MAPS
    Say that it's empty and need maps. Give few options:
       * use OVI on the PC : OVI doesn't find MAP on the phone
       * use wifi to download map : .... if wifi would work, why not
    Anybody else got the same issue ? Or found solution ?
    Please delete on mass memory the folder Cities and the file Qf, then open Maps and close the application. Verify that the folder Cities and the file Qf are again in E. Connect your device to Nokia Suite and redownload the cartography. 

  • Trouble using AirPlay between iMac and AppleTV

    I'm running OS X Lion 10.7.5 and I'm having trouble using AirPlay between iMac and AppleTV (2nd Gen).  It used to work fine, but for some reason it just stopped responding.  I can see my media on my iMac from AppleTV and I can see AppleTV from my iMac when attempting to use AirPlay.  However, when I try to pull or push media from my iMac to AppleTV it just stalls and never loads.  AirPlay works fine from my iPhone and iPad with AppleTV - it's limited to my iMac only. 
    I'm using a Netgear R7000 wireless router and a Netgear AC120 WiFi Extender and as such, I have 4 available wireless networks (2 from the router and 2 from the extender / 2 - 2.4 GHz and 2 - 5 GHz).  My internet access is great and my network performance is good across the board.  All of my software/firmware is up to date (iMac, AppleTV and router/extenders). I've tried all combinations (mixing/matching) all of my wireless networks between devices (iMac/AppleTV) - nothing makes a difference (again, AirPlay works fine between my mobile devises/AppleTV).  Netgear Genie has been making changes to my network settings as new firmware has been installed in both the router and extender.  I'm guessing there is something screwy going on with the network settings on the iMac, but I can't figure it out.
    Anyone have any suggestions?
    Thanks!

    I'm glad you got it all working. Out of interest, how do you (or your son) connect to the internet now? Is it just a dial-up connection? If it is, I am sure you know that, even if you get the Apple TV to share the connection, the speed will seriously limit the use of many of the Apple TV's features.
    The Airport Extreme is a great router but you will need a DSL or cable modem as well as it won't connect to the internet without one. There are many great (and cheaper!) combined modem/routers available if your son wants to get a high-speed network up and running at lower cost. Any other computers, phones, games consoles etc that you may have in the house can then all connect easily.
    I hope that I have helped a little and I will look out for future posts in case I can help again.

  • Trouble using facetime on another device with same apple id

    Hi
    I am having trouble using facetime with my wife.  I have an iPad 2 and she has an IPhone 4S.  When we try to facetime, we are able to connect for a few seconds and then it drops off.  We are then unable to reconnect.  We both have the same apple Id and e-mail address although I am trying to contact her via her mobile number.  Any suggestions would be grateful received.

    Get an email address (free gmail.com) to use on the iPad.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    iOS: FaceTime is 'Unable to verify email because it is in use'
    http://support.apple.com/kb/TS3510
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
    You can check the status of the FaceTime/iMessage servers at this link.
    http://www.apple.com/support/systemstatus/
     Cheers, Tom

  • Using Wifi in the U.S. With my BB Torch 9800

    So last week I traveled to the United States and I was told that I would be able to connect to the internet using WIFI.  First thing I did was go to MANAGE CONNECTIONS and go to MOBILE NETWORK and turn off DATA SERVICES and WHILE ROAMING.
    Then I selected WIFI PREFERED under CONNECTION PREFERNCE.
    I then connected to the free WIFI that was available at the coffee shop.  When I tried to connect to the browser I got an error message "UNABLE TO CONNECT TO THE INTERNET, PLEASE CONTACT YOUR SERVICE PROVIDER"  So I went to a kiosk and contacted ROGERS my SP.  They assured me that on their end all the steps that I mentioned above were correct and that I need to RIM.  Now I've been various user forums on-line and there is no real solution or fix to this problem.  Some forums suggest that I need to have this phone unlocked in order to use the WIFI feature in other countries.  Does anyone have any suggestions or know of any solutions to this problem.
    Thanks

    You can't turn off data services otherwise nothing will work, not even wifi. The best way to do what you were wanting is to just turn off "while roaming."
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Can't use WIFI and the battery consumption goes much faster

    I can't use WIFI after my iphone4s was updated to ios6.0  and the battery consumption goes much faster, how to solve ?

    This seems to be a problem relatet to the current versions of the app. After uninstalling Spotify I installed an older version, 2.8.0.1081, which worked perfectly with wifi. No newer versions seem to work so I hope there will be a fix soon. I've tried changing the UPnP as well as NAT filtering settings, but the newer versions of the app still wont work.

  • Trouble using Cut & Paste function

    I am having trouble using any type of cut and paste function
    in Dreamweaver......I have tried using "ctrl c" and "ctrl v", have
    tried using right click mouse function with drop down menu for
    cutting and pasting, and using the edit (top bar) cut and paste
    functions. Nothing works.......it doesn't matter whether I cut and
    paste within Dreamweaver or whether I cut from a word document and
    paste into Dreamweaver. It just doesn't work. Any ideas on how to
    fix this issue? I understand this SHOULD be working.

    Did the problem just occur out of the blue? Was Cut &
    Paste working OK for
    a while? Can you think of anything you changed between when
    it worked and
    when it broke?
    See if this workaround solves the problem:
    Re-creating the Dreamweaver user configuration folder on
    Windows
    http://www.adobe.com/go/36bda422
    Please post back whether this solves it or not.
    Thanks,
    David Alcala
    Adobe Product Support

Maybe you are looking for

  • My Apple BT Keyboard won't pair.

    I have an Apple BT Keyboard and it worked fine until yesterday. I came home and turned it on and it wasn't working right. It kept inputing random charactors whenever i was able to type. I took out the batteries for like an hour then tried it again bu

  • Keep getting error code 10657 when I try to open certain applications?

    Hi! I keep getting an error code when I try to open certain applications, such as iTunes or Adobe PhotoShop... it reads error 10657?

  • HT203167 Downloaded a movie and it still will not play. It says loading for about10 seconds and stops.

    Can anyone help? I downloaded a movie and it says downloaded successfully, but the movie will not load to play.

  • CreateJS MouseEvent

    Hi, I am trying to convert an AS3 file to HTML5. The createJS extension for flash seems like a great tool but I am experiencing some difficulties. My application cycles through an xml list of buttons, creates an object for each, collects the JS file

  • Two SLDs in the landscape

    Hi We have ECC6.0, BI and EP7.0 (Nw2004s) in 3 different boxes (one for each). The Sld is configured in the BW box. Now I would like to configure the SLD in the EP box. Is there way where I can transport the SLD to the Ep system? If yes How? Also if