Some smart album rules not working

At a bit of a loss here - either my upgrade to Mavericks or my upgrade of Aperture to 3.5 has caused my Smart Albums to not work with various EXIF checking rules.
I frequently have rules which check the EXIF tag, Camera Make, and check if it is Canon - this allows me to filter out and focus on my Canon 5D3 photos and not get distracted in relatively pointless editing of iPhone snaps. Unfortunately it doesn't work. Camera Make is Canon returns no matches, Camera Make starts with Canon returns nothing, Camera Make ends with Canon returns nothing.
If I go and look at a photo, I can see the Camera Make exif flag says "Canon" in the field. No spaces at the end or anything silly. It used to work.
Anyone experienced similar? Anyone have solutions?

Hmm, interesting. Given your use of quotes I just tried "Canon" including the double quotes, but that made no difference either.
The EXIF filter is the only rule on the smart album, and while the smart album is set for a single project, there are several hundred photos that should match in it. If I set the smart album to "Library" rather than the project, it still matches none...! Just in case there's some other rule burried away that just isn't displayed, I switched the smart album to "Match Any" rather than "All", and that too returns no photos.

Similar Messages

  • Smart Guides Do Not Work

    My smart guides do not work. From the time I loaded CS5 they have not worked. If you go to View > Grids & Guides > the Smart Guides are grayed out.
    Then if you go to the Control Panel > View Options, the smart Guides are not grayed out they are checked.
    I have looked around and read trying to find out whats up with these guides but have not found anything the works. I have also uninstalled InDesign and reinstalled. This stall did not work.
    If anyone has any idea of why or how to get the guides to work that would be great.
      Thanks for your help...
                                   HHud

    You must have Snap to Document Grid enabled.
    Why is [Some Feature] Grayed Out in InDesign?

  • Videos in some iPhotos Albums do not show up on Apple TV.

    Videos in some iPhotos Albums do not show up on Apple TV. Videos in other folders are there. For instance, one album has 43 videos and 1600 photos. Apple TV only shows the 1600 photos. Is there an issue with albums that have both photos and videos?

    You can only view that rental on the iPad. For it to show up it has to be rented directly on ATV or through a computer and streamed via home sharing

  • My smart cover is not working on my new iPod 3 ( wifi 4g ) even the smart cover option is not in my setting menu but mIn my wife device it is working good would help me

    My smart cover is not working on my new iPod 3 ( wifi 4g ) even the smart cover option is not in my setting menu but mIn my wife device it is working good would help me

    The setting for iPad cover lock/unlock is in settings > general for iPad 2.
    The iPad 2 and new iPad if both are using iOS 5.x or later the setting exist in settings > general.
    So, if you worked at an apple store I think you should have known that the setting exist.
    You are right, a hard reset (force restart) should only be used if iOS device is unresponsive or apps crashing...etc.
    But, a simple restart helps as well.

  • [svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

    Revision: 5019
    Author: [email protected]
    Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
    Log Message:
    ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
    QE Notes: None
    Doc Notes: None
    Bugs: -
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

    Hi DST
    This is a great effort and gesture. thank you on behalf of all the newbies.
    PJ

  • Infopath form load rule not working in browser forms but works on Client

    Hi
    I am working on an Infopath form and there are rules on form load. The form load checks for a value in a list, if the username() matches the one in the list, then the form would change its view.
    It works when I open it on client, but on the browser it fails.
    Have anyone encountered such an issue.

    Check below:
    http://stackoverflow.com/questions/16222681/infopath-rule-is-not-running-when-checking-sharepoint-list-field-value
    Ensure that "Include data for the active form only" was checked (I had to separate this field into another data connection because that box could not be checked for another field I was using), and
    Ensure that in the rule I was selecting from the "dataFields" folder under the data connection instead of "queryFields"
    http://sharepoint.stackexchange.com/questions/28554/infopath-form-load-rules-not-working
    if I edit the Infopath form on Infopath 2007, it seems that the rules for the load form will be visible if created.
    This look like a bug. Here are the steps below that will lead you to the bug:
    Step 1: Open the infopath form in Infopath 2010 and create 6 rules for Form Load and Save it as a file.
    Step 2: Open that infopath form that you created in Step 1 in InfoPath 2010 and go to the
    Form Load section. You will only see the first 5 rules. The 6th rules that you created for Step 1 will just "vanish". Now, close that infopath form.
    Step 3: Open that infopath form that you created in step 1 in InfoPath 2007 and select Tools > Form Option. In the
    Open and Save category, click the Rules button and add a new rule in it and save it.
    Step 4: Open that infopath form that you modify as describe in Step 3 in InfoPath 2010. That 6th rule will be visible.
    Therefore, there might be a bug in InfoPath 2010 that restrict Rules to a max of 5 in Form Load and thus if anyone open that form in SharePoint, only the first 5 rules will be executed.
    If this helped you resolve your issue, please mark it Answered

  • I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it

    I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys.  What's really weird is that happens randomly.  I've never spilled anything on it, and I can't for the life of me figure out how to fix this.  Can anyone help?  of course this happened after my warranty expired.

    **update**
    I don't know if this will help someone but I am posting this for that purpose.  In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!).  Well I didn't want to do that but it always stuck in the back of my mind.  I had given up, really, and was planning to take my MBP to the apple store.  But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working. 
    So, maybe try keeping the MBP in a cool place when it's off.  Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
    Hopefully this might help someone.

  • Defaulting Rules Not Working for Repair Orders in OM?

    Hi,
    Defaulting Rules have been setup for return line & standard line based on few conditions and it is working fine if we create a sales order directly from OM (Manual SO)?
    But in our project we are using  Depot Repair(Repair Orders), we tried to create a service request and then converted to a sales order here defaulting rules not working for repair orders?
    Please help me to solve this issue ASAP.
    Thanks,
    Kishor

    Hi,
    You have like this:
    1. Price list
    2.OE_DEFAULT_PVT.Get_SOB_Currency_Code
    You have to make
    1. XXOE_DEFAULT_PVT.custom_code
    2. Price list
    3.OE_DEFAULT_PVT.Get_SOB_Currency_Code
    Did you made own custom code to pick currency?
    Regards,
    Luko

  • For some days imessage does not work, neither on ipad nor on iphone. also email on iphone does not work.

    for some days imessage does not work, neither on ipad nor on iphone. also email on iphone does not work.

    Hello Redpanda68,
    The following article provides information and troubleshooting steps that can help get Messages and Mail working.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Cheers,
    Allen

  • Got new ipad.Some iTunes albums did not transfer. They have a cloud symbol with a down red arrow next yo the songs. Any advice?

    Got new ipad. some iTunes albums did not transfer. They have a cloud symbol with a red down arrow next to the songs . Any advice?

    Welcome to the Apple Community AppConf.
    Tap the cloud icon, they will download to your device.

  • For some reason this is not working

    I am a fairly new (but not completely inexperienced) flash
    user, and I am trying to do something which I thought would be
    relatively simple but has turned in to a huge production. Basically
    all I want is some animated text that is also a button that goes to
    the next scene. The text just sits there on the stage, cycling
    through different colors, and then when you click on it, it goes to
    the next scene. I was really sure I knew how to do this but for
    SOME reason it is not working. I have provided a link to my .fla
    file for reference. What am I doing wrong?
    .fla
    file here

    You're not likely to get anyone to download your movie - but
    to make text a
    button the best bet is to turn it into a movie clip. Then you
    just give it
    an onRelease:
    myText.onRelease = function(){
    gotoAndPlay("myScene");
    Also it's advised to not use scenes.
    Dave -
    www.offroadfire.com
    Adobe Community Expert
    http://www.adobe.com/communities/experts/

  • ITunes album view not working and no album art?

    Hi all -
    Bought a 64GB iPhone 5 and uploaded my music via my desktop - all seems to have run fine, except that album artwork isn't showing for many of them, even when I select the option "View artwork".
    I've read on another thread that ID3 tags of 2.3 or lower are not supported, but find it hard to accept there's no compatibility here - so am presuming user error rather than Apple trying to force users to manually update all their albums (I have 57GB of music - don't want to update album art on everything!)
    Also, I've just downloaded and installed iTunes on my laptop, and connected the iPhone to laptop. However, the album view options aren't working. All songs are simply listed by album name, but none of the column listing features work either (ie, sort by name, genre, etc).
    I presumed iTunes had crashed, but restarting the laptop and the same happens. Am on latest software for iTunes and iOS 6.
    One more curiosity - how do I download my music from the iPhone to the desktop? I had presumed it would do this automatically (ie, into the iTunes media folder) but so far nothing.
    Or is it simply the case that iTunes is preparing to download all music into the desktop, hence why it's not working properly? Simply because there's no notice of anything happening.
    Apologies for any newbie questions - found myself using the iPad quite a lot for apps, but never for music as it was only the 16GB version, so have been sold into joining the Apple walled garden. Would be nice to get these issues sorted out, though.

    Hi David
    Yes, I found the importer now. I also fixed my problem, but with 'brute force':
    For each of the folders not being indexed, including the ~/Library/Mail folder, I turned on Privacy in the Spotlight System Prefs and then turned it off again. This seems to have fixed things. I did this for some old document folders too and that also seems to have worked.
    So far so good. thanks again. For now I'm marking this as solved.

  • Delete rule not working

    I subscribe to a mailing list using a particular email address (not my primary account), all mail for which is redirected into a mailbox. I only want to keep messages from the last five days. I have a Rule which is set as follows:
    If ALL of the following conditions are met:
    Account = <the account>
    Date Received is Greater Than 5 days old
    Perform the following actions:
    Delete Message
    This rule does does not work. It is the first rule in my list of Rules. And it simply does nothing. Why?

    Maxplanar,
    Mail rules only run when the item is first processed. So you are in effect going to delete things only when they are received in an "old" state.
    I would set up a smart mailbox or two. One to only show the 5 days of mail you want to pay attention to. Optionally make another smart mailbox to contain messages older than 5 days. You can just refer to the first mailbox and only see the messages you want. The other mailbox will be there for once a month when you select all the messages and delete them.
    Most macs can handle 5 to 10 thousand messages without even starting to slow down. Perhaps once you have a managable folder that shows you the messages you care to see, you can live with manually cleaning up much less often?

  • Role membership rule not working

    Hi guys,
    When I create a role and assign 'membership rule' to it, the members are shown in preview screen.
    But they are not  show up in members screen of that role.
    My environment is 11gR2 SP1.
    It is working nicely in 11gR2 base. But from some bundle pack and after, it is not working.
    1. is it right?
    2. if then, why is it changed?
    3. and how shoul I assign members to role?
    (as a workaround I modified the memner arrtibute. => not working
    and restart OIM, => still not working
    and reboot the server.> still not working...)
    can anyone help this?
    regards,
    dongsu

    J,
    It has been a critical issue in real customer project this year.
    Certainly we informed it to local oracle team and they says it is intentional change and we have to accept it.
    (means create role first and read in users by trusted recon from source again.. bra bra..)
    But I do not get any documented information about it.
    Actually in BP4 (may be..) if I change any attribute value of that user who supposed to  belongs to that role, then it works.
    But in BP7 and now in PS1, even that approach do not working.

  • Query Rule Not working As Expected

    I'm trying to make a rule that will let me know when a server is not in one of 3 AD groups. This is the Query I have:
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.OperatingSystemNameandVersion like "Microsoft
    Windows NT%Server%" and SMS_R_System.SystemGroupName != "FWS\\Server Patching - Low" and SMS_R_System.SystemGroupName != "FWS\\Server Patching - Medium" and SMS_R_System.SystemGroupName != "FWS\\Server Patching - High"
    Currently there are no members of this collection even though there are some servers that are not part of these 3 groups. If I change the != to = I get the members of the group, so it seems like it should be working.
    Thanks,
        Ed

    Here is logic takes a side step.  You can't use != because everything is !=.  what you need to do use a subselect statement:
    general ID:
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.OperatingSystemNameandVersion like "Microsoft
    Windows NT%Server%" where machine not in(
    Select ResourceID  from SMS_R_System  where SMS_R_System.SystemGroupName  like %FWS\\Server Patching%)
    Basically what you do is look in the group and grab all the machines and then exclude those machines.  
    http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com

Maybe you are looking for