Sound problems! help please

My right earbud has not been working for several days, I checked the earbuds and they work-so I know for sure thats not the problem. I just finished restoring it and the right side still doesn't work. I have no idea what to do now, help please! Thanks

Oh dear i have heard this one before its not good news what has happened it when you plug your earphones into iPod the earphones must obviously touch all connectors and what can happen to the odd person out is the tip of your earphones,
(The right ear) can push the ipod jack connector forward so now the tip cant reach the connector, yet the bottom and middle connectors cant be pushed in because they are on the side, not the end, this is something you need to take up with apple support if your iPod is still under warrenty

Similar Messages

NO SOUND PROBLEM HELP PLEASE!

i have a lenovo g580 and it has been owrking fine since i got it (christmas) until a week ago.
I turned on my laptop in the morning and i message pops up saying that it cannot connect to the dolby advanced audio driver, reinstall it if the problem persists. but startup sounds and youtube sounds would play, nothing else. so i turn it on the next day to fix it and there is no sound AT ALL. so i hover over the sound icon and it says no audio output device is installed. so i try to fix it day after day. then yesterday i turn it on and reinstall some drivers and stuff and now it says no headphones or speakers are plugged in and under playback devices, my speakers dont show up.
-Lenovo G580
64 bit operating system
windows 7
8GB RAM
someone please help

hi FunnyMar5ian,
Welcome to Lenovo Community Forums!
Here,
Make sure to un-install the Audio driver first under Device Manager
   > Open device Manager
   > Go to sound, video and game controllers
   > Look for Realtek High Definition Audio or High Definition Audio
   > Right click on it and select uninstall put a check on Delete the driver software for this device
Check you Control Panel / Programs and feature / Uninstall a program list for any Realtek Audio and Dolby Advanced audio.
Uninstall both
If non then just proceed to the next step,
Download and install this first
Realtek Audio Driver
0lau07ww.exe
187MB
After installation go to
Your Drive "C:" under My Computer then go to
               /Drivers
               /Realtek Audio Driver
               /PCEE4
               /DolbyAdvancedAudio.msi
Install the DolbyAdvancedAudio.msi.
Then Restart your computer and Check your sound.
Hope this helps,
Cheers!!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

X-FI Elite Pro sound problems HELP PLEASE !!!!!!!

Message Edited by Nemurytorul on 04-0-20070:43 AM

I have tried several different power connections. Now I have connected a cable directly from the power supply unit.
Another problem that I have is that different games freezes my system after a while. I have tried World of warcraft and Guild wars and they both freeze after 5 to 60 minutes.
I had Audigy ZS 2 before without any problems at all and did a clean install with the new card.
The card is at IRQ 20.
I have a ATI Radeon X800 to. Is that the problem ?
Any suggestions ?
Message Edited by Mike_B on 0-3-2005 02:03 PM

ICloud problems help please!

I have an iPhone 6 and during the setup I must have did something wrong and now I have my old iCloud account on it that I no longer remember the password, security questions, and no longer have the email address to that account. I think I was hacked and my password and security questions changed. I want to log out of iCloud and start using my current iCloud account. I know these are security measures, but how can I get logged out??? My iPhone is having problems since the latest update and now I can't make a call or text. I can't call apple support without a working number HELP Please.

Hello shelbyrecords,
Oh no! That sounds really frustrating. Unfortunately, if iCloud Find my iPhone Activation Lock is enabled on the device we’ll need to gain access to your previous Apple ID account to disable it. Based on the information you have provided, it sounds like you may need a personalized support experience to recover your previous Apple ID:
If you forgot your Apple ID password - Apple Support
http://support.apple.com/en-us/HT201487
Make sure that you’re entering the correct Apple ID. In most cases, your Apple ID is also the primary email address of your Apple ID account. If these steps didn't help you change your password, contact Apple Support.
Thanks,
Matt M.

VIRUS PROBLEMS, HELP PLEASE???

I continue to have messages popping up saying my computer is infected. It wants me to cleanup and I have to register with Mac Shield 2.6. Pronograhic websites keep popping up. Anyone having this problem? Did not have this problem yesterday, but it's here today! There is also a Red Sheild on the top of the toolbar where it shows the time, battery life, etc. Right clicking on the sheild drops down Scan Now, Cleanup, Control Center, Scan, System Info, Settings, About, and Register. A pron site just popped up again! Need help Please!!

Fuony wrote:
The Mac Shield malware can come through Firefox too if you allow it to and you click on it!
Your exactly right, it is possible that if you visit a site and need the scripts to run for something that the malware that uses Javascript is on that site, then your going to be presented with it.
The thing is with the Firefox + NoScript combination defeats alot of the web side trickery the malware authors are using to get the malware to appear in the first place.
Also this "MacDefender" isn't the only malware making the rounds. There are some serious Flash vulnerabilities being hosted on hostile/adult websites that are running scripts for no apparent reason other than to try to infect your machine.
By running all scripts all the time, your computer is in a state as if you tried running across a busy highway blindfolded.
As a lifelong "MacHead" I can understand Apple loyalty, but if Apple isn't cutting the mustard on their browser security, rather place their users security at serious risk for the sake of convenience, then I have to think about using and recommending to others something else that is more secure.
As a example, I surf thousands of web pages a day, some on really nasty sites, yet I haven't seen this "MacDefender" appear on my computer. Even when I purposely visited links that people have submitted that had the malware. (I maintain a couple of bootable clones of my boot drive just in case)

Soundtrack problems - help please

Help please. I tried doing a send to multi-track project from FCP with the base layer video option and kept getting the 'error sending selection to Soundtrack Pro' message. I did a search and the suggestion is that I have no disk space but I have over 600GB!
Then I tried a send with the full video and the file saved okay. However when I try to open the .stmp file, Soundtrack Pro starts and then freezes. I've tried opening in various ways.
Help please, I just cannot figure this out! What am I doing wrong?

Not sure how much help this is, but since you're having problems with the layout, did you try deleting the layout file? MacintoshHD/users/username/Library/Application Support/Soundtrack Pro/Layouts
BTW, I found a BKiLifeConfiguration.plist in the following path:
MacintoshHD > Library > Application Support > ProApps > Internal Plug-ins > BrowserKit > iLife.bkplugin > Contents > Resources
Do you find it there?

SQL INSERT problem - help please

Hello,
I'm having a problem with INSERT statement.
There is a "ShowFinal.jsp" page, which is a list of candidates who selected from the second
interview. The user picked some candidates from the list and conduct the 3rd interview. After
he check suitable candidates(who are selected from the 3rd interview) from the list , enter
basic salary for every selected candidate, enter date of interview and finally submit the form.
These data should be save into these tables.
FinalSelect(nicNo,date)
EmpSalary(nicNo,basicSal)
In this "ShowFinal.jsp" page, it validates the following conditions using JavaScript.
1) If the user submit the form without checking at least one checkbox, then the system should be
display an alert message ("Please select at least one candidate").
2) If the user submit the form without entering the basic salary of that candidate which was
checked, then the system should be display an alert message ("Please enter basic salary").
These are working well. But my problem is how to wrote the "AddNewFinal.jsp" page to save these
data into the db.
Here is my code which I have wrote. But it points an error.
"AddNewFinal.jsp"
String interviewDate = request.getParameter("date");
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");
String sql ="INSERT INTO finalselect (nicNo,date) VALUES(?,?)";
String sql2 ="INSERT INTO EmpSalary (nicNo,basicSal) VALUES(?,?)";
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2 = connection.prepareStatement(sql2);
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1 = connection.prepareStatement(sql);
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
Here is the code for "ShowFinal.jsp".
<form name="ShowFinal" method="POST" action="AddNewFinal.jsp" onsubmit="return checkEmpty() &&
ValidateDate();">
<%-- Loop through the list and print each item --%>
<%
     int iCounter = 0; //counter for incremental value
     while (igroups.hasNext()) {
          Selection s = (Selection) igroups.next();
          iCounter+=1; //increment
%>
<tr>
     <td style="background-color:ivory" noWrap width="20">
     <input type="checkbox" name="<%= "ChkNicno" + iCounter %>"
value="<%=s.getNicno()%>"></td>
        <td style="background-color:ivory" noWrap width="39">
             <%= s.getNicno() %> </td>
     <td style="background-color:ivory" noWrap width="174">
          <input type="text" name="<%= "basicSal" + iCounter %>" size="10"> </td>
</tr>
<%
%>
Date of interview<input type="text" name="date" size="17"></td>
<input type="submit" value="APPROVE CANDIDATE" name="B1" style="border: 1px solid #0000FF">
</form>........................................................
Here is the error generated by TOMCAT.
root cause
java.lang.NullPointerException
     at org.apache.jsp.AddNewFinal_jsp._jspService(AddNewFinal_jsp.java:70)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
I have goto the file "AddNewFinal_jsp.java". The line 70 points to the following line.
for(int i=0; i < value.length; i++){ [/b]
Please can someone help me to solve this problem? Please help me to do this task.
Thanks.

Hi Casabianca ,
It is clearly that your problem is not on the database end, more like a servlet/jsp issue.
I will not comment on the javascript portion, but rather the 2 jsps.
a simple way to trace what's go wrong is to check the final result (the html code) of the first jsp (showFinal.jsp), and compare against what is expected by the 2nd jsp (AddNewFinal.jsp). Most browser do provide "view source" on the page visited.
the following code
<input type="checkbox" name="<%= "ChkNicno" + iCounter %>" value="<%=s.getNicno() %>">
<input type="text" name="<%= "basicSal" + iCounter %>"
would likely to be "translated" to html code something as follow:
<input type="checkbox" name=""ChkNicno0" value="nicNo>">
<input type="text" name="basicSal0">
the original code in "AddNewFinal.jsp" using
request.getParameterValues("ChkNicno");
which looking for a none exist http request parameter (sent as "ChkNicno0",etc but look for "ChkNicno"), which has explained before.
the second attempt to use String[] value = request.getParameterValues("ChkNicno" + iCounter); give Cannot resolove symbol :iCounter. because iCounter never defined in the 2nd jsp!
Most of the error message do give clue to cause of error... : )
not too sure on your intension, assume you wish to update only those selected (checked) row to db.
some suggestions:
1) <input type="text" name="ChkNicno" size="10"> </td>...
<input type="text" name="basicSal" size="10"> instead.
then use javascript to based on checked element index (refer to javascript spec for more details), for those index not checked, clear off the correspond index "basicSal" field value.
e.g. ChkNicno[1] is not checked, empty basicSal[1] value before submission.
This will give us only selected rows values.
2) retain the code
String[] value = request.getParameterValues("ChkNicno");
String[] bs = request.getParameterValues("basicSal");at 2nd jsp, as now the http request will pass parameters using "ChkNicno" and "basicSal".
3) some change to the code for optimization
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2 = connection.prepareStatement(sql2);
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1 = connection.prepareStatement(sql);
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
to
pstmt1 = connection.prepareStatement(sql);
pstmt2 = connection.prepareStatement(sql2);
for(int i=0; i < value.length; i++){
     String temp = value;
     for(int x=0; x < bs.length; x++){
          String basic = bs[x];
          pstmt2.setString(1, temp);
          pstmt2.setString(2, basic);
          int RowCount1= pstmt2.executeUpdate();
     pstmt1.setString(1, temp);
     pstmt1.setString(2, interviewDate);
     int RowCount= pstmt1.executeUpdate();
preparestatement created once should be sufficient as we do not change the sql statement throughout the loop.
there are better solutions out there, this just some ideas and suggestions.Do try out if you wish.
Hope it helps. : )

Sound problem. help me pls

Help me pls i have hp pavilion dv 7 1125ea and i dont find my driver. Itry lick this.
1.install MS UAA
2.install IDT audio driver but this driver give me this error... the hardware detected is not supported by this idt software package. the install will be aborted....pls help me and sorry for bad english
I need for windows XP. Ty

Ordered system restore cd's. Restored back to factory settings. My sound problem is fixed. I hope this helps you out.

Multiselect problem Help please!!

Hi all,
I am currently using Application Express 3.1.2.00.02 I have developed an online questionnaire with a multiselect list for one of the questions. The problem i am having is that i need each choice to be totaled up separately on the report generated.
My table of answers looks like this:
Column name e.g. (Question 9)
Answer "Dog" "Cat" "Mouse" "Snake" (underneath column name Question 9 depending on what is selected).
The reporting page would look like below:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
and for the question you could have another respondent who chooses similar of items on the multiselect, so their answer looks like this:
Answer
"Question 9" Dog
"Question 9" Snake
This would then start a new row on the reporting page like below which is not what i want:
*(Column Question 9)* Count
Dog 1
Mouse 1
Snake 1
Dog: Snake 1
But the report should look like this:
*(Column Question 9)* Count
Dog 2
Mouse 1
Snake 2
The current SQLquery i am using is below:
select "QUESTION 9",
count(*) c
from "P1 DQUESTIONNAIRE"
group by "QUESTION 9"
Thanks for your help and suggestions,
'S'

How to make sure your forum post will never be answered:
1) Make sure your subject line is completely meaningless (i.e. HELP PLEASE!) and describes no part of your actual problem
2) State that you are having "a few problems" but make sure to offer no details whatsoever what those problems are or what the symptoms are.
3) Post large volumes of code instead of distilling the problem down to a compact snippet
4) For extra points, make the code hard to read by refusing to make use of the "code" tag.

K8N Neo2-fx Ram problem Help please

I have three ram(2x512MB single sided , 1x1GB double sided). Is there any way I can put them all on the motherboard? When I place them all the computer is not starting and it`s making a "beep" every 2-3 seconds. If i connect the 1GB double sided on the Dimm1(green) and the one 512MB single sided on the Dimm3(green) it`s working properly. Is there any way I can use all my ram at the same time. I`m desperate. Help please... thank you

Quote from: wodahS on 09-November-06, 05:55:17
How can I put my computer facts under any post I am posting? I should make it my signature?
That's the rule mate which you need to gives all your component in details including your PSU and Bios revision so that others can help you! Like what BOSSKILLER say it won't works with 3 DIMMS unless you purhased another 1 GB of RAM then it can solve your problem with 4 DIMMS or else with 2*512MB RAM. Make sure that you've lowered your HT to <=800Mhz as default is 1000Mhz. GD luck.

IPhone sound problem. Please help!!!!

Early this morning my iPhone's sound stopped working, it will work for a short period of time and then stop again. I would also like to specify that its not my ringer it is my in app music, music, and the keyboard/lock sounds do not work. Does anyone know how to fix my
problem without having to restore or getting a new phone?

If I go into an app or try to listen to music with the built in speaker it won't work but it will work with headphones, it will work when I recieve a call or a text but any other sound sent mail it will either not do anything or vibrate

The sound on my iPhone isn't working I tried putting headphones in and it worked, but as soon as I take th out and the sound countinues playing the sound stops help please

The sound on my iPhone isn't working I don't understand why it was working fine an hour ago I haven't dropped it or anything simply just out it on silent... The music I was trying to listen to didn't want to make a sound when I turned it in , I put a pair of headphones in and and it worked as soon as I took it off it completely stopped the music was playing still I could see it in the top column that the play button was on ... Then I made a call an the same thing happened I turned it on speaker and then I could hear them... The sound is completely off even tho i looked at the seettings and put the volume on high noting is sounding on its own not even when i tap the buttons... I took it off the silent before I tried this stuff I don't understand please help !!!

make sure that your head phones are not attached to the phone then use the volume buttons on the side, if when using them you see a pic of headphones on the screen, then you have some lint in the headphone jack, use some compressed air and blow it out.
If you dont see that then try to reset the phone, hold down the home and power buttons for 20 seconds or untill you see the silver apple.
If you are still having a problem restore the phone and set up as new to see if that clears it up.
http://support.apple.com/kb/ht1414

Sound Problem - help

Hello I have Compaq CQ58 notebook. Yesterday, I tired to plug my headphones into my notebook and suddenly noise quality decreased. Also, there was a burning smell emitting out of my notebook. Please advice -- what might be the problem and how much it will cost to fix it. Today, I turned back on my computer and internet is working. But sound quality is still bad (with and without headphones plug in).

Sam,
Welcome to the HP Forum.
The ghost of my teenage past would say, "Wow! Bummer!"
Computers are not supposed to burn, emit burning smells, smoke, emit sparks... You get the picture.
You might take that notebook to a qualified tech and have it looked at to determine what happened and what it will take to get it fixed. Long distance diagnosis is not an option.
Frankly, if any of my notebooks emitted a smell of something burning, I would turn off the unit and not use it until I had it apart to see what happened to the inside.
HP 2000 Notebook PC Compaq Presario CQ58 Notebook PC Compaq Presario CQ58 Notebook PC Maintenance an...
You can call HP and ask about this -- there is a charge for repairs not made under warranty, of course.
Worldwide Support Portal
Contact HP – USA - Phone Assistance
Warranty Required – USA and Canada
USA – Contact HP // Self-Help – Email - Chat
Click the Kudos Star!
It is a nice way to say “Thank You” for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

New 3510nr sound problem help!!

I bought a new 3510nr through best buys and I bought it for its fast performance and excellent screen.I am having a problem with quieter sound through the speaker when paying a movie on the DVD drive using media player or the onboard hp software. The sound from a music file is fine and plenty loud and so are video clips in yahoo or any other software source.I hope some one canhelp with this as Im scared to go around with HP consumer service. Has any other users had this problem. I repeat the speaker volume is fine on all sources except the DVD player, and in control panel all volume adjustments are on full. In addition to this my video files moved from xp to vista 64 dont show up but play as AVI's. Is there something I have to upload to play all my video clips that formally played in xp. I dont want to return this laptop to best buys...can someone please help or am I in for the run around?????

Quote
Originally posted by Del UK
If you are using both MEM slots, take one out and you should have no further problems......
Del
Hey Del,
Thanks for the tip, however, I am using just one stick of DDR RAM and only taking up one MEM slot and I am still unable to get anything to post
As we have exchanged the 848P motherboard twice and increased the PSU from 450W to 500W ensuring that all the minimum AMP requirements have been met, (particularly for +12V rail), without success, the memory is next. We have literally upgraded everything else except the case and still nothing posts
The next step we are going to try is a different brand of memory. As indicated in other forums, it seems that the 848P motherboard performance is more or less volatile/compatble depending on the brand and perhaps the CL of the memory being used. Perhaps changing from Corsair ValueSelect VS512MB400 to a Kingston will at least allow the BIOS to post. ...one can only hope
Depending on the cost of the memory, I will hopefully be able to post the results of my attempts with the Kingston hopefully soon
Thanks again for all your help!

Audio Going out of sync problem, Help Please

Hey all.
So I have just filmed about 3 hours worth of gaming videos using XSplit recorder,
in a mp4 format, and when I played it back using VLC it all seemed fine.
However I went to import it into premiere to start editing it I noticed the sound was completly out.
I have recorded some audio and video times listed below to show the sync times and how they are out.
Video Audio
00:41:24 - 00:44:09
47:46:25 - 50:11:12
As you can see it gets worse over time.
I could manualy do a time shift on the audio to align it but thats a lot of work as I have multiple clips to edit and would like a proper fix for it
I did some quick research and found one fix was to make the sequence settings the same as the video file, but that didnt work for me.
also trying to conform the video file also didnt help me out.
Anyone have any other ideas?
Thanks In Advance
Thomas

>gaming videos using XSplit recorder
That is a new one to me, but other messages concering screen capture software discusses LOTS of editing problems
Some examples... (may or may not help, but at least some ideas based on other problems)
These are for Premiere Elements, but may help with PPro
Fraps & Elements http://forums.adobe.com/thread/871095
-and more Elements http://forums.adobe.com/thread/943772
-and yet more Elements http://forums.adobe.com/thread/967201
Camtasia http://forums.adobe.com/thread/836800
-and http://forums.adobe.com/thread/775288
-and http://forums.adobe.com/thread/453044
-and http://forums.adobe.com/message/3202148
Techsmith codec http://forums.adobe.com/message/3692768
-and http://forums.adobe.com/thread/1046914?tstart=0
BB Flashback http://forums.adobe.com/thread/1074014

Shockwave Player 11 - Problem HELP PLEASE!!

I have upgraded to Shockwave Player 11 but I am having big
problems. I have installed it but when going on a Shockwave
supported sites ie; iSketch, it comes up in a white-box with a
message ''Adobe Shockwave Player is now installing.'' ''Installing
compatibility components.'' with a white bar below which is
supposed to fill up but doesnt. Screenshot on Link below. I have
been trying it both on IE7 & Firefox, tried both semi and full
installer but no luck. Please help?
http://i7.photobucket.com/albums/y295/ldndude/others/ShockwaveFlash11Problem.jpg

quote:
This worked for me. It will actually let me access the game,
but it is unplayable. The drawings are all just random lines. When
I draw people see this problem, it looks like I am just drawing
random lines on the canvas.
I'm glad 4 helping u.4 me all the games r playable.But the
new ones like....
http://www.miniclip.com/games/power-boat/en/
or
http://www.miniclip.com/games/rally-championship/en/
r very slow.

Sound problems! help please

Similar Messages

Maybe you are looking for