[SOLVED] Yaourt issue - query's dependency (yajl) not installing

First off, I'm fairly new to Arch, but with the assistance of the Beginner's Guide I managed to get a running, beautiful, simple system. Now...
I've been trying to install yaourt, but it has a dependency (query) which ALSO has a dependency (yajl). I've tried downloading a tarball of yajl and installing it that way, and I've tried using the PKGBUILD file, but query still says that it isn't installed. I'm really not sure what I'm doing wrong, but any relevant input is welcome. Thanks, guys!
Last edited by InfernalDante (2011-05-27 11:36:45)

Thanks for the speedy response.
I tried using the -s switch with query; yajl installed with no issues, as did query (or so the terminal said), but when I tried the same switch with yaourt, it gave me this:
[dante@monster yaourt]$ makepkg -s
==> Making package: yaourt 0.10.1-2 (Thu May 26 21:29:05 PDT 2011)
==> Checking runtime dependencies...
==> Installing missing dependencies...
error: target not found: package-query>=0.7
==> ERROR: 'pacman' failed to install missing dependencies.
Am I doing something wrong?
EDIT: Missed your edit. I'll try that now and report back when I do.
Ah! I got it working. Thank you very much!
Last edited by InfernalDante (2011-05-27 11:35:44)

Similar Messages

[solved] yaourt messed up pacman - "pacman: command not found"

Hi,
i got some "xxxxxx not found on AUR" messages after doing a "yaourt -Syu --aur" so I began to remove them with "yaourt -Rs xxxxxxx".
When there was only one left "aqpm2" this is what happened:
[studio@myhost ~]$ yaourt -Rs aqpm2
verificando dependências...
Remover (2): aqpm2-20100615-2 qjson-0.7.1-2
Tamanho total dos pacotes a serem removidos: 2,93 MB
Deseja remover estes pacotes? [S/n] s
(1/2) removendo aqpm2 [##########################################################################] 100%
(2/2) removendo qjson [##########################################################################] 100%
/usr/lib/yaourt/basicfunctions.sh: line 10: pacman: comando não encontrado
/usr/lib/yaourt/basicfunctions.sh: line 10: pacman: comando não encontrado
/usr/bin/yaourt: line 201: testdb: comando não encontrado
now pacman is broken:
[studio@myhost ~]$ pacman
bash: pacman: comando não encontrado
[studio@myhost ~]$ yaourt -Syu --aur
/usr/lib/yaourt/basicfunctions.sh: line 10: pacman: comando não encontrado
You are not allowed to launch /usr/bin/pacman with sudo
Please enter root password
Senha:
bash: /usr/bin/pacman: Arquivo ou diretório não encontrado
==> WARNING: problem in pkgbuild.sh library
/usr/lib/yaourt/basicfunctions.sh: line 10: pacman: comando não encontrado
/usr/lib/yaourt/basicfunctions.sh: line 10: pacman: comando não encontrado
/usr/lib/yaourt/basicfunctions.sh: line 10: pacman: comando não encontrado
==> Searching for new version on AUR
/usr/lib/yaourt/basicfunctions.sh: line 10: pacman: comando não encontrado
Unable to open file: /etc/pacman.conf
/usr/lib/yaourt/basicfunctions.sh: line 10: pacman: comando não encontrado
/usr/lib/yaourt/basicfunctions.sh: line 10: pacman: comando não encontrado
/usr/bin/yaourt: line 201: testdb: comando não encontrado
[studio@myhost ~]$ sudo pacman -Syu
sudo: pacman: command not found
please help
Last edited by capoeira (2010-10-16 14:33:39)

capoeira wrote:
can I use pacman-static from this repro?
I'm afraid to break system even more
http://repo.archmobile.org/x86_64/archmobile/
OK, that gave me a segfault, so
I downloaded the package and copied the folders to root.
no pacman works but gaves me this errors afterwards:
pacman-3.4.1-1: description file is missing
pacman-3.4.1-1: dependency file is missing
pacman-3.4.1-1: file list is missing
how do I solve this?
BTW: should I make a bug-report??
EDIT: any package I try to instal I get this error:
erro: não foi possível abrir o arquivo /var/lib/pacman/local/pacman-3.4.1-1/depends: Arquivo ou diretório não encontrado
(it's in portuguese but i think its understandable)
Last edited by capoeira (2010-10-15 22:08:36)

[SOLVED] Unrelated Issue - AUR PKGBUILD updated, but not 'pkg'.tar.gz

Hi all,
I noticed that qbzr had become unmaintained and in fact wouldn't install via the AUR PKGBUILD file as the source download link had become obsolete.
I took ownership of the package, then downloaded, updated, targz'd and submitted the new archive. However, it still doesn't seem to be quite right.
If I download the PKGBUILD , I can now makepkg and then pacman -U without trouble. (v0.18)
However, using yaourt - yaourt gets the version info etc from the PKGBUILD file I think, as it displays the intended version correctly (0.18). However it then downloads qbzr.tzr.gz, within which is the PKGBUILD file of version (0.16).
I feel I must have missed something, but I can't figure out how when I submitted qbzr.tar.gz AUR was able to correctly extract the PKGBUILD file for display but not provide the correct qbzr.tar.gz
Perhaps there is a lag in file propagation that I have been previously unaware of?
Cheers
Last edited by thread (2010-02-08 03:28:35)

thread wrote:However it then downloads qbzr.tzr.gz, within which is the PKGBUILD file of version (0.16).
there's nothing wrong with the tarball, so i'm not sure why you think it's not an issue/bug/problem/etc with yaourt..
$ wget http://aur.archlinux.org/packages/qbzr/qbzr.tar.gz
$ bsdtar xf qbzr.tar.gz
$ grep ^pkgver= qbzr/PKGBUILD
pkgver=0.18
Last edited by tdy (2010-02-05 05:04:08)

[SOLVED] Keyboard issue - fn+key "KeyRelease" event not triggered

Hi Archers :)
First post, sorry if not in the right section.
I have a quite anoying bug. I bought a no name laptop, imported by Textorm, model M116 SU7300, same model as this one (http://www.textorm.com/pc-portable/pc-p … 22%5D.html)
On the keyboard, the '<' and '>' symbols are mapped on "fn+W" and "fn+MAJ+W".
Everything works fine in a TTY console. All others fn-KEY are working well.
The problem is with a Xorg environment : when pressing fn+W or fn+MAJ+W, it seems that the release key is never triggered, acting like if I was pressing the key in continue.
When pressing another key, the crazy '<' input stop, but then, fn+W won't works again... until I trigger a press/release event with 'acpi_fakekey 86'.
Then, same scenario.
I booted a live Archbang, same result (well, I wasn't very surprised), and a live Sabayon... same result.
Using xev, I can see that when pressing/releasing fn+W, the KeyReleased event is never triggered. I can provide a log if needed.
So it seems related to the Xorg driver....
I tryied to use the kbd driver by adding an xorg.conf
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr" # "fr-oss" pour Feisty et +
Option "XkbVariant" "latin9"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "Off"
EndSection
I can confirm that the kbd driver was in use with Xorg log :
[ 900.371] (II) LoadModule: "kbd"
[ 900.371] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 900.371] (II) Module kbd: vendor="X.Org Foundation"
[ 900.371] compiled for 1.14.0, module version = 1.7.0
[ 900.371] Module class: X.Org XInput Driver
[ 900.371] ABI class: X.Org XInput driver, version 19.1
[ 900.780] (II) Using input driver 'kbd' for 'Generic Keyboard'
[ 900.780] (**) Option "CoreKeyboard" "on"
[ 900.780] (**) Generic Keyboard: always reports core events
[ 900.780] (**) Generic Keyboard: always reports core events
[ 900.780] (**) Option "Protocol" "standard"
[ 900.780] (**) Option "XkbRules" "xorg"
[ 900.780] (**) Option "XkbModel" "pc105"
[ 900.780] (**) Option "XkbLayout" "fr"
[ 900.780] (**) Option "XkbVariant" "latin9"
[ 900.780] (II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD, id 6)
... no luck. Same comportement.
I tryed the xorg-input-evdev git version, no luck. (But if I understand, xorg-input-evdev use kbd as underlying driver?)
I also tryed xorg-server-dev 1.14.99.1-1
So for now, I use a ugly hack : I mapped "W-W" and "S-W-W" in my openbox rc.xml to execute "acpi_fakekey 86". Nearly working all the time.
I know this isn't directly related to Arch, but if someone has any pointers... I take any ideas.
Thanks in advance!
PS :
xorg-server 1.14.1-1
xf86-input-evdev 2.8.0-1
Last edited by jc.saaddupuy (2013-05-28 18:28:05)

Wow thanks!
I confirm that this is working.
Thanks to your infos, I investigate the udev stuff.
You will have to know the vendor and product name of your machine :
cat /sys/class/dmi/id/{sys_vendor,product_name}
Thats the strings your udev rule have to match in ENV{DMI_VENDOR} and ATTR{[dmi/id]product_name}.
For me, both was empty, so I use a wildcard :
ENV{DMI_VENDOR}=="*", ATTR{[dmi/id]product_name}=="*"
Then, you'll have to specify which codes needs to trigger a key release (sames as found with keymap -i)
Add a file in /usr/lib/udev/keymaps/force-release/ whith the hex values (one per line)
I named mine 'textorm'
/echo 0x56 > /usr/lib/udev/keymaps/force-release/textorm
And add it in the RUN of your udev rule (not the full file name):
ENV{DMI_VENDOR}=="*", ATTR{[dmi/id]product_name}=="*", RUN+="keyboard-force-release.sh $devpath textorm"
Knowing your serio ( /sys/bus/serio/devices/serio0), you can test the keyboard-force-release.sh script (the serio parameter HAVE TO NOT begin with /sys/)
/usr/lib/udev/keyboard-force-release.sh bus/serio/devices/serio0 textorm
You can then check the /sys/bus/serio/devices/serio0/force_release content.
Works like a charm :)

SOLVED - iPhone Bricked by Update Device Driver Not Installed Error 1602

iPhone 4 / Windows 7 x64 / iTunes 9.2.1.5
My iPhone normally interfaces with iTunes on my PC via USB cable without issues.
iTunes prompts to update the iPhone when a new version of iOS is released. Each time, the update has failed as described here: http://support.apple.com/kb/ts1275.
The update process stops, the "Connect to iTunes" screen is all that displays on the phone, and an utterly informative alert message comes up in iTunes along the lines of "Error 1602 (or 1604), The iPhone could not be restored. An unknown error occurred." Along with this, the iPhone ceases to be recognized as a USB device by Windows 7, with a little notification tray pop-up informing me that "Device Driver Software was not successfully installed". The iPhone no longer shows up as a device in iTunes.
The generic troubleshooting steps listed at http://support.apple.com/kb/ts1275 (changing USB ports, changing USB cables, restarting the computer, uninstalling and reinstalling all Apple software, etc., etc.) were a useless waste of time, but following the links for USB troubleshooting led to this page: http://support.apple.com/kb/TS1538
As instructed there, I located the Apple Mobile Device USB Driver in Device Manager. It appeared listed as "Apple Recovery (iBoot) USB driver" with a yellow exclamation point; thus I attempted to reinstall the Apple Mobile Device driver. First I uninstalled the existing driver, then scanned for hardware changes, then tried to update the driver as described. However, the path where the driver files were supposed to be (C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Driver) did not exist; the Driver folder was missing.
After Googling a little I came across http://discussions.apple.com/thread.jspa?threadID=1949672 and http://discussions.info.apple.com/thread.jspa?messageID=10806341. Following the instructions there, I was able to pull the device drivers (usbaapl64.sys, usbaapl64.cat, usbaapl64.inf and usbaplrc.dll) out of the iTunes installation program (from AppleMobileDeviceSupport64.msi, using WinRAR / Universal Extractor), put them in the previously nonexistent Driver folder and make Windows use the drivers.
Happily, this manual driver reinstall allowed Windows / iTunes to recognize the iPhone and proceed with the update / restore process. I had to repeat the driver reinstall process a couple of times during the iPhone restore - as it progressed, it kept switching the driver back to something nonfunctional - but the restore eventually went through, allowing me to keep my apps, data, history, etc. At least, until the next iOS update.

Hi liam3w,
Please try to reset BIOS, if problem remains, please kindly contact local lenovo for hardware inspection.
Please enter BIOS be pressing F1 in "ThinkPad Screen", F9, then F10.
Fred
T61 + X201i

Air installer issue on IE8 when runtime not installed

The standard badge is great, but on IE8, if it detects no runtine, a Flash error box 'A download error has occured. Try to download again?' comes up. If I click the (?) help icon, it first ******* about an invalid certificate. Once adding the security exception through IE8's wonderful security crap, I'm finally redirected to www.adobe.com/products/air. Unfortunately, my Mom (all our type of customers!) is not a developer which that page is for. It should be redirected to http://adobe.com/go/getair/ instead. As for the invalid cert - someone needs to fix that. please. thanks.
Greg

Our application uses a licensing service to prevent illegal copies being run. The licensing service is realized through an executable which pings a server in order to activate the serial code entered by the user. In the AS3 code, we use Adobe AIR 2.6's NativeProcess support to call NativeProcess.start(), trigging that executable to perform said ping. The executable is included in the AIR file, which is converted into a Native Installer (DMG) via the adt command provided by the Adobe AIR SDK for Mac.
While I'm not able to provide you with a build at this time, I'm confident that if you simply attempt to launch an executable from a Mac via an Adobe AIR Application, you will easily reproduce this issue. Just to be sure, here are my specifics again:
Original AIR File:
Windows XP
Adobe Flash CS5.5
Adobe AIR 2.6
Generate the AIR file
Native Installer:
Mac Snow Leopard 10.6.3
Adobe AIR SDK for Mac
Use the AIR file to generate the DMG file

Hp scan not installed (HP Laserjet Pro 200 Color MFP)

Hi all,
My "HP Scan" desktop icon stopped working.
HP "Pring & Scan Doctor" could find the software on my laptop.
As the next step I uninstalled the software (Scanner software).
At HP Smart Install I reinstalled the printer.
Owever, the installation didn't install the scanner applicaktion.
How should I proceed to get the scanning app back?
The printer is working fine when it comes to printing.
I use a wireless connection to my printer.
Grateful for any good tips!
This question was solved.
View Solution.

Hi @TobySweden ,
I see that you are having issues with the scanning application not installing over the wireless network. I would like to help you resolve this issue, but I will need some more information to provide the proper steps.
What is the full name and product number of your printer? How Do I Find My Model Number or Product Number?
There are a few Laserjet 200 series models.
In the mean time, I would uninstall the printer software, download the latest drivers and software for Windows 8.1 and install it this way without the Smart Install.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Build and emulate not installing into emulator Android API 14

I have test PhoneGap mobile app, which was working 100% and still is, the only issue is that it will not install into emulator.
This appears to be only since Android API 14 and the imporvements to the build. I have exhausted all possibilities i could think of within my skill set without luck.
Any help or ideas would be greatly appreciated
relavent portion of buildlog below:
buildfile: C:\Users\Craig\Desktop\COMFUS~1.FLO\build.xml
install:
     [echo] Install file not specified.
     [echo]
     [echo] 'ant install' now requires the build target to be specified as well.
     [echo]
     [echo]
     [echo]     ant debug install
     [echo]     ant release install
     [echo]     ant instrument install
     [echo] This will build the given package and install it.
     [echo]
     [echo] Alternatively, you can use
     [echo]     ant installd
     [echo]     ant installr
     [echo]     ant installi
     [echo]     ant installt
     [echo] to only install an existing package (this will not rebuild the package.)
BUILD FAILED
C:\Data\android-sdk\tools\ant\build.xml:1098: The following error occurred while executing this line:
C:\Data\android-sdk\tools\ant\build.xml:1141: No message
Total time: 0 seconds
Running app in Android emulator
<DW>
set ANT_HOME=C:\PROGRA~2\Adobe\ADOBED~2.5\CONFIG~1\NATIVE~1\APACHE~1
set ANDROID_HOME=C:\Data\android-sdk
set JAVA_HOME=C:\PROGRA~2\Adobe\ADOBED~2.5\JDK
set PATH=%JAVA_HOME%\bin;%PATH%
cd C:\Data\ANDROI~2\PLATFO~2
C:\Windows\SysWOW64\cmd.exe /u /c C:\PROGRA~2\Adobe\ADOBED~2.5\CONFIG~1\NATIVE~1\DWPHON~1\android\scripts\ANDROI~2.BAT com.fusion.flowbox_cell C:\Data\android-sdk
</DW>
Starting: Intent { act=android.intent.action.MAIN cmp=com.fusion.flowbox_cell/.DefaultActivity }
Error type 3
Error: Activity class {com.fusion.flowbox_cell/com.fusion.flowbox_cell.DefaultActivity} does not exist.

I found a solution and posted it in http://forums.adobe.com/thread/918202?tstart=0

How to solve this issue in query definition

Hi Experts,
I need to solve an issue existed in a query.
This query is built on a infocube which main char and key figures as follow:
sales doc., item, material, fiscal year/period, ordered qty, billed qty.
The query has to show opened qty for specific sales doc / item level. the formula for opened qty = ordered qty - billed qty. But some of the sales doc /item are partial delivered i.e. there are several deliveries' entries for same sales doc/itm. for example the entries as follow:
sales doc---- item--materailfiscal year/periodordered qty-- billed qty
20001------ -- 30--- m1 2009/002 200--
25
20001-- 30 -m1 2009/002 - 200--
100
Then after the execution of the query we got the opened qty: (200 - 25) + (200 - 100) = 175. This is totally wrong because the correct opened qty should be 200 - 25 - 100 = 75.
Could any body provide a solution to get the correct result ?
Thanks a lot
Edited by: Leon Ouyang on Dec 15, 2008 4:12 PM
Edited by: Leon Ouyang on Dec 15, 2008 4:13 PM
Edited by: Leon Ouyang on Dec 15, 2008 4:43 PM

Hi Leon,
Somewhere in your infocube there must be an indicator whether it is the first delivery or not.
Change ordered quantity into a resctricted keyfigure using the restriction of the indicator first delivery.
Your overview will be:
sales doc---- item--materailfiscal year/periodordered qty-- billed qty
20001------ -- 30--- m1 2009/002 200--
25
20001-- 30 -m1 2009/002--
100
And your total will be correct.
Success,
Udo.

[Solved] Yaourt not searching AUR

My recent upgrade seems to have broken Yaourt. It does not search for packages in AUR anymore. I have tried searching the forum, but cannot figure out what's wrong. This is what my /etc/yaourtrc looks like:
# a
# a
# ~/yaourtrc - Configuration for yaourt
# See yaourt(8) for more information
# AlwaysUpgradeDevel no
# AlwaysUpgradeAur no
# AlwaysForce no
AurVoteSupport yes
# ColorMod Normal
# ColorMod LightBackGround
# ColorMod NoColor
# ColorMod TextOnly
# DontNeedToPressEnter yes
# EditPkgbuild yes
# ExportToLocalRepository /where/you/want
# LastCommentsNumber 5
# LastCommentsOrder asc
# NoConfirm no
# PacmanBin /usr/bin/pacman-color
PkgbuildEditor gvim
SearchInAurUnsupported yes
ShowAurComment yes
# TmpDirectory /where/you/want
# UpdateTerminalTitle yes
# Define here your prefered Sourceforge mirror: (none surfnet ufpr heanet easynews umn switch belnet kent mesh optusnet jaist puzzle superb-east nchc superb-west)
# SourceforgeMirror heanet
Any ideas?
Last edited by paramthegreat (2009-05-16 21:46:08)

ok, so i seem to have solved the issue. i found a changelog for yaourt 0.9.2 that mentioned "fixing aur search". that prompted me to check the yaourt version on my machine and it was still at 0.9.0
upgrading to the latest version seems to have fixed the problem.

[Solved] Ipython Notebook Setup - zmq Dependency Issue

I'm posting both the problem and the solution here in case this helps anyone else who is working with IPython
I just ran into an issue trying to run the ipython notebook on a fresh install of Arch Linux. After installation Ipython works correctly from a shell/terminal prompt, but fails to start when you try to run it in notebook mode (via the' $ ipython notebook --pylab' command ).
This fails with an error that the incorrect version of pyzmq is installed - it's looking for version 2.1.4 (which apparently is not installed with the IPython install. FWIW I reinstalled ipython just to verify that I was not imagining things<g>)!. You can see some more info on this link:
http://ipython.org/ipython-doc/dev/inst … python-zmq
To reinstall/upgrade to the correct version use the following command:
$ sudo pip2 install ipython[zmq]
Notes: 1) This is the appropriate syntax to install subcomponents within a package (did not know this before as I normally install the entire pkg))
2) I use pip2 here as I have both py2.7 and 3.3 installed and I'm trying to develop with py 3.3.
3) AFAIK pip install is recommended over pacman for python components.
Hope this helps someone as it's frustrating trying to solve these install dependency issues - especially if the focus is on finishing some other task. Perhaps someone could confirm where this needs to be fixed as the problem is probably due to an upstream dependency.

ziv667 wrote:HOOKS="base udev autodetect modconf encrypt lvm2 block filesystems keyboard fsck"
Where's the keymap hook?
HOOKS="base udev autodetect modconf keymap encrypt lvm2 block filesystems keyboard fsck"

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Why is that i can not view my warranty status? whenever i tried to put my phone's serial number itunes prompt that my serial number is not a valid one. how can i solve this issue?

why is that i can not view my warranty status? whenever i tried to put my phone's serial number itunes prompt that my serial number is not a valid one. how can i solve this issue?

https://selfsolve.apple.com/agreementWarrantyDynamic.do

I'm trying to sync a new i phone to i tunes. I get message that says cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?

I'm trying to sync a new iphone into i tunes. I'm getting a message that says that this iphone cannot be used because the apple mobile device service is not started. Any idea what I can do to solve this issue?

See Here...
AMDS for Windows
http://support.apple.com/kb/TS1567
AMDS for Mac
http://support.apple.com/kb/ht1747

My iPhone says that my charger is not supported, but it's the charger that came with my phone. Is there any way I can solve this issue?

My iPhone says that my charger is not supported, but it's the charger that came with my phone. Is there any way I can solve this issue?

Try cleaning out the phone's port, of pocket fluff and such. Carefully. And check the mains adapter similarly, but less likely.

[SOLVED] Yaourt issue - query's dependency (yajl) not installing

Similar Messages

Maybe you are looking for