[solved[X superlaggy after hd went out of space, but only for one user

So the netbook (eeepc 1101ha) went out of diskspace while running and froze. I freed up some space and restarted X, but it failed so I rebooted. Same story then. It either loads and becomes super slow or doesn't load at all. I use dwm wm which to my knowledge doesn't save to config files that might have been corrupted during the moment with no diskspace. Other wms have same problems too, but only for that user.
Here are some lines from /var/log/Xorg.0.log/
[ 3068.496] (**) Power Button: always reports core events
[ 3068.496] (**) Power Button: Device: "/dev/input/event4"
[ 3068.507] (II) Power Button: Found keys
[ 3068.507] (II) Power Button: Configuring as keyboard
[ 3068.507] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 3068.507] (**) Option "xkb_rules" "evdev"
[ 3068.507] (**) Option "xkb_model" "evdev"
[ 3068.507] (**) Option "xkb_layout" "us"
[ 3068.683] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 3068.683] (II) No input driver/identifier specified (ignoring)
[ 3068.684] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 3068.684] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3068.684] (**) Sleep Button: always reports core events
[ 3068.684] (**) Sleep Button: Device: "/dev/input/event3"
[ 3068.697] (II) Sleep Button: Found keys
[ 3068.697] (II) Sleep Button: Configuring as keyboard
[ 3068.697] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 3068.697] (**) Option "xkb_rules" "evdev"
[ 3068.697] (**) Option "xkb_model" "evdev"
[ 3068.697] (**) Option "xkb_layout" "us"
[ 3068.700] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 3068.700] (II) No input driver/identifier specified (ignoring)
[ 3068.709] (II) config/udev: Adding input device USB2.0 UVC 1.3M WebCam (/dev/input/event7)
[ 3068.709] (**) USB2.0 UVC 1.3M WebCam: Applying InputClass "evdev keyboard catchall"
[ 3068.709] (**) USB2.0 UVC 1.3M WebCam: always reports core events
[ 3068.709] (**) USB2.0 UVC 1.3M WebCam: Device: "/dev/input/event7"
[ 3068.730] (II) USB2.0 UVC 1.3M WebCam: Found keys
[ 3068.730] (II) USB2.0 UVC 1.3M WebCam: Configuring as keyboard
[ 3068.730] (II) XINPUT: Adding extended input device "USB2.0 UVC 1.3M WebCam" (type: KEYBOARD)
[ 3068.730] (**) Option "xkb_rules" "evdev"
[ 3068.730] (**) Option "xkb_model" "evdev"
[ 3068.731] (**) Option "xkb_layout" "us"
[ 3068.742] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event5)
[ 3068.742] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 3068.742] (**) Eee PC WMI hotkeys: always reports core events
[ 3068.742] (**) Eee PC WMI hotkeys: Device: "/dev/input/event5"
[ 3068.750] (II) Eee PC WMI hotkeys: Found keys
[ 3068.750] (II) Eee PC WMI hotkeys: Configuring as keyboard
[ 3068.750] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD)
[ 3068.750] (**) Option "xkb_rules" "evdev"
[ 3068.751] (**) Option "xkb_model" "evdev"
[ 3068.751] (**) Option "xkb_layout" "us"
[ 3068.752] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 3068.753] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 3068.753] (**) AT Translated Set 2 keyboard: always reports core events
[ 3068.753] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 3068.773] (II) AT Translated Set 2 keyboard: Found keys
[ 3068.774] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 3068.774] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 3068.774] (**) Option "xkb_rules" "evdev"
[ 3068.774] (**) Option "xkb_model" "evdev"
[ 3068.774] (**) Option "xkb_layout" "us"
[ 3068.775] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 3068.775] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 3068.775] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3068.775] (II) LoadModule: "synaptics"
[ 3068.776] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 3068.776] (II) Module synaptics: vendor="X.Org Foundation"
[ 3068.776] compiled for 1.8.0.902, module version = 1.2.2
[ 3068.776] Module class: X.Org XInput Driver
[ 3068.776] ABI class: X.Org XInput driver, version 9.0
[ 3068.777] (II) Synaptics touchpad driver version 1.2.2
[ 3068.777] (**) Option "Device" "/dev/input/event6"
[ 3068.823] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 3068.824] (II) SynPS/2 Synaptics TouchPad: buttons: left right
[ 3068.824] (**) Option "TapButton1" "1"
[ 3068.824] (**) Option "TapButton2" "2"
[ 3068.824] (**) Option "TapButton3" "3"
[ 3068.863] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 3068.864] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 3068.880] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 3068.880] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 3068.880] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 3068.881] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 3068.881] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 3068.913] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 3068.914] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 3068.914] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 3068.914] (II) Synaptics touchpad driver version 1.2.2
[ 3069.383] SynPS/2 Synaptics TouchPad no synaptics event device found
[ 3069.384] (**) Option "Device" "/dev/input/mouse0"
[ 3069.397] (**) Option "TapButton1" "1"
[ 3069.397] (**) Option "TapButton2" "2"
[ 3069.397] (**) Option "TapButton3" "3"
[ 3069.417] Query no Synaptics: 6003C8
[ 3069.417] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 3069.418] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 3069.430] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[ 3069.430] (II) UnloadModule: "synaptics"
[ 3069.431] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 3069.431] (II) No input driver/identifier specified (ignoring)
Any ideas?
Last edited by idjut (2010-07-13 00:43:04)

R00KIE wrote:
I'm not familiar with DWM but I would look inside ~/.local ~/.config and ~/.cache , maybe something is stored there.
If that doesn't work you may try moving all the hidden stuff to a backup folder and start the X session again.
Something must be causing that and most probably it's some dot file stashed away inside one of those dot directories (you say new users work just fine so it's not a system problem).
Apart from this I'm out of ideas, once I had XFCE (I know its not the same) act really strange and the problem was related with some corrupted saved session file, once I deleted it everything was fine again.
Didn't work! Any other tips, ideas?

Similar Messages

Huge problems with network accounts. They keep disapear all the time, after restart they are back. But only for 1h or less. Anyone have any suggestions?

I`m using Open Directory, its been working fine for 2 months. But now all of a sudden this very annoying error keeps repeating itself.
It started happen about a week ago,and after a reboot of the server it was working fine, until now. Now the accounts is gone after 1h or so uptime, and after restart all accounts is there, but soon to be disapeared again. Anyone have any suggestion what to look for? And why did it happen in the first place?
For now theres only one user at the office so he uses my admin account (Local user on the server) to connect to shares etc. But in less then a week there will be much more people at the office, so i will need to sort this out ASAP. Appriciate any suggestions/help. thanks in advance.

Open Directory; Password Service Server Log:
(A little shortend, nothing seems wrong there?)
Jul 30 2013 09:51:18 456163us    Mac OS X Password Service version 387.2 (pid = 139) was started at: Tue Jul 30 09:51:18 2013
Jul 30 2013 09:51:18 873014us    RunAppThread Created
Jul 30 2013 09:51:18 873099us    RunAppThread Started
Jul 30 2013 09:51:18 873122us    Initializing Server Globals ...
Jul 30 2013 09:51:19 820305us    Initializing Networking ...
Jul 30 2013 09:51:19 820361us    Initializing TCP ...
Jul 30 2013 09:51:39 735055us    SASL is using realm "server.xxxx.no"
Jul 30 2013 09:51:39 735100us    Starting Central Thread ...
Jul 30 2013 09:51:39 735109us    Starting other server processes ...
Jul 30 2013 09:51:39 735117us    StartCentralThreads: 1 threads to stop
Jul 30 2013 09:51:39 735152us    Initializing TCP ...
Jul 30 2013 09:51:39 735186us    Starting TCP/IP Listener on ethernet interface, port 106
Jul 30 2013 09:51:39 735242us    Starting TCP/IP Listener on ethernet interface, port 3659
Jul 30 2013 09:51:39 735265us    Starting TCP/IP Listener on interface lo0, port 106
Jul 30 2013 09:51:39 735290us    Starting TCP/IP Listener on interface lo0, port 3659
Jul 30 2013 09:51:39 735318us    StartCentralThreads: Created 4 TCP/IP Connection Listeners
Jul 30 2013 09:51:39 735329us    Starting UNIX domain socket listener /var/run/passwordserver
Jul 30 2013 09:51:39 736296us    Finished starting other server processes ...
Jul 30 2013 09:51:39 736313us    -- Password Server successfully started --
Jul 30 2013 09:51:39 736321us    -- Start time: 21 sec, 287 msec --
Jul 30 2013 09:52:19 502436us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxx.no$}.
Jul 30 2013 09:52:19 516404us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxx.no$}.
Jul 30 2013 09:52:19 865774us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxx.no$}.
Jul 30 2013 09:52:19 870922us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxx.no$}.
Jul 30 2013 09:52:19 879988us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxx.no$}.
Jul 30 2013 09:52:19 892772us    GETPOLICY: user {0x1eab69bc916811e28e60a8206623cd3d, server.xxxo.no$}.
Jul 30 2013 09:52:22 897368us    GETPOLICY: user {0xfc35f9dcb0b711e28baca820661e5a32, geir}.
Jul 30 2013 09:52:22 904252us    GETPOLICY: user {0x9ae96942a73011e2aac5a8206623cd3d, christoffer}.
Jul 30 2013 09:52:22 916530us    GETPOLICY: user {0x523107c8ae7911e28baca820661e5a32, anst}.
Jul 30 2013 09:52:22 964934us    GETPOLICY: user {0x5841b68eb09611e28baca820661e5a32, fres}.
Jul 30 2013 09:52:23 12619us    GETPOLICY: user {0x148c7f5c916811e28cd3a8206623cd3d, admin}.

After login I get a blue screen and then back to login window, but only for one account

When one of the users on the iMac tries to login it goes to a blue screen and back to the login window. This only happens with one of the users - I've tried doing a safe boot, running disk utility, and using Time Machine to restore the user's libray back to pre-problem timetable. When I run repair permissions I do gt a SUID file "usr/sbin/vpnd" and "usr/sbin/pppd" have been modified. Any ideas?

Try this...
http://reviews.cnet.com/8301-13727_7-20013630-263.html
If that doesn't help I'd make a new user & use an admin account to move the old folders over & change rights to the new user.

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.

We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
much smaller then than they are now.
The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning.

Ipad 2 - 30gb and running out of space, but i don't have that many movies - can anyone help

ipad 2 - 30gb and running out of space, but i don't have that many movies - can anyone help? How do i find a directory of files that I can manage (PC user)?
thanks!

You might have to do some experimenting from iTunes on your computer.
Several months back, I had a phantom 5G of video. I unchecked ALL video files and synced the iPad and the 5G was still there. I was able to delete the 5G and bring it back by repeatedly unchecking and checking the "Sync Movies" box.
A "Restore" solved my problem. Be forewarned that it's not quick:
Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

Restrict print out of Purchase order only for Production system

Hi,
I want to restrict print out of Purchase order only for Production system, don't want to take it in devep or quality.
is there any identifier to find the system is production or development.
can anyone tell me how to restrict it,
is there any function module, not based on client system.
Thanx in advance
Kesav

Hi Kesavarathinam Vaidyalingam ,
yes, I also use thomas' suggestion using
t000-cccategory = 'P'.
to determine productive client.
Just one small hint: I found this condition as true in a test system: The admin had done a system copy to create a fresh test client - but forgot (or did not see a good reason) to change t000-cccategory = 'P. to t000-cccategory = 'T'.
Regards,
Clemens

Work flow Icon Is Greyed out for One user

Hello SAP Guru's ,
We are facing issue for one user in SAP easy Access .
Workflow Icon,User Menu ,SAP Menu buttons is Greyed out but user able to access transaction SBWP.
Can you please give solution why those buttons are greyed out and few button's are (Enabled attched In scrren shot)?Do I need to maintain any where user settings
Please let me any user specific settings is missing for that user ?
My Analysis - I have checked with user and I tried to change in SAP Easy Access ->Extras->Settings Still not able to achive any .
I gone thorough the link - http://scn.sap.com/thread/1737679
Still not able to resolve this issue.
Thanks In Advance,
Shiv

Hi,
Please check the following authorization objects are assigned to the user or not in SU24.
S_BDS_DS BC-SRV-KPR-BDS: Authorizations for Document Set
S_OC_DOC         SAPoffice: Authorization for an Activity with Documents
S_OC_FOLCR     SAPoffice: Authorization to Create Shared Folders
S_OC_ROLE        SAPoffice: Office User Attribute
S_OC_SEND       Authorization Object for Sending
S_OC_TCD          SAPoffice: Transaction Code Authorizations
S_WFAR_OBJ    ArchiveLink: Authorizations for access to documents
Regards,
Murali Krishna.

My Mac air keeps on loosing wifi and when I want to switch it on! It says wifi hardware not installed. After about 5 minutes the wifi is back on, but only for about 10 minutes before loosing signal again.

My Mac air keeps on loosing wifi and when I want to switch it on it says "wifi hardware not installed" After about 5 minutes the wifi is back on, but only for about 10 minutes before loosing signal again. This is really frustrating.

I am also having the same problem.. Its too much annoying and its unfortunate nobody at apple support has anyclue of what is happening?
... This is happening almost most of the time keeping my phone down most of the times.

I have music in the cloud but only plays one at a time, anyone have any idea how to solve this please?

I have music in the cloud but only plays one at a time, anyone have any idea how to solve this please?

- Transfer iTunes purchases by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other music by using a third-party program like one of those discussed here:
Copy music from Ipod to new computer...: Apple Support Communities
You may have t opurchase one. Some only do a limited number of transfers without paying.
- Make a backup of yur iPod by connecting the iPod to the computer and right clicking on the iPod under devices in iTunes and selecing Backup.
- Restore the iPod from that backup.

My 8GB iPod touch is running out of space, but all I have is 177 songs with no apps, videos, or pictures.

My 8GB iPod touch is running out of space, but all I have is 177 songs with no apps, videos, or pictures.

Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
Come back with the results.
What is the Other on my iPhone and How to Remove It
An "other" larger than abount 1 1/2 GB usually indicates that the "other" includes corrupted files.
First try:
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

HT4527 on my old laptop the harddrive went out..i have a new one how can get all tha info back/music/fotos/app??

old laptop hard drive went out.i have a new one how can i transfer my info to the new one?hard drive not working

If you don't have backups, see here
https://discussions.apple.com/docs/DOC-3141

Problems with wifi after lion upgrade 10.7.2 but only at home

HI, my wifi conection was problemless till I upgraded to lion 10.7.2. After that, it is impossible to connect through airport but only in my home´s wifi. Other computers work at home (including my iphone) and my macbook pro connects everywhere else with no problem but it doesn´t at home. Inmediately after choosing the desired conection it says: Not posible to conect due to conection time run out (or something like that).
Any help?

Then it would appear to be an issue with your router. What router? Model? Is the firmware up to date?

User Defined Fields greyed out for one user

Hi Experts,
One of our users is a Super User but on the Business Partner Master Data screen, the User Defined Fields are greyed out.
This is user specific as the issue is happening for the same user on 2 seperate PCs.
Other users can update these UDFs - any suggestions?
Thanks
Greig

Hi
take a look at this SAP Note :
Cannot access settings for the user defined fields
Symptom
Cannot access settings for the User Defined Field(UDF)
Other terms
UDF, user defined field, sbo-udf, settings for UDF are inactive, the settings for the udf are greyed out.
Reason and Prerequisites
Need to use the Settings option to order the udf.
In Tools -> User Defined fields -> Settings the option 'Settings' is greyed out and inactive.
Solution
If in Tools -> User Defined fields -> settings and this option is not available then return to the document and click anywhere in the main document window.
Now return to Tools -> User Defined fields -> settings and this option will now be active.

TS2518 Aperture 3.4.1 freezing after update - only on one user

Since upgrading to Aperture 3.4.1 Apeture freezes everytime I open it up. The freezing on occurs on my main user. The library works fine in other user accounts and on my other Mac. Aperture also freezes when opening any library (even a new one) on my main user account. I have tried reinstalling (including deleteing Application Support/Aperture and plist files). am downloading through the AppStore. Have also tried repairing permissions through Disk Utility and Reseting ACL's for the user.
Furthermore iPhoto freezes when launched from this user as well which leads me to believe this is a corrupt shared file between the two? any advice before I start systematically ruling out files in the library??
Thanks!

Where are your Aperture/iPhoto Libraries located? On an external drive or your system drive? If external: Is the drive locally connected, or a network volume? How is it formatted?
Check the settings and preferences, that are shared by iPhoto and Aperture:
Your login items: Do you launch any third-party application/utilities on login? Or have preference panes installed to be used with image capture? Do you have any Aperture plugins, that may no longer be compatible?
The image capture preferences are shared between all photo apps: Try to remove them.
The iLifeAssetManagement folder in your library is shared by iPhoto and Aperture.
To remove the image capture preferences:
If Aperture is running, quit Aperture, and log off and on again.
Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/ then hit return.
In the window that opens remove "com.apple.ImageCapture.plist"
and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture something .plist remove them too.
then try again.
If you are using PhotoStream, try to remove the iLifeAssetManagement folder from your User Library: (it is located in the Applications Support folder). This folder is also shared by Aperture and iPhoto in your User account.
~/Library/Application Support/iLifeAssetManagement/
Removing this folder will remove the local copy of your PhotoStreams howver; so make a backup, if you want to save the images.
Please report back with the results, if this does not help.
Regards
Léonie

Isight not working after power went out in house

Something was making my serrate bracket to be thrown in my basement making the power to go out, and after that my isight does not work any more. My macbook pro was plugged into a power strip but i dont think it has a serg protector on it.
I have tried to restart the computer and it also is not showing up in System Profiler. Is there any thing i can do or any way to know 100% its not working?

Resetting the SMU might help:
http://support.apple.com/kb/TS1365

[solved[X superlaggy after hd went out of space, but only for one user

Similar Messages

Maybe you are looking for