Sort field in search term

Hi expert,
I have a field in the vendor search help list that is can not be sorted. Normally we can sort the field by clicking on that respective column, from the vendor search help list, all the field can be sorted, except 1 field can not be sorted.
Is there any place in config i should set?

Hi,
goto
IMG> Financial Accounting>Accounts recievable and accounts payable>Master data>preparation for creating vendor master data--> define screen layout per company code
make the settings wat u like
i hope this will solve ur problem
thanks,
Swathi

Similar Messages

Since Firefox updated yesterday, it won't respond to addresses in the url field or search terms in the search engine field. I can only go to addresses already in my bookmarks.

When I type an address into the url field the browser will not load the page...it just sits there as though waiting for me to press enter. Also it won't respond to the recently used addresses that show in the dropdown menu. It will also not respond when I try to use the search engine field (google). This started yesterday after Firefox automatically updated to version 3.5.9. I don't get an error message, just no response at all.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
This can also be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Help in Match-code for field SEARK (Search Term)

Friends, in my aplication was necessary insert the match-code for SEARK field.
I use the function module RH_OBJID_REQUEST in the form OPEN_BOX2 at the event AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_requi-low.
When I use this match-code and select the 4 itens and clique the OK button, only the last item appears in the field.
Anyone else had this problem?
Can someone help me?
Thanks for listening.
Below is the code:
select-options:
so_requi    for pm0d1-seark no intervals .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR so_requi-low.
PERFORM open_box2 CHANGING so_requi-low.
form OPEN_BOX2 changing p_so_requi_high.
Variáveis
DATA: h_plvar LIKE p1000-plvar,
        h_otype LIKE p1000-otype,
        h_objid LIKE objec-realo,
        h_begda TYPE begda,
        h_endda TYPE endda,
        p_subty TYPE plog-subty.
tables
DATA: p_change_profq LIKE hrpe_profq OCCURS 0 WITH HEADER LINE.
preenche as variantes para os parâmetros da função
h_plvar = PCHPLVAR.
h_otype = 'Q'.
h_begda = sy-datum.
h_endda = '99991231'.
DATA: sel_objects LIKE objec OCCURS 0 WITH HEADER LINE.
popup with qualifications catalogue
CALL FUNCTION 'RH_OBJID_REQUEST'
       EXPORTING
            plvar                 = h_plvar
            otype                 = 'Q'
            seark                 = '*'
            seark_begda           = h_begda
            seark_endda           = h_endda
            set_mode              = 'X' "multiple choice
       TABLES
            sel_objects           = sel_objects
       EXCEPTIONS
            cancelled             = 1
            wrong_condition       = 2
            nothing_found         = 3
            illegal_mode          = 4
            internal_error        = 5
            OTHERS                = 6.
Captura os dados selecionados e passa para o select-options
   free: so_requi.
   if sy-subrc = 0 .
     loop at sel_objects.
       clear so_requi.
       so_requi-sign    = 'I'.
       so_requi-option = 'EQ'.
       so_requi-low     = sel_objects-objid.
       append so_requi.
     endloop.
   endif.
endform.                    " OPEN_BOX2

Hi
I am sorry I thought that it is TPLNR field
for EQFNR there is no matchcode or search help
if you want you can create a matchcode/search help and add
It is a CHAR 30 field for which most of the times no values are entered
Reward points for useful Answers
Regards
Anji
Message was edited by:
        Anji Reddy Vangala

Vendor Search Term Field

Hi filks,
I want to use second field of Search term in Vendor master General data, please provide me the field name.
Intable only one field is available that is SORTL, while I want the field name for second field.
Regards

Hi ,
please let me know how you achieved this functionality .
Thanks and regards,
Rajeshwar.

Search Term in Search Help for SAP Users - su01

Hello ,
we want to use the search Term fields in the user data. (T-Code SU01)
As I read in the F1 help, these Fields should be available in the F4 Matchcode for Users?
But there is no field available? Any Ideas?
SAP ECC6.0
SP Stack 13
Regards
Tobias Werner

When you open the User data with t-code su01 , there are 2 fields named "Search Term 1/ 2".
huh?.... not really following you. when you open user data in SU01 you see well... the user data.
Regards
Juan

Vendor Search Term 2

Dear Friends,
I want to make mandatory field of search term 2 in vendoe master creation for some paricular vendor type.I have checked in vendor configuration by T Code OMSG, but there is no option for search term 2.please help me...
Regards,
Dishant

hi,
try in OMSG in the search term b make it as req.entery then and save
and check it once search term 2 is allways as mandatory field in at the time of vendor creation in standerd.
thanking you

Tag Cloud to show search terms with zero results

I have been following the blue print document that we have regarding our OEID system which is under development at present.
We have a field called Search Terms which contains the text the user or the navigation has searched for. At present we have a tag cloud that shows the most popular. We also need to show the ones which are at the top of the "yeild zero results" list.
Looking at the Tag Cloud component and after reading the documentation on the tag cloud, it would not seem possible to create an EQL query to do this. Therefore would I have to create a custom attribute when I'm parsing our raw data to do this, then be able to display the 30 or so most popular search terms that yeild zero results, or is there a better way of doing this?

That issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Transaction xk03 - Search term

hello, in the transaction xk03:
Step 01:You check the adress checkbox and validate.
1)On the display vendor:address screen, there is a field named search term 1/2,
2)When i press F1 on the field, technical options , i get the structure ADDR1_DATA-SORT1.
I would like to know the name of the table where the search term values are stored(SORT1).thx

Sooness,
Start transaction SE11 and display table ADRC.
Click the Indexes button.
You may find the SAP defined index I13 for the SORT1 field.
So, all address data is in table ADRC. And an extra database index exists for the sortfield. As far as I know you cannot access / read this database index using normal abap.
Ger

"Search Term" fields in SU01

Hi experts,
Issue concerns my CRM 6.0 back end system. Here, I have a requirement to pull out a list of all users created without any value in field "Search Term 1" under Adress tabI found an old thread from some years back which says this field is not part of any user tables as it fell under address management back then:
SU01 Search Terms
Does anyone have knowledge on how I can run this query? SUIM, change history etc has no option to do a user search on this field. I checked out most of the user tables (USR*) and none of them also have this field "Search term 1" in them.
Also for some users on the same system this field is not visible alltogether (No header in SU01 --> Address which shows "Search terms" at all).
I am a little confused. Any help would be great....
Edited by: Soumya-Thomas on Mar 3, 2011 9:56 AM

Hi Julius,
Just noticed your answer to my thread, this is what I did:
Table ADRP - got a list of all users (on field PERNR) with field value Search term1 (SORT1) against eahc user.
Table USR21 - mapped the above PERNR value to user name here.
Thus got a list of all usernames + Search Term1 (SORT1).
Also, i didnt really use authority checks against the field Search Term.. may be it is used soemwhere, but i didnt get into that; since my mission was only to make sure that a set of users (as per our policy) were all created with specific reasons entered in "SU01 --> Search Term1" during user creation. For me it was a user master data updation task.
Soumya

Vendor master data-sensitive field search term 1

Hi
Incase of Vendor master data ,i have defined search term 1 AS SENSITIVE FIELD.
When i change the master data i.e search term 1 sometimes it asks for change confirmation and sometime it doesnt.
Can you pls let me know why does this happen..that too for few vendors any logic.

resolved

FullText Searching using a search term from a field

Say I want to compare two tables using FullText searching, one table has the content to be searched, and the other table has a list of search terms (to be evaluated separately). I have not found a way other than using cursors to cycle through the search
terms to capture the results. The FullText search term appears to only allow 'text strings' or @variables, but not [Field]'s. Is there a better way to approach this for batch processing?
Another usage that I see merit for FullText searching is duplicates detection within existing data sets. Is there a way to perform INNER table joins using FullText - or do we have to fall back on CURSOR iterative methods again?
Thanks,
Jay :)
If you shake a kettle, does it boil faster?

Hi M.
Apologies for the delay in responding...
The links provided are for searching in multiple columns at once (a single search) or return ranked results (again single search). Is there a way to perform multiple searches at once, i.e. batch processing?
Thanks,
Jay
If you shake a kettle, does it boil faster?

Search help for search term field in xk01

hi experts ,
i searched for the search help fild search term 1/2 in xk01(vendor master data ) in sdn i get note .
i followed note done the three steps sucessfully . now i tested xk01 transcation when i press f4 button on sort1 field its give a message no in put data available .

Sorry
perhaps I haven't understood:, you've written:
i searched for the search help fild search term 1/2 in xk01(vendor master data ) in sdn i get note .
i followed note done the three steps sucessfully
What do you mean? Which steps?
Max

FI01 - Bank Master - Search Term 2 - Field Statu

Hi All
Can anybody tell me how the field status of Bank Master maintained? (I want to have "Search Term 2" field in the Bank Master. How can this be achieved)
Regards
Rajesh

Thanks for the response, Tao. But my question is not how to use Search Term 2, but how to use it as a matchcode.
For example, we have vendor Dr. John Smith / ABC Hospital. In the vendor master, we have entered 'Smith' in Search Term field 1, and 'ABC' in Search term field 2. Later on, users would like to run a report for this vendor, but they do not know the vendor number. So, they would do an 'F4' in the vendor field. The screen that comes up only show one Search Term field, and when they enter 'ABC' in that field, the system does not find a match. However, if they enter 'Smith' in the Search Term field, then the vendor will be found.
So, my question is how can we enable users to search for vendors by using values in Search Term 2 field.

Sort field in maintenance order

Hello;
I want to make sort field in maintenance order as a mandatory field. But if I make it as a mandatory field, system still allows me to save the order as long as I have not clicked 'Location' tab. So there is no positive control over this field. May I know, how do I achieve this? I have even tried to put order type as the influencing field but it does not help.
Points assured.
Regards
Hemant

Hello Hemant,
access to the SAP service marketplace via www.service.sap.com to create an OSS message. Choose link "product errors". Therefore you need an OSS user and you have to be authorized to create OSS messages.
To create an user-exit, you have to go to transaction CMOD. There you have to create a project and assign the enhancement you want to use (I'm not really sure, but I think IWO10009 is the correct one in your case - you can search the user-exits via transaction SMOD - search for IWO*).
After this you have to implement your coding and then you have to activate the project.
The implementation of the user-exit should be done by an ABAP developer.
By the way - I've had a look at the OSS. There's note 768576.
Reason and Prerequisites
The problem is caused by a missing function.
Influences set via field selection will only become effective if a screen with the corresponding fields is processed. You must also refer to the documentation defined in the corresponding Customizing area. For the location & account assignment data, no additional check is (such as with the general order header data) is realised during the saving.
Prerequisite
Via field selection you declared fields of the location & account assignment data as mandatory field, and no screen that contains these fields was passed.
Solution
By means of the example code, you must implement a corresponding mandatory field check via customer enhancement IWO10009 at the time of the order backup.
1. Create subroutine Z_IWO10009_GET_DATA_FOR_FAW in program SAPMILA0. It would be best if you create an own include ZMILA0F1 for this so that you will not have any unnecessary expenditure for future Support Packages (via Transaction SE80).
FORM Z_IWO10009_GET_DATA_FOR_FAW.
CALL FUNCTION 'CO_IH_GET_HEADER'
       IMPORTING
                 CAUFVD_IMP = CAUFVD.
CALL FUNCTION 'CO_IH_GET_ILOA'
       EXPORTING
                 CAUFVD_IMP = CAUFVD
       IMPORTING
                ILOA_WA    = ILOA.
ENDFORM.                    "Z_IWO10009_GET_DATA_FOR_FAW
2. Create the following source code in customer enhancement IWO10009:
STATICS: XTFAWF LIKE TFAWF OCCURS 0 WITH HEADER LINE.
tables: tfawf.
DATA: wa_screen    LIKE screen.
FIELD-SYMBOLS: 'A'.
perform Z_IWO10009_GET_DATA_FOR_FAW(SAPMILA0).
if xtfawf[] is initial.
    SELECT * FROM TFAWF INTO TABLE XTFAWF
             WHERE PROG = 'SAPMILA0'.
endif.
LOOP AT XTFAWF WHERE CUST_M = 'X'.
    CALL FUNCTION 'FIELD_SELECTION_INFLUENCE'
         EXPORTING
              dynprogruppe = '7   '
              mode        = 'C'
              modulpool    = 'SAPMILA0'
              fieldname    = XTFAWF-MFELD
         IMPORTING
              input        = wa_screen-input
              output      = wa_screen-output
              active      = wa_screen-active
              required    = wa_screen-required
              intensified = wa_screen-intensified
              invisible    = wa_screen-invisible
         EXCEPTIONS
              OTHERS      = 1.
    if wa_screen-required = 1.
      clear lv_mfeld.
      lv_mfeld = 'CAUFVD_IMP-'.
      case XTFAWF-MFELD.
        when 'ILOA-AUFNR'.
          lv_mfeld+11 = 'IAUFNR'.
        when 'ILOA-KOKRS'.
          lv_mfeld+11 = 'IKOKRS'.
        when 'ILOA-BUKRS'.
          lv_mfeld+11 = 'IBUKRS'.
        when 'ILOA-GSBER'.
          lv_mfeld+11 = 'IGSBER'.
        when 'RILA0-ARBPL'.
          lv_mfeld11 = xtfawf-mfeld6.
        when others.
          lv_mfeld11 = xtfawf-mfeld5.
      endcase.
      ASSIGN (lv_mfeld) TO IS INITIAL.
        Message E461(IW)
        with 'Mussfelder der Standort&Kontierungsdaten füllen'.
        EXIT.
      ENDIF.
    endif.
endloop.
endif.
3. Activate the changes
Correspondingly you can implement this solution also for the order release, for example, via customer enhancement IWO10002.
Bear in mind that this is a source code proposal. It might be useful or necessary to adjust this source code to special applications.
Best regards
Stephan
Edited by: Stephan Theis on Jan 5, 2008 11:20 AM

How do I link to a HelpID or a Search Term without any programming, through a URL?

I have looked through the documentation, and it seems that every "possibility" to call either a search term or a HelpID/CHSID for my documentation is to use some sort of API.
Is there a way to call the search function and CHSIDs directly by only typing a URL in a browser (or link from another page, or from an email, etc etc)?
I'd actually like to know for all 3 outputs I am potentially going to be using: WebHelp, WebHelp Pro (RoboHelp Server 9) and HTML5, as I'm not sure yet which form it will take at the software release.
Thanks!

Hi OL-Lachance
A couple of items I would add to Willam and Colum's comments.
At the present time, WebHelp Pro (the Rh Server 9) does not support HTML5 output. WebHelp on a conventional web server is fine.
In terms of the odd terminology for CSH, the term MAP Number or Map ID, generally refers to a unique number that is assigned to a topic so that it can be referred to in the application calling the help. The Topic ID is generally an alphanumeric string which is often the name of the topic title connected by underscores. Depending on the language of the application, sometimes only the Map number or sometimes only the Topic ID is used. Or, as you have learned, sometimes neither one is used and a URL is used instead!
You and your developers may also find these topics helpful in the RoboHelp online help which can be downloaded here:
http://help.adobe.com/en_US/robohelp/robohtml/robohelp_11_help.pdf
Look at Chapter 11 for some interesting specifics on the many ways to call CSH. Of course the links mentioned in Willam's and Colum's posts are excellent as well.
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

Sort field in search term

Similar Messages

Maybe you are looking for