Two SLDs in the landscape

Hi
We have ECC6.0, BI and EP7.0 (Nw2004s) in 3 different boxes (one for each). The Sld is configured in the BW box. Now I would like to configure the SLD in the EP box.
Is there way where I can transport the SLD to the Ep system? If yes How?
Also if I create a 2nd SLD in the network will i cause any problem, what are the considerations I need to make.
please let me know
Thank you
-Regards
Luke

Hi Luke,
I'm not sure if you can transport (move) the SLD from one box to another. I do know you can have multiple SLDs in the landscape. and you can even transfer information from one to another. You can get general SLD information here: http://service.sap.com/SLD but i found this guide helpful. http://service.sap.com/~sapidb/011000358700003772322006E
Hope this helps.
John

Similar Messages

Development over two system in the landscape

Dear SolMan gurus.
We face the following issue. Our customer wants to have 2 different systems in the landscape (CRM and R/3 system) under one project. How can we manage to create transport requests (TR) for both systems at onece. Or do I have to create one TR form one system and than create TR for second system. Is it possible ad all? We use SolMan 7.1 SP3.
Thank you for your answers.
Regards,
Petr Syka

Let us take one example
for .e you have
CR1
CRM DEV -
CRM Q-----CRM PRD
ECC DEV -
ECC Q -
ECC PRD
R/3 DEV--R/3 Q----R/3 PRD
CR 2
CRM DEV -
CRM Q-----CRM PRD
ECC DEV -
ECC Q -
ECC PRD
R/3 DEV--R/3 Q----R/3 PRD
now say for e.g CR1 has all the work completed and developer released the Task ...further TR is released and dont worry if some TR is blank that will automatically get deleted.
but CR2 has still TR open and work is going on
so in this case only the TR which is released for CR1 will get imported to respective QA by the background job.
let me know if this resolves the problem
Regards
Prakhar

Where is the landscape/protrait button on the print menu?

I want to change the orientation of a photo from landscape to portrait by cropping the two ends of the landscape view, in effect zooming in on the people and leaving out the scene. I get the photo as I like it in iPhoto using the edit feature. When I go to print, however, the program retains the original orientation and cuts off the heads of the people. How do I get the program to print what I see in iPhoto? Where is the portrait/landscapt toggle button on the print window?

It takes two trips to the crop size/ratio menu to change the orientation. After setting the print size/ratio select the same menu and look at the very bottom of it.
OT

Connecting Two SLDs in r XI Landscape

Hi Folks,
We have set up two SLDs for our XI landscape. One SLD for Development/QA and second one for Production. I have configured all the post install steps on XI Production System including SLD config steps.
I would like to know the steps for connecting both the SLDs.
I have seen number of Wlogs/forum discussions, but little bit confused on where to start. Due to shortage of time, please suggest right Wlog or any other documents which meets my requirements.
Your help in this regard would be highly appreciated.
Regards
Chandu

Hi,
just have a look at this SAP note: 720717
(it shows how to change SLD - so how to connect them too)
and this doc:
https://websmp104.sap-ag.de/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

SLD architecture in the landscape

Hi,
How many SLDs should be there in the landscape. Should there be only one SLD for DEV, QAS & PRD or should there be two SLDs; one for DEV-QAS & other for PRD or 3 SLDs; each for DEV, QAS & PRD. Also please support your replies with reasons.

Hi,
We use 2 SLD's, one for DEV, QAS and sandboxes, and another one for PRD.
The advantage is that we have a test SLD, and that the production SLD will stay clean. The disadvantage is for exemple when data from a test system needs to be sent to the PRD system, then you'll need to change the SLD connection of the system.
More info on SLD planning in the [SLD Planning Guide|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0a1a8fb-0527-2a10-f781-8b67eab16582]

Connection to central SLD through out the landscape.

Dear Basis gurus,
We have installed ERP 6.0, XI, EP, BI 7.0 systems, we decided to configure central SLD in the XI system.
EP, BI systems are configured with SLD a local configuration. we need to connect them to central SLD which is there in the XI system.
I would be greatful to you , if you can provide any guidance how to connect local SLDs which is there in BI, EP to the XI SLD.
Thanks and Regards
Purna.

From the ABAP backend systems go to RZ70 and specify the Host and Service of the PI system in the section SLD Bridge
Once done your schedule the Data collection using the execute button
For the JAVA part
Open Visual Admin from the backend systems
Go to Server0->Services->SLD Datasupplier
You supplied all the required info like "Hostname " portname etc.
After giving all this information , try to initiate a Data transfer using the icon there(above the runtime tab) its like a arrow pointing downwards.
After clicking on that icon wait for sometime and see whether you get the message "Data transfered sucessfully"
Gerard

Logical system name in SLD for the R3 buss. system is not open for input.??

Dear all,
We are upgrading to PI 7.1 and have a problem in a scenarie where PI is sending IDOC to R3.
The problem is probably related to the fact that it is not possible to write a logical system name in SLD for the R3 system. I can not read the logical system name for the R3 system into the Directory (adapter specific identifier), *because the logical system for the R3 bussines system is not an input file??*. How can i enter the logcal system name so i avoid following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_RCV_SERV</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Receiver service cannot be converted into an ALE logical system</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Regards Ugur

There are two ways....
Option 1 : Go to the BS of ur R3 system in Integration Direction. Go to edit mode mode and select Properties -> Adapter Specific attributes - > enter the LS name and save...
Option2 : You can use it from the mapping.... U either hard code/use from source the EDIDC40 section of ur mapping and the in ur IDOC receiver config select the option user
Option ! is the best soln...All the IDOC to that R3 system will go the specified LS...
regards,
Arvind R

Do XI service users have to exist in the SLD with the same password?

Hi All,
Do XI service users have to exist in the SLD with the same password?
We have a 3 system(development, QA and production) XI landscape with a single SLD. All systems are NW04s with support stack 9.
We are required to change XI service user passwords. I have found OSS note 936093 for changing these passwords. What I am not sure of is if I can change XI service user passwords one system at a time. I am under the impression that XI service users must exist in the SLD with the same password as the XI system. If this is correct, I have to change service user passwords in all three systems at the same time which is not very feasible.
Thanks,
Hamid Lashgari

Creation and Maintain Users
For the transport of Integration Server content, it is a good idea to install CMS on an
existing Integration Server. In this double-stack scenario, where an ABAP and J2EE
stack is used, user management is different from a J2EE only installation.
Note: For more information about using CMS on a J2EE only installation, see the
CMS documentation.
The following section describes the double-stack user management settings required
when CMS is running on the Integration Server in the development environment. See
Figure 2. The description we provide starts with ABAP user management and is followed
by the maintenance in J2EE User Management Engine (UME). You proceed as follows:
Create the service user LSADMIN using transaction SU01.
Assign the ABAP roles SAP_XI_CMS_SERV_USER and
SAP_SLD_ORGANIZER to the LSADMIN service user.
Create the ABAP role SAP_CMS_ADMINISTRATOR and assign this role to the
ABAP dialog user(s) responsible for CMS administration.
In UME, create the role CMSDeveloper with the actions CMS.Display and
CMS.Export.
In UME, create the role CMSAdministrator with the action CMS.Administrate.
In UME, assign the users representing xirepuser and xidiruser to the role
CMSDeveloper.
In UME, assign the group SAP_CMS_ ADMINISTRATOR to the role
CMSAdministrator.
Log on to CMS with the ABAP dialog user responsible for CMS administration.
Maintain the CMS service user (LSADMIN) for the domain.
Task XI Dev
With CMS XI Test XI Prod
Create the service user LSADMIN in TA using transaction
SU01. Yes Yes Yes
Assign the ABAP roles SAP_XI_CMS_SERV_USER and
SAP_SLD_ORGANIZER to the LSADMIN service user. Yes Yes Yes
Create the ABAP role SAP_CMS_ADMINISTRATOR and
assign this role to the ABAP dialog user(s) responsible for
CMS administration.
Yes No No
In UME, create the role CMSDeveloper with the action
CMS.Display and CMS.Export.
Yes No No
In UME, create the role CMSAdministrator with the action
CMS.Administrate.
Yes No No
In UME, assign the group SAP_CMS_ ADMINISTRATOR to
the role CMSAdministrator
Yes No No
Log on to CMS with the ABAP dialog user responsible for
CMS administration.
Yes No No
Maintain the CMS service user (LSADMIN) for the domain. Yes No No
Figure 4: Overview of User Management Tasks in Different Systems

How to creat a Business System and Tech System in SLD for the DB2 DataBase?

Hi,
How to creat a Business System and Tech System in SLD for the DB2 DataBase?
Joseph

Hi,
Technical System
In SLD, click on technical landscape->New Technical System->WebAS ABAP.
Business System.
1.Goto Business Landscape->New Business System->Name the business system.
2. Choose the technical system that needs to be attached->WebAS ABAP->Technical System Name.
Go Through this links..
TBIT41:
https://websmp201.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT41&LANGUAGE=
TBIT42:
https://websmp206.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT42&LANGUAGE=
TBIT43:
http://www50.sap.com/useducation/curriculum/course.asp?cid=60161651
TBIT44:
https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT44
Also try elearning.
https://www.sdn.sap.com/irj/sdn/elearn
Thanks,
Satya Kumar

EHP6 upgrade with PI in the landscape

Hi All,
I realize all documentation say that you must always keep your PI boxes at the highest levels in your landscape.
I know oss note 1043047 and 954820 speak to this.
I'm just became part of a project that over looked this. We are planning a EHP6 upgrade.
This will bring in NW 731 stack right?
Our PI is old at NW 7.11
The SLD on the PI's are to the latest versions.
The project to migrate to PO is coming after ehp6.
Again this was all planned before I came on board.
Any thoughts of what to expect? I still believe it should work fine until we get to the upgrade.
If not, can anyone explain technically why not?

You should under all circumstances perform a test upgrade, on a sandbox system first.
The theory of the upgrade is one thing, the problems of doing it for real are a quiet different matter.
You can see the changes (including what new kernel version will be installed), when reviewing the stack calculation report as done by MOPz (SolMan Maintenance Optimizer).
It will tell you exactly what software component gets replaced with what other version.
Also consider the impact on development, and if you have a multi-system landscape, you gotta plane in which sequence to upgrade what server.
Last not least, consider performance impact and downtime.
I have seen PI systems so (over)utilized that they literally "cooked the hardware" they were running on.
Putting the added strain of performing an upgrade on such a system, might be the straw that breaks the camel's back.
That is why sandbox testing is so essential here.

Two SLDs with separate XI-systems behind - transport content

Hello,
we have two SLDs, one for dev. Xi and one for prod XI.
So per SLD only one XI is known.
On SLD dev we implemented all required R/3 systems and included the transport groups to the systems and the transport connection (dev. syst to prod. syst).
So here the prod R/3 has as connected XI the dev XI!
Now we want to move the content of the dev SLD to the prod SLD.
What will happen to the related XI system in the business systems.
Do we have only have to change them in the destination prod. SLD?
Best regards
Dirk

Hi Shankar,
thanks for the detailed work on my question.
Unfortunately it wasn´t me who had to organize the environment.
Customer made the installation and then was asking for external consultancy.
So the situation was fixed a little bid away from simple logic.
For a go live at end of the year we will use this construction.
Next year customer plans to implement a new central SLD (including portals issues).
Then we will do another move with our SLD content.
Until then customers Xi guys can train a little bit on moving SLD content
to ensure that both SLDs have the same systems implemented.
Only to complete that:
To use transport groups you need prod XI and dev XI both on one SLD else you cannot link the R/3 systems to dev and prod area because transport groups have to be linked to the XI systems on the SLD.
So, my question was a little bit useless!
We had no prod XI available on the dev SLD.
From this issue my question was coming up.
We will add the dev XI to the prod SLD too.
Then moving content won´t cause any problems, I think!
Regards
Dirk
Message was edited by:
Dirk Meinhard

Two sided printing, the second side prints upside down, what have it done

I know that a setting has been changed, I just can't remember what I did.
When using the two sided printing the orientiation of the back side is upside down. What have I done? and how can I fix it? Help?
This question was solved.
View Solution.

Hi,
From the application used to print open the printer dialog, then click on ettings or Preferences to access to Printig Preferences dialog.
Within the Layout tab change the Print on both sides option.
For a portrait oriented document select Flip on Long Edge, for a Landscape one select Flip on Short Edge, then it will print as expected.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Synchronisation of two SLDs does not work

Hello everybody,
I try to configure a unidirectional synchronisation between two SLDs based on NW 7.0 SR3.
The first SLD is my central one. Here are all ABAP and JAVA-Systems registered. That is the part, which works as expected.
Now I want, that these information are synchronized to another (backup)-SLD. Therefor I want to use the
administration => datasupplier functionality, to add another SLD.
In the source SLD I added the "backup"-SLD URL and user/pwd.
After that I restarted the SLD -Server. But nothing happens. Must I be more patiently and wait until the registered systems actualized there information or what should I do?
Thanks a lot and have a nice weekend,
Stephan

Hi,
When the Data gets transferred from another sub-module(or I should call sub-interface) to accounting , it validates the fields according to field status group (as you said in FSG in GL Master data).
In you case it seems that the sender object has personal number mandatory and while the receiver (i.e GL in this case ) does not have the field open. Hence the error.
You could change the sender or the receiver FSG however the implications of each change needs to be analyzed.
Hope this answers your question with reasoning.
Thanks,
Mayank

HT1423 I am adding more memory, should I replace the top two slots with the 4g memory modules, then place 2g memory modules on bottom slots. Does it even matter?

I am adding more memory, should I replace the top two slots with the 4g memory modules, then place 2g memory modules on bottom slots. Does it even matter?

I am adding more memory, should I replace the top two slots with the 4g memory modules, then place 2g memory modules on bottom slots. Does it even matter?

How can two users share the same iTunes library in 10.7

I am running Lion 10.7 and there are two users on the iMac.
I would like full read/write access to our share music from either user account.
Currently I have the iTunes Media folder in users/shared and on my account it looks like a regular iTunes and in my preferences I have ticked the 'share' box, but on my wifes account she can see the shared library but the only view available is a simple list.

Try putting it on a removable drive, like a flash drive.

Two SLDs in the landscape

Similar Messages

Maybe you are looking for