SPA525G - Time Format and Call Progress Tones

Hello.
Can any one advise how I can change the date format from MM/DD to DD/MM - we'd prefer the UK format.
Also, does anyone have the settings for UK tones instead of US ones?
Documentation on both of these features is quite lacking.

You can change the date with the date-format command within telephony-service for SCCP or voice register global for SIP.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesystm.html#wp1012871
As for the UK tones, the user-locale command should do the trick after loading the appropriate locale.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelocal.html

Similar Messages

  • Calendar time format and week start format

    Even though I have the time format set to 12H it displays as if it was 24H in the calendar:
    Also, is there any way to change the format of the date picker? We want the week to start on Sunday instead of Monday:

    Hi,
    1. Tested in 8.81 and 8.82 versions that, the time format in general settings does not apply to calendar time format. Changes applicable only to documents
    2. You can change starting of week through calendar form settings. But selection of date still appears from Monday.
    Refer below screen shot:
    Thanks & Regards,
    Nagarajan

  • Waveburner : Time Format and Track start marker insertion ?

    Hi,
    I am exporting the Markers from a Final Cut Pro project to get their position.
    I copy/paste this time code in a Track start marker in Waveburner to set it in the right position.
    The problem is that in Final Cut Pro the time is set in HH:MM:SS:Fps  (Frames per seconds (25 fps in my PAL project)
    And in CD tracks window (sorry I am translating from a French user interface) it's not the same time format : CDDA frame (1/75th of a second)...
    so the track position is approximative (less than 1 second)
    I have selected the right time unit in the Wave View : Min:Sec:Im (25fps)
    In preferences I checked "Set Time Format Globally checkbox"
    But it's still in CDDA when I insert  a track marker...
    How could I manage that ?
    Thanks for your help
    Eric

    Seems there is no edit button here.
    After having another go at this problem, I think I have found a better solution that solves both formatting and date entry problem. The only downside is that you'll need to make 5 columns for a single date rather than 1.
    Step 1.
    For each date entry, create the following columns:
    | FormattedDate | NumbersDate | Day | Month | Year |
    FormattedDate is the final date displayed according to our format.
    NumbersDate is the internal Numbers date representation.
    Day, Month, Year columns are the ones you use for data entry.
    Step 2.
    Create/convert our 3 columns date (Day, Month, Year) into Numbers internal date.
    So, in NumbersDate column, insert this formula:
    NumbersDate: =DATE(Year, Month, Day)
    Step 3.
    Apply our own formatting for the date output display. In this example, I want an output in the form of Dayname, Day Month Year (Saturday, 24 September 2011).
    FormattedDate: =DAYNAME(NumbersDate) & ", " & (Day) & " " & MONTHNAME(Month) & " " & (Year)
    This way, changing the raw date input is as simple as changing the respective column. If any discrepancy between entered and displayed data exist, it is easily spotted by comparing between the raw date columns and the formatted output.
    Another advantage is reducing the risk of data corruption to the date, since the date is now simply represented as integer values in their respective columns.

  • String to Time format and check it

    I create a Jdialog that I wish that it could input time of someone entering in my house.
    I use jTextField2.getText() to get the String.
    How could I check if it is "hh:mm:ss" format?
    and how to convert it to Time that I could store in DBMS -- MySQL.
    thank you a lot.

    iwould convert it to timestamp-format!
    And to fetch it (Database) u can use this:
    SELECT DATE_FORMAT(timestamp, '%d.%m.%Y %H:%i:%s') as datetime FROM table
    oki?

  • Few bugs: Video podcasts name and 12 / 24 time format

    As a gift for NY I got iPod nano 5th.
    Of course device look great, but...
    1) I am used to watch video podcasts (CNET) on iPod. My previous iPod nano (3rd) displays podcast's episode name if I click center button during playback. It shows time than episode name at the top of screen, very handy to watch a set of episodes. My new iPod nano (5th) displays only time. So, I need stop playback and go to episodes list to check "now playing" episode name, very frustrating. Is it a bag or stupid restriction?
    2) Occasionally my new iPod nano (5th) lost 24 h time format and start display AM/PM. I can't recognize why it happen, but I should go to settings to correct this. And Pedometer daily activity bars graph always displays time in AM/PM despite of time format settings. Is it a bug?

    If the solutions cannot be found in the iPod Nano 5th Gen. User Manual or Apple's Knowledge Base - http://support.apple.com/kb/index?page=search then it is time to call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273).

  • Wrong DATE-TIME FORMAT among REPORTS NOTIFICATION EMAILs

    Dear all,
    I create a report request with url
    https://ocixxxx2.oci.xxcl.net/reports/rwservlet?>destype=printer&desformat=PDF&server=rep_xxxxx2_orahome&userid=ixxxxxx/xxxxxxx@saas&notifysuccess=IASL&notifyfailure=IASL&report=R1000R13.rdf&jobname=R1000R13&desname=HPLaserJet4150PCL6
    Email notification was generated with wrong date format .
    It's expected to be in UK English but it shows encoded text , may be random. I route it to another email servers such that find the date time is in chinese characters . That caused problem on original email server in which was not supported
    Could any expert please advice ?
    Warmly
    Edited by: MosielleKwan on 2010年2月26日 下午11:31

    It's indeed an expected behavior.
    When a Reports Server starts on a Windows machine, it likely detect the Windows Regional Settings in order to use it when needed later. This let the Reports Server communicate in the same format/way the Server machine uses. For example, if the System / Application Server administrator prefers to use the Windows (on which the Application Server is installed) with Chinese Regional Options, it is normal that the Reports Server send the Notification Email with a "Date/Time" Format matches the Windows.
    Thence, you like to get English/Western Date and Time format in the Reports Server Notification Email, it is required to change the Windows Regional Settings from Chinese to English and restart the Reports Server and restart the corresponding compoent. This will let the Reports Server detect the change and will send the Notification Email(s) then with English/Western Date and Time formats.
    If English/Western Date and Time format in the Reports Server Notification Email but still have the Windows Regional Settings set to Chinese, you can implement it
    that :-
    1. Change the Windows Regional Settings from Chinese to English.
    2. Restart the Reports Server and restart others.
    3. Change the Windows Regional Settings back from English to Chinese. .
    With these 3 steps, the Reports Server will keep sending the Notification Emails with English/Western Date and Time format, and maintain original settings.

  • Time format change from 24 hr format to 12 hr format

    Hai all,
    The client wishes to enter the time in the 12 hr format.could you please tell me , what are the necessary settings to be done from convertion of 24 hr format to 12 hr format ?
    How it can be done at user level and T.Code level?
    Please throw some ideas.
    Regards,
    Suresh.

    Hai,
    This is  for the updation of the past data where they have maintained the time format as 12 hr format.Since while uploading, it is very difficult to change into 24 hr time format and i need to change the settings so that system should take the input as 12 hr format. There is no problem whatever the output shows either 12 hr or 24 hr format.
    Please throw some ideas
    Regards,
    Suresh.

  • When i turn my mac on i get the white screen and a progress bar that when finished shuts the computer down

    i recently came back from holiday and tried to start up my laptop (that stayed at home, just shutdown but plugged in). when i turned it on, i got the apple white screen, a timer wheel and a progress bar that when it reached the end of the bar, it just shut the computer down again. i cannot get past this screen and the mac will not turn on. does anybody know how i can fix this please?

    Your hard drive is dead and you'll need a new one. If you're the least bit handy, you can replace the drive yourself. You need to decide what capacity and speed you want out of a new drive.
    I'm hoping that you had backup schemes in place? If not, there's a chance that, with a tool such as DiskWarrior, you MIGHT be able to grab some data from your dead/dying drive.
    Clinton

  • Getting date and time format through RIDC call

    Hello,
    i want to set date and time features to my document , how can i get the date and time from RIDC call
    Regards
    Mayur Mitkari

    Hello
    I am performing this operation for getting date
    username = Util.getInstance().getCurrentUser().toString();
    IdcClient myIdcClient = Util.getInstance().getUCMConnection();
    IdcContext myIdcContext = new IdcContext(username);
    DataBinder binder = myIdcClient.createBinder();
    binder.putLocal("IdcService", "COLLECTION_GET_COLLECTIONS");
    binder.putLocal("hasCollectionID", "true");
    binder.putLocal("dCollectionID", parentNodeID);
    idcResponse = myIdcClient.sendRequest(myIdcContext, binder);
    DataBinder serverBinder = idcResponse.getResponseAsBinder();
    DataResultSet resultSet = serverBinder.getResultSet("COLLECTIONS");
    folderInfoList = new ArrayList<String>();
    resultInfoList = new ArrayList<List>();
    Iterator itr = resultSet.getRows().iterator();
    while (itr.hasNext())
    String dCreateDate = dataObject.get("dCreateDate").toString();
    but i am getting date in this format "2012-05-22 08:26:52Z"
    if i want the date in local timezone what can i do
    Regards
    Mayur Mitkari

  • I have a wireless home phone connect device. Can call out on it when dial tone present, but most times cannot receive calls since purchase. Anyone else having a  problem with their home connect device?

    Have had Wireless Home Phone connect device refreshed and updated three times since I purchased it in September 2014. Last tech I worked with on it initialized an NRB to check the network. I checked the location of the tower, which is less than one mile up the hill with clear line of site. The device always has two antennas on it. The device is great when it does work, but most of the time it rings three times and then jumps to an automated message saying the person I am calling is not available. I've actually gone up there several times to try an fix the device, but always end up calling a Verizon tech who has me unplug it, pull the battery, and they do some network stuff and then we turn it back on and it works. After the last time on 10/02/14, I called it and got the message. I drove up there, 100 miles one way, and called it while standing in the room. Got the same message. I picked up the phone, heard a dial tone and dialed my phone and it range through. I hung that phone connected to the device and call it using my cell phone. It rang through. I went home and tried to call it the next day. Again it did not ring through and I got the message after three rings. I call another phone at the facility and had them call me on my mom's phone and it is fixed it again. The fix last for a day or two and then it's broken again, like it is today. If it's a network problem then it must be fairly close to the area because no matter what we do it fails again. So much for the 99.98% reliable. This thing is a piece of junk!
    I purchased this device and put it on my plan so that my mother who we placed in a home at 96 years old would have a phone connection that she could use and wouldn't flip her out. My family and her family has not been able to faithfully connect with her at this critical time in her life. I am giving Verizon 10 more days to figure this out and then I am going to ask for a total refund not to mention how much time and travel I have put into this piece of junk. Either the home connect transceiver is broken or the network is broken. Why should I pay close to $70 for a service that has not worked more than several days out of 35 days? Also I have spent close to three hours on the phone with decent technical people, but it's my time. I should send Verizon a bill for every time I have gone up there to fix this device as well.
    What perplexes me is that a regular cell phone would have sufficed, but because Verizon has to have a data connection that is not available on a regular phone and it was going to cost me $30/month, I decided to go with the home connect. Seemed like a nice solution for an older person who would have a hard time using a cell phone and keeping it charged. Plus after all the fees for getting it connected, it only cost $20/month. That would be a pretty good thing, IF IT WORKED....... The other thing that irks me is, why do I have to pay for a data connection when the cell phone Verizon originally provided can't even access the network. What ever happened to adding a phone line for $10 bucks\ month? All I wanted was a simple phone. She would not be able to use anything more complex and all she needs is a phone line period.
    I have no problem paying for something that works and does what it should, but this is ridiculousness. The MTF on this device is somewhere around 1 to 2 days. Out of 365 days that's about a 96.5% failure rate....... Want my advice? Get ride of this device. It sucks and it's bad marketing.

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Data services with SQL Server 2008 and Invalid time format variable

    Hi all
    Recently we have switched from DI on SQL Server 2005, to DS(Date Services) on SQL Server 2008. However I have faced an odd error on the query that I was running successfully in DI.
    I validate my query output using a validation object to fill either Target table (if it passes), or the Target_Fail table (if it fails). Before sending data to the Target_Fail table, I map the columns using a query to the Target_Fail table. As I have a column called 'ETL_Load_Date' in that table, which I should fill it with a global variable called 'Load_Date'. I have set this global variable in the script at the very first beginning of the job. It is a data variable type:
    $Load_Date = to_char(sysdate(),'YYYY.MM.DD');
    When I assign this global variable to a datetime data type cloumn in my table and run the job using Data Services, I get this error:
    error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver]Invalid time format>.
    However I didn't have this problem when I was running my job on the SQL Server 2005 using Data Integrator. The strange thing is that, when I debug this job, it runs completely successfully!!
    Could you please help me to fix this problem?
    Thanks for your help in advance.

    Thanks for your reply.
    The ETL_Date is a datetime column and the global variable is date data type. I have to use the to_char() function to be able to get just the date part of the current system datetime. Earlier I had tried date_part function but it returns int, which didn't work for me.
    I found what the issue was. I don't know why there were some little squares next to the name of the global variable which I had mapped to the ETL_Date in the query object!!! The format and everything was OK, as I had the same mapping in other tables that had worked successfully.
    When I deleted the column in the query object and added it again, my problem solved.

  • New LUN Takes A long Time To Format and Errors Out

    Good afternoon,<o:p></o:p>
    I have a Hyper-V Cluster composed of 4 nodes and these nodes are able to access multiple CSVs (14 in total). I recently requested a new LUN (LUN 15)to be provisioned
    to my Hyper-V cluster in the size of 500GB. Here is my problem:<o:p></o:p>
    1. Formatting of a 500GB LUN (with quick format selected) should not take more than a few seconds. Instead, the quick format takes about 2hrs if not longer. I have actually
    seen it go for half the day.<o:p></o:p>
    2. Once the formatting has completed (no errors), taking the formatted LUN offline freezes the Computer Management screen and shows the status (Not Responding). This
    will take place for 30 minutes or less and show that the LUN has been taken offline.<o:p></o:p>
    3. In the Failover Cluster Manager, detecting the disks takes about 15 minutes. Once the available LUNs have been detected I can add the 500GB LUN to the Disks screen
    without any problems.<o:p></o:p>
    4. While in the Disks screen, adding the LUN to the Clustered Shared Volumes takes about 5 minutes (too long).<o:p></o:p>
    Already seeing that there is a problem, I went ahead and used the Hyper-V Manager to create a 200GB vhd on the new LUN which has been added to the CSV. The bar indicating
    the progress of the vhd creation does not display any progress (no green progress bar appears, not even a tiny bit of it) and after 3 hours (more or less) I receive an error, stating that the creation of the vhd failed.
    <o:p>NOTE: The vhd shows up in Volume 9 (LUN 15) but I can only bet that it will not work, plus I would not want to work with a vhd file which failed during the
    creation process.</o:p>
    <o:p>Long story short, I repeated the above steps to see if that was a temporary problem, but it is not. The same problem occurs no matter which Hyper-V cluster
    node the operations are performed on. I would like to add, that I tested the creation of a vhd on an already configured LUN and the creation was completed successfully, and within a n expected time frame.</o:p>
    NOTE: When LUN 15 errors out, it's status shows "Failed" in the Failover Cluster Manager. This in turn, causes the re-scanning of available disks to take forever (in Computer Management) and it keeps searching. Pretty
    much, the fail of one LUN affects the entire functionality of the entire Hyper-V Cluster. 
    Errors Listed In Event Details For LUN 15:
    1. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer accessible from this cluster node because of error 'ERROR_TIMEOUT(1460)'. Please troubleshoot this node's connectivity to the storage device and
    network connectivity.
    Event ID: 5142; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
    2. Cluster Shared Volume 'Volume9' ('Cluster Disk 5') is no longer available on this node because of 'STATUS_IO_TIMEOUT(c00000b5)'. All I/O will temporarily be queued until a path to the volume is reestablished.
    Event ID: 5120; Source: Microsoft-Windows Failover Clustering;Task Category: Cluster Shared Volume
    3.Cluster resource 'Cluster Disk 5' of type 'Physical Disk' in clustered role '4530acc9-8552-4696-b6c3-636ff8d58c46' failed.
    Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it.  Check the resource and group state using Failover
    Cluster Manager or the Get-ClusterResource Windows PowerShell cmdlet. 
    Event ID: 1069; Source: Microsoft-Windows Failover Clustering;Task Category: Resource Control Manager
    4.
    Cluster resource 'Cluster Disk 5' (resource type 'Physical Disk', DLL 'clusres.dll') did not respond to a request in a timely fashion. Cluster health detection will attempt to automatically recover by terminating the Resource Hosting Subsystem (RHS)
    process running this resource. This may affect other resources hosted in the same RHS process. The resources will then be restarted. 
    The suspect resource 'Cluster Disk 5' will be marked to run in an isolated RHS process to avoid impacting multiple resources in the event that this resource failure occurs again. Please ensure services, applications, or underlying infrastructure
    (such as storage or networking) associated with the suspect resource is functioning properly.
    Event ID: 1230; Source: Microsoft-Windows FailoverClustering;Task Category: Resource Control Manager
    Any and all help will be appreciated!

    Hi AquilaXXIII,
    What server edition you are using? If you are using 2012r2 as cluster node, please install Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
    update first,
    Recommended hotfixes and updates for Windows Server 2012 R2-based failover clusters
    http://social.technet.microsoft.com/Forums/en-US/f9c1a5f7-4fcf-409a-8d7e-388b85512bfe/new-lun-takes-a-long-time-to-format-and-errors-out?forum=winserv
    Before you install the new shared storage please first validation this storage first, you can refer the following KB to validation the new LUN.
    Understanding Cluster Validation Tests: Storage
    http://technet.microsoft.com/en-us/library/cc771259.aspx
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I am trying to export a PDF to MSWord format and it won't go ... Last evening, I spent much time on

    I am trying to export a PDF to MSWord format and it won't go ... Last evening, I spent much time on line with Bishwarup on line.
    After a great deal on digging on his part, he suggested that I call back today when the Techies were on duty.
    HELP!

    Pat, TNX for the ‘come-back’ …
    By ExportPDF service do you mean the AP that converts formats? I have that AP all bought and paid for. That’s the thing that gagging on my file.
    The error msg. was “File failed to be converted using Adbobe ExportPDF online.”
    I’m not sure what you’re talking about when you suggest using Acrobat

  • My final cut keeps on closing down after about 10 - 15 minutes of editing and deletes my progress it has done this about 6 times now and was wondering if anyone had had this problem and overcame it?

    my final cut keeps on closing down after about 10 - 15 minutes of editing and deletes my progress it has done this about 6 times now and was wondering if anyone had had this problem and overcame it?

    What version of FCP X are you using?
    What is the full spec of your Mac?
    What codec (file format) of video are you working with.
    Andy

  • When I swipe phone to open, and hit the phone icon, then make a call, most times it says "calling mobile" but then nothing happens.

    Same thing here.  I'm getting very frustrated.  When I swipe phone to open, and hit the phone icon, then make a call, most times it says "calling mobile" but then nothing happens.  Then I try to end the call and hit the END button.  Sure, it looks like the call disconnected, but as soon as I try to make another call, I see the same screen (the first called) and the words "calling mobile".  The only way I can rememdy this, naturally, is powering off and restarting.  But, c'mon...$300 for a phone that you have to power down between calls???
    I've got the latest OS update, no jailbreak, or anything exotic on my 4s.  What's more, when I try to make a call 2 out of 3 times, the dumb SIRI opens up and stops me from making the call.  (and, yes, I have very carefully checked my process that I am not intentionally activating SIRI with my cheek.)
    Again, $300 for all this in just trying to make a call?

    reset your phonr by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Maybe you are looking for