[Solved] wicd-curses and -client: access denied???

>> Reboot fixed it, problem resolved.
==================================
after last wicd upgrade, getting these errors trying to start the respective wicd clients:
09:39 PM:~ $ wicd-curses
ERROR:dbus.proxies:Introspect error on :1.7:/org/wicd/daemon: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.136" (uid=1000 pid=24457 comm="python) interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.7" (uid=0 pid=2945 comm="python))
ERROR: wicd-curses was denied access to the wicd daemon: please check that your user is in the "users" group.
09:39 PM:~ $ wicd-client
Importing pynotify failed, notifications disabled.
Has notifications support False
Loading...
Connecting to daemon...
Connected.
ERROR:dbus.proxies:Introspect error on :1.7:/org/wicd/daemon: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.137" (uid=1000 pid=24467 comm="python) interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.7" (uid=0 pid=2945 comm="python))
ERROR:dbus.proxies:Introspect error on :1.7:/org/wicd/daemon/wireless: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.137" (uid=1000 pid=24467 comm="python) interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.7" (uid=0 pid=2945 comm="python))
ERROR:dbus.proxies:Introspect error on :1.7:/org/wicd/daemon/wired: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.137" (uid=1000 pid=24467 comm="python) interface="org.freedesktop.DBus.Introspectable" member="Introspect" error name="(unset)" requested_reply=0 destination=":1.7" (uid=0 pid=2945 comm="python))
warning: ignoring exception org.freedesktop.DBus.Error.AccessDenied: Rejected send message, 1 matched rules; type="method_call", sender=":1.137" (uid=1000 pid=24467 comm="python) interface="org.wicd.daemon" member="GetConnectionStatus" error name="(unset)" requested_reply=0 destination=":1.7" (uid=0 pid=2945 comm="python))
my user is in the user group. wicd seems to be working fine, I just can't manage my connections. Any ideas?
Last edited by userlander (2009-09-18 22:38:06)

I did not, but I installed it and wicd-curses is now working. Thank you!
dbus-glib was not listed as a dependency for wicd. I will file a bug report.

Similar Messages

HTTP errors and/or access denied messages preventing me from downloading CS5.5

How can I download my copy of CS5.5 Design Standard? I keep getting HTTP errors and/or access denied messages.

Alex5555 where are you downloading the installation files from? Have you tried utilizing a different web browser? Is your web browser configured to accept cookies?

Mailbox and Client Access on the same servers for CAS HA (L4 LB) and Mailbox DAG

Hi, I would like to ask this question.
I'm reading all sort of documentation that I'm finding on the internet, but I can't understand if what I'm thinking to do is possible.
I would like to setup a basic environment configuring only two Exchange 2013 on two Win 2012 R2 servers. Both servers will be Mailbox (MBX) and Client Access (CAS). I will create a two-member DAG using File Share Witness or Disk Witness for the Dynamic Quorum.
Then I will setup Outlook Anywhere with internal and external namespace for CAS redundancy and layer 4 load balancing.
In this scenario I will not need to install a third part load balancer.
Am I doing right or I watching a movie?
Thanks in advance

Hi ,
You could need to have the HLB or virtual load balancers for redundancy.
Disadvantages of some load balancing methods :
If you use Windows NLB then it can provide redundancy on server level failure and not on application level.
In case if we use the windows round robin method for load balancing then it wouldn't provide server level and application level redundancy during the failures.At the Same time we need to manually adjust the DNS records during the server failure but on the
client end dns caches will create the issues.
Lets consider you are having the internal and external names for outlook anywhere like below .
internal and external outlook anywhere name :
mail.domain.com
For the above name just configure the HOST A record in windows DNS and map it to load balancer ip.Then the second step would be to configure your exchange servers in LB .So all the internal and external outlook client connectivity will happen via LB to exchange
servers.In that case if anyone of the server is down then LB will automatically make the outlook client to get connected to the server which is alive and at the same time none of the request from outlook client to LB will get forward to the server which is
in down state.
Note : Make sure you are having the redundancy for LB devices also otherwise it would be a single point of failure on the LB end .
Please reply me if anything is unclear.
Thanks & Regards S.Nithyanandham

Financial Reporting 11.1.1.3 Client "Access Denied" connecting to HFM

Hi,
I have installed Financial Reporting 11.1.1.3 Client on a PC running Windows Vista 32 bit SP1. When I try to access to a report created form another PC that connects to HFM, it says "Error connectiong to server" and "Cannot connect to database "X": Access Denied". The native user is the same that created the report; on the same machine, I can succesfully access HFM applications from HFM client and Rule editor.
Any idea?
Thanks

Dear John,
How to install latest Version of Hyperion HFM
1) I had downloaded Hyperion Enterprise Performance Management System Foundation Services, Product specific Essabase and Financial Management , and unzip into common folder . but stll iam not able to see Installtool.cmd
which part i have still dowloaded.
Regards
Amit

Why signed and get "access denied (java.io.FilePermission hello.txt read)"?

I am learning the Java tools and policy to create some local browser application for personal use. So I signed a jar file with jarsigner, keytool and policytool and still trying to figure out why my browser application cannot read a simple local text file.
My question are
1. Why use java policy tool (policytool.exe)? If I signed a .jar with keytool and jarsigner, do I really need java policytool to write a policy?
2. What is the maximum validity days? 365? or more? Do I need to sign again when validity expire?
3. I don't want any of my local browser application gets to internet but only work with local files (read, write, or execute). how do I do that?
4. how to use java security policy to grant access to the jar applet? where do I place and import the policy file so the hosting web browser and the applet can work?
My java applet is a simple class that read a text line from a local file in the same folder, and pass the result to a calling web browser Javascript.
Currently the result in the web page is the error message below, even though the jar is signed correctly.
access denied (java.io.FilePermission hello.txt read)
Someone please help and enlight the newbie!

leoku wrote:
I am learning the Java tools and policy to create some local browser application for personal use.Why would you wrap a mostly useless and unhelpful browser window around a Java app. for 'local' use?
.. So I signed a jar file with jarsigner, keytool and policytool and still trying to figure out why my browser application cannot read a simple local text file.
My question are
1. Why use java policy tool (policytool.exe)? If I signed a .jar with keytool and jarsigner, do I really need java policytool to write a policy?No. In fact, don't stuff around with policy files - they are a path to madness.
2. What is the maximum validity days? 365? or more?Keytool accepts an argument for the number of days to remain valid. I do not believe it has an upper limit, but it might be best to experiment with it and find out for yourself. Please report your findings back.
(2a) Do I need to sign again when validity expire?No, but the end user gets a huge warning that the certificate has expired. Further, if it was a certificate that was certified by a CA, the 'always trust' check box which used to default to true, would now default to false.
3. I don't want any of my local browser application gets to internet but only work with local files (read, write, or execute). how do I do that?I am not sure I understand, but if you only offer a JFileChooser for the applet to access resources, that should restrict it to resources off the local file-system. Of course, that would not restrict the end user from downloading something from the internet to their local disks, then accessing it using the applet.
4. how to use java security policy to grant access to the jar applet? where do I place and import the policy file so the hosting web browser and the applet can work?The only place it will work is in the JRE directories of the end-user's machine. Even if you find a way to install your local policy file, do not go messing with the end-user's policy files.
My java applet is a simple class that read a text line from a local file in the same folder,.. In the 'same folder' as what? (1)
..and pass the result to a calling web browser Javascript. That might be the problem. AFAIR, using JS with trusted applets causes the security to be tightened. Perhaps it could be fixed by calling System.setSecurityManager(null) on applet init(), but I have also seen references to using [AccessController.doPrivileged()|http://java.sun.com/j2se/1.4.2/docs/api/java/security/AccessController.html] to wrap the problematic code. I am hazy on the details of how/if that works.
Currently the result in the web page is the error message below, even though the jar is signed correctly.
access denied (java.io.FilePermission hello.txt read)
1) If the answer to my question is what I suspect, there may be better ways to access the resource that are usable even in a sand-boxed app.

Exchange 2010 and Client Access Server Roll

Hi,
We have one CAS/HUB server, two mailbox roll servers in a DAG. Both mailbox roll servers have public folder database and both are replicate each other. Now we are going to office365. Now we
need to install client access roll on public folder database server(mailbox roll server) for office365 users to access the public folder from on premises according to
http://technet.microsoft.com/en-us/library/dn249373(v=exchg.150).aspx
We don't want get any problem after installing another CAS server roll. Our users' outlook should not interrupt with new installation. We are not setup client access array here. We are installing
this for public folders access to office365 mailboxes. How to install and configure?
Please help us to achieve this.
Thanks & Regards.

http://public.wsu.edu/~brians/errors/role.html
Exchange 2013 doesn't have a public folder database. If you're asking about an older version of Exchange, the Exchange previous versions forums are here:
http://social.technet.microsoft.com/Forums/en-US/category/exchangeserverlegacy
You shouldn't have any problem installing the CAS role. To be sure, after installing the server change all the URLs in the virtual directories to point to one of the real CAS servers, and run Set-ClientAccessServer -AutodiscoverServiceInternalUri to
to a valid Autodiscover URL.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Folders and Files access denied from Server 2008 on Windows 7

I upgraded my server from 2003 to 2008. Now my Windows 7 machines can't open files in the Shared Documents on the server. Error comes back with access denied. Can use remote desktop with a Windows 7 machine and have access to the Shared Documents
folder. Any help as to why getting access denied would be great.

Hi,
Plesase check ntfs permisions and share permssions of the shared folder. You could try to set share permissions to Full Control for the Everyone group to see if the issue still exists.
Share and NTFS Permissions on a File Server
http://technet.microsoft.com/en-us/library/cc754178.aspx
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Auditing File and Folder Access Denied Attempts

The company I work for wants to be able to review audit logs to see where people have failed to gain access to particular folders or files on a server, that is part of a DFS. I have enabled Auditing Object Access with Failures, and I have added the Everyone
group to Auditing on the folder, in which it audits all failures. However, when I review the Security Log to see those failed attempts to access a file, for example, I get a log of a success to the user who attempted to open the file, when in actuality, he
failed to open the file because he did not have rights to open it.
What am I doing wrong, or is this how Microsoft has auditing setup?

Yes, myself and a nother technician have been unable to get this to work in a test environment or the real environment. We've created new users with nothing more than Domain User membership, and only list rights to the folder, which is how the real production
folder is setup. We still do not get failure notices when the attempt to access a file they don't have rights to access.
It does however, tell them on the client end that they have been denied access. It just doesn't show in the log.

Question on best practice for NAT/PAT and client access to firewall IP

Imagine that I have this scenario:
Client(IP=192.168.1.1/24)--[CiscoL2 switch]--Router--CiscoL2Switch----F5 Firewall IP=10.10.10.1/24 (only one NIC, there is not outbound and inbound NIC configuration on this F5 firewall)
One of my users is complaining about the following:
When clients receive traffic from the F5 firewall (apparently the firewall is doing PAT not NAT, the client see IP address 10.10.10.1.
Do you see this is a problem? Should I make another IP address range available and do NAT properly so that clients will not see the firewall IP address? I don't see this situation is a problem but please let me know if I am wrong.

Hi,
Static PAT is the same as static NAT, except it lets you specify the protocol (TCP or UDP) and port for the local and global addresses.
This feature lets you identify the same global address across many different static statements, so long as the port is different for each statement (you CANNOT use the same global address for multiple static NAT statements).
For example, if you want to provide a single address for global users to access FTP, HTTP, and SMTP, but these are all actually different servers on the local network, you can specify static PAT statements for each server that uses the same global IP address, but different ports
And for PAT you cannot use the same pair of local and global address in multiple static statements between the same two interfaces.
Regards
Bjornarsb

Client Access denied

Hello
I can successfully connect over the VPN to W2003 R2 as Admin and get the desktop. I configure for another client, make make sure "Dial-In" is to allow access, create an Accounting group, add him to Accounting, add Remote Desktop Users to
that group, create a RRAS policy for Accounting, add both him and Accounting to the Remote Desktop Users group, and STILL I cannot access RDP as that user. It says "log on must be enable from Terminal Services..." Again it works perfectly
for Administrator but never for any other created account. Please advise

Hi,
Thank you for posting in Windows Server Forum.
Please add the user under following path and check.
Computer configuration>Windows Settings>Security Settings>User Rights Assignment
Allow log on through terminal services
Add user under that group and check.
If still facing issue, try adding the user as per below snap.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Server 2012 R2 File Server - 2008 R2/Win7 Clients Access Denied. SMB 3 Encryption.

I've setup a Server 2012 R2 File Server. When creating shares I selected to enable encryption.
Now Windows 7 and 2008 R2 clients cannot access. Pretty clear that this is SMB 3 encryption the cause.
OK. So can I enable these Windows 7 and 2008 R2 clients to access encrypted SMB 3 shares?
I can find no answer or documentation on this.

So can I enable these Windows 7 and 2008 R2 clients to access encrypted SMB 3 shares?
No, you can't. These Windows 7 and 2008 R2 clients talking to Windows Server 2012 R2, they will negotiate to the lowest common protocol which would be SMB 2.1 enabling communication, while not taking advantage of the SMB 3.0 specific capabilities (encryption
included).
There's no built-in encryption inside SMB 2.1

DW CC and MySQL - access denied

I reinstalled the deprecated Server Behaviors and am having a heck of a time connect DWCC to MySQL in PHP.
In frustration, I downloaded Navicat for Windows and, using the same credentials, Navicat connects to the MySQL without issue.
I am running Windows 8.1 and the MySQL is installed on a Synology NAS (DS213).
All of this is local to my LAN.
Any thoughts?
Thanks in advance.
Bob

What those error messages are saying is that PHP can't connect to the database.
This is because it's told to communicate with MySQL via /var/mysql/mysql.sock, but MySQL isn't listening there.
That could be because your MySQL server is configured differently. Check /etc/my.cnf to see where the server is listening. You can read this file with any application that can open text files - no terminal experience necessary (although if you want to use the terminal, it's simply - 'cat /etc/my.cnf' and look for the 'socket' lines)
If I reinstall MySQL, will I lose the data in my database?
That depends, but it is not something you need to do at all, so don't worry about it.
I read somewhere that I need to edit a file called /var/lib/mysql/mysql.sock, but how do I get to this file in order to edit it? I can't find it anywhere? I've been told it's a "hidden" file, but no-one has told me WHERE it's hidden!
Red herring. Ignore whatever you read. In either case it's telling you WHERE you need to look - /var/lib/mysql/ but that isn't relevant here.

There are some files and directories = access denied

Could anyone supply the chmod command to reset all the permissions in my own home directory to what they should be ? I.e. so that I can open them when I am not root!

moljac024 wrote:Using sudo to grant a single user root privileges defeats the purpose of the root account. sudo is not meant to be used in that way.
Root is me anyway: it's just a fast way to tell the program: "Just friggin do it, this is an absolute order, don't make me su -c command enter password enter"
It's just a 3* letters alias for "please don't look while I write my password" su -c command enter password enter.
I, for example have sudo installed and set up and I use it for some commands that I run often, but surely not for everything!
that's insecure anyway
* I rename /usr/bin/sudo to a different name to prevent some stupid applications, like yaourt, from trying to run "sudo program" automatically without notifying me

Access denied when trying to connect client cd rom to vm

Hey guys,
One of my users is using the client to build a vm, tries to connect their cdrom using the client and gets access denied. What is the minimum permissions needed to be able to connect a remote physical cd rom to a vm? VC 2.5, esx 3.0, I believe they currently have virtual machine power user role on the object.
Respectfully,
Matthew
Kaizen!

Hey Guys,
I think there is something else going on here Probably not permissions or roles, maybe a service needs restarting? The user gets the following error:
Exception of type Vmomi.fault.no permission' was thrown
Ideas?
Respectfully,
Matthew
Kaizen!

Im trying to download skype and adobe flash player however i cant download anything because i get this message saying either access denied or some technical error in the gateway/proxy??

My Macbook pro is brand new and im trying to download some applications such as skype and adobe flash player however whenever i try to i cant because either the site im on shifts and says access denied or some technical problem occurs? Very much appreciated.

You might want ot ask in the MBP forum as well as in the SL 10.6 forum.

[Solved] wicd-curses and -client: access denied???

Similar Messages

Maybe you are looking for