SPA9000 - transferring calls to my home

Hello.
Background:
My accountancy practice is about to install spa9000 and spa400 and linksys phones.
I would like to be able to make a call from home to the office and vice versa.
At home I have an ASDL (broadband) service in New Zealand. I use a wireless router( a netgear dg834gt) at home.
I am happy to change the router if needed.
Question:
Will this type of router work, or, do I need one with special protocals. Does linksys have a suitable one?
Is it as simple as this or is there some other equipment I need.
Thankyou
Mark

The router is fine as long as you have internet. All you have to do is plug the WAN port of the SPA-9000 to the LAN port of the router. Connect the SPA-400 and IP phones to any available LAN ports on the router. If you are using the Linksys Voice System IP phones then it will automatically register to the SPA-9000. All you need to think is the VOIP provider to be registered on any Lines of the SPA-9000.

Similar Messages

Report on transferred calls

I need to report on transferred calls. Agents are using standard CAD and selecting the transfer icon. Within the transfer form, they use the softphone to dial various 800 numbers. I need to create a report that I can group by 800 numbers called using the CAD transfer option. Does this come from the call manager? We recently implemented CVP. Are there any CVP reports that would provide this information?

Hi Ryan
I'm afraid there isn't one - only the CSQ Activity reports and the CSQ Service Level Priority Summary reports seem to show the service level info, and those are summary reports rather than reports that show call lists.
You would need to get a custom report put together for this... it's an Informix SQL procedure-writing and Crystal Reports exercise to do that.
Regards
Aaron

We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had t

We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had to go outside to get reception without dropped calls. I was told that because of metal in my home I would have to purchase a Network Extender for $250. And we HAVE not metal in our home. AND our other lines all work fine. I felt this was ridiculous. We already pay $350+/month for service and I should NOT have to purchase additional equipment for a service that I already pay for. The manager of our local store at the time gave us at no cost a Samsung Network Extender. It worked beautifully until about a month ago. I went to our local Verizon store and was told that I would have to purchase an extender. THIS is RIDICULOUS. We have been loyal customers for over 7 years and have been very satisfied with our service. Unless this issue can be resolved without purchasing an extender we will be switching our service as our lines come up for renewal. I regret this as we have been very happy with our service. But we should NOT have to purchase anything extra for one line that will not get good reception. Again, we pay $350+/ month for a service that does not work properly, simply RIDICULOUS! Currently the "sys" light flashes red (slow) and the GPS light remains red. Please help this very frustrated customer.

Regardless with what carrier your with you might have the same issue, My recommendation would be to get a router that will help you with viewing live traffic and keep a tally of your usage and any device connected to your internet connection. You can go with the peplink balance 20 and be able to look at your traffic by the hour, daily, weekly, monthly or yearly. Look for trends, see what computers or devices are doing what I attached a screen shot so you can see an example of mine. You can purchase the router at 3gstore
http://i45.tinypic.com/6zc674.jpg

Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push

Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push. First smart phone I have owned and the old flip phone was much easier to answer.....just press one button.

Is there a way to answer the 5c without swiping? It really is a pain and hard to do at times one handed. Maybe allow favorites to be answered with a click of the home button or possibly all calls with a home button push. First smart phone I have owned and the old flip phone was much easier to answer.....just press one button.

AutoAttendant not transferring calls in CUE 8.6 to CME 9.1

**Issue is calls are not transferring once extension or directory is pressed on the phone.
I upgraded our 2811 CME 7.1/CUE 7.0 router to 2911 15.2 CME 9.1/CUE8.6. It has CME and V/k9 license enabled. I uploaded the configuration used on the 2811 to the 2911. I added the ip addresses in the ip trusted list. Calls come in and out if I point the translation list to the phone and not to the auto attendant pilot number. Incase if it was toll fraud issue I disabled it but still a no go.
Everything worked fine on the 2811. I can't understand why it would not work on the 2911 15.2. Has anyone had any issues when upgrading from 12.4 to 15.x with auto attendant not transferring calls?
I ran a trace on the Cue when placed a call to extension 114:
20.10.10.1- CME interface address
20.10.10.5- CUE interface address
659 09/12 11:43:39.418 ACCN SIPS 0 Call.transferFailed(114, RESOURCE_NOT_ACKNOWLEDGING) SIPCallContact[id=33,type=Cisco SIP Call,implId=5738D3Dse-20-10-10-5# [email protected],active=true,state=CALL_ANSWERED,inbound=true,handled=false,locale=en_US

Ok I'm starting to think its a dtmf issue. I checked to see if I call from internal to the AA and dial an extension if it works but the same issue. I ran the debug voip ccapi inout and I see consume mask is not set. What would that indicate? Could that be the problem?
This is right when I dialed extension 114
2811-TEST#
001288: Sep 16 14:59:22.870: //55/D62BA3D180C8/CCAPI/cc_api_call_digit_begin:
   Consume mask is not set. Relaying Digit 1 to dstCallId 0x38
001289: Sep 16 14:59:22.870: //55/D62BA3D180C8/CCAPI/cc_relay_digit_begin_for_3way_conference:
   Check DTMF relay digit begin for 3way conf
001290: Sep 16 14:59:22.870: //55/D62BA3D180C8/CCAPI/cc_api_call_digit_end:
   Consume mask is not set. Relaying Digit 1 to dstCallId 0x38
001291: Sep 16 14:59:22.870: //55/D62BA3D180C8/CCAPI/cc_relay_digit_end_for_3way_conference:
   Check DTMF relay digit end for 3way conf
001292: Sep 16 14:59:23.194: //55/D62BA3D180C8/CCAPI/cc_api_call_digit_begin:
   Consume mask is not set. Relaying Digit 1 to dstCallId 0x38
001293: Sep 16 14:59:23.194: //55/D62BA3D180C8/CCAPI/cc_relay_digit_begin_for_3way_conference:
   Check DTMF relay digit begin for 3way conf
001294: Sep 16 14:59:23.194: //55/D62BA3D180C8/CCAPI/cc_api_call_digit_end:
   Consume mask is not set. Relaying Digit 1 to dstCallId 0x38
001295: Sep 16 14:59:23.198: //55/D62BA3D180C8/CCAPI/cc_relay_digit_end_for_3way_conference:
   Check DTMF relay digit end for 3way conf
001296: Sep 16 14:59:23.614: //55/D62BA3D180C8/CCAPI/cc_api_call_digit_begin:
   Consume mask is not set. Relaying Digit 4 to dstCallId 0x38
2811-TEST#
001297: Sep 16 14:59:23.614: //55/D62BA3D180C8/CCAPI/cc_relay_digit_begin_for_3way_conference:
   Check DTMF relay digit begin for 3way conf
001298: Sep 16 14:59:23.618: //55/D62BA3D180C8/CCAPI/cc_api_call_digit_end:
   Consume mask is not set. Relaying Digit 4 to dstCallId 0x38
001299: Sep 16 14:59:23.618: //55/D62BA3D180C8/CCAPI/cc_relay_digit_end_for_3way_conference:
   Check DTMF relay digit end for 3way conf
2811-TEST#
At this point theres silence on the phone I see this message:
2811-TEST#
001300: Sep 16 14:59:28.914: //55/D62BA3D180C8/CCAPI/ccGenerateToneInfo:
   Stop Tone On Digit=FALSE, Tone=Null,
   Tone Direction=Sum Network, Params=0x0, Call Id=55
001301: Sep 16 14:59:28.918: //56/D62BA3D180C8/CCAPI/cc_api_call_feature:
   Feature Type=50, Interface=0x49FC2B80, Call Id=56
2811-TEST#
2811-TEST#
At this point I get the message "the phone number you are trying to reach" then the call disconnects
2811-TEST#
001242: Sep 16 14:48:57.719: %VOICE_IEC-3-GW: SIP: Internal Error (ACK wait timeout): IEC=1.1.129.7.67.0 on callID 52 GUID=5D21AC143CE711E480BCEEC6B624839
Also I checked show voice iec description:
2811-TEST#show voice iec description 1.1.129.7.67.0
    IEC Version: 1
    Entity: 1 (Gateway)
    Category: 129 (Call setup timeout)
    Subsystem: 7 (SIP)
    Error: 67 (ACK wait timeout)
    Diagnostic Code: 0
2811-TEST#

CTI OS desktop client freezes after release of transferred call

Using CTI OS desktop v7.5(9), UCCE 7.5(9), Endpoint is CIPC 8.6.3 on CUCM 7.1.3
ACD call received by Agent 1 on ext 1111
Agent 1 transfers to 1112
Agent 2 answers transferred call on 1112 using answer call button.
Agent 2 disconnects using Release Call button on CTI OS desktop
Call disconnects but stays in grid with status 'Talking' and buttons on CTI OS desktop become unresponsive. CIPC is fully usable independently.
Agent 2 can reset by killing the CTIOS Desktop process and restarting.
This condition ONLY occurs as the result of an inbound transfer to Agent 2. It does not appear to happen when a call is transferred to Agent 1 in a similar scenario (Agent 1 is on a 7942)
Any thoughts as to why this occurs?
Thanks so much for any assistance!

Hi,
looks like for some reason the CIPC does not informs the CUCM about the call released event. Or it does, it's only the JTAPI gateway that misses it.
Did you try upgrading/downgrading the firmware of the CUPC?
Also, I am not quite sure that CIPC 8.x is supported. It might be, but it certainly is not on the list:
http://docwiki.cisco.com/wiki/Unified_CCE_Software_Compatibility_Matrix_for_ALL_7.x_Releases
G.

Original and transferred calls

Hi All,
In TCD what is the common field between an original inbound call and a transferred one by the agent.
Agent ID is not displayed in transferred call field.
Regards,

Hello my friend
I will extend your question to cradle to grave call tracking including CVP and CUCM CDR as well with the following answer (copyrighted by David Reich), but you can choose what is suitable for you...
Mapping CDR to TCD
The UCManager CDR does have a mapping to ICM Termination Call Detail record, but you need to do some conversion.
The CDR globalCallID_CallManagerID and globalCallID_CallId is combined to create the TCD PeripheralCallKey.
The globalCallID_CallManagerID is moved into the high order byte. To shift it over the properly, multiply it by the hexadecimal value 1000000 and add it to the globalCallID_CallId.
So:
(globalCallID_CallId * 0x1000000) + globalCallID_CallId = PeripheralCallKey
These IDs are not unique because the same PeripheralCallKey and CallID are re-used in redirect, transfer and conference scenarios.
Also, this only works with in a single cluster. So in a multiple cluster environment, you need to map Cluster CDRs to a specific PeripheralID.
Cradle to Grave Call Tracking in ICM
The RouterCallKeyDay, RouterCallKey, and RouterCallKeySequenceNumber will track a call from its first route until its final call leg.
The RouterCallKeyDay and RouterCallKey combine to provide common attribute across the calls.
The RouterCallKeySequenceNumber gives you some sense of order of when calls were created. (gselthof: so note, 'some sense' is not guaranteed order!!!)
In a multi-peripheral environment, this requires routing between peripherals. This means calls to the IVR need to be translation routed, and calls to other agent clusters need to be routed as well.
Identifying Routed Agent TCDs
You will want to filter out the TCDs created for the CVP call legs, and calls are generated for agents for internal agent to agent calls.
Use the AgentSkillTargetID to identify agent, SkillGroupSkillTagetID to identify SkillGroup, and CallTypeID to identify Call Type / program.
If all three of these values are filled in, you know you got a call that was routed to an agent.
Sometimes more than one TCD will meet these three criteria for the same PeripheralCallKey In those cases, the one with the lowest RouterCallKeySequenceNumber will identify the first call answered by the agent.
CallDisposition
The CallDispositionFlag is the best indicator to find out if a call was handled or not. There are a bunch of CallDispositions. The CallDispositionFlag distills the results down to 7 categories.
You can find details on what the CallDispositionFlags are in the schema help or schema guide.
Cheers and Happy New Year!
Goran
TAC

UCCX Historical Reporting - Transferred Calls

Hi All,
I've hit a brick wall in a UCCX script I'm currently working on. My client has requested stats on where agents are transferring calls. It's an operator-type position and it's fairly important to the client that she be able to guage the call volume to particular extensions.
I've gone through the majority of the standard report templates in UCCX Historical Reporting but haven't found anything suitable. I did notice that the "Agent Call Summary" report states the number of transferred called by a particular agent but not the extension the call were transferred to.
Any advice would be greatly appreciated!
As always, thanks in advance.

What you want is essentially a custom cradle to grave report. I'm sure there are reporting packages that can do this but they are quite spendy.
You basically want to tie a UCCX session to the CDR records from the CUCM; if you are familiar with SQL that shouldn't be too much of a challenge. The trick is automating it.

CAD goes not responding as soon as transferred call is attempted to conference.

CAD goes not responding as soon as transferred call is attempted to conference.
Windows 7 version 32 & 64 bit.
The agent is using the phone for transfer and conference and the CAD application
goes not responding.
When we are restarting the subscriber it is working fine.

Can Someone please help me on this

I accidently download a toolbar called "Shop at Home"--how do I get rid of it, thanks.

How do I get rid of a toolbar called: "Shop at Home", thanks

You can check for recently installed suspicious or unknown extensions.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Extensions that do not have a "Remove" button are installed by other software and are not under control of the Firefox extension manager.<br />
Such globally installed extensions are usually found via a registry scan or are installed in a location that Firefox scans for installed extensions.
* https://developer.mozilla.org/en/Adding_Extensions_using_the_Windows_Registry
Extensions installed this way need to be removed via the settings (options/preferences) of the program that has added this extension or you need to uninstall this program via "Control Panel > Programs".<br />
In Firefox you an only disable such an extension.

Why won't my Razr Maxx ring when called from my home phone or the other cell phone (I-phone) on my Verizon account?

Why won't my Razr Maxx ring when called from my home phone or the other cell phone (I-phone) on my Verizon account?

Hi Ruth:
Thanks for reaching out to me about this issue.
This has been happening since I got the phone a couple of years ago.
I did not realize that my home land line and my wife's cell phone
always go straight to voice mail until my wife pointed it out to me
several months ago. Is there a setting I can adjust?
Yes, I can make calls to our home land line and to her cell phone
without being diverted to voice mail.
Any advice you might have would be most welcome.
Thanks.
Greg Bostwick
On 12/22/14, Verizon Wireless Customer Support

HT202213 How do I undo automatic transfers set up on home sharing?

How do I undo automatic transfers set up on home sharing? After I set up home share to automatically transfer music from one computer, that library does not show up under the sharing tab, and I can't get it back to change the settings. I tried turning home share on and off, but that does not bring the library back. Also uninstalled and reinstalled itunes; that didn't work either...

Troubleshooting Home Sharing - http://support.apple.com/kb/TS2972

Query for transferred calls

I am attempting to create a report of transferred calls from the calldetailrecord table in the CDR database using Call Manager 4.2. I have read the documentation provided for the table and it looks to me like if there is a call from 555-1212 to ext 100 and ext 100 transfers it to 101, I should see something like this:
CallingPartyNumber,FinalCalledPartyNumber
555-1212,100
100,101
555-1212,101
However, I have a few problems. First of all, I can't find anything like this pattern in over 4 months worth of data from our system, where lots of calls are transferred each day, although right now I'm just kind of combing through using different queries by time etc. Also, I have a lot of records where the CallingPartyNumber column is blank, or the OriginalCalledPartyNumber field has a weird value starting with b, like b5627368934. Also I cannot seem to determine which column would link together all of the segments of a call for a transferred call, so that I can see all transfers for one actual call (which is why I'm just trying all sorts of different queries right now). Can anyone help me out with an example query to find some transferred calls and list out all of the transfers for each call?
Thanks

Hi,
OriginalCalledPartyNumber beginning with 'b' means conference call to conference Bridge.
Transfered calls you can analyze using lastRedirectDN (redirecting number) field.
Empty callingPartyNumber means that PSTN caller has restricted number presentation.
Detailed CDR description for CCM 4.2.3 you can find at:
http://www.cisco.com/univercd/cc/td/doc/product/voice/vpdd/cdd/4_2/4_2_3/cdr423.pdf
regards,
pk

TS3581 iPhone 4s isn't automatically transferring calls to 2011 Acura MDX HFL.

I'm having issues with my iPhone 4s automatically transferring calls to the 2011 Acura MDX's bluetooth hands free link. I can pair the phone and play audio via bluetooth. IOS 5.1.1. I can force the transfer. Does anyone know how to make the calls automatically transfer?

Transfer a Transferred Call failed

I have issue with Lync, transfer a transferred call always failed, the scenario as following:
User A calls User B (Success)
User B transfer to User C (Success)
User C transfer to User D (Failed)
This issue happens always for all the users whether the call is Lync-to-Lync or PSTN-to-Lync call.
Any help is appreciated

Hi,
Did all user in one site or in different sites? Since when calls are transferred or forwarded, the routing of calls is affected by Location-Based Routing.
You can refer to the link below of “Deployment Process for Location-Based Routing”:
http://technet.microsoft.com/en-us/library/jj994055.aspx
Please also try to disable REFER support. From the Control Panel -> Voice Routing -> Trunk Configuration, open your trunk for the gateway (if you don't have one, open the Global one) and change REFER support to None.
Click OK. Click Commit and commit the changes.
Wait a few minutes and try again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

SPA9000 - transferring calls to my home

Similar Messages

Maybe you are looking for