Source system info in the transformation

Hi,
How to get the source system information in the transformation or start routines? Is there FM or field which tells what source system the datasource is assigned to in the transformations ?
Regards,
Kalyan

Hi,
U will get the value of the source system from which the data is loading in p_r_request->get_logsys( ) inside the transformation.
Hope it helps.
Regards,
Rathy

Similar Messages

"Conversion of Source System names after the transport" : O

Experts:
Environment : BI 7.0 and SP 12
Tranports related to transformation rules are failing with inactive status...
Further investigation on this, I have noticed that in our QA system, where "Conversion of Source System names after the transport" : O screen, we have columns
Original Source System, Target Source System, 7.0, Description(I guess, since no name is found)
Everything looks fine to me with reference to actual techinical names of source/target system...
My question there is a check box on column "7.0", which is UNCHECKED. Is this correct?
My understanding is that, this check box needs to be CHECKED, since this is related " Only Valid for RSDS, TRFN and DTPA Objects ". Is this correct?
If yes, Can I check this box in QA system, save and retransport my requests. If so, what happens to standard BW objects i.e., transfer ruels, update rules etc...
OR do i need to create another entry with same source/target system and check the 7.0 box.
OR do i need to create 3 entries with same source/target system and check 7.0 box for each entry i.e., RSDS, TRFN, DTPA.
Finally, please advise the exact steps that need to be taken here...pros and cons
Your inputs will be of great help....
Thanks,
BI
Message was edited by:
B I

Hi,
Yes you need to check the checkbox as it is related to Data sources and transformation and DTPs. you can mark the check box if your client is modifiable, if not you need to transport the setting from DEV. Go to
SPRO > Business Intelligence>Transport Settings--> Change Source system name after transport.
you also need to maintain the Source system IDs .
Hope it helps.

Source System Info

Hi,
Please let me know, how to find - When the source system was last restored?
Thanks,
Shantanu.

Hi,
U will get the value of the source system from which the data is loading in p_r_request->get_logsys( ) inside the transformation.
Hope it helps.
Regards,
Rathy

Error in source system while extracting the data from R/3!

Hi,
i had created FM and extract strcucture in R/3 .
using the above two, i had created data source using RSO2 T code.
when i checked the extractor ( RSA3 T code) in R/3 it was working fine .
(status messege displayed as 1000 records selected).
then i assigned this data source to infocurce and creted info cube using the same info source.
but when i schedule the info package it is syaing in the monitor screen "error in source system".
what could be the problem?
Thanks,
Ravi

Hi
trhese are the possiblies
1.first check the source system connection and find if there is any error in it.
2.Go to sm37 and find whether the request is completed or not if its terminated find out the time. how long does it takes to complete the process.
3.once again relicate the data source and find whether is it again extract data.

BE3.5 : Error from the source system while activating the transfer rule

When I was trying to activate the transfer rule for one info object( charateristic with master data) , I got the following error in [[ ]]
Error when creating transfer structure /BIC/CCPIZGR00CC_ATTR in source system CI2220
Diagnosis
An error occurred when creating transfer structure /BIC/CCPIZGR00CC_ATTR as an IDoc segment in source system CI2220 .
System response
The action was terminated. No data was changed.
Procedure
Use the generation log in source system CI2220 to identify the error, and remove the cause.
CI2220 is the backend R/3 system, I had no issue in replicating the data source etc. this error occurred while trying to activate the transfer rule after assigning the info source to the replicated datasource in BW.
Can anybody tell me how to view( what transaction etc) the generation log to understand the issue?
Thanks in advance
Arunabha

Hi Arunabha,
I would confrim that there is no issue with the datasource in your r/3 system. Can you run the datasource on your r/3 system with no errors using RSA3?
If the datasource is ok, then I would check out the error message number in OSS or SDN. I have seen this error before, I just cannot recall what the fix was.
Cheers!

What are the sources system will pick the document type while creating invo

hi
I would like to know how system will pickup the doucment type while creating invoice in vf01.
i have taken off the fields f1, f2, from the document type. in billing sub tab. so The moment when am creating billing system automatically displaying F2 invoice doucment creation. What are the sources for this.
thanks & Regards
Rack129

Hi,
Hope you have maintained u2018Delivery relevant billing type F2u2019 and u2018Order relevant billing type F1u2019 in the billing tab of the Sales document type in VOV8.
If you create delivery related billing, the system will pick F2. This is controlled in Item category (VOV7). Billing relevance in Business data of Item category decides whether this is delivery related or order related. u2018Au2019 for delivery related billing; u2018Bu2019 for order related billing and so on.
Item category is determined by this combination: Sales document type + Item cat group + usage + higher level item cat.
Regards,
K Bharathi

Error in Source System while running the Full Load

HI Experts,
We are using 0CRM_UT_SRV_CONT_I datasource from CRM to extract data.
It is giving error while running the full load as 'Error Occured in Source system' with messaage Number : RSM340.
I want to mention certain points here:
1) In RSA3 its running fine.
2) Connection between BW and CRM system is OK.
3) We have replicated datasource and send active veriosn from Dev system.
4) When I run Init without data, Init set sucessful with entry in RSA7 in CRM.
5) Delta run fine with green status.
6) As source system is static client, hence do data for delta.
The Main issue happens when we run either the Full load or Init With Data transfer.
Kindly suggest.
Thanks
Mayank

Hi Mayank,
see in source system (CRM) with transaction SM21 and ST22 the error log and and then you let us know.
Charly

Error in code page mapping for Source system whil loading the data from ECC

HI Gurus,
I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
Please let me know if there are any settings needs to be made.
Many thanks in Advance
Jagadeesh

HI V,
Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
Do we need to do any settings in LBWE??
Thanks and Regards
Jagadeesh

Do we transport 0LOGSYS (Source System) Info Object?

We are transporting the info objects first time to the quality. when we selected the necessarry objects for the required info objects in transport Organization it also picked 0LOGSYS info object.
My question is do we transport 0LOGSYS info Object?
And also it has created a Task number which is a type of repair (Yello color if you see in the main screen of SE09).
why it has created a repair task?
Can anybody please explain this?
Thanks
Sonu.

[Hello Sonu,|http://chandranonline.blogspot.com]
Yes, you can transport 0LOGSYS InfoObject.
If the current system is not the original system of the object, the object will be assigned to a task of the type repair.
Repair in Change & Transport System
The modifications of SAP standard objects.
Repository objects that are changed in a system other than their original system are entered in repairs. Objects can be transferred from their original system by transports.
For more info see this [Request Types and Task Types|http://help.sap.com/saphelp_nw04/helpdata/en/19/3f5bf8a4b011d285090000e8a57770/content.htm]
[Thanks|http://chandranonline.blogspot.com]
[Chandran|http://chandranonline.blogspot.com]

Unable to 'set the default source system' to Install Business Content

Hi,
Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
Could you please help me out?
Thank you.

Hi,
It seems to be a bug in version 3.5.
Do like this:
After you open the screen to choose the dafault source system
Clcik on 3rd button(F6) available in the bottom of the scrreen.
And then select teh tick mark for required system.
And then click on Continue button
You have do this step before you drop the cube to right side of the cube.
Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
Drag and drop required cube with dat flow before.
Now you can see the Transfer rules with selected Source system only in the collected Objects.
With rgds,
Anil Kumar Sharma .P

Modelling the fields in the cube from different source system.......

Hi,
I need to create one query on the cube.
User want some of the fields in the query which are present in diffrent source system , rest of the fields are present in the cube.
These are master data fields ( 7 fields in total) from other source system.
Cube gets data from one ODS.
some steps I need to do are :
1) create new source system
2) Create corresponding objects in BW.
3) Model the things in ODS and cube
Can somebody let me know what is the best way/steps to model such scenario.
Thanks, Jeetu

Hi,
Replicate both the data sources to BW.
Create 2 infosources/transformations, map them to respective fields and infoobjects.
Now assign them to cube and load the data
hope this helps.
Rgs,
I.R.K

Source System in Transformation

Hi Experts,
Here is my scenario. We have number of BW Systems (RBW1 to RBW5 ) for each continental regions. All these should load data to one Global BW System ( GBW ). RBWs have ODSR1 to ODSR5 and all of it will be connected to DSOG1 in global system.
Now the question is how do i make namespace value unique in GBW. I use Source System as an identifier. In the transformation how do i populate Source System Infoobject??
Please help.
Thanks,
DV

no need to enhance the DS.... you can write a filed level routine on it.
create an infosource in between the IO and the transformations and include the filed... and write the filed level routine to that filed.
You can use the below code to call the source system id .use the below FM...
CALL FUNCTION 'RSDG_ID_GET_FROM_LOGSYS'
 EXPORTING
 i_source_system = l_sourcesystem
 IMPORTING
 e_soursysid = RESULT
 EXCEPTIONS
 id_not_found = 1.
IF sy-subrc <> 0.
 RETURNCODE = 4.
 MESSAGE e087(r7) WITH l_sourcesystem INTO l_text.
 MOVE-CORRESPONDING syst TO l_s_errorlog.
 l_s_errorlog-record = RECORD_NO.
 APPEND l_s_errorlog TO g_t_errorlog.
ABORT = 1.
ENDIF.
Edited by: prashanthk on Feb 24, 2011 10:59 AM

CLIENT of the source system in the Transfer Rules

Hi,
Can I get the CLIENT of the source system dynamically in the Transfer Rules (and assign it to an InfoObject)?
I have a generic extractor from a R/3 source system. The table in the source system & the extract structure the DataSource both contain MANDT, but its not coming in the RSO2 screen (which, if I'm not wrong, is how it should be).
I need the CLIENT info. in my BW data targets. I do not want to hardcode this value in Trans Rules as the client in Dev & Prod is different for my R/3 sys.
If I can't get it directly from the DataSource, is there any way I can get it from any system field using routine?
If I'm not wrong - SYST-MANDT in the Formulas will give me only my BW CLIENT.
Thanks in advance for your help.
Regards,
Melwyn

hi,
i think if your bw dev and prod client is different you can try in transfer rules
if sy-mandt = xxx. ( bw dev client number)
result = 'yyy'. (source system dev)
else.
result = 'zzz'. (source system prod)
endif.
or enhance the extract structure/ append structure with zz field for mandt and field in user exit zxrsau01 with sy-mandt
or if use infoobject 0LOGSYS, populate in transfer rules with result = g_s_minfo-logsys.
hope this helps.

An error occurred in the source system

Hi Gurus,
when i am trying to load the data into the master data object 0PMNT_BLOCK_TEXT ,I am getting the error "an error occured in the source system"with caller 09. and the error message contains "no transfer structure available for info source 0PMNT_BLOCK_TEXT in the source system and "errors in source system".
I have loaded the data in development and quality environments succesfully.this problem is causing in production environment.all other loads are working fine.
Please give me your valuble inputs.
regards
Sridhar V

Hi,
there may be no connection with source system to BW system.
please check the same in RSA1 Source system tree for the source system, context menu, check the connection.
if not activate the transfer stru. of this object in BW system by replicating the datasource.
Regards,
Vishwa.

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

Source system info in the transformation

Similar Messages

Maybe you are looking for