Spawning new process Labview 8, and setting frontpanel

I currently have a snippet of code (its messy I'm testing concepts).
That attempts to launch a sub-VI to run in parellel, and communicate back a moving average of the value it collects (though legacy DAQ).
The two VI's communicate via a notifier.
I create a static reference, and open the IV reference, I then set the two notifier.
The problem is within the red square by interacting with the front panel, I put the VI in a state where it cannont execute.
The unlock control is an interaction where I've experimented with restoring the ability for the VI to execute. So far no luck.
Any advice? (Labview 8 Windows XP Service pack 3).

You say you're using LV 8 (it's been a while since I've seen pink error wires), so why are you feeding 0x80 into the OVR function? The LV 8.0 help says the max value is 0x10. I'm going to guess this is your problem.
Also, why are you calling the Unlock Control method? It says it only applies to remote FP connections, so it shouldn't have anything to do with this.
Also, if you want the Run VI method not to block, the wait input should be false.
I suggest you look at the relevant examples in the example finder (Help>>Find Examples) and follow those. There should also be examples online.
Try to take over the world!

Similar Messages

I received a new IMac for Christmas and set up a new .me account and I'm using this on my IMac and IPhone4S. how do I transfer my music from my old Windows iTunes account to my new Mac account?

I received a new IMac for Christmas and set up a new .me account and I'm using this on my IMac and IPhone4S. how do I transfer my music from my old Windows iTunes account to my new Mac account?

You can red this article about transfering your tunes - http://www.myfirstmac.com/index.php/mac/articles/how-do-i-move-my-itunes-library -from-pc-to-mac-and-keep-my-settings-intact
MJ

I got a new iPad last month and set up through iCloud. Still have a message on my screen that it is still restoring from iCloud. How do I get it to complete other than having to rest me start again?

I Got a new iPad last month and sent up in the usually way and syncd to iCloud. However it has ever since shown a comment saying:
Restoring from from I cloud backup
i I have no idea how to get it to complete. Or do I need to re-set and start again?
Help!

Where do you see this message? I know it can take a few hours to restore from an iCloud backup if you had lots of apps, data, movies, camera roll photos etc on it, but it should not take days and daus to finish.
Have you restarted or reset your iPad since you got it? Not the reset that you are talking about - I mean the system reset. Try either or both and see if the message goes away.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support

Open a new File() by Script and set File Type to PDF fails...

Dear all
I'm creating a script to download pdf Files from a server and place them into an Indesign Document. Everything works fine except Indesign does not recocnize the file Type when attempting to place the pdf and throws an error that the downloaded PDF File can not be placed due to unknown Filter.
This is because File type apparently is set to TEXT (Creator is CARO) event though I write the file with
myFile.open('w',"PDF","CARO");
Any Idea how to
- get Indesign set the FileType of a newly generated File to PDF
or
- Change the File Type afterwards
or
- tell Indesign what filter to use when placing this File?
Thanks for your help
BTW: Indesign CS5 (7.0.4), OS X 10.6.8

Thanks John,
but I already had the encoding set to binary, that does not seem to be the problem. I can open the generated File with Acrobat, that works, only Indesign can not place it....

Run workflow when a new item is added and set a fields value

we require a workflow which should run when a new item is added to the form library(infopath) and should update the value of a field "title" with the filename(eg:111.xml).
Please let us know, how we can accomplish it.
Thanks,
Zedprog
My blog: http://sharepointr.com - ZedProg Profile

Hello,
You need to use "Update List Item" action to update any item in list/library. Refer this link for sample:
http://3sharp.com/blog/updating-list-items-with-sharepoint-designer/
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

HT201077 I am a new iphone 5 user and set it up to use icloud to store pictures, etc. I set up my home computer afterwards, but only some pictures are on the icloud. How do I view the rest of my pictures on my home computer? Where are they stored?

Only some of my pictures are on iCloud that are currently stored on my phone. Where are the others? Why aren't all the pictures from my iPhone showing in the iCloud? I can't find the pictures I saved from my ipodtouch, either....

Only some of my pictures are on iCloud that are currently stored on my phone. Where are the others? Why aren't all the pictures from my iPhone showing in the iCloud? I can't find the pictures I saved from my ipodtouch, either....

New computer and setting up itunes and sych iphone new to new computer

hi guys,
Just formatted my hard drive i did backup the iTunes folder inthe c:\users\name\my music\c folder e.g. apps music etc and i did also backup the apple computer folder in the c:\users\name\ app data\roaming\applecomputer folder(which has the iPhone and iPad backups in it),
I have just formatted my hard drive how do i restore iTunes? do you just authorise the computer and then click and drag the music folder into iTunes so all the apps and music go into iTunes and then do you copy and paste the apple computer folder (from the app data folder) to the new computers app data folder? then just plug in the iPhone and sych?
http://blog.deversus.com/2011/02/how-to-sync-iphone-with-new-computer-windows-to -mac/
i did some reading and couldn't find much on how to restore iTunes from a backup there is heaps showing how to back it up! I did find this in the apple discussion forum. ( i think its for people who havennt made a copy of the applecomputer folder.
I just want to recover my itunes so i can just plug in my iphone and i dont loose data from when i did the backup 2 weeks ago, i can just plug in and contine like being on my old computerI
(By design, the iphone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from her phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. Because you are replacing your GF's computer, her phone will see this computer as a "new" computer. The itunes content sync is one way: computer to phone. If you have photos that were synced to her phone or music ripped on her own that were not backed up, you will first have to extract them from her phone using third party software, before you do anything else, as Apple makes no provision to do so:
http://www.wideanglesoftware.com/touchcopy/index.php
Once you've done that, do the following in the order specified:
1. Disable auto sync when an iPod/iPhone is connected under Preferences>Devices in itunes(under the edit menu if using Windows).
2. Make sure you have one contact & one event in the supported applications(Address Book, iCal) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect her phone, iTunes running, do not sync at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on her phone will be in her itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore her itunes content, which you select from the various tabs, You'll get a popup regarding her contacts & calendars asking to merge or replace, select merge.)
What do you guys reckon?
Thanks!

This is the process I would have recommended:
Backup your library using this User Tip.
Deauthorise the old computer if you won't be using it for iTunes.
Restore the library into the music folder on the new computer.
Install iTunes and sign in to your account.
For the "restore" process you can either just copy the backed up iTunes folder into the new computer or install and set up SyncToy to manage the transfer. If you install iTunes before restoring the library then you should delete/rename the existing empty iTunes library in your profile's music folder first.
Reconnecting an old iOS device backup set into a new iTunes installation is actually quite tricky, but provided the library has been properly conserved it is an unnecessary step. A library transferred as outlined above will be the same library the device was previously synced with, albeit on a different computer/operating system, and there should be no problem syncing media or apps. Info content such as calendar and contacts may need a little more care to make sure the same applications have as used previously have been installed and their data restored to them.
tt2

RTD Temperature Measurements using LabView 2013 and MyRio

Hey everyone. I am VERY new to LabView programming and working with a MyRio. I need to figure out how to measure the resistance of a 2 wire RTD to find a temperature utalizing the MyRio and LabView. I am pretty lost on how to do this. Does anyone know some good resources for making the LabView program off of the tops of their heads? I've figured out how to measure from specific pins, but I am not sure how to get it to constantly output a voltage from the output pins.
Eventually, I would like to have it display the temperature as well as have it turn on or off a heater depending on that temperature, but that will come far later in this process. First things first, how do I take temperature measurements utalizing LabView 2013 and a MyRio with a 2 Wire RTD.
Thanks so much!

Hi JoshEpstein87,
The myRIO can't acquire a change in resistance directly, so you'll need to somehow convert the change in resistance to a change in voltage. There are multiple ways to do this, but you'll need to build an external circuit and then read the voltage output with the myRIO. One example of a circuit that allows you to do this can be found here. To output a voltage on the analog output pins, you should just need to set the output voltage and then it will remain at that voltage until you change it or power cycle the myRIO.
To get started with LabVIEW and myRIO programming, see the following page:
http://www.ni.com/myrio/setup/getting-started/
There are some links to LabVIEW training as well as resources about RIO programming. I also highly recommend you check out the myRIO Community as there are example programs on there that you can take a look at to see how they are designed.
Best Regards,
Matthew B.
Applications Engineer
National Instruments

Creating new process through java

Hello,
I wanna create a new "process" through java and wanna do interprocess communication.

Usually the way to make something else run on your computer outside your JVM is to use the Runtime.exec() method.

News stand deleting magazines and can't reinstall in App Store!

I've recently bought a new iPad mini retina and set it up as my old one via iTunes. One thing I've noticed is a few apps have been deleted, no bother there I can just reinstall them however I've noticed one of my magazines in news stand is no longer there. When I go to the App Store and find the magazine it only gives me the option to open, not instal from cloud or anything like that. When I tap open, it does nothing!
Can anyone help?
Thanks

Not sure. Maybe something here:
Fix Purchase Issue with App Store
Mac App Store Customer Service
Mac App Store- Unresponsive after clicking Updates icon
Unable to download OS X Lion wirelessly from Mac App Store - "Your device or computer could not be verified"
Troubleshooting the Mac App Store

Webforms spawns new ifweb60 processes

My configuration:
NT4.0 sp3
Oracle 8.0.5
OAS 4.0.7
Dev60 deployment with patch1 and 2 installed.
After installing patch 1 and 2 to dev60, my webforms would not
work. I then followed a suggestion mentioned earlier by setting
FORMS_TIMEOUT to 0.
Now it works but the server keeps spawning new ifweb60 processes
every 5 seconds or so as long as i am running the webforms
application.
Any suggestions?
Yours,
Rune Skogseide
null

This is the command that executes that hangs:
D:\Oracle\Services\jdk\jre\bin\javaw -server -cp "D:\Oracle\Services\j2ee\home\lib\ojsp.jar;D:\Oracle\Services\reports\jlib\rwrun.jar;D:\Oracle\Services\jlib\zrclient.jar" -Duser.language=sv -Duser.region=SE -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=rep_asapp03_services ORACLE_HOME=D:\Oracle\Services engineimplclass=oracle.reports.engine.EngineImpl cacheDir=D:\AL\RoR\Client\Web\Temp tempDir="D:\AL\RoR\Client\Web\Temp" keepConnection="yes" server_ior="C:\xxxxxxxxxxxxxxxx\Temp\rep_asapp03_services_18500564_1287061324288"
(The x is a localdir)

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

Design the New process set up for Materials in one physical stock plant

Hi Experts,
The requirement is one physical plant as two different logical plants in the system. The main issue is how to administrate or how to find the set up which allows one Physical warehouse in Hamburg which we have supplying two Logical warehouses in the system without having thru really physically separate the warehouses into two different ones. Materials physically will be only for one warehouse.
Requirement is for Design the New process set up for Materials in one physical stock serving plant into two different system plants.
Most of the things are pointing in the direction that order Backlogs will not be converted into new organization. We have backlogs for the material requirements for purchase orders, sales orders whatever we have in the current setup; then there will have all are new orders from the certain dates taking in the new organization set up. These backlogs are very long at least three to four years.
We would like to find some way to have the all the material requirements ending up in one basket instead of two baskets. That still be able to deliver at least in system point of view from two different baskets.
We need to do analysis on one physical stock serving plant into two different system plants that could be done either by material master data or as i understood that could be from PS side.
can any one please tell me how we can maintian this setup in the system.
Please provide your valuable inputs.
Brgds,
RK

RK,
Sorry, the creation of such an end-to-end solution is outside the scope of an online forum. Most consulting companies would send a multi-disciplinary team to perform this task, and would take several weeks to research your requirements, and come up with a prototype.
Sales order availability checking is described in SAP online help
http://help.sap.com/saphelp_erp60_sp/helpdata/en/93/744b51546011d1a7020000e829fd11/frameset.htm
I will say this. If your goal is to have two plants, with two company codes, and you wish to only procure or produce in one of the plants, then generally I would recommend using Special Procurement via Stock Transport Order (in standard SAP, Special Procurement 40). This based on a very small knowledge of your requirements. I have already cited the Sap online help for special procurement.
SAP online help for Warehouse management is at
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f8386f4afa11d182b90000e829fbfe/frameset.htm
As you begin to read the required topics, I am certain you will realize that this task is beyond the capability of an untrained person. I again suggest that you search for professional consulting services to assist you in this project. It will be money well spent.
I am now closing my responses to this thread. Good luck in your project!
Best Regards,
DB49

After restoring my iphone 5 though itunes after updating to the new ios and setting it up as an existing iphone, i unlock my iphone and it tells me i have to connect it to itunes and set it up again but it just stays stuck saying connected to itunes

i just updated to the new ios version, and now i cant set my phone up as an existing one. i have put it in recovery mode and tried to restore it but it wont work. Itunes will let me set it up as an existing phone and back up all my data but once i unlock my phone it goes through the setting up options and then asks me to either set up as a new or existing phone and when i choose existing it just says connect to itunes and does nothing. can anyody help?

Seems like you are restoring from a blank back up if it is still asking you those 3 options of set up as new, restore from itunes or icloud back up. Set the iPhone up as new then manually restore from a back up. Follow the steps foriTunes 10.7 or earlier in the article below as it is the same process for iTunes 11:
http://support.apple.com/kb/ht1766
When you do this you will be able to check for backs showing date and time. Be sure to choose a back up made before you restored to factory settings.

HT201250 I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was?

I use Time Machine to back up my entire computer with my external hard drive. I am getting a brand new iMac this month and was wondering what is the process of using this back up to restore my new computer exactly how my old computer was? I want to make sure I will still have various important files on my new computer, like my songs in iTunes, my photos in iPhoto, etc, etc. Thanks so much in advance!

Welcome to the Apple Support Communities
When you turn on the new iMac for the first time, Setup Assistant will ask you to restore a backup, so connect the external disk and follow steps to restore all your files to your new iMac. Your new Mac will have the same settings and programs as your old computer.
In other cases, I would recommend to restore the whole backup without using Migration Assistant or Setup Assistant, but a Late 2012 iMac uses a special OS X build, so the OS X version that you're using on your old Mac won't work on the new one. For more information, see > http://pondini.org/OSX/Home.html

Spawning new process Labview 8, and setting frontpanel

Similar Messages

Maybe you are looking for