SPAM update of DMIS stalled with ABAP Short Dump
Hi Experts,
Was wondering if someone could help me. I am trying to install DMIS on my NW 702 system. The installation sort of halted half way and now I am just not able to get into SPAM. Everytime I try to start SPAM the system loops for a good few minutes and it short dumps as below:
Category
ABAP Programming Error
Runtime Errors
TIME_OUT
ABAP Program
SAPLOCS_SEMAPHORE
Application Component BC-UPG-OCS
Trigger Location of Runtime Error
Program SAPLOCS_SEMAPHORE
Include LOCS_SEMAPHOREU02
Row 85
Module type (FUNCTION)
Module Name OCS_QUEUE_SEMAPHORE
55 * OCS is locked, remember this
56 ev_locked = on.
57 * check if OCS is locked by other (OCS) tools
58 IF iv_tool = space. "maybe were are called in batch, check
59 IF sy-batch = off OR
60 ls_pat10-btch_state NA gc_batch_states.
61 * IV_TOOL = space but no batch processing
62 * -> foreign lock, you are not allowed to proceed
63 cs_sema = ls_pat10.
64 RAISE foreign_lock.
65 ENDIF.
66 ELSE.
67 IF ls_pat10-ocs_tool <> iv_tool.
68 * foreign lock, you are not allowed to proceed
69 cs_sema = ls_pat10.
70 RAISE foreign_lock.
71 ENDIF.
72 ENDIF.
73
74 * we are either in batch processing or IV_TOOL matches PAT10
75 * --> own lock, return it
76 IF iv_read_only <> space.
77 cs_sema = ls_pat10.
78 EXIT.
79 ENDIF.
79
ENDIF.
80 * update it
81
ls_pat10 = cs_sema.
82
ls_pat10-responsibl = sy-uname.
83
ls_pat10-imple_date = sy-datum.
84
ls_pat10-imple_time = sy-uzeit.
>>>>>
UPDATE pat10 FROM ls_pat10.
86
cs_sema = ls_pat10.
87 ENDIF. "sy-subrc = 4
88
89 ENDFUNCTION.
4 FUNCTION
SAPLOCS_SEMAPHORE
LOCS_SEMAPHOREU02
85
OCS_QUEUE_SEMAPHORE
3 FUNCTION
SAPLOCS_BATCH
LOCS_BATCHU07
186
OCS_DELETE_BATCH_SEMAPHORE
2 FORM
SAPMSPAM
MSPAMF06
190
READ_N_CHECK_BATCH_JOBS
1 MODULE (PBO) SAPMSPAM
MSPAMO01
776
READ_BATCH_JOBS
Would appreciate if someone can help and has faced something similar.
Regards,
Manish
Hi
The Abap programs get a timeout when trying to update table PAT10 ( OCS Semaphore).
Check in SM12 if there are locks on that table
Check also that table contents, there should be only one entry, what is in field OCS_TOOL ?
DMIS should be installed using transaction SAINT (in client 000) and not SPAM.
Regards
1468391 - Installation and delta upgrade of DMIS 2010_1
Similar Messages
-
Update PSA job failed with the short dump
The process chain has failed at the UPDATE PSA step showing the internal session termination dump...In the dump it is showing the messages as :
"MESSAGE_TYPE_X" " "
"CL_RSSM_PSAPROCESS============CP" or "CL_RSSM_PSAPROCESS============CM007"
"IF_RSPC_EXECUTE~EXECUTE"
Could anyone tell me what may be cause for this kind of issue?
Regards,
IndiraHello Indira,
OK, thanks for that information
The errors you have on your system can also be caused
by having too many entries in table RSPCINSTANCE
Please take a look at SAP note 1410071 and apply the latest
version of this note (with the advanced correction therein)
to your system, which should resolve the problem
Thanks in advance
Barry -
ABAP short dump with "CNTL_ERROR"
Hi,
I am getting an ABAP short dump with "CNTL_ERROR" while using an input script. What do I do?
Thanks,
Sreekar.Hi,
Newer versions of SAP GUI and R/3 include external controls called as ActiveX (OCXs). ABAP code internally issues some commands to flush and refresh these controls. Since, when using GuiXT and input scripting, these controls are not created, and ABAP dumps. Use keyword "Enable controls" (without quotes on a separate line) in a screen block that has an ActiveX control.
Example:
Screen SAPLCOIH.3000
Enter "/Menu=4,1,5"
Screen SAPLSP01.0100
Enter "=No"
Screen RIPLKO10.1000
Enable controls
Set F[Group] "UG"
Enter "/8"
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
Application triggered a termination with a short dump(Assessment error)
Hi,
I created one accessment cycle with couple of segments. While executing this assessment cycle one of the segment is erroring out and it's throwing a runtime error. I searched in OSS and didn't find the right one. I really appreciate your thoughts and answers.
Short text |
The current application triggered a termination with a short dump.
Error analysis
Short text of error message:
Error ERROR_BW_REFBZ
Long text of error message:
Diagnosis
The following program error or handling error has occurred.
Error information:
ERROR_BW_REFBZ
System Response
| Processing is terminated.
Thanks
BrThanks for your quick response Baranyai and we set transfer prices indicator at controlling area level and it's related to profit center valuation. How is going to impact on Assessment cycle and it doesn't appear while creating and executing assessment cycle. I may be wrong and really appreciate your help.
Thanks
Br -
Hi All
We had do done a DBEXPORT of our R/3 4.6C while doing there was a increment conversion pending and we got error during the export, we finished the conversion and then started the DBEXPORT again and it completed successfully, however after this we are receiving ABAP Short dumps which says DBIF_RSQL_INTERNAL_ERROR, Internal error when accessing table "T179 ". Practically for any new entry we do in database.Kindly suggest how to go about.
Regards
ArunHi Micheal
we had done an incremental conversion for DBTABLOG table which is forbidden also was not complete,so we completed the conversion and removed a field which was added in the table (this was cause of error),we removed the field and activated teh table and the short dump was resolved.
Anyway thanks for your reply.
Arun -
Hi BW experts,
when i goto to t-code st22, i find number of runtime errors with name of runtime error as " Message_type_X" and also when i open a msg it says "the current application detected a situation which really shld not occur. Therfore a termionation with a short dump .......""
Can anyone suggest whats happening?? Thank you
DaveHi Dave,
Now when you know the load has failed for the load you did from 1 infoprovider to other then go to the monitor of the failed request and then under status tab you will have short dump pushbutton at the bottom click on that which will take you to the dump after giving R/s ID and p/w there you check the error reason of the dump as said under error analysis.
Or go to RSMO there check out the load for today and try identifying the data target you loaded and then follow the above steps.
Hope it will help..
Regards,
Rohini -
ABAP short dump error while creating an invoice
Hi All,
We are creating a delivery(Unit is EA) for the material for which the Unit Conversion is maintained as 1CS = 48 EA. So while creating a delivery If I maintain the delivered quantity is less than 24, I am not able to create an invoice.It's throwing an ABAP short dump error BCD zerodivide run time error.
If I deliver greater than or equal to 24, then the invoice is created without any issue
I have checked if there is any CMIR record but no record is maintained.
Can anyone help me out on this?
Regards,
ManjunathHi Manju,
Can you post the dump screen shot, which should contain the source code for that dump.
Regards,
Krishna -
ABAP short dump when loading data into Infocube
Hello All,
I am getting an ABAP short dump error when loading data into Infocube. I tried to load data from PSA and ODS.
I ran the code to compress the Infocube, no improvement still getting the same error.
Error Analysis:
A raise statement in the program "SAPLRSDU_PART" raised in the exception.
Internal Notes:
The termination occured in the function "ab_i fune" of the SAP Basis system. Specifically in the line 2316 of the module "//bas/620/src/krn/runt/abfunc. C#18".
The internal operation just processed is "FUNE"
Advance thanks !!!
SivHello Siv,
try to run program SAP_DROP_EMPTY_FPARTITIONS to display existing partitions. Then compare it to the number of uncompressed requests. Maybe there's a mismatch.
SAP notes that might help: 385163, 590370
Regards,
Marc
SAP NetWeaver RIG, US BI -
ZGUIXT16 produces an ABAP short dump
Hi,
The program ZGUIXT16 (intended to generate the local value help files) always stops and produces an ABAP short dump. What could be the reason?
Thanks,
Varsha.Hi,
ZGUIXT16 uses the SAP standard function CHECKTABLE_GET in order to generate the local value help. For some reason, this function aborts for several domains, depending on the R/3 release.
Solution: In ZGUIXT16 some domains are already excluded:
Exclude some domains (error in SAP value list generation):
CHECK DOM-DOMNAME NE: 'HIERANM', 'IM_POSNR', 'IWEXTSYMBL', 'P02_BTRTE'.
Here you can enumerate domains that lead to errors, and then restart the program.
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
How to Fetch Cancelled Jobs info along with the Short Dump Text
Hi Gurus,
I need to develop a report to fetch the cancelled jobs information for the given period. I also need to display the "Error Analysis" part of the Short Dump if it exists.
I am able to fetch the Failed Jobs information and the Job log details using the FM "BP_JOBLOG_READ". But I need to show the "Error Analysis Text" on the report , if there is any Short Dump Exists for the Dump.
Please give me your ideas to fetch the Error Analysis part of the short dump for a given Batch Job Name.
Thanks in Advance.
Best Regards,
SumalathaThe dump information is in table SNAP. You could identify which dump you want by the date & time of the failed job - let's hope you don't have more than one dump with the same time. If it is ambiguous you could also compare the program name of the failed step with the program name in the SNAP data.
The error analysis texts are in table SNAPT keyed according to which error occurred (which is data element code FC right at the start of the first record in the SNAP data). You will have to expand out the includes, and substitute the variable codes using values from the SNAP data. There is standard code to do this that you could copy - see program SAPMS380.
To find out the details of the SAP process you could run transaction ST22 via the debugger and use the same mechanism.
best wishes
Ed
PS Note these details apply to recent systems I think there may be differences if you go back to before ?2004, but I don't have such a system so can't check. You didn't say what release you have. -
Runtime errors COMPUTE_BCD_OVERFLOW
Exception CX_SY_ARITHMETIC_OVERFLOW
I want to move Currency variable with 4 decimals to another currency variable with 2 decimals. Please advice me with a suitable solution without causing short dump.
Appreciate Your Help in Advance.
Thanks.
Kannan.SAP catch the exception like this :
CATCH SYSTEM-EXCEPTIONS conversion_errors = 1
arithmetic_errors = 5.
xkwert = xkomv-kwert * 1000 * xkomv-kpein / komp-mgame.
xkomv-kbetr = xkwert.
ENDCATCH.
IF sy-subrc = 1 OR sy-subrc = 5.
xkomv-kbetr = 0.
xkomv-fxmsg = '802'.
komp-fxmsg = '802'.
ENDIF. -
ABAP short dump after BI upgrade
hi all,
While executing any program in SE38, it is giving Short dump while same program executing in SA38, it is executing .
Firstly, we got short dump in TCode - RSRT, while executing report.
Regards,
Prasad
Edited by: Prasad Mahindrakar on Apr 14, 2010 8:15 AMKindly find the Error, which is generating at time of Report Execution
Error Analysis:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
caught in
procedure "WRITE_DATA" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely "GP42LSZTOVG57DGEB7BO763P3PN ".
However, program "GP42LSZTOVG57DGEB7BO763P3PN " does not exist in the library.
Possible reasons:
a) Wrong program name specified in an external PERFORM or
SUBMIT or, when defining a new transaction, a new
dialog module or a new function module.
b) Transport error -
Data load failing with a short-dump
Hello All,
There is a data load failing with the following short-dump:
Runtime Errors UNCAUGHT_EXCEPTION
Except. CX_FOEV_ERROR_IN_FUNCTION
Full text:
"UNCAUGHT_EXCEPTION" CX_FOEV_ERROR_IN_FUNCTIONC
"CL_RSAR_FUNCTION==============CP" or "CL_RSAR_FUNCTION==============CM004"
"DATE_WEEK"
It seems as if it is failing in a function module - please advise.
Regards,
Keith KibuukaDid you read OSS [Note 872193 - Error in the formula compiler|https://service.sap.com/sap/support/notes/872193] or OSS [Note 855424 - Runtime error UNCAUGHT_EXCEPTION during upload|https://service.sap.com/sap/support/notes/855424]
Regards -
CP Segment - Missing Segments-BIGS2- abap short dump
hi,
i am facing a very typical problem, when i copy character set 8300 from 4.6c to ECC 6 and do the SCP, i have not problem in consistency check but when do the copy of 8300 ->9300 in 4.6c and then export to ECC6 and then run the SCP i have the error BIGS2 - Doesnot exits and when tried to check, it is throwing ABAP DUMP, please find the attached file for more detailed error update
I dont know how to attached the screen shot of the error, please let me know if any more information needed.Hello,
as of WebAS 6.10. the structure of code pages changed.
For that reason, all customer defined code pages (i.e. code pages starting with 9) need to be converted to comply with the new structure, otherwise errors might occur. As you copied SAP Code Page 8300 to 9300, you have to convert this code page with report RSCP0126. Please refer to SAP Note 485455 for details. The application help in transaction SCP also contains a short description.
Hope this helps.
Best Regards,
Michaela -
ABAP short dump when posting to FICO
We are testing payroll on a upgraded version of our live system and recieving an abap error stating an issue with object "COSTS" . This is only occuring when trying to post the results to FICO and only for one particular employee. On searching we have found SAP note 890828 which seems a rather larger problem than just affecting one employee.
Anyone have any idea's?Hi
The ABAP dump should be as follows:
Runtime errors CONNE_IMPORT_WRONG_STRUCTURE
Exception CX_SY_IMPORT_MISMATCH_ERROR
Error when importing object "COSTS".
You need to follow the instructions in note 890828.
The CLASS CL_HR_PAY_RESULT_GB is used by RPCIPE00 in release your upgrade release
You have two choices in the note.
1) a modification in SAP standard to "ignore structure boundaries".
2) run the conversion program RPUSTRCL_COSTS.
Regards
Maybe you are looking for
-
Font Size in Character Mode Report
Hi , I have to print a report in a pre printed Stationary, which has tabular columns The columns are little bit small . when i have bigger data say value like 9999999.45 it over prints on the pre printed text. is it possible to reduce the size of the
-
Ofen imposssible tgo connect. Get the message am working offline but never choose this. This happens no matter where I use my portrable. == This happened == Not sure how often == Frequently when I try to connect
-
Unable to read resource files without fully qualified file names
Hi, I have installed 9iAS and trying to read a few resources in the OC4J container. A few points to note : 1. The <library> element in server.xml (global and instance specific) as well as in orion-application.xml can seem to only scan for jars/zips.
-
what is the most efficient way to convert swf to dvd format? are there more than one way? I'm trying to avoid degradation
-
Using MS Visual C 6.0 and Labview 5.01f I'm trying to write a little C program for a CIN with a 1d-array in it. I've had a look for examples but I either found none with 1d-arrays or the examples were not complete and wouldn't work or even compile. S