Sorting not working on a report :(
Hi I have a very simply report where data comes from the following query
Select substr(b.field1,2,16) CARDNUMBER,
trim(substr(b.field2,89,40)) cardholdername,
to_date(substr(b.field1,18,6),'mmddyy') POSTINGDATE
from tablename;
I have checked the radio button that says "Use Query Specific column names and validate query".
Now in the report attribues, I select the sort checkbox on card number and run the query, I get an error. when i uncheck the ort checkbox, error is gone Please note that in report attribues, Alias is "cardnumber" and heading is "CARD NUMBER". It gives me the following error:
failed to parse SQL query:
ORA-00911: invalid character
Any comments or suggestions will be appreciated.
Thanks again
Hi,
If you remove the trailing semi-colon character from your query, does the sorting work for you?
John.
Similar Messages
-
Sorting not working in a report with hyperlinks
I have a report with hyperlinks for one column and I noticed that sorting is no longer working on that report. If I use another version of the same report witout hyperlinks; sorting does work fine.
I was wondering if anyone has encountered this issue before and what would be the solution.
Thanks!I didn't remove the sorts and was trying to sort again on another column.
So this is resolved.
Now another issue; when viewing this report in Interactive mode; the column with hyperlinks doesn't have the sort option when I right click on that column. The sort option does show up but it's grayed out (disabled). When I go to Edit mode; it does allow me to sort on that column.
Anyone has noticed this? -
Share calculation Not working in the report
Iam surprised not to ge the simple share calculation not working at my report.
I have a dimension and corresponding values ( measures) .I made a Total at the end of the report. and I want to calcualte share of Total to each corresponding value.
how to do this, any thougts,...
I have used calculated memebers for this, But I wan to make the percentage of the total ( which is calculated inside Tool itself)
Please help....Prassad,
Not totally sure what you are trying to achieve but there a couple of possible solutions:
1) Total = total of all dimension members. Assuming you only have three dimension members then you should have a fourth member called ALL_DIMS or something similar. In the Share calculation template you need to specify the Total level as the basis for your share calc. This will generate the following result:
Revenue % Share
- All Members 600 100%
A 100 17%
B 200 33%
C 300 50%2) The total you are referring to is in fact a sub total and is the result of adding together only the results for A + B + C, i.e. you have hundreds of dimension members but you specifically want to see a total for just these three members. To do this create a new custom aggregate call "My Total" and add together the dimension members A + B + C - Custom Aggs are a new feature to Discoverer OLAP (Checkout Mark Rittman's excellent blog article for more information on this feature: http://www.rittmanmead.com/2006/11/13/checking-out-the-new-discoverer-101220-features/)
Then in the Share calculation wizard set the basis for your index using the last option in the list "Specific Dimension Member" and select your new custom aggregate member.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/ -
LOVs not working in Webi Report for SAP BO 4.1 SP 2 Patch 3
Hello ,
I have developed reports and universes in SAP BO 4.0 SP 5 and i have migrated those reports to higher version of BO which is 4.1 SP2 Patch 3.
My universe is working fine with LOVs but when i run the webi report , the LOVs arent working.
have anyone facing the same issue. any idea why the LOVs arent working on higher version.?Hi Victor,
The List of values we will assign in universe in order to get filtered data works on universe query panel
but the same objects when i am using in report(webi report) , the List of values are not working .i.e
they are not getting displayed in webi report.
for ex: i have country object having country names as LOVs and state objects having state names as LOVs . Now when i select Country value , the LOVs of state objects should get filtered and shows only states which belongs to country .
the above logic is not working in webi report , i am only able to select country and when i go for state, the state names do not get filtered.
please let me know why this is happening in the SP2 patch 3 version and its working fine for SP2 , but the chrome issue gets solved after applying patch 3 and not if we only upgrade to SP2.
the webi reports are not working in chrome browser if we using SAP B04.1 SP2 and lower version
but the LOVs are not working in SAP BO 4.1 SP 2 patch 1, 2,3.
kindly help me with the issue -
Trying to get a refund on an app that do not work, but the report a problem button is grey out
Hi
I'm trying to get a refund on an app that do not work, but the report a problem button is gray out & Apple wants £20.00 for support
where do I go from here
ThanksTo report a problem less than 90 days:
http://reportaproblem.apple.com
Sign in with the AppleID and Password used for the purchase.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
To report a problem greater than 90 days:
http://www.apple.com/support/itunes/store -
Security option is not working for PDF Report
security option is not working for PDF Report , e.g password , bug??
what version of SQL Developer are you using?
-
Sorting not working correctly for date field in alv report
Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work -
We are in the process of changing everything over from the 3.5 .net framework to the 4.0 .net framework. As part of this, we are also upgrading Crystal Reports to version 13. We have a 32-bit Windows Server 2003 with the latest patches.
I have installed the latest CRRuntime_32bit_13_0_1.msi install program on our server and I have installed the 13.0.1 CR for VS on my local development machine.
The issue I am having is this. We have a fairly large Crystal report with numerous subreports. This report was working perfectly prior to installing all these latest patches/releases. There are two small subreports that use to sort perfectly, by a year column, in descending order. Now, they are sorting by year, in ascending order. The data is not sorted on the report itself, but in the datatable in the VB.net code that is used to populate the subreport. We use code like this to populate the subreport:
Report.Subreports("Pensionable_Earnings").Database.Tables("GroupedEarnings").SetDataSource(CType(EarningsInputs, DataTable))
Does anyone know of a specific reason the sort would have just stopped?
For what it is worth, there are two references that I have not added to my VS2010 project targeting the 4.0 framework. The 3.5 version had references to CrystalDecisions.Enterprise.Framework and CrystalDecisions.Enterprise.InfoStore, but I didn't see these when I tried to add references to my 4.0 version, so I just left them out. I didn't get a compile error, but I wonder if this could be causing the issue?
Thanks!!!!
PaulSee if the demo [Sorting and Filtering with Crystal Reports for Visual Studio 2010|http://www.sdn.sap.com/irj/scn/elearn?rid=/library/uuid/504d77eb-892a-2d10-c0b9-c9b6da1e1ffa] helps.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports] -
Sorting not happening in Union reports
Experts, we upgraded from 10g to 11g. I have a union report on which Sorting was working in 10g but sorting is not happening in 11g. Is anybody aware of it how to solve or is there any parameter in any of the config files which can make it work?
thx,
paragGive more extended information please. What is 11g version? Is it excluded column? Does column have an alternative sort column?
-
SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer
I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
It is working correctly in the report manager.
<Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
<OverrideNames>
<Name Language="en-US">TAB delimited</Name>
</OverrideNames>
<Configuration>
<DeviceInfo>
<FieldDelimiter xml:space="preserve">	</FieldDelimiter>
<Encoding>ASCII</Encoding>
<UseFormattedValues>False</UseFormattedValues>
<NoHeader>False</NoHeader>
<FileExtension>TXT</FileExtension>
</DeviceInfo>
</Configuration>
</Extension>Hi Dave0323,
According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
file like below:
The result looks like below:
Reference:
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
ALV Sorting Not Working after Adding Checkbox to ALV
Hi All.
I am currently doing an ALV report using REUSE_ALV_GRID_DISPLAY function. I am sorting the list by Employee Name and Personnel Area. It works fine where the personnel are field and employee name field are merger together for same personnel are and employee name. But afterwards I added a checkbox field to the internal table and the list outputs a checkbox for each line. Afer putting the checkbox the list no long merges the same personnel are and employee name fields according to original sorting.
Can anyone explain if there is a way to solve this?
Thanks a lot.
Lilyyes there is a way. Just see this..
There is no Straight forward solution. There is a work around.
REPORT ztest_check_box .
TYPE-POOLS: slis,icon.
DATA: BEGIN OF it_vbap OCCURS 0,
vbeln LIKE vbap-vbeln,
matnr LIKE vbap-matnr,
posnr LIKE vbap-posnr,
kunnr LIKE vbak-kunnr,
kwmeng LIKE vbap-kwmeng,
check TYPE c,
id TYPE icon-id,
END OF it_vbap.
DATA: it_fieldcat TYPE slis_t_fieldcat_alv.
DATA: x_fieldcat TYPE slis_fieldcat_alv.
DATA: it_sort TYPE slis_t_sortinfo_alv,
x_sort TYPE slis_sortinfo_alv.
SELECT vbak~vbeln
vbak~kunnr
vbap~posnr
vbap~matnr
vbap~kwmeng
INTO CORRESPONDING FIELDS OF TABLE it_vbap
FROM vbak JOIN vbap
ON vbak~vbeln = vbap~vbeln.
SORT it_vbap BY matnr.
DELETE it_vbap WHERE matnr IS INITIAL.
LOOP AT it_vbap.
it_vbap-id = '@T9@'.
MODIFY it_vbap.
ENDLOOP.
x_fieldcat-fieldname = 'ID'.
x_fieldcat-seltext_l = 'CHECK'.
x_fieldcat-outputlen = 4.
x_fieldcat-icon = 'X'.
x_fieldcat-col_pos = 1.
x_fieldcat-hotspot = 'X'.
x_fieldcat-tabname = 'IT_VBAP'.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
x_fieldcat-fieldname = 'MATNR'.
x_fieldcat-seltext_l = 'MATNR'.
x_fieldcat-col_pos = 2.
x_fieldcat-tabname = 'IT_VBAP'.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
x_fieldcat-fieldname = 'KUNNR'.
x_fieldcat-seltext_l = 'KUNNR'.
x_fieldcat-col_pos = 3.
x_fieldcat-tabname = 'IT_VBAP'.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
x_fieldcat-fieldname = 'VBELN'.
x_fieldcat-seltext_l = 'VBELN'.
x_fieldcat-col_pos = 4.
x_fieldcat-tabname = 'IT_VBAP'.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
x_fieldcat-fieldname = 'POSNR'.
x_fieldcat-seltext_l = 'POSNR'.
x_fieldcat-col_pos = 5.
x_fieldcat-tabname = 'IT_VBAP'.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
x_fieldcat-fieldname = 'KWMENG'.
x_fieldcat-seltext_l = 'KWMENG'.
x_fieldcat-col_pos = 6.
x_fieldcat-do_sum = 'X'.
x_fieldcat-tabname = 'IT_VBAP'.
APPEND x_fieldcat TO it_fieldcat.
CLEAR x_fieldcat.
x_sort-fieldname = 'MATNR'.
x_sort-spos = 1.
x_sort-up = 'X'.
x_sort-group = 'X'.
x_sort-subtot = 'X'.
APPEND x_sort TO it_sort.
CLEAR x_sort.
x_sort-fieldname = 'KUNNR'.
x_sort-spos = 2.
x_sort-up = 'X'.
APPEND x_sort TO it_sort.
CLEAR x_sort.
x_sort-fieldname = 'VBELN'.
x_sort-spos = 3.
x_sort-up = 'X'.
APPEND x_sort TO it_sort.
CLEAR x_sort.
*DATA:x_layout TYPE lvc_s_layo.
*x_layout-box_fname = 'CHECK'.
*x_layout-no_rowmark = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
* is_layout = x_layout
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = it_fieldcat
it_sort = it_sort
TABLES
t_outtab = it_vbap[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc ne 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form itab_user_command
* text
* -->WHATCOMM text
* -->WHATROW text
FORM user_command USING whatcomm TYPE sy-ucomm selfield TYPE
slis_selfield.
IF selfield-fieldname = 'ID'.
READ TABLE it_vbap INDEX selfield-tabindex.
IF sy-subrc = 0.
IF it_vbap-check = ''.
it_vbap-id = '@R7@'.
it_vbap-check = 'X'.
ELSE.
it_vbap-id = '@T9@'.
it_vbap-check = ''.
ENDIF.
MODIFY it_vbap INDEX selfield-tabindex.
ENDIF.
ENDIF.
selfield-refresh = 'X'.
ENDFORM. "itab_user_command
if you want to make the above code to work in lower versions then you have to do this..
then maintain the ICON using the view V_ICON from SM30 add the New Entry.
get the properties from the below screen shot.
http://img404.imageshack.us/img404/3338/testig9.png -
"Execute" is not working in web reports
Friends,
" Execute" link is not working in web my report. And also the selection screen is blank for style sheets. Do you have any idea about the cause?
JoeAlso check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/43008b6a-0901-0010-90af-c848d878bac3?rid=/library/uuid/cea68c65-0901-0010-f5a4-fd34189d8078
Hope it Helps
Chetan
@CP.. -
VBA After_Expand is not working in EVDRE Report
Hello Everyone,
I am working on a report that started redisplaying rows that are grouped and hidden after clicking on expand. I created a sub routine in VBA code that will hide the rows. I then created the After_Expand function to call the subroutine where it should automatically hide the rows once the expand button is selected. The After_Expand code is not working for some reason. When I click on the expand button the rows still re-display. However, If I click on the code in the VBA editor the rows are hidden after the expand. What can I do to make this happen automatically. The code is below.
Option Explicit
Sub HideRows()
' Called by AFTER_EXPAND
' Hides Rows 35,97,98,104,105 after an expansion re-displays it
Application.EnableEvents = True
Application.ScreenUpdating = True
'Sheets("Napco").Select
'Rows("35").Select
' Rows("97:98").Select
'Rows("104:105").Select
Selection.EntireRow.Hidden = True
Worksheets("Napco").Rows("35").EntireRow.Hidden = True
Worksheets("Napco").Rows("97:98").EntireRow.Hidden = True
Worksheets("Napco").Rows("104:105").EntireRow.Hidden = True
End Sub
Function After_Expand(Argument As String)
' This function is automatically called after OutlookSoft expands hidden rows
Application.EnableEvents = True
Application.ScreenUpdating = True
Call HideRows
Application.ScreenUpdating = True
After_Expand = True
End Function
Any help would be greatly appreciated!!
Thanks,
EleashaDear Eleasha Counts,
As I know and usually use the VBA in Input schedule. I have 2 opinion like as :
1. You can change "Sub HideRows()....End Sub" to be "Function HideRows()..End Function"
2. You should put your VBA function (HideRows and After_Expand) in Modules.
The step to add the modules in Ms.Excel:
a. Open the VBAProject through Ms.Excel
b. Right-click "Microsoft Excel Objects" and choose "Insert-Module".
Thanks,
Wandi -
Tabular form validation(Checkbox) is not working for Interactive report
Hi,
I am using the oracle apex 4.0 and oracle 11g.
I have written a below select query on interactive report as
select
apex_item.checkbox(1,RESIDD)||apex_item.hidden(2,RESIDD) row_selector,
apex_item.text(3,RESNUM) as resnum
from "PDRRES"
and written the validation to display the error message( Function returning error text ) as
DECLARE
vRow BINARY_INTEGER;
BEGIN
-- apex_application.g_print_success_message := NULL;
FOR i IN 1 .. apex_application.g_f01.COUNT
LOOP
vRow := apex_application.g_f01(i);
apex_application.g_print_success_message := apex_application.g_f01(i)||'-'|| apex_application.g_f03(vRow) ;
END LOOP;
END;
Output : No data found error message
As far as it work for sql report with above logic because apex built in row selector
but it fails in case of interactive report for some reason.
Please suggest.Saroj Nayak wrote:
Hi,
I am using the oracle apex 4.0 and oracle 11g.
I have written a below select query on interactive report as
select
apex_item.checkbox(1,RESIDD)||apex_item.hidden(2,RESIDD) row_selector,
apex_item.text(3,RESNUM) as resnum
from "PDRRES"
and written the validation to display the error message( Function returning error text ) as
DECLARE
vRow BINARY_INTEGER;
BEGIN
-- apex_application.g_print_success_message := NULL;
FOR i IN 1 .. apex_application.g_f01.COUNT
LOOP
vRow := apex_application.g_f01(i);
apex_application.g_print_success_message := apex_application.g_f01(i)||'-'|| apex_application.g_f03(vRow) ;
END LOOP;
END;
Output : No data found error message
As far as it work for sql report with above logic because apex built in row selector
but it fails in case of interactive report for some reason.
Please suggest.NO DATA FOUND usually occurs when an i mplicit select does not find anything. It can also occur when referencing a collection element that has not been defined.
You have 2 collectinons in the code you posted, apex_application.g_f01() and apex_applciation.g_f03. Since you are looping therough the COUNT attribute of g_f01 its reference ("I") is probably okay and the value store in vRow is probably not right. You can check this by using RAISE_APPLICTION_ERROR to see the value something like
raise_application_error(-20000,'vRow="'||vRo2||'"');Remember that working with checkboxes is tricky. If the box is not checked nothing will be sent. You may need to define a default value when no value is submitted. -
BW hierarchy variable not working in Crystal Report 2008
Hi,
I have created BEx 7.0 report which has hierarchy on 0customer object, the report is working fine whith hierarchy variable. I have created Crystal Report by using this query as source. I have followed below link to create grouping to get data through hierarchy variable.
http://wiki.sdn.sap.com/wiki/display/BOBJ/BWHierarchiesinCrystalReports
But report does not work for hierarchy variable and report is blank. When I give filter of child node which has actual data then I get report output. For ex.
Below hierarchy for 0customer
11396
- 737007
- 123456
When I run report for 11396 then no data display but when I run 737007 child node I get report output but with blank group name.
Can anyone came accross this issue. Please guide me . Thanks in advance.Thanks Ingo for your reply..
The word filter means, I have hierarchy node variable in the BEx report that has become Parameter in CR. When I give hierarchy node variable value of parent node then there is not data display but for the child node I get the data.
For ex. In the info cube there is data for 730707 customer but in the customer hierarchy the parent node of 73707 is 11396. I am giving 11396 in the variable pop screen for hierarchy variable. I do not see any data but for 73707 I get data.
User does not know 73707, he always enter 11396 customer no. and he gets data in BEx query that is source of CR. but crystal report is not showing data for 11396.
One more point I want to tell here, I am saving CR at my local system not to SAP BW server.
Hope this clear my issue.
Harish Swami
Edited by: hswami27 on Jan 31, 2011 8:17 PM
Maybe you are looking for
-
SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer
I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list. I have tested SSRS 20
-
Drag and drop not working in itunes?
I've recentlt udated to Snow Leopard and my itunes id up to date. First thing I noticed is that many things I used to do via drag and drop won't work anymore. or instance, i create a play list then I want to dag songs to it but it won't do it. I have
-
Master page is shown in the document
Hello There. I have a document with one empty page (first page). I am not able to delete this page. I allready fade in the command structure (Hierarchie). By clicking on this empty page the master page is activated. Is it possible to hide the master
-
Mov to avi but at a reasonable file size and res.
I want to convert a .mov file to .avi and have the avi at a file size of betwen 20-30MB - at the moment when I export from quicktime pro its' coming up with a file size of over 1GB - any suggestions much appreciated
-
2.2 MacBook Pro vs. Ultimate 2011 Air
Saw this question at macrumors and was wondering what the apple communty thought about this. without giving my uses for the comp and if both computers were available for the same price (i know, not likely but in this situation lets say it is) would y