[SOLVED] Trying to upgrade GRUB 1.99rc~1 to 2.00-2.

Hello,
I was trying to upgrade my version of GRUB from 1.99rc~1 to the latest version (2.00-2) which was recently installed via pacman.
I am using grub-bios with an GPT partition.
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
I am following the instructions below which are outlined on the wiki for Installing to GPT BIOS boot partitions.
# modprobe dm-mod
# modprobe part_gpt
# grub-install --target=i386-pc --recheck --debug /dev/sda
# mkdir -p /boot/grub/locale
# cp /usr/share/locale/en\@quot/LC_MESSAGES/grub.mo /boot/grub/locale/en.mo
However, I am getting the following error:
I am running the latest kernel version (3.9.4-1).
[root@fracture ~]# modprobe part_gpt
modprobe: FATAL: Module part_gpt not found.
I was wondering how I could fix this so that I could proceed with upgrading GRUB.
Thank you.
Last edited by fracture (2013-05-31 06:45:34)

Thanks. I have a new issue now which is worrying me:
usr/share/grub/themes/starfield/terminal_box_w.png /usr/share/grub/themes/starfield/theme.txt /boot/grub/themes/starfield
cp: error writing ‘/boot/grub/themes/starfield/starfield.png’: No space left on device
cp: failed to extend ‘/boot/grub/themes/starfield/starfield.png’: No space left on device
cp: error writing ‘/boot/grub/themes/starfield/terminal_box_c.png’: No space left on device
cp: failed to extend ‘/boot/grub/themes/starfield/terminal_box_c.png’: No space left on device
cp: error writing ‘/boot/grub/themes/starfield/terminal_box_e.png’: No space left on device
cp: failed to extend ‘/boot/grub/themes/starfield/terminal_box_e.png’: No space left on device
cp: error writing ‘/boot/grub/themes/starfield/terminal_box_ne.png’: No space left on device
cp: failed to extend ‘/boot/grub/themes/starfield/terminal_box_ne.png’: No space left on device
cp: error writing ‘/boot/grub/themes/starfield/terminal_box_n.png’: No space left on device
cp: failed to extend ‘/boot/grub/themes/starfield/terminal_box_n.png’: No space left on device
cp: error writing ‘/boot/grub/themes/starfield/terminal_box_nw.png’: No space left on device
cp: failed to extend ‘/boot/grub/themes/starfield/terminal_box_nw.png’: No space left on device
cp: error writing ‘/boot/grub/themes/starfield/terminal_box_se.png’: No space left on device
cp: failed to extend ‘/boot/grub/themes/starfield/terminal_box_se.png’: No space left on device
cp: error writing ‘/boot/grub/themes/starfield/terminal_box_s.png’: No space left on device
cp: failed to extend ‘/boot/grub/themes/starfield/terminal_box_s.png’: No space left on device
cp: error writing ‘/boot/grub/themes/starfield/terminal_box_sw.png’: No space left on device
cp: failed to extend ‘/boot/grub/themes/starfield/terminal_box_sw.png’: No space left on device
cp: error writing ‘/boot/grub/themes/starfield/terminal_box_w.png’: No space left on device
cp: failed to extend ‘/boot/grub/themes/starfield/terminal_box_w.png’: No space left on device
cp: error writing ‘/boot/grub/themes/starfield/theme.txt’: No space left on device
cp: failed to extend ‘/boot/grub/themes/starfield/theme.txt’: No space left on device
+ test -f /usr/share/grub/unicode.pf2
+ mkdir -p /boot/grub/fonts
mkdir: cannot create directory ‘/boot/grub/fonts’: File exists
+ cp /usr/share/grub/unicode.pf2 /boot/grub/fonts
cp: error writing ‘/boot/grub/fonts’: No space left on device
cp: failed to extend ‘/boot/grub/fonts’: No space left on device
+ is_path_readable_by_grub /boot/grub
+ path=/boot/grub
+ test -e /boot/grub
+ :
+ /usr/bin/grub-probe -t fs /boot/grub
+ :
++ /usr/bin/grub-probe -t abstraction /boot/grub
+ abstractions=
+ :
+ '[' x = xy ']'
+ return 0
++ /usr/bin/grub-probe --device-map= --target=device /boot/grub
+ grub_device=/dev/sda2
+ test -f /boot/grub/grubenv
++ echo /dev/sda2
++ xargs /usr/bin/grub-probe --device-map= --target=fs --device
+ fs_module=ext2
+ test xext2 = x
+ partmap_module=
++ echo /dev/sda2
++ xargs /usr/bin/grub-probe --device-map= --target=partmap --device
+ for x in '`echo "${grub_device}" | xargs "$grub_probe" --device-map="${device_map}" --target=partmap --device 2> /dev/null`'
+ case "$x" in
+ partmap_module=' part_gpt'
++ echo /dev/sda2
++ xargs /usr/bin/grub-probe --device-map= --target=abstraction --device
+ devabstraction_module=
+ '[' xbiosdisk = xata ']'
+ '[' xbiosdisk = xnative ']'
+ modules=' biosdisk'
+ modules=' biosdisk ext2 part_gpt '
++ /usr/bin/grub-mkrelpath /boot/grub
+ relative_grubdir=/grub
+ '[' x/grub = x ']'
+ prefix_drive=
+ config_opt_file=
+ rm -f /boot/grub/i386-pc/load.cfg
+ '[' x '!=' x ']'
+ '[' x = x ']'
+ '[' x/dev/sda '!=' x ']'
+ grep -qx '(.*)'
+ echo /dev/sda
++ /usr/bin/grub-probe --device-map= --target=drive --device /dev/sda
+ install_drive='(hostdisk//dev/sda)'
++ echo '(hostdisk//dev/sda)'
++ sed -e 's/^(\(\([^,\\]\|\\\\\|\\,\)*\)\(\(,[a-zA-Z0-9]*\)*\))$/\1/'
+ install_drive=hostdisk//dev/sda
++ echo /dev/sda2
++ xargs /usr/bin/grub-probe --device-map= --target=drive --device
+ grub_drive='(hostdisk//dev/sda,gpt2)'
++ echo '(hostdisk//dev/sda,gpt2)'
++ sed -e 's/^(\(\([^,\\]\|\\\\\|\\,\)*\)\(\(,[a-zA-Z0-9]*\)*\))$/\3/'
+ grub_partition=,gpt2
++ echo '(hostdisk//dev/sda,gpt2)'
++ sed -e 's/^(\(\([^,\\]\|\\\\\|\\,\)*\)\(\(,[a-zA-Z0-9]*\)*\))$/\1/'
+ grub_drive=hostdisk//dev/sda
+ '[' x/dev/sda = x ']'
+ '[' xbiosdisk '!=' x ']'
+ '[' xbiosdisk '!=' xbiosdisk ']'
+ '[' xhostdisk//dev/sda '!=' xhostdisk//dev/sda ']'
+ '[' xpc '!=' xefi ']'
+ '[' xpc '!=' xpc ']'
+ '[' x,gpt2 = x ']'
+ prefix_drive='(,gpt2)'
+ case "${grub_modinfo_target_cpu}-${grub_modinfo_platform}" in
+ mkimage_target=i386-pc
+ case "${grub_modinfo_target_cpu}-${grub_modinfo_platform}" in
+ imgext=img
+ '[' x = x ']'
+ /usr/bin/grub-mkimage -d /usr/lib/grub/i386-pc -O i386-pc --output=/boot/grub/i386-pc/core.img '--prefix=(,gpt2)/grub' biosdisk ext2 part_gpt
/usr/bin/grub-mkimage: error: cannot write to `/usr/lib/grub/i386-pc/biosdisk.mod': No space left on device.
+ exit 1
My boot partion is suddenly full when there was no problem previously.
/dev/sda2          29745     29745         0 100% /boot
Am I correct to assume that if I reboot GRUB will no longer function?

Similar Messages

  • [Solved] Trying to upgrade to kde 4.5 and receiving conflicts

    I run pacman -Syu and get the following:
    > pacman -Syu
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    Targets (30): kdeaccessibility-colorschemes-4.5.0-1 kdeaccessibility-iconthemes-4.5.0-1 kdeaccessibility-kmag-4.5.0-1
    kdeaccessibility-kmousetool-4.5.0-1 kdeaccessibility-kmouth-4.5.0-1 kdeadmin-kcron-4.5.0-1
    kdeadmin-ksystemlog-4.5.0-1 kdeadmin-kuser-4.5.0-1 kdeadmin-system-config-printer-kde-4.5.0-1
    kdeartwork-colorschemes-4.5.0-1 kdeartwork-desktopthemes-4.5.0-1 kdeartwork-emoticons-4.5.0-1
    kdeartwork-iconthemes-4.5.0-1 kdeartwork-kscreensaver-4.5.0-1 kdeartwork-sounds-4.5.0-1
    kdeartwork-styles-4.5.0-1 kdeartwork-wallpapers-4.5.0-1 kdeartwork-weatherwallpapers-4.5.0-1
    kdebase-lib-4.5.0-1 kdebase-dolphin-4.5.0-1 kdebase-kdepasswd-4.5.0-1 kdebase-kdialog-4.5.0-1
    kdebase-kfind-4.5.0-1 kdebase-konqueror-4.5.0-1 kdebase-kwrite-4.5.0-1 kdebase-plasma-4.5.0-1
    libtorrent-rasterbar-0.15.2-1 xorg-server-utils-7.5-6 xorg-utils-7.6-3 xscreensaver-5.11-2
    Total Download Size: 0.00 MB
    Total Installed Size: 180.86 MB
    Proceed with installation? [Y/n] y
    checking package integrity...
    (30/30) checking for file conflicts [------------------------------------------] 100%
    error: failed to commit transaction (conflicting files)
    kdeartwork-wallpapers: /usr/share/wallpapers/Code_Poets_Dream/contents/images/1280x1024.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Code_Poets_Dream/contents/images/1600x1200.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Code_Poets_Dream/contents/images/1920x1200.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Code_Poets_Dream/contents/screenshot.png exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Code_Poets_Dream/metadata.desktop exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Curls_on_Green/contents/images/1280x1024.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Curls_on_Green/contents/images/1600x1200.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Curls_on_Green/contents/images/1920x1200.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Curls_on_Green/contents/screenshot.png exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Curls_on_Green/metadata.desktop exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Spring_Sunray/contents/images/1280x1024.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Spring_Sunray/contents/images/1600x1200.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Spring_Sunray/contents/images/1920x1080.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Spring_Sunray/contents/images/1920x1200.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Spring_Sunray/contents/screnshot.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/Spring_Sunray/metadata.desktop exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/contents/images/1280x1024.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/contents/images/1280x800.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/contents/images/1440x900.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/contents/images/1600x1200.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/contents/images/1920x1080.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/contents/images/1920x1200.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/contents/screenshot.jpg exists in filesystem
    kdeartwork-wallpapers: /usr/share/wallpapers/The_Rings_of_Saturn/metadata.desktop exists in filesystem
    Errors occurred, no packages were upgraded.
    cannot find any reference material searching so anyone have any ideas?
    thanks
    Last edited by splippity (2010-08-25 02:14:00)

    Stop bumping. Use the edit button.
    Not sure why it jokes on this, as the files should not be part of kdeartwork-wallpapers:
    http://www.archlinux.org/packages/extra … allpapers/
    Maybe your mirror has not synched completely yet? You could check manually if it already has the new kdebase-workspace.
    Apart from all that, you could just hold back kdeartwork-wallpapers for now and update the rest.
    Last edited by hokasch (2010-08-24 22:30:55)

  • [Solved]Conflicting file when trying to upgrade node.js

    Hey there,
    I'm updating my packages and a file conflict arrives when trying to upgrade node. I was hoping someone would know how to deal with this.
    error: failed to commit transaction (conflicting files)
    nodejs: /usr/lib/node_modules/npm/node_modules/read-package-json/node_modules/normalize-package-data/lib/core_module_names.json exists in filesystem
    Errors occurred, no packages were upgraded.
    Thanks for any help!
    Last edited by Aquila (2013-12-23 17:47:23)

    https://bbs.archlinux.org/viewtopic.php?id=130138

  • I tried to upgrade my software 6 using icloud but iphone 3gs it freezes it how can i solve it

    i tried to upgrade my iphone 3gs but it freezes the whole phone please help asap..

    If you are near an Apple store, you can take the cable, charger and iPad in for testing.
    Or like Anti says, try a different cable.
    I'm not familiar with Cheeseball cable, though. I've used Apple and Griffin with good results.

  • I tried to upgrade from FF7 beta to FF7 and now I have no Firefox at all

    I was using the FF7 beta. When I saw that FF7 had been released, I downloaded and tried to install it, without uninstalling the beta first. That may have been a mistake. It got partway through the install process and then asked me to reboot the computer. After the reboot, my FF shortcut no longer worked ("Searching for firefox.exe"). I used another browser to download the installer again and ran it, only to be told that I needed to reboot my computer in order for a previous install to complete. I rebooted; no change. Attempting to remove the existing installation in Add/Remove Programs has not helped, though Mozilla Firefox is no longer listed there.
    I'm using Windows XP and my standard user account doesn't have admin privileges. This hasn't been a problem for Firefox until, perhaps, now. I've tried running the installer from an admin account as well, with the same result.
    Is there anything I can remove manually to fix this?

    OK... I found a Mozilla Support article - https://support.mozilla.com/en-US/kb/The%20program%20must%20close%20to%20allow%20a%20previous%20installation%20attempt%20to%20complete - which says deleting xpicleanup.dat will solve the problem; but I guess that's out of date (or the presence of that file isn't the only cause of the bug), because there's no xpicleanup.* on my machine. However, elsewhere in this forum - https://support.mozilla.com/en-US/questions/786890 - I found a suggestion to install the new version somewhere other than the default folder. I did that, and it worked; and it even preserved my bookmarks, add-ons and previously-opened tabs. (If anyone finds this while trying to solve their own upgrade/install failure: choose Custom rather than Standard install, and just change the suggested folder name.)
    The only remaining sign of the problem is the icon in my Quick Launch area: if I try to use it to launch Firefox, I still get the error "Windows cannot open this file: firefox.exe.moz.delete". Having recorded that here for posterity, I'll be replacing the icon.

  • TS3694 itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?

    itunes error (-42404) -- Okay, getting a little frustrated (but then again, who isn't a little frustrated?). I recently tried to upgrade iTunes software a few days ago but it failed. What is (-42404) error code mean?
    I get the following:
      (1) iTunes - The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? Yes/No
      (2) iTunes - The software required for communicating with iPods and mobile phones could not be repaired. Please reinstall iTunes if you wish to use these devices. OK
      (3) iTunes error message - A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) OK
      (4) iTunes error message - We could not complete your iTunes Store request. A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404) There is an error in the iTunes Store. Please try again later. OK
    Okay, so I decided to uninstall and reinstall. Funny, iTunes can be found in a program folder, but it does not show up in the programs list. I tried to look for it using the command prompt ("wmic" --> "product get name") but iTunes is not there either. Doesn't even show up in the registry to try to uninstall.
    I just want to "properly" uninstall and reinstall iTunes (plus the other usual suspects, Apple Software Update, Apple Mobile Device Support, Bonjour, & Apple Application Support). If anyone out there has any suggestions, please help! (I'm running Windows Vista -- don't judge/laugh) :-)

    Okay, feeling like an idiot, but will share so others don't have to. I rebooted my computer and that enabled iTunes to reappear in the programs list. Don't appear to be having the same problems as before (no error messages now). Problem solved!

  • I am trying to Upgrade my iMac running 10.6 to the latest OSX Combo upgrade... however on restart my iMAC 'panics' - crashes?... i have seen some discussion on this but no resolution so far that works for me... any ideas?

    Hi all,
    This is proving somewhat frustrating. End goal is to upgrade the iMAC to Lion. However, in order to use the downloaded version of Lion Install package, i have first to upgrade my iMAC from OSX 10.6 (i.e. I need at least 10,7 to get access to the APP store).
    However, whenever I have tried to upgrade, then on restart the machine 'panics'.
    At first I thought it was some form of malware and erased and repartioned the disk and then re-installed. However, this did not solve the problem.
    Is there a problem with post 10.6 upgrades ?
    best regards and thanks to anyone who might offer suggetsions to help.
    Buck.

    Hi Paul,
    I am using Snow Leopard 10.6 (re-installing as we speak). on an iMac.
    Have verified startup disk as well as verified permissions.
    Have cleared the PRAM (using option-command-P-R keys and waiting for the chimes).
    Only peripherals are an apple usb keyboard and an apple usb mouse connected via keyboard usb adapter.
    Machine runs fine at 10.6
    problem only occurs when i try to reboot after installing the Combo upgrade.
    p.s. i also have a MACBook Pro and have had no similar issues with that. So am guessing it is somethign related specifically to iMac hardware/firmware ?
    ciao, Buck.

  • I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, it is throwing error "The product distribution file could not be verified. It may be damaged or not signed".

    I am using Mac OS X 10.7.5 as of now and when I am trying to upgrade to Mavericks, the App Store is throwing error "The product distribution file could not be verified. It may be damaged or not signed".
    Is there anything I should do differently? Is anyone else facing the same issue?
    Kindly help.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click anywhere in the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef 
    Step 4
    ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of login items' | open -ef 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • Im trying to upgrade the ram on the hp mini 200-4200sa. however i can't open the case?

    im trying to upgrade the ram on the hp mini 200-4200sa. however i can't open the case?
    This question was solved.
    View Solution.

    09aparker,
    The removal and replacement procedures are here:  http://h10032.www1.hp.com/ctg/Manual/c03163704.pdf
    -wes
    I am an HP employee.

  • When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle, after it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

    When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle.
    After it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"

    Hi bahaluly,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
    Get help with iOS update and restore errors - Apple Support
    Solve network errors
    Related errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or "The device isn't eligible for the requested build." These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device. 
    Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
    Cheers,
    Mario

  • Trying to upgrade to 7.7, unable to install to drive F

    I am trying to upgrade to 7.7 and the download comes in but the install fails saying "unable to install to drive F". How do I change this as my current itunes is on drive c. No drive F is available.

    Hello FlaOne,
    Welcome to the HP Forums.
    I see that you have downgraded the operating system back to Windows 7.
    So I can better assist you, please respond with your printers Model Number:
    How Do I Find My Model Number?
    Once I have the printer model number, I can then research the issue and attempt to find suitable troubleshooting steps.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Hello, I was trying to upgrade my iTunes for windows 7 PC, but because of invalid signature error I removed iTunes as well as all apple related applications. While reinstalling it , When I click link to install iTunes it immediately says '' thank you

    Hello, I was trying to upgrade my iTunes for windows 7 PC, but because of invalid signature error I removed iTunes as well as all apple related applications. While reinstalling it , When I click link to install iTunes it immediately says '' thank you for downloading iTunes'' but I don't find it in my system.
    I have tried all suggested option to solve it but all in vain. Please help me to get rid of this problem

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • Error when downloading OS Yosimite.Have spent four days trying to upgrade to Yosimite.

    Have been trying to upgrade to OS Yosimite for the last four days.Keep getting "error in downloading" every hour or so.I have managed to download 1.75 GB of the 5 GB,at this rate it will take me a long time to install this new improved OS. Any suggestions?

    Nevermind, I solved it! I had to download carrier specific software from the Blackberry website first (link below), and THEN go to the Device Manager and finish the process there!
    https://www.blackberry.com/Downloads/entry.do?code=7D2A383E54274888B4B73B97E1AAA491
    Jeez, so complicated! But so relieved to finally have OS 6!

  • Trying to upgrade RAM from 8GB to 16GB

    I purchased a brand new HP:
    »HP Pavilion 17-f022ds Notebook PC (ENERGY STAR)
    It has 8GB RAM and im trying to upgrade to 16. Its a 64bit operating system so I know it can be and you can also purchase this laptop with 16GB of RAM. My issue is that there is no RAM cover on the bottom of the laptop like normal HP's ive owned before. Whats up with this? Im a soldier and about to deploy again and im just trying to have a faster laptop and no one has been able to help me. I would have bought the 16GB Ram laptop if I saw it at the time I bought mine. 

    Based on the HP Pavilion 17 Notebook PC HP Pavilion 15 Notebook PC - Maintenance and Service Guide for your computer, there may only be one SODIMM slot and it may only support up to 8GB of RAM. It is also possible that the SODIMM slot(s) are not user accessible.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • I have LavVIEW 8.6 full version installed. I tried to upgrade to 8.6 professional version by just installing the new disks, and it didn't upgrade. Do I have to un-install, or is there a trick ?

    I have LavVIEW 8.6 full version installed.  I tried to upgrade to 8.6 professional version by just installing the new disks, and it didn't perform the upgrade.  Do I have to un-install first and re-install, or is there a trick ?
    Solved!
    Go to Solution.

    Look into the License Manager in the National Instruments folder of your Start menu.  It is probably just a matter of activating LabVIEW 8.6 and possibly some other features with your new license code instead of your previous full version license code.

Maybe you are looking for

  • How do I get a refund for my previous iCloud storage purchase?

    First I bought 10 mb for $15 then I bought 20 mb for $40. Now I have a total of 20 mb total only but I was not re-imbursed for the first purchase. How do I get money back??

  • ODI Number of Running Sessions

    Hello guys !! A cuestion, I'm doing a package with a parallel process, but this only raises 3 maximum sessions at the same time, when I hope it raises 9 how can I increase the Number of running sessions / Maximum number of sessions for the agent? Als

  • Using time capsule with pppoe

    Hello, I can easly connect to internet with my modem 'airties 6372' But i want to use my TC to connect to internet. My internet provides me pppoe. What should i do to do it? Here are my settings i am sorry some are not in english. I can translate if

  • HTTP Receiver: parameter in URL

    Hi, in my HTTP receiver adapter I'd like to use the following: www.xyz.com/script.asp?xmlcontent=payload So my target host = www.xyz.com my Path = script.asp How do I put the xmlcontent=payload in ? I read some things about prolog and epilog. Should

  • Multiple selection screens for report

    I need to display 2 separate selection screens prior to executing the report. 1. A selection screen to enter the material & plant 2. Based on the material and plan another selection screen to display the inspection characteristics associated with the