SOS T430u

SOS
Hello hello all!
I'm new here and I have some questions
Thank you in advance for your help or links for me to learn
Clarification. 'I chose Lenovo. Other leaders wanted Dell. So help me before I do cut
because I ordered a set of 8 and already struggling with the first!
I migrated T430u Windows 8 pro 64
My problems and questions are:
How to program the bios correctly
UEFI for both, legacy
for the power management ...
I meet problems for the following facilities:
Autoscroll not install the driver file for lenovo site W8 -64
UltraNav works half the time for the left mouse button (button with the red line) below ok
Lenovo drivers wifi plant and does not settle the entire
Questions:
Windows 8 management ssd caching is it user configurable?
Battery manager no problem appears in the manager lenovo
Camera is very poor quality with skype own, why?
Lenovo connection is not active, i can not make hotspot for share my connect with another device
When I click stop windows : The T430 stops but I see that the green LED continues to flash
Sometimes for 1 minute
Sometimes it does not stop at all
Is this a form of sleep?
When the screen turns off then on again impossible
How to turn off the machine except savagely support 10s on / off not very good for the hard drive!
Update bios:
Need to install it via CD or the normal file in the matrix there are two files for the bios update bios bios and cd.
SOS
Hello bonjour à tous !
Je suis nouveau ici et j’ai quelques questions
Merci d’avance pour votre aide ou vos liens pour que j’apprenne
J’ai migré le T430u sous Windows 8 pro 64
Mes problèmes et questions sont :
Comment programmer le bios correctement
pour UEFI both, legacy
pour le power management …
je recontre des problèmes pour les installations suivantes :
Autoscroll impossible d’installer le fichier driver du site lenovo pour W8 -64
Ultranav marche une fois sur deux pour le clic gauche (touche avec le trait rouge) en dessous ok
Drivers wifi lenovo plante et ne s’installe pas en entier
Questions :
Sous windows 8 la gestion du ssd en cache est-elle paramétrable par l’utilisateur ?
Gestionnaire batterie problème rien apparait dans le gestionnaire lenovo
Camera est très mauvaise qualité avec skype propre , pourquoi ?
Impossible d’avoir lenovo connection
Lorsque je clique sur arreter windows
Le T430 s’arrete mais je vois la diode verte qui continue de clignoter
Parfois pendant 1mn
Parfois elle ne s’arrete pas du tout
Est-ce une forme de veille ?
Lorsque l’écran s’éteint impossible de le rallumer
Comment faire sauf eteindre la machine sauvagement appui 10s sur le marche/arrêt pas très bon pour le disque dur !
Mise à jour du bios :
Faut il faire l’installation via CD ou avec le fichier normal , dans la matrice il y a deux fichiers pour le bios bios update et bios cd .

There is no approved way to dowgrade your iOS software.

Similar Messages

Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

Every time I update LR to a new version I seem to need a patch to make it work..... once again here I am SOS! I've just update LR to the 5.7 version and It wont let me start it: The application was unable to start correctly (0xc000007b).

Your system is missing a couple DLLs that LR needs, but the fix at Adobe is to copy them to the LR folder which gets replaced for each install, so you have to redo it after each LR install. It would be worth documenting the process and saving the DLLs so you don’t have to ask about it each time:
http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html
You might also use the AIO210 program to add them as detailed in this YouTube video—maybe this is a more permanent fix, but since the files are from media-fire be very careful about what you do so as not to install a virus on your computer.
I’d scan the downloaded ZIP you download with whatever virus and internet security software you have and don’t be fooled by extraneous popups you might see during the download process. I was able to download the aio210.zip after authorizing one Captcha window and closed at least one bogus popup trying to get me to install other software. I also scanned the downloaded zip with two virus scanners and both said it was clean. Here is the YouTube video, where the link to the ZIP to download is in the description once you expand it:
https://www.youtube.com/watch?v=vlT0N2CX50g

Lenovo System Update 5.03 on T430u doesn't report software updates

On my T430u Lenovo System Update 5.03 running on windows 8.1doen't find any update even though updates are available. More technical details about the problem are reported in my previous thread.
I'm really pleased if someone can help me.
Thanks,
Denis.
Solved!
Go to Solution.

Hi Mithun,
The problem still persist.
I've just reinstalled all components:
- .NET Framework 3.5 SP1
- Lenovo System Update 5.03.008 (systemupdate503-2013-10-31.exe)
- Related Patch "Patch module for Lenovo System Update" (sushortcutfix01.exe)
- Executing DesktopToastsForCriticalUpdates (look at the screenshot) it reports available updates
- Executing Lenovo System Update it doesn't report any updates to install.
In logs directory of Lenovo System Update installation directory (C:\Program Files (x86)\Lenovo\System Update\logs) I can extract the same error:
Info   2014-01-20 , 12.04.56
   in Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
   Message: The UDF will be downloaded from: https://download.lenovo.com/ibmdl/pub/pc/pccbbs/agent/SSClientCommon/HelloLevel_9_08_00.xml
Info   2014-01-20 , 12.04.56
   in Tvsu.Engine.Process.HelloProcess.DownloadUDF(String helloClientLevel)
   Message: The UDF will be downloaded to-> C:\ProgramData\Lenovo\SystemUpdate\session\system\SSClientCommon\HelloLevel_9_08_00.xml
Info   2014-01-20 , 12.04.56
   in Tvsukernel.CustomControls.Step.<>c__DisplayClass7.<set_Image>b__6()
   Message: Setting PROCESSING status.
Severe   2014-01-20 , 12.04.56
   in Tvsu.Engine.Process.HelloProcess.Start()
   Message: Error reading C:\ProgramData\Lenovo\SystemUpdate\session\system\SSClientCommon\HelloLevel_9_08_00.xml, this XML file is not well-formed
   Exception:
       Message: Elemento radice mancante.
       Type: System.Xml.XmlException
           in System.Xml.XmlTextReaderImpl.Throw(Exception e)
   in System.Xml.XmlTextReaderImpl.ParseDocumentContent()
   in System.Xml.XmlTextReaderImpl.Read()
   in System.Xml.XPath.XPathDocument.LoadFromReader(XmlReader reader, XmlSpace space)
   in System.Xml.XPath.XPathDocument..ctor(TextReader textReader)
   in Tvsu.Engine.Process.HelloProcess.ParseUDF(String udfPath)
   in Tvsu.Engine.Process.HelloProcess.Start()
- The File: C:\ProgramData\Lenovo\SystemUpdate\session\system\SSClientCommon\HelloLevel_9_08_00.xml
it's an empty file (0 KB).
Can you help me?
Is there a place where I can attach all log files ?
Best regards,
Denis.

Lost document on my new MAC because I accidentally saved on another account that I had no permission to save to..now I don't know where the doc is but I just know its somewhere on the computer..maybe the temp files or something?!sos! please help me!!

I saved a document, while logged in as a Guest, to another user account [it was set up for some reason to save like that (I guess the person who used computer last did that) and I didn't check before "saving"] on accident. Of course I didn't have permission to save on the other user's account but I was in a rush and so I figured everything was fine but later I found that there was a message warning me saying it did not save because it couldn't save because I had no permission to save on that account and gave me the option to duplicate or cancel.. I wasn't paying attention so I can't remember which button I hit but clearly it wasn't "duplicate"
I took hours perfecting this document and now I can't find it.. anywhere!
Where do these types of things go when this happens.. I know it's somewhere on the computer but where?? SOS I need the doc and I'm hoping I can find it
I guess it's the same as someone who accidnetly hits "don't save"... question still stands.. please anyone help me!!!
I'm trying to use Disk Drill but I only found things from November and it seems like it only shows files that have been physically/manually deleted..and my TIME MACHINE WAS NOT SET UP..because we recently got this MAC computer and had no clue what it was
maybe its in some temp files somewhere..where do not saved documents go.. i know that it is probably writable but I know that is probably still exists
ANYONE WITH INFO PLEASE PLEASE HELP!!

tis true
I know, I always do that but I was in a rush to get somewhere and I was relying on my thousand dollar Mac to do some kind of recovery or something. I know Microsoft always keeps temporary files (I think Mac does too, part of me asking here in this forum was for someone to tell me where I can find those files) and when you go to open Office Works then it gives you the option of opening the last recent documents, saved or not saved.
I usually copy paste into my emial just in case something goes wrong with the created document but I just didn't have the time to login and do all that My loss, you live and you learn, BUT still if ANYONE got any info on this, PLEASE DO CHIME IN *keeping the hope alive*

Open POs for per SOs

Hi All,
How can we open POs for per SOs?
We want open 1 PO concerning all the items in 1 SO..
So we will try to pack POs seperately for 1 customer.
Thanks
Regards
Siva

Siva,
Please remember that a single PO is procured from only one vendor. It is a rare event when all items in a single SO can be procured from one vendor, and would thereby qualify for inclusion in a single PO..
You may manually create POs with as many items as you wish. Once you have determined the materials/qtys you wish to purchase to support a particular SO, just manually enter them all into a single PO.
Best Regards,
DB49

T430u hangs after upgrading to Windows 8.1

Hi, after upgrading to Windows 8.1 my Lenovo T430u started to freeze on some applications (specially ms Excel 2013). Sometimes the network connection was lost.
I did a clean install of Windows 8.0 and after downloading and reinstalling all drivers everything was working perfectly. Until I upgraded to Windows 8.1 again.
Now I'm having the exact same issues than I had when I first upgraded to Windows 8.1. I have installed all OS patches as suggested by Windows Update.
Is there any Windows 8.1 OS image that I can download from Lenovo that is tested for my machine? Or should I go back and reinstall Windows 8.0 and live with it?
Thanks
Adrián

I have the same problem - my data had better not be gone! Why won't Apple address this problem?

How do i close the welcome to iMovie screen? Clicking on red button in upper left does nothing. SOS! Thanks!

How do I close the "Welcome to iMovie" screen? Clicking on the red button in the upper left does nothing. SOS! Thanks!

"Continue" was hidden at the bottom of the welcome screen because my display was changed. Some days I'm smarter than others. Or.... :-)

SOS: JSON and internet explorer

hi -- I posted the following a few days ago:
JSON error in internet explorer 8 -- works fine in Firefox
I haven't heard anything back yet from the forum, so thought I'd send out another SOS.
I filed an SR, but this is outside the realm of Oracle Support's expertise.
Anyone had trouble w/ JSON and IE?
Thanks,
Carol

See this page.. (Look for area under native json obkject) [http://blogs.msdn.com/ie/archive/2009/03/12/site-compatibility-and-ie8.aspx] it's possible you are getting hit with this issue..
Thank you,
Tony Miller
Webster, TX

SOS only, No Service and searching for network

Need help!! Very little beer spilled on my iPhone 4 where the speaker and front camera is and was wiped try immediately. It was still working fine after the incident for a few days however, suddenly the iPhone started playing up and losing reception and now its started showing SOS only then it says No Service and switches back and forth from No Service to searching.
I've tried...
Turing on/off airplane mode
Taking SIM out then putting it back in
Putting another SIM in iPhone both Telstra SIM and Optus
Putting iphone in container of rice for hours
Restore network settings
Hard reset iphone (holding sleep/home key)
Updating iTunes version
Sync -> back up iPhone -> restore iphone -> sync and back up iPhone from previous back up's -> restore back up again just to be on the safe side but there's no change and keeps switching from No Service to searching.
Telstra is not sure whats wrong and has advised to take it to Apple or Telstra store for assessment and sent of to get fixed.
Does anyone know why this is happening or what I can do to fix it without having to fork out money if possible as not covered by warranty anymore.

Disregard this post, I have resolved my issue, thank you

T430U not booting - blank screen or never gets passed splash screen

System specs:
Lenovo T430U
Intel i5-3427U
8GB PC3-12800 DDR3-1600MHz SoDIMM Memory
HDD 500G 7200rpm Toshiba
mSATA 24GB Samsung Cache
Win 8 Pro, upgraded to 8.1
I rarely use this machine but a couple of months ago I went to boot it up and found that I was not able to get past the Windows splash screen. Sometimes I don't even get the Windows splash screen, I just get a black screen. Rarely I get a Windows screen saying that it is diagnosing a system problem or something to that effect and I can even get to where it will allow me to do some Windows diagnostics but nothing ever comes of it and the process is extremely slow.
I called Lenovo, but of course my machine is out of waranty so the tech just gave me a few pointers and said I could send it in to the depo but the potential repair cost could range up to about 75% of what I paid for the machine in the first place. Anyways, after having me try a few things in the BIOS he suggested that it was likely the hard drive. I mistakenly thought from the time that I bought this machine that the OS was installed on the 24 GB SSD so I ordered a new SSD and swapped it in. This made no difference at all as I have now learned that the mSATA SSD drive is merely for cache to speed up booting.
I am afraid that this means the main HDD is at fault, and quite frankly, if I replace it I am going to do a fresh install of Windows 7. But I do have pictures and docs that I would like to salvage if possible. Any ideas on what might be going on here?
Solved!
Go to Solution.

Install this on the computer that you are going to hook up the hard drive to: https://www.piriform.com/recuva
I've had pretty good luck with it in getting files off of dying hard drives. Wrap the hard drive in a small towel and put it in the freezer for a half an hour, then take it out and hook it up and run recuva right away. You might get lucky.
It sounds funny but I've had it work more than once.
Regards,
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

SOS Only - cannot connect to network

My phone now only shows "SOS Only". I've been reading many threads related to this issue, and tried lots of methods to solve the problem, but so far no luck.
Details:
iPhone 4
iOS 5.0.1
iTunes 10.5.2
Carrier: Virgin Mobile 11.0 (Australia)
phone was bought outright (unlocked), and the SIM is also unlocked
A bit of history: I bought the phone from apple, and used an australian SIM card (pre paid - virgin) for a while. In July I moved to singapore, got a new SIM/number, and in the process of living there lost my original aussie SIM. Yesterday I returned to australia and went to the Virgin store to ask for a new SIM with the same number (that I had before I left australia). They did this for me no problem, and the new SIM gave the message "SOS Only". The bloke at the shop said it would find the network in about 30 minutes. I went back 2 hours later, still no change. They said that because it was jsut after xmas, lots of people were connecting new numbers, and that I should wait 24 hours.
Today I went to the shop again, and they tried a few things with their tech support. They tried it again with a new new SIM and still the SOS Only remained. Their suggestion was that the phone needed to be synced with my computer, so I went home.
Synced the phone and it said "there is an update avaliable for your carrier settings" and I assumed that this would solve the problem. I updated, synced again, and the same "carrier settings" message came up. It repeatedly came up each time I plugged it in or restarted the phone, but the SOS Only message remains. It seems that the carrier settings are not actually being updated
I have been reading related threads and tried the following:
restarting the phone
turning on/off airplane mode, 3G, mobile data, wifi, roaming,
resetting network settings
hard rebooting the phone
restoring from backup (12 months ago)
restoring from backup (2 hours ago)
turning off, removing SIM, inserting and turning on
Searching for carriers manually (Virgin does not show up, but i am sure their network is online)
I've reinserted my singapore SIM and it works fine
Note: I have been overseas and not used my australian number for FIVE months. The guy at the store assured me that only after 6 months does the number "disappear" and that shouldnt be the problem.
HELP! This is so frustrating and I don't know why it is happening. I think it is a problem with the "carrier settings". I think tomorrow I might go back to the shop and get another SIM with a different phone number. After that, I may go to the apple store and get help from a "genius".
Any suggestions or if you want any more info please reply, and thank you so much in advance!!!

I am havign the same problem, i sent my phone away through NextByte in Mackay Queensland for a cracked screen, when i recieved it back today, the sim card wont pick up carriers or any signal. I searched for a bit last night, apparently there is soemthing inside the phone which could be damaged. And after reeading further on, i read that once it is damaged, the phone cannot be repaired. my phone also says searching.... the i search for carriers manually (Telstra does not show up, but i i call called them and their network is online)
....so i dont really know if this was any help, but you could try getting a sim replacement? which is what i have been told to do

T430u and Windows 8 Problems

Hi everyone,
Really need some helps here. I bought a T430u , and to be honest, i'm rather dissapointed with this. My keyboard was dead in a matter of weeks, so i've just get it back from the sevice centre. And now I have another problems:
1.Cannot wake up from sleep
I've read on another sites that I have to disable expresscache and quick start, but then it'll make the ssd caching useless isn't it? And yet after I uninstall expresscache and disabled quick start, it still doesn't solve my problem. Now it'll wake from sleep but will crash and restart.
2.Glitchy trackpad
On some occassion, the trackpad just stop working for 1 - 5 minutes. And then it'll work again. Now I mainly use mouse, but seriously...
I've upgraded all the lenovo driver and windows update too. But it doesn't solve anything...

Hi centraldogma,
Welcome to Lenovo Community. I'm assuming that the system is still under warranty. I would suggest calling Tech Support to see if they can help you troubleshoot the problems. If that doesn't help perhaps they can advise about the last option of returning the system.
ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
Microsoft MVP - Consumer Security
SpywareHammer

Why does my MacBook Pro mid 2010 sound a SOS signal on start-up?

Since last month our MBP mid 2010 started to have boot issues. Sometimes it boots fine 10 times, other times it will take time and patience before you get through the SOS signals. After it is finally started, it will work perfectly and also putting it to sleep gives no problems. Only when you restart or shutdown the machine and start again it might fail, but it is random.
We have been to Apple Store Amsterdam, but according to their tests, the memory was fine. Also the RAM was reseated and other RAM was used, but the problem persists. This rules out a faulty memory I think. What we didn't do is only use one of the two slots, since I am not sure the system will run normally then.
I am afraid this is a logic board issue if I am not mistaken, but (of course) I hope it can also be something else. Are there any other tests that we could do?

Hey Alomolife,
I also still have no clue. At this point I notice that the MBP gets very cold over night and it does not start. If I heat it up by using a hairdryer or the oven, it will start up. So basically I can only restart it when I have tropical temperatures in the house.. Maybe the mechanical part of the hard drive does not work properly in the cold. This way of working is of course not something I would like to keep doing. How did you get your machine started again?

Issue in BPS Variables....Please anybody reply...this is really urgent(SOS)

<b>Hi dear friends, This is really a urgent problem and crucial Please anybody can share their ideas or atleast some inputs/ clues to clear the cobwebs in my understanding.</b>
I am facing problem in BPS Variables.
I created the variables 1.zqbs- employee responsible --->Userentry/default value.
2. zconpar-- contact partner----
> Replacement type is user exit(Function Module)
3. zconpar-- contact partner----
> Replacement type is user exit(Function Module)
ZCONPAR: I am using the zqbs, planing area, characterstic name as a import parameters and i am exporting the output value to 0BP_ACTIVIT through zconpar
ZCONPER: I am using the zqbs, planing area, characterstic name as a import parameters and i am exporting the output value to 0BP_CONTPER through the zconper.
These two variable info objects are calling in the planning layout lead column.
based on contact partner it should display contact persons for the contact persons we are applying the conditions(bp_reltype = bur001,bp_reldir = 2) to filter the contact persons.
In my case i am getting 3 values for the contact partner like 1000, 2000, 3000.
i am getting 2 values for the contact persons if i run the variables individual.
note: if i run BPS0 its going into loop and displaying multiple data means for 1 contact partner its applying all contact persons. at final it showing records like contact persons X contact partners means it showing more unvalid records.
how to avoid this situation.
contact partner contact person bp_reltype bp_reldir
1000 xxxx bur001 2
2000 yyy bur002 2
3000 zzz bur001 2
it should display like this
1000 xxx
2000
3000 yyy
but it showing
1000 xxx
1000 yyy
1000 zzz
2000 xxx
2000 yyy
2000 zzz
3000 xxx
3000 yyy
3000 zzz
Please anybody who have even a vague idea of solution can respond to this immediately.----SOS----
Even your smallest hint is greatly appreciated.
Yours truly,
your friend Bharath.

Thanks for the reply and I would trying these consistency check out again as a background job but I have already done these checks and have not been able to find any inconsistencies in the planning area or the master planning object structure. the problem is this as I have put in the SAP message:
"We have generated CVCs from a text file using the load work list functionality Due to some internal formatting issues few erroneous CVC were generated. On going through the concerned notes we have come to the conclusion that we would have to delete the erroneous CVC and recreate new CVC.
The issue that we are facing is that we are not being able to delete the erroneous CVC from the MPOS as they are not visible in the display mode. On other hand we do see the erroneous CVC in the planning book, which is not at all understandable because if there are no CVC then why are we seeing them in the planning book."
Please let me know if this is a problem that has been faced by anybody in SCM 5.0
Thanks

I would like to know about technical details of new ThinkPads T430u and X1 hybrid.

I am interested in T430u and X1 hybrid. I would like to know the difference of both product. If I looking for the thin, light, durable, high-performance, and long-life battery laptop, which one should be suitable for me?

T430u is a new ultrabook that is coming out maybe middle of the year using the ULV Intel Sandy Bridge processor.
X1 hybrid is based on the current X1 ThinkPad but with additional ARM processor for the Android OS.
X1 hybrid on Windows will give you about 4 hours of battery time, the T430u should be about 7 hours, but its processor is slightly slower.
Maybe you should look at the X230 instead.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

SOS T430u

Similar Messages

Maybe you are looking for