Speed problem with mpegs

When I download or try and watch a quicktime movie online it last like only 5 seconds and it's at the end of the movie. I have uninstalled and reinstalled QT but it still doesn't run at the correct speed. Also if I download it with keep dropping the download so I have to retry several time.

You may have a bad camera card, bad card reader, bad cable or bad USB port. You might want to try different hardware to do the import.

Similar Messages

Synching audio problem with MPEG-4 video in QuickTime

Hello,
I’m having a problem with MPEG-4 video file I created with TechSmith Camtasia (6.0.1).
Problem: The audio does not sync up with the video when played with Apple QuickTime 7.6 (latest build) in Windows Vista. The longer the video plays the more out of sync the audio is. Here's where it gets interesting:
When I play the file using Adobe Media Player or Adobe Flash Player (plug-in in Internet Explorer), the video and audio sync up and all is good.
Is there a problem with how Quicktime decompresses this type of file?
Does anyone have any idea what is happening?
Thanks,
Leo

If I remember well, N70 plays mp4 video without problems. Try resizing during encoding to 176 x 144 and reducing frame rate to 15 frames per second. Also try to keep data rate below 200 kb/s. If you are using MediaCoder do not go with default settings for Nokia N70, they are too optimistic.
Here is link to document titled Creating Mobile Videos
http://www.forum.nokia.com/info/sw.nokia.com/id/b0c449c1-8e67-4c60-bd50-18a2b4f1e09b/Creating_Mobile...
Hope it helps.
www.2010-solutions.co.za

Do you encounter speed problem with time capsule

I have speed problem with my networth using time capsule

What's your Modem? If you are using DSL (ADSL) or fiber optical ?

Problems With MPEG-2 Codec

I've been having problems with Apple's MPEG-2 codec for Quicktime.
All my 640x480 movies are labeled as 720x480, and when I convert them to .mp4 with VisualHub (third party software) it stretches them to 720x480. It didn't do this before I got the codec.
Is there any way to fix this?
Alternatively, how do I uninstall the codec?
Thanks.

I am using the Sony HVR-Z1U camera. I have firewire connection on the camera that I have connected a Sony HVR-MRC1K memory recording unit to. The tape in camera starts the recording then the digital recording kicks on. I have to always have a tape in camera to start recording onto firewire connect digital hard drive recorder. As I mentioned in my previous post, the HVR-MRC1K records to a 32 gb compact flash high speed card and saves files as M2T files (MPEG2) I covert/transcode the files using Clip Wrap software to Quicktime .MOV files. I am them able to import them into FCP X and or iMovie. Once in FCP X the files play, but will skip or drop frames. Again there is no issue on my other mac using FCP 7. I don't even have to transcode files in Clip Wrap. They import automatically using a connected USB drive and Compact Flash Card. I really would like to use FCP X and move forward and not have to take a step backward using only FCP 7. I am in Fort Myers Florida. There is an Apple store nearby in Estero, Florida and one a little further in Naples Florida. I have only gone to the Estero Florida store. The Naples store had FCP classes only twice a week and the Estero store had none.

Mouse Scroll speed problems with JVM

I could not find Java (Apple’s JVM ) forums, so I might be posting this in the wrong forum. With that disclaimer, here is my issue:
I am running into a problem where the mouse-wheel scrolling speed configurations are not being properly passed to Java applications. I have set my scrolling speed to the maximum, all works well with regula apps, yet when I use my mouse-wheel to scroll and window in a Java application, scrolling it is unbearably slow, the wheel becomes useless.
Also, horizontal scrolling does not work in any java application either.
I believe these are a problem with Apple's JVM implementation. Are there any workarounds?
Has anyone else experience this?
JVM v1.5

Does this happen with all Java apps or just a handful? I ask because I found that OpenOffice scrolls so slowly that it's unusable. However, I think this is an issue with OO, not with Java. Other Java apps scroll fine for me.

Bad noise/ fan speed problem with Rev B iMac

Like a lot of other people, I'm having problems with ridiculous fan noise. I've read through the forum and tried the following (with no success):
1) Reset SMU (x2)
2) Ran Maintenance Scripts. (x2)
3) Removed the back and blew dust from fans, ports, etc.
The processor is set to automatic. The problem occurs whether or not I have any peripherals plugged in. I get the noise/rpms when all I have running is Safari and XRG.
On certain websites, the CPU fan will climb to 5600, CPU temp to 79C, with CPU usage at 80-90%.
Does this sound like a logic board problem? Something else, possibly?
Basically, I'm trying to cover all of my bases before I get on the phone with AppleCare. I'd like to try to keep that as short as possible. Thanks in advance for any help/comments.
iMac G5 (ALS) 17" 2.0GHz 512MB RAM Superdrive Mac OS X (10.4.8)
iMac G5 (ALS) 17" 2.0GHz 512MB RAM Superdrive Mac OS X (10.4.8)

Just an FYI. During my iMacs motherboard replacements (3) I was never asked for a case number once. I spent hours on the phone with Applecare when in reality I already new I had a hardware problem and if I would have just taken it in it would have been fixed quicker. The third time I took my iMac G5 in for service the local tech told me to call up Applecare (3rd time then call) and ask for a replacement stating that if they need to call me he would explain that I had a lemon. In everyone of the three bad motherboards the fans spun out of control so I have more experience than I would prefer on this subject. They did step up and as you can see in my profile I have a new Intel iMac courtesy of Apple.
Also a utility to measure your fan speeds is here: http://www.gauchosoft.com/Software/X%20Resource%20Graph/

Speed problems, with contradictory stats.

Greetings all, I hope theres someone who can help around here.
This connection has been troublesome for a couple of years now and I'd like advice on two fronts.
1) making sense of some of the stats I'm about to post so that its caused by what I think it is.
2) how do I get BT to recalculate my ip profile quickly? I'll Explain why below.
so, here are the numbers
BT speedtest
Download speedachieved during the test was - 119 Kbps
For your connection, the acceptable range of speeds is 50-250 Kbps.
Additional Information:
Your DSL Connection Rate :160 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 250 Kbps
Speedtest.net
http://www.speedtest.net/result/1228706324.png
Router (v1, but v2 gave the same values)
Downstream
160 Kbps
Upstream
448 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.1 Annex A
Latency type
Interleaved
Noise margin (Down/Up)
13.6 dB / 13.0 dB
Line attenuation (Down/Up)
65.5 dB / 31.5 dB
Output power (Down/Up)
0.5 dBm / 1.1 dBm
Loss of Framing (Local/Remote)
0 / 0
Loss of Signal (Local/Remote)
0 / 0
Loss of Power (Local/Remote)
0 / 0
FEC Errors (Down/Up)
1471 / 87
CRC Errors (Down/Up)
706 / 42
HEC Errors (Down/Up)
390 / 22
Error Seconds (Local/Remote)
409 / 36
All of my woes in the past have been caused by momentary interruptions to the line, which is to be expected in Rural Lincolnshire 2k from the phone exchange thats been stocked with ancient eqipment and connected with lines decades old to houses with decades old wiring.
the mometary interruptions seemed to cause the ip profile to go screwy so that the phone exchange refuses to relinquish download bandwidth to me, at my computer I am DLing at 15kbs
as you can see the upload speed is much faster than the download, and supports the notion that the line itself is capable of handling higher speeds.
The ping is an interesting consideration as its at 57ms, yesterday it was 250ms and would shoot up to 1000ms the second you actually tried doing anything.
this happens quite often as out here in the sticks power cuts and other interruptions are to be expected, and while it get frustrated at paying the same as a city go-er who gets 8MB broadband, I understand that BT can't be expected to provide perfect service in such a large sparsely populated area.
So, how do I deal with this? in teh past I've phoned up and had to do a song and dance routine to get to someone who would give me the number to the engineering dept so that someone with expertise can talk to me, who would promise to leave a call at the phone exchange for the guy to fix me up...thats alot of money down the drain on the call and alot of my time wasted just so that I can be told "please don't disconnect your router for 72hrs so that blah blah"
covering my bases (for anyone who thinks its a problem on my end)
tried different microfilters
3 different computers with different OS's, AVs etc all find same problem
2 different routers (both BT home hubs, one v1 and one v2)
tried reseting routers multiple times and to factory settings
router is in the master telephone socket which goes directly to the main line outside
right now performance is so low that I cannot watch a youtube video in real time with it on the lowest possible resolution (ordinarily I can watch one at 360, not great but acceptable.
If I leave the router plugged in and nothing interrupts it, then eventually this will fix itself, shortest time for this has been 12hrs, the longest has been 1 week. While the internet is indeed a source of great personal enjoyment for me and others in this household, its also something we came to rely on professionally and organisationally before we came to this house. a week where simply checking your e-mail takes 10x longer or viewing even a simple .jpeg file takes several minutes causes immense frustration and setback.
If anyone can help on any issue here, I would be most grateful.
Solved!
Go to Solution.

Hi I understand your problems unfortunately you are at the end of a very long line your attenuation figures show your line length as 4.7km from the exchange and with a perfect line you may get 1.6mb however that is an ideal world your disconnections are the cause of low speed as you say this reduces your IP profile unfortunately as the setting of the ip profile is automatic all you can do is wait the typical 3/5 days of stable connection for your profile to restore there is no faster way of restoring it i am afraid as even intervention here by the board mods need a minimum of 3 days stable connection before bt wholesale will raise the profile yo could check you phone line for any noise on voice calls by dialling 17070 and selecting option 2 you should here no noise preferably using a corded phone in the test socket at the back of the master socket any noise heard should be reported as an voice fault phone 151 and report it however do not mention broadband if there is any noise once solved your broadband should improve accordingly after a few days
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Avidemux audio sync problem with MPEG-2 - alt. way to cut mpeg-2

I have a PVR-250 and when I load up an MPEG-2 file that it generated in Avdimux, the audio/video is out of sync (before I make any edits). My goal is simply to cut out commercials in the file, nothing else. When I play it in any other viewer (vlc, mplayer, etc.) the sync is perfect. I found that this is known issue with Avidemux. See below.
Can you guys recommend another piece of software I can use to simply cut parts out of mpeg-2 files?
Taken from mythtv wiki page. I quoted the relevant text from it here:
Cory Papenfuss noted:
I would just like to add again that this procedure only works 95% of the time for broadcast/cable captures... about 80% of the time for tape transfers. Avidemux cannot deal with chaining A/V sync throughout the file, and this method will have broken sync with one of these unfortunate captures. The author of avidemux acknowledges this limitation, but says a fair bit of internal work would be needed to fix it.

Thanks, I suppose I can start batch-converting my mjpg movies before importing them inte PE7, if that would make this problem disappear. I'll try that (I have FormatFactory installed, but VirtualDub seems like a nice tool if that is better), although that would make the process a bit more long-winded...
Regarding GSPOT info on a file that works and one doesn't, there are typically no difference between them (except length and content, of course). In fact, as I mentioned above, the same movie did not work until I did some reinstalling, clearing caches etc. Then the same movie suddenly worked OK again.
I attach the GSPOT info on that file.
(I never had this problem on my older XP system that run PE2...).
I will try converting to see if the problem disappears.
Thanks!
// G

Problem with MPEG-4 video file in N70

I wanted to transfer MPEG-4 video files from my computer to my N70 phone. I put the files to the same place where others videos are, and when I tried to watch MPEG-4 video it complained that the phone can't repeat it.
I checked from nokia sites that my phone should actually repeat them with RealPlayer, but for some reason i cant watch the video, allthough all my other videos which i've taken with my phone are also MPEG-4. So is there anything i can do??
Sorry for my bad english. Im from Finland and 15 years old, so ...

If I remember well, N70 plays mp4 video without problems. Try resizing during encoding to 176 x 144 and reducing frame rate to 15 frames per second. Also try to keep data rate below 200 kb/s. If you are using MediaCoder do not go with default settings for Nokia N70, they are too optimistic.
Here is link to document titled Creating Mobile Videos
http://www.forum.nokia.com/info/sw.nokia.com/id/b0c449c1-8e67-4c60-bd50-18a2b4f1e09b/Creating_Mobile...
Hope it helps.
www.2010-solutions.co.za

Are sprint and apple trying to fix the 3g speed problem with the iphone 4s?

Ive had my 4s for about a month now, and i am about 50% happy with it. The internet speed is so slow when im not on wi-fi, and
in the evenings the picture mail service is so slow, since it runs on the 3g network. Ive sat back and waited to see if it gets better, but
doesn't look like it has. I haven't even seen where sprint nor apple have stated that there is a problem, and that really makes me mad.
Why did i pay $200 for an iphone that I cant even use to the full advatange people. Sprint and Apple really need to make a statement and
fix this problem, they are going to loose a lot of customers. Thanks.

We're all users here. We have no more access to information than you do.

Speed problems with dual band AEBS

I got the new dual band AEBS to replace a belkin b/g router I had and so far it has been a headache. When it started it had 7.4.0 I think and it had speed issues. Certain web sites would take forever to load, even on my imac that was hardwired to the router. My wife's MacBook 1.8 ghz Core Duo (802.11g) had a strong signal but the speed on the web was also really slow, almost like dial up speeds.
I upgraded to 7.4.1 and the speed on the locally attached computer got way better, but my wife's laptop still is acting really slow over wireless.
I wanted to hook up my 2 TB raid to the thing as a AirDisk, but so far I don't trust the router enough to do it. Its a bit dissapointing as I am a real Apple fan in general.
Questions -
1) should I go to 7.3.2? Is this even possible with a dual band device?
2) is it possible that her laptop is trying to get on the wrong network and going slow for that reason?

I'm having the very same problem. Although I've upgraded to the new dual-band ABS (from ABSE), I was getting slower speeds on wireless after the 7.4.1 upgrade. In fact some of the speeds occasionally approach near dial-up while the Mac wired to the ABS is getting near DSL speeds. Very annoying.

Installation / speed problems with Infinity

I had Infinity 1 installed in mid September. I was promised 40.8Mb/s download and 6.1Mb/s upload, so I went for Infinity 1, knowing that the download would be capped at 38Mb/s.
When the Openreach engineer did the installation, he failed to check that our telephone extensions worked before he left. Unfortunately the main extension (with our main phone on) was not connected back in properly and didn't work. I reported this as a fault on the day, but fixed the wiring myself and cancelled the fault 24 hours later.
Since day 1 our broadband download speed has never got above 20Mb/sec. I finally reported this as a fault this week and have spent many a long hour since on calls to various customer services / engineering teams trying to get it resolved. There was discussion about whether it was a fault with the line, that there was an outage at our exchange etc. etc. I've done all of the tests asked, including resetting the Modem, disconnecting everything else from the Hub, disconnecting the phone lines from the Master socket etc., but none of these have increased the rate and the IP profile is still hovering around 19-20 Mb/sec. They think that the profile may have got locked to a low value when the fault was first reported on the line.
I'm now being told that the only thing I can do is request an engineer visit with the possibility of a £130 fee if they deem that the fault is due to anything in the property.
Can the IP Profile be reset remotely? I've seen a few people on here complaining that they have been charged for a visit that they did not feel was their responsibility. I really don't want the threat of this and have held off agreeing to a visit as I feel I have never received the product I signed up for.
Does anyone know either how to get my issue resolved without an engineer visit, or am I being unreasonable to expect a visit without the risk of a big fee?
All in all I've been disappointed with the lack of customer services from BT.
Many thanks,
Colin

Your problem is that you have had a faulty install most likely as it was a contractor who did it as an Openreach engineer wold have shown you everything working correctly.
You have compounded the error by trying to fix it yourself instead of reporting a phone line fault and awaiting an engineer to correct.
I'm going to flag this for a mod who will help you through it as IMHO you should not be charged for the faulty install to be rectified.
Please note:- Once you have contactec=d the mods via the link you will be given it will take 3-5 days for them to get back to you.
You are best advised not to contact BT in that time but to wait for the mods who will be your one point of contact until resolution.

Internet upload speed problems with 10.6.8?, internet upload speed problems with 10.6.8?

Since upgrading to Snow Leopard in November 2013, internet connection speed has been slow. Using ATT DSL at advertised speeds of 3.0 M download and 0.3 M upload. Download is acceptable at 2.55 M average using Speedtest.net. Upload is very slow at 0-0.1. ATT has checked everthing and says its ok. They gave me updated Netgear 7550 modem that didn't make a difference but is more modern that my original 2-Wire 1000. They checked inside and outside lines. They run a test of my modem and get 0.5 M upload, yet using my iMac and Speedtest.net, I get much less which is consistent with online experience. Pages are slow to start download, and sending photos with email is very slow. Could my iMac with 10.6.8 be the problem?

OK, two things to try:
Do you have Javascript activated (not Java)?
Is your version of Flash Player up to date?
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Version 11.4.402.265 is for Snow Leopard onwards.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Clock speed problem with MSI K8M Neo-V

Hi all,
I'm a newbie on all this tasks of mounting my own PC, so I'm very sorry if my question is stupid and is already answered in the forum (I didn't find it).
I have the following components:
- MSI K8M Neo-V
- 2 SATA HD 160 Gb
- AMD Athlon(tm) 64 Processor 3200+
- 512 MB (PC3200 DDR SDRAM)
My problem is that I cannot get my AMD 3200 to run at 3200 Mhz. What I
only get is:
- CPU ratio x11
- CPU FSB clock 210
- Dynamic overclocking colonel (my BIOS doesn't have general or
commander, as shown in manual)
That makes a total of 2.31 Mhz, far away from the 3.2 desired.
If I try to change this values to others higher (such as FSB 230), I get a black screen
and I need to reset BIOS.
Please, could you help me solve this situation? I find it really
disturbing to have bought a new AMD 64 3200 with a good motherboard,
and not being able to make it run at the appropiate speed.
Thank you very much in advance.

3.2GHz. Wow. I would kill to have an A64 at that speed. :D
Quote from: Tiresmoke on 14-April-05, 23:19:47
AMD's don't run at the speed they have listed on the CPU, rather that is a performance equivalent number. In this instance your CPU has the equivalent performance of an Intel that runs at 3200Mhz.
Actually I believe the Performance number equivalent to the MHz an AMD Thunderbird would be at, NOT an Intel CPU.

Memory speed problems with Neo2 Platinum

Hi all -- I'm trying to figure out a problem I'm having getting my memory frequency up to speed. Right now I have two 512MB sticks of Crucial Ballistix PC4000 RAM but I can't get them running any faster than 166Mhz each (or 333 Mhz DDR). I'm using a AMD Athlon 64 3500+ processor and I've got my ratio set to "auto." Is there a memory frequency setting I'm missing? How can I get these sticks up to speed?
Thanks!

dont worry - i did exactly the same! Not sure if was being a bit slow or the manual is written badly but it confused me
Out of curiosity what is core center reporting your cpu temp as? Mine says around 58c but im not sure if its just being reported wrongly ( even though a few people have said this 1.2 bios fixes the temp isssue ).

Speed problem with mpegs

Similar Messages

Maybe you are looking for